Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-53202 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix possible resource leak in fw_log_firmware_info() The alg instance should be released under the exception path, otherwise there may be resource leak here. To mitigate this, free the alg instance with crypto_free_shash when kmalloc fails. | |||||
| CVE-2024-53200 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in hwss_setup_dpp This commit addresses a null pointer dereference issue in hwss_setup_dpp(). The issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure `pipe_ctx->plane_state` is not null before accessing. This prevents a null pointer dereference. | |||||
| CVE-2024-53199 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-audmix: Add NULL check in imx_audmix_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in imx_audmix_probe() is not checked. Add NULL check in imx_audmix_probe(), to handle kernel NULL pointer dereference error. | |||||
| CVE-2024-53197 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices A bogus device can provide a bNumConfigurations value that exceeds the initial value used in usb_get_configuration for allocating dev->config. This can lead to out-of-bounds accesses later, e.g. in usb_destroy_configuration. | |||||
| CVE-2024-53194 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix use-after-free of slot->bus on hot remove Dennis reports a boot crash on recent Lenovo laptops with a USB4 dock. Since commit 0fc70886569c ("thunderbolt: Reset USB4 v2 host router") and commit 59a54c5f3dbd ("thunderbolt: Reset topology created by the boot firmware"), USB4 v2 and v1 Host Routers are reset on probe of the thunderbolt driver. The reset clears the Presence Detect State and Data Link Layer Link Active bits at the USB4 Host Router's Root Port and thus causes hot removal of the dock. The crash occurs when pciehp is unbound from one of the dock's Downstream Ports: pciehp creates a pci_slot on bind and destroys it on unbind. The pci_slot contains a pointer to the pci_bus below the Downstream Port, but a reference on that pci_bus is never acquired. The pci_bus is destroyed before the pci_slot, so a use-after-free ensues when pci_slot_release() accesses slot->bus. In principle this should not happen because pci_stop_bus_device() unbinds pciehp (and therefore destroys the pci_slot) before the pci_bus is destroyed by pci_remove_bus_device(). However the stacktrace provided by Dennis shows that pciehp is unbound from pci_remove_bus_device() instead of pci_stop_bus_device(). To understand the significance of this, one needs to know that the PCI core uses a two step process to remove a portion of the hierarchy: It first unbinds all drivers in the sub-hierarchy in pci_stop_bus_device() and then actually removes the devices in pci_remove_bus_device(). There is no precaution to prevent driver binding in-between pci_stop_bus_device() and pci_remove_bus_device(). In Dennis' case, it seems removal of the hierarchy by pciehp races with driver binding by pci_bus_add_devices(). pciehp is bound to the Downstream Port after pci_stop_bus_device() has run, so it is unbound by pci_remove_bus_device() instead of pci_stop_bus_device(). Because the pci_bus has already been destroyed at that point, accesses to it result in a use-after-free. One might conclude that driver binding needs to be prevented after pci_stop_bus_device() has run. However it seems risky that pci_slot points to pci_bus without holding a reference. Solely relying on correct ordering of driver unbind versus pci_bus destruction is certainly not defensive programming. If pci_slot has a need to access data in pci_bus, it ought to acquire a reference. Amend pci_create_slot() accordingly. Dennis reports that the crash is not reproducible with this change. Abridged stacktrace: pcieport 0000:00:07.0: PME: Signaling with IRQ 156 pcieport 0000:00:07.