Vulnerabilities (CVE)

Filtered by vendor Linux Subscribe
Total 19806 CVE
CVE Vendors Products Updated CVSS v2 CVSS v3
CVE-2024-50167 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: be2net: fix potential memory leak in be_xmit() The be_xmit() returns NETDEV_TX_OK without freeing skb in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it.
CVE-2024-50166 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: fsl/fman: Fix refcount handling of fman-related devices In mac_probe() there are multiple calls to of_find_device_by_node(), fman_bind() and fman_port_bind() which takes references to of_dev->dev. Not all references taken by these calls are released later on error path in mac_probe() and in mac_remove() which lead to reference leaks. Add references release.
CVE-2024-50163 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: bpf: Make sure internal and UAPI bpf_redirect flags don't overlap The bpf_redirect_info is shared between the SKB and XDP redirect paths, and the two paths use the same numeric flag values in the ri->flags field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that if skb bpf_redirect_neigh() is used with a non-NULL params argument and, subsequently, an XDP redirect is performed using the same bpf_redirect_info struct, the XDP path will get confused and end up crashing, which syzbot managed to trigger. With the stack-allocated bpf_redirect_info, the structure is no longer shared between the SKB and XDP paths, so the crash doesn't happen anymore. However, different code paths using identically-numbered flag values in the same struct field still seems like a bit of a mess, so this patch cleans that up by moving the flag definitions together and redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make sure the overlap is not re-introduced by mistake.
CVE-2024-50160 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/cs8409: Fix possible NULL dereference If snd_hda_gen_add_kctl fails to allocate memory and returns NULL, then NULL pointer dereference will occur in the next line. Since dolphin_fixups function is a hda_fixup function which is not supposed to return any errors, add simple check before dereference, ignore the fail. Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVE-2024-50158 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix out of bound check Driver exports pacing stats only on GenP5 and P7 adapters. But while parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This caused a trace when KASAN is enabled. BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re] Write of size 8 at addr ffff8885942a6340 by task modprobe/4809
CVE-2024-50157 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop Driver waits indefinitely for the fifo occupancy to go below a threshold as soon as the pacing interrupt is received. This can cause soft lockup on one of the processors, if the rate of DB is very high. Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th if the loop is taking more time. Pacing will be continuing until the occupancy is below the threshold. This is ensured by the checks in bnxt_re_pacing_timer_exp and further scheduling the work for pacing based on the fifo occupancy.
CVE-2024-50156 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/msm: Avoid NULL dereference in msm_disp_state_print_regs() If the allocation in msm_disp_state_dump_regs() failed then `block->state` can be NULL. The msm_disp_state_print_regs() function _does_ have code to try to handle it with: if (*reg) dump_addr = *reg; ...but since "dump_addr" is initialized to NULL the above is actually a noop. The code then goes on to dereference `dump_addr`. Make the function print "Registers not stored" when it sees a NULL to solve this. Since we're touching the code, fix msm_disp_state_print_regs() not to pointlessly take a double-pointer and properly mark the pointer as `const`. Patchwork: https://patchwork.freedesktop.org/patch/619657/
CVE-2024-50155 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: netdevsim: use cond_resched() in nsim_dev_trap_report_work() I am still seeing many syzbot reports hinting that syzbot might fool nsim_dev_trap_report_work() with hundreds of ports [1] Lets use cond_resched(), and system_unbound_wq instead of implicit system_wq. [1] INFO: task syz-executor:20633 blocked for more than 143 seconds. Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:25856 pid:20633 tgid:20633 ppid:1 flags:0x00004006 ... NMI backtrace for cpu 1 CPU: 1 UID: 0 PID: 16760 Comm: kworker/1:0 Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events nsim_dev_trap_report_work RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:210 Code: 89 fb e8 23 00 00 00 48 8b 3d 04 fb 9c 0c 48 89 de 5b e9 c3 c7 5d 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0c 25 c0 d7 03 00 65 8b 15 60 f0 RSP: 0018:ffffc90000a187e8 EFLAGS: 00000246 RAX: 0000000000000100 RBX: ffffc90000a188e0 RCX: ffff888027d3bc00 RDX: ffff888027d3bc00 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88804a2e6000 R08: ffffffff8a4bc495 R09: ffffffff89da3577 R10: 0000000000000004 R11: ffffffff8a4bc2b0 R12: dffffc0000000000 R13: ffff88806573b503 R14: dffffc0000000000 R15: ffff8880663cca00 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc90a747f98 CR3: 000000000e734000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 000000000000002b DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 spin_unlock_bh include/linux/spinlock.h:396 [inline] nsim_dev_trap_report drivers/net/netdevsim/dev.c:820 [inline] nsim_dev_trap_report_work+0x75d/0xaa0 drivers/net/netdevsim/dev.c:850 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK>