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ pci_bus 0000:20: dev 00, created physical slot 12 pcieport 0000:00:07.0: pciehp: Slot(12): Card not present ... pcieport 0000:21:02.0: pciehp: pcie_disable_notification: SLOTCTRL d8 write cmd 0 Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI CPU: 13 UID: 0 PID: 134 Comm: irq/156-pciehp Not tainted 6.11.0-devel+ #1 RIP: 0010:dev_driver_string+0x12/0x40 pci_destroy_slot pciehp_remove pcie_port_remove_service device_release_driver_internal bus_remove_device device_del device_unregister remove_iter device_for_each_child pcie_portdrv_remove pci_device_remove device_release_driver_internal bus_remove_device device_del pci_remove_bus_device (recursive invocation) pci_remove_bus_device pciehp_unconfigure_device pciehp_disable_slot pciehp_handle_presence_or_link_change pciehp_ist | |||||
| CVE-2024-53193 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider Some heap space is allocated for the flexible structure `struct clk_hw_onecell_data` and its flexible-array member `hws` through the composite structure `struct loongson2_clk_provider` in function `loongson2_clk_probe()`, as shown below: 289 struct loongson2_clk_provider *clp; ... 296 for (p = data; p->name; p++) 297 clks_num++; 298 299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num), 300 GFP_KERNEL); Then some data is written into the flexible array: 350 clp->clk_data.hws[p->id] = hw; This corrupts `clk_lock`, which is the spinlock variable immediately following the `clk_data` member in `struct loongson2_clk_provider`: struct loongson2_clk_provider { void __iomem *base; struct device *dev; struct clk_hw_onecell_data clk_data; spinlock_t clk_lock; /* protect access to DIV registers */ }; The problem is that the flexible structure is currently placed in the middle of `struct loongson2_clk_provider` instead of at the end. Fix this by moving `struct clk_hw_onecell_data clk_data;` to the end of `struct loongson2_clk_provider`. Also, add a code comment to help prevent this from happening again in case new members are added to the structure in the future. This change also fixes the following -Wflex-array-member-not-at-end warning: drivers/clk/clk-loongson2.c:32:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] | |||||
| CVE-2024-53191 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath12k_pci), and we get: WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80 Call Trace: free_large_kmalloc ath12k_dp_free ath12k_core_deinit ath12k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. | |||||
| CVE-2024-53190 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: Drastically reduce the attempts to read efuse in case of failures Syzkaller reported a hung task with uevent_show() on stack trace. That specific issue was addressed by another commit [0], but even with that fix applied (for example, running v6.12-rc5) we face another type of hung task that comes from the same reproducer [1]. By investigating that, we could narrow it to the following path: (a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and dummy_hcd infrastructure. (b) During the probe of rtl8192cu, the driver ends-up performing an efuse read procedure (which is related to EEPROM load IIUC), and here lies the issue: the function read_efuse() calls read_efuse_byte() many times, as loop iterations depending on the efuse size (in our example, 512 in total). This procedure for reading efuse bytes relies in a loop that performs an I/O read up to *10k* times in case of failures. We measured the time of the loop inside read_efuse_byte() alone, and in this reproducer (which involves the dummy_hcd emulation layer), it takes 15 seconds each. As a consequence, we have the driver stuck in its probe routine for big time, exposing a stack trace like below if we attempt to reboot the system, for example: task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000 Workqueue: usb_hub_wq hub_event Call Trace: __schedule+0xe22/0xeb6 schedule_timeout+0xe7/0x132 __wait_for_common+0xb5/0x12e usb_start_wait_urb+0xc5/0x1ef ? usb_alloc_urb+0x95/0xa4 usb_control_msg+0xff/0x184 _usbctrl_vendorreq_sync+0xa0/0x161 _usb_read_sync+0xb3/0xc5 read_efuse_byte+0x13c/0x146 read_efuse+0x351/0x5f0 efuse_read_all_map+0x42/0x52 rtl_efuse_shadow_map_update+0x60/0xef rtl_get_hwinfo+0x5d/0x1c2 rtl92cu_read_eeprom_info+0x10a/0x8d5 ? rtl92c_read_chip_version+0x14f/0x17e rtl_usb_probe+0x323/0x851 usb_probe_interface+0x278/0x34b really_probe+0x202/0x4a4 __driver_probe_device+0x166/0x1b2 driver_probe_device+0x2f/0xd8 [...] We propose hereby to drastically reduce the attempts of doing the I/O reads in case of failures, restricted to USB devices (given that they're inherently slower than PCIe ones). By retrying up to 10 times (instead of 10000), we got reponsiveness in the reproducer, while seems reasonable to believe that there's no sane USB device implementation in the field requiring this amount of retries at every I/O read in order to properly work. Based on that assumption, it'd be good to have it backported to stable but maybe not since driver implementation (the 10k number comes from day 0), perhaps up to 6.x series makes sense. [0] Commit 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race") [1] A note about that: this syzkaller report presents multiple reproducers that differs by the type of emulated USB device. For this specific case, check the entry from 2024/08/08 06:23 in the list of crashes; the C repro is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000. | |||||
| CVE-2024-53184 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: um: ubd: Do not use drvdata in release The drvdata is not available in release. Let's just use container_of() to get the ubd instance. Otherwise, removing a ubd device will result in a crash: RIP: 0033:blk_mq_free_tag_set+0x1f/0xba RSP: 00000000e2083bf0 EFLAGS: 00010246 RAX: 000000006021463a RBX: 0000000000000348 RCX: 0000000062604d00 RDX: 0000000004208060 RSI: 00000000605241a0 RDI: 0000000000000348 RBP: 00000000e2083c10 R08: 0000000062414010 R09: 00000000601603f7 R10: 000000000000133a R11: 000000006038c4bd R12: 0000000000000000 R13: 0000000060213a5c R14: 0000000062405d20 R15: 00000000604f7aa0 Kernel panic - not syncing: Segfault with no mm CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 6.8.0-rc3-00107-gba3f67c11638 #1 Workqueue: events mc_work_proc Stack: 00000000 604f7ef0 62c5d000 62405d20 e2083c30 6002c776 6002c755 600e47ff e2083c60 6025ffe3 04208060 603d36e0 Call Trace: [<6002c776>] ubd_device_release+0x21/0x55 [<6002c755>] ? ubd_device_release+0x0/0x55 [<600e47ff>] ? kfree+0x0/0x100 [<6025ffe3>] device_release+0x70/0xba [<60381d6a>] kobject_put+0xb5/0xe2 [<6026027b>] put_device+0x19/0x1c [<6026a036>] platform_device_put+0x26/0x29 [<6026ac5a>] platform_device_unregister+0x2c/0x2e [<6002c52e>] ubd_remove+0xb8/0xd6 [<6002bb74>] ? mconsole_reply+0x0/0x50 [<6002b926>] mconsole_remove+0x160/0x1cc [<6002bbbc>] ? mconsole_reply+0x48/0x50 [<6003379c>] ? um_set_signals+0x3b/0x43 [<60061c55>] ? update_min_vruntime+0x14/0x70 [<6006251f>] ? dequeue_task_fair+0x164/0x235 [<600620aa>] ? update_cfs_group+0x0/0x40 [<603a0e77>] ? __schedule+0x0/0x3ed [<60033761>] ? um_set_signals+0x0/0x43 [<6002af6a>] mc_work_proc+0x77/0x91 [<600520b4>] process_scheduled_works+0x1af/0x2c3 [<6004ede3>] ? assign_work+0x0/0x58 [<600527a1>] worker_thread+0x2f7/0x37a [<6004ee3b>] ? set_pf_worker+0x0/0x64 [<6005765d>] ? arch_local_irq_save+0x0/0x2d [<60058e07>] ? kthread_exit+0x0/0x3a [<600524aa>] ? worker_thread+0x0/0x37a [<60058f9f>] kthread+0x130/0x135 [<6002068e>] new_thread_handler+0x85/0xb6 | |||||