CVE-2024-50149 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't free job in TDR Freeing job in TDR is not safe as TDR can pass the run_job thread resulting in UAF. It is only safe for free job to naturally be called by the scheduler. Rather free job in TDR, add to pending list. (cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d)
CVE-2024-50147 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix command bitmask initialization Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit isn't Initialize during command bitmask Initialization, only during MANAGE_PAGES. In addition, mlx5_cmd_trigger_completions() is trying to trigger completion for MANAGE_PAGES command as well. Hence, in case health error occurred before any MANAGE_PAGES command have been invoke (for example, during mlx5_enable_hca()), mlx5_cmd_trigger_completions() will try to trigger completion for MANAGE_PAGES command, which will result in null-ptr-deref error.[1] Fix it by Initialize command bitmask correctly. While at it, re-write the code for better understanding. [1] BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078 CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 kasan_report+0xb9/0xf0 kasan_check_range+0xec/0x190 mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] mlx5_cmd_flush+0x94/0x240 [mlx5_core] enter_error_state+0x6c/0xd0 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core] process_one_work+0x787/0x1490 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0xda0/0xda0 ? assign_work+0x168/0x240 worker_thread+0x586/0xd30 ? rescuer_thread+0xae0/0xae0 kthread+0x2df/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK>
CVE-2024-50144 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix unbalanced rpm put() with fence_fini() Currently we can call fence_fini() twice if something goes wrong when sending the GuC CT for the tlb request, since we signal the fence and return an error, leading to the caller also calling fini() on the error path in the case of stack version of the flow, which leads to an extra rpm put() which might later cause device to enter suspend when it shouldn't. It looks like we can just drop the fini() call since the fence signaller side will already call this for us. There are known mysterious splats with device going to sleep even with an rpm ref, and this could be one candidate. v2 (Matt B): - Prefer warning if we detect double fini() (cherry picked from commit cfcbc0520d5055825f0647ab922b655688605183)
CVE-2024-50140 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: sched/core: Disable page allocation in task_tick_mm_cid() With KASAN and PREEMPT_RT enabled, calling task_work_add() in task_tick_mm_cid() may cause the following splat. [ 63.696416] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 63.696416] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 610, name: modprobe [ 63.696416] preempt_count: 10001, expected: 0 [ 63.696416] RCU nest depth: 1, expected: 1 This problem is caused by the following call trace. sched_tick() [ acquire rq->__lock ] -> task_tick_mm_cid() -> task_work_add() -> __kasan_record_aux_stack() -> kasan_save_stack() -> stack_depot_save_flags() -> alloc_pages_mpol_noprof() -> __alloc_pages_noprof() -> get_page_from_freelist() -> rmqueue() -> rmqueue_pcplist() -> __rmqueue_pcplist() -> rmqueue_bulk() -> rt_spin_lock() The rq lock is a raw_spinlock_t. We can't sleep while holding it. IOW, we can't call alloc_pages() in stack_depot_save_flags(). The task_tick_mm_cid() function with its task_work_add() call was introduced by commit 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid") in v6.4 kernel. Fortunately, there is a kasan_record_aux_stack_noalloc() variant that calls stack_depot_save_flags() while not allowing it to allocate new pages. To allow task_tick_mm_cid() to use task_work without page allocation, a new TWAF_NO_ALLOC flag is added to enable calling kasan_record_aux_stack_noalloc() instead of kasan_record_aux_stack() if set. The task_tick_mm_cid() function is modified to add this new flag. The possible downside is the missing stack trace in a KASAN report due to new page allocation required when task_work_add_noallloc() is called which should be rare.
CVE-2024-50137 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC data->asserted will be NULL on JH7110 SoC since commit 82327b127d41 ("reset: starfive: Add StarFive JH7110 reset driver") was added. Add the judgment condition to avoid errors when calling reset_control_status on JH7110 SoC.
CVE-2024-50136 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Unregister notifier on eswitch init failure It otherwise remains registered and a subsequent attempt at eswitch enabling might trigger warnings of the sort: [ 682.589148] ------------[ cut here ]------------ [ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered [ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90 [...snipped] [ 682.610052] Call Trace: [ 682.610369] <TASK> [ 682.610663] ? __warn+0x7c/0x110 [ 682.611050] ? notifier_chain_register+0x3e/0x90 [ 682.611556] ? report_bug+0x148/0x170 [ 682.611977] ? handle_bug+0x36/0x70 [ 682.612384] ? exc_invalid_op+0x13/0x60 [ 682.612817] ? asm_exc_invalid_op+0x16/0x20 [ 682.613284] ? notifier_chain_register+0x3e/0x90 [ 682.613789] atomic_notifier_chain_register+0x25/0x40 [ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core] [ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core] [ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core] [ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core] [ 682.616789] sriov_numvfs_store+0xb0/0x1b0 [ 682.617248] kernfs_fop_write_iter+0x117/0x1a0 [ 682.617734] vfs_write+0x231/0x3f0 [ 682.618138] ksys_write+0x63/0xe0 [ 682.618536] do_syscall_64+0x4c/0x100 [ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53
CVE-2024-50133 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: LoongArch: Don't crash in stack_top() for tasks without vDSO Not all tasks have a vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL vdso pointer and crash. This can for example happen when using kunit: [<9000000000203874>] stack_top+0x58/0xa8 [<90000000002956cc>] arch_pick_mmap_layout+0x164/0x220 [<90000000003c284c>] kunit_vm_mmap_init+0x108/0x12c [<90000000003c1fbc>] __kunit_add_resource+0x38/0x8c [<90000000003c2704>] kunit_vm_mmap+0x88/0xc8 [<9000000000410b14>] usercopy_test_init+0xbc/0x25c [<90000000003c1db4>] kunit_try_run_case+0x5c/0x184 [<90000000003c3d54>] kunit_generic_run_threadfn_adapter+0x24/0x48 [<900000000022e4bc>] kthread+0xc8/0xd4 [<9000000000200ce8>] ret_from_kernel_thread+0xc/0xa4
CVE-2024-50130 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: netfilter: bpf: must hold reference on net namespace BUG: KASAN: slab-use-after-free in __nf_unregister_net_hook+0x640/0x6b0 Read of size 8 at addr ffff8880106fe400 by task repro/72= bpf_nf_link_release+0xda/0x1e0 bpf_link_free+0x139/0x2d0 bpf_link_release+0x68/0x80 __fput+0x414/0xb60 Eric says: It seems that bpf was able to defer the __nf_unregister_net_hook() after exit()/close() time. Perhaps a netns reference is missing, because the netns has been dismantled/freed already. bpf_nf_link_attach() does : link->net = net; But I do not see a reference being taken on net. Add such a reference and release it after hook unreg. Note that I was unable to get syzbot reproducer to work, so I do not know if this resolves this splat.
CVE-2024-50129 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: net: pse-pd: Fix out of bound for loop Adjust the loop limit to prevent out-of-bounds access when iterating over PI structures. The loop should not reach the index pcdev->nr_lines since we allocate exactly pcdev->nr_lines number of PI structures. This fix ensures proper bounds are maintained during iterations.
CVE-2024-50126 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: net: sched: use RCU read-side critical section in taprio_dump() Fix possible use-after-free in 'taprio_dump()' by adding RCU read-side critical section there. Never seen on x86 but found on a KASAN-enabled arm64 system when investigating https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa: [T15862] BUG: KASAN: slab-use-after-free in taprio_dump+0xa0c/0xbb0 [T15862] Read of size 4 at addr ffff0000d4bb88f8 by task repro/15862 [T15862] [T15862] CPU: 0 UID: 0 PID: 15862 Comm: repro Not tainted 6.11.0-rc1-00293-gdefaf1a2113a-dirty #2 [T15862] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-20240524-5.fc40 05/24/2024 [T15862] Call trace: [T15862] dump_backtrace+0x20c/0x220 [T15862] show_stack+0x2c/0x40 [T15862] dump_stack_lvl+0xf8/0x174 [T15862] print_report+0x170/0x4d8 [T15862] kasan_report+0xb8/0x1d4 [T15862] __asan_report_load4_noabort+0x20/0x2c [T15862] taprio_dump+0xa0c/0xbb0 [T15862] tc_fill_qdisc+0x540/0x1020 [T15862] qdisc_notify.isra.0+0x330/0x3a0 [T15862] tc_modify_qdisc+0x7b8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Allocated by task 15857: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_alloc_info+0x40/0x60 [T15862] __kasan_kmalloc+0xd4/0xe0 [T15862] __kmalloc_cache_noprof+0x194/0x334 [T15862] taprio_change+0x45c/0x2fe0 [T15862] tc_modify_qdisc+0x6a8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Freed by task 6192: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_free_info+0x4c/0x80 [T15862] poison_slab_object+0x110/0x160 [T15862] __kasan_slab_free+0x3c/0x74 [T15862] kfree+0x134/0x3c0 [T15862] taprio_free_sched_cb+0x18c/0x220 [T15862] rcu_core+0x920/0x1b7c [T15862] rcu_core_si+0x10/0x1c [T15862] handle_softirqs+0x2e8/0xd64 [T15862] __do_softirq+0x14/0x20
CVE-2024-50123 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.1 HIGH
In the Linux kernel, the following vulnerability has been resolved: bpf: Add the missing BPF_LINK_TYPE invocation for sockmap There is an out-of-bounds read in bpf_link_show_fdinfo() for the sockmap link fd. Fix it by adding the missing BPF_LINK_TYPE invocation for sockmap link Also add comments for bpf_link_type to prevent missing updates in the future.
CVE-2024-50122 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: PCI: Hold rescan lock while adding devices during host probe Since adding the PCI power control code, we may end up with a race between the pwrctl platform device rescanning the bus and host controller probe functions. The latter need to take the rescan lock when adding devices or we may end up in an undefined state having two incompletely added devices and hit the following crash when trying to remove the device over sysfs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Call trace: __pi_strlen+0x14/0x150 kernfs_find_ns+0x80/0x13c kernfs_remove_by_name_ns+0x54/0xf0 sysfs_remove_bin_file+0x24/0x34 pci_remove_resource_files+0x3c/0x84 pci_remove_sysfs_dev_files+0x28/0x38 pci_stop_bus_device+0x8c/0xd8 pci_stop_bus_device+0x40/0xd8 pci_stop_and_remove_bus_device_locked+0x28/0x48 remove_store+0x70/0xb0 dev_attr_store+0x20/0x38 sysfs_kf_write+0x58/0x78 kernfs_fop_write_iter+0xe8/0x184 vfs_write+0x2dc/0x308 ksys_write+0x7c/0xec