| CVE-2024-53183 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: um: net: Do not use drvdata in release The drvdata is not available in release. Let's just use container_of() to get the uml_net instance. Otherwise, removing a network device will result in a crash: RIP: 0033:net_device_release+0x10/0x6f RSP: 00000000e20c7c40 EFLAGS: 00010206 RAX: 000000006002e4e7 RBX: 00000000600f1baf RCX: 00000000624074e0 RDX: 0000000062778000 RSI: 0000000060551c80 RDI: 00000000627af028 RBP: 00000000e20c7c50 R08: 00000000603ad594 R09: 00000000e20c7b70 R10: 000000000000135a R11: 00000000603ad422 R12: 0000000000000000 R13: 0000000062c7af00 R14: 0000000062406d60 R15: 00000000627700b6 Kernel panic - not syncing: Segfault with no mm CPU: 0 UID: 0 PID: 29 Comm: kworker/0:2 Not tainted 6.12.0-rc6-g59b723cd2adb #1 Workqueue: events mc_work_proc Stack: 627af028 62c7af00 e20c7c80 60276fcd 62778000 603f5820 627af028 00000000 e20c7cb0 603a2bcd 627af000 62770010 Call Trace: [<60276fcd>] device_release+0x70/0xba [<603a2bcd>] kobject_put+0xba/0xe7 [<60277265>] put_device+0x19/0x1c [<60281266>] platform_device_put+0x26/0x29 [<60281e5f>] platform_device_unregister+0x2c/0x2e [<6002ec9c>] net_remove+0x63/0x69 [<60031316>] ? mconsole_reply+0x0/0x50 [<600310c8>] mconsole_remove+0x160/0x1cc [<60087d40>] ? __remove_hrtimer+0x38/0x74 [<60087ff8>] ? hrtimer_try_to_cancel+0x8c/0x98 [<6006b3cf>] ? dl_server_stop+0x3f/0x48 [<6006b390>] ? dl_server_stop+0x0/0x48 [<600672e8>] ? dequeue_entities+0x327/0x390 [<60038fa6>] ? um_set_signals+0x0/0x43 [<6003070c>] mc_work_proc+0x77/0x91 [<60057664>] process_scheduled_works+0x1b3/0x2dd [<60055f32>] ? assign_work+0x0/0x58 [<60057f0a>] worker_thread+0x1e9/0x293 [<6005406f>] ? set_pf_worker+0x0/0x64 [<6005d65d>] ? arch_local_irq_save+0x0/0x2d [<6005d748>] ? kthread_exit+0x0/0x3a [<60057d21>] ? worker_thread+0x0/0x293 [<6005dbf1>] kthread+0x126/0x12b [<600219c5>] new_thread_handler+0x85/0xb6 | |||||
| CVE-2024-53182 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()" This reverts commit bc3b1e9e7c50e1de0f573eea3871db61dd4787de. The bic is associated with sync_bfqq, and bfq_release_process_ref cannot be put into bfq_put_cooperator. kasan report: [ 400.347277] ================================================================== [ 400.347287] BUG: KASAN: slab-use-after-free in bic_set_bfqq+0x200/0x230 [ 400.347420] Read of size 8 at addr ffff88881cab7d60 by task dockerd/5800 [ 400.347430] [ 400.347436] CPU: 24 UID: 0 PID: 5800 Comm: dockerd Kdump: loaded Tainted: G E 6.12.0 #32 [ 400.347450] Tainted: [E]=UNSIGNED_MODULE [ 400.347454] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 400.347460] Call Trace: [ 400.347464] <TASK> [ 400.347468] dump_stack_lvl+0x5d/0x80 [ 400.347490] print_report+0x174/0x505 [ 400.347521] kasan_report+0xe0/0x160 [ 400.347541] bic_set_bfqq+0x200/0x230 [ 400.347549] bfq_bic_update_cgroup+0x419/0x740 [ 400.347560] bfq_bio_merge+0x133/0x320 [ 400.347584] blk_mq_submit_bio+0x1761/0x1e20 [ 400.347625] __submit_bio+0x28b/0x7b0 [ 400.347664] submit_bio_noacct_nocheck+0x6b2/0xd30 [ 400.347690] iomap_readahead+0x50c/0x680 [ 400.347731] read_pages+0x17f/0x9c0 [ 400.347785] page_cache_ra_unbounded+0x366/0x4a0 [ 400.347795] filemap_fault+0x83d/0x2340 [ 400.347819] __xfs_filemap_fault+0x11a/0x7d0 [xfs] [ 400.349256] __do_fault+0xf1/0x610 [ 400.349270] do_fault+0x977/0x11a0 [ 400.349281] __handle_mm_fault+0x5d1/0x850 [ 400.349314] handle_mm_fault+0x1f8/0x560 [ 400.349324] do_user_addr_fault+0x324/0x970 [ 400.349337] exc_page_fault+0x76/0xf0 [ 400.349350] asm_exc_page_fault+0x26/0x30 [ 400.349360] RIP: 0033:0x55a480d77375 [ 400.349384] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 3b 66 10 0f 86 ae 02 00 00 55 48 89 e5 48 83 ec 58 48 8b 10 <83> 7a 10 00 0f 84 27 02 00 00 44 0f b6 42 28 44 0f b6 4a 29 41 80 [ 400.349392] RSP: 002b:00007f18c37fd8b8 EFLAGS: 00010216 [ 400.349401] RAX: 00007f18c37fd9d0 RBX: 0000000000000000 RCX: 0000000000000000 [ 400.349407] RDX: 000055a484407d38 RSI: 000000c000e8b0c0 RDI: 0000000000000000 [ 400.349412] RBP: 00007f18c37fd910 R08: 000055a484017f60 R09: 000055a484066f80 [ 400.349417] R10: 0000000000194000 R11: 0000000000000005 R12: 0000000000000008 [ 400.349422] R13: 0000000000000000 R14: 000000c000476a80 R15: 0000000000000000 [ 400.349430] </TASK> [ 400.349452] [ 400.349454] Allocated by task 5800: [ 400.349459] kasan_save_stack+0x30/0x50 [ 400.349469] kasan_save_track+0x14/0x30 [ 400.349475] __kasan_slab_alloc+0x89/0x90 [ 400.349482] kmem_cache_alloc_node_noprof+0xdc/0x2a0 [ 400.349492] bfq_get_queue+0x1ef/0x1100 [ 400.349502] __bfq_get_bfqq_handle_split+0x11a/0x510 [ 400.349511] bfq_insert_requests+0xf55/0x9030 [ 400.349519] blk_mq_flush_plug_list+0x446/0x14c0 [ 400.349527] __blk_flush_plug+0x27c/0x4e0 [ 400.349534] blk_finish_plug+0x52/0xa0 [ 400.349540] _xfs_buf_ioapply+0x739/0xc30 [xfs] [ 400.350246] __xfs_buf_submit+0x1b2/0x640 [xfs] [ 400.350967] xfs_buf_read_map+0x306/0xa20 [xfs] [ 400.351672] xfs_trans_read_buf_map+0x285/0x7d0 [xfs] [ 400.352386] xfs_imap_to_bp+0x107/0x270 [xfs] [ 400.353077] xfs_iget+0x70d/0x1eb0 [xfs] [ 400.353786] xfs_lookup+0x2ca/0x3a0 [xfs] [ 400.354506] xfs_vn_lookup+0x14e/0x1a0 [xfs] [ 400.355197] __lookup_slow+0x19c/0x340 [ 400.355204] lookup_one_unlocked+0xfc/0x120 [ 400.355211] ovl_lookup_single+0x1b3/0xcf0 [overlay] [ 400.355255] ovl_lookup_layer+0x316/0x490 [overlay] [ 400.355295] ovl_lookup+0x844/0x1fd0 [overlay] [ 400.355351] lookup_one_qstr_excl+0xef/0x150 [ 400.355357] do_unlinkat+0x22a/0x620 [ 400.355366] __x64_sys_unlinkat+0x109/0x1e0 [ 400.355375] do_syscall_64+0x82/0x160 [ 400.355384] entry_SYSCALL_64_after_hwframe+0x76/0x7 ---truncated--- | |||||
| CVE-2024-53181 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: um: vector: Do not use drvdata in release The drvdata is not available in release. Let's just use container_of() to get the vector_device instance. Otherwise, removing a vector device will result in a crash: RIP: 0033:vector_device_release+0xf/0x50 RSP: 00000000e187bc40 EFLAGS: 00010202 RAX: 0000000060028f61 RBX: 00000000600f1baf RCX: 00000000620074e0 RDX: 000000006220b9c0 RSI: 0000000060551c80 RDI: 0000000000000000 RBP: 00000000e187bc50 R08: 00000000603ad594 R09: 00000000e187bb70 R10: 000000000000135a R11: 00000000603ad422 R12: 00000000623ae028 R13: 000000006287a200 R14: 0000000062006d30 R15: 00000000623700b6 Kernel panic - not syncing: Segfault with no mm CPU: 0 UID: 0 PID: 16 Comm: kworker/0:1 Not tainted 6.12.0-rc6-g59b723cd2adb #1 Workqueue: events mc_work_proc Stack: 60028f61 623ae028 e187bc80 60276fcd 6220b9c0 603f5820 623ae028 00000000 e187bcb0 603a2bcd 623ae000 62370010 Call Trace: [<60028f61>] ? vector_device_release+0x0/0x50 [<60276fcd>] device_release+0x70/0xba [<603a2bcd>] kobject_put+0xba/0xe7 [<60277265>] put_device+0x19/0x1c [<60281266>] platform_device_put+0x26/0x29 [<60281e5f>] platform_device_unregister+0x2c/0x2e [<60029422>] vector_remove+0x52/0x58 [<60031316>] ? mconsole_reply+0x0/0x50 [<600310c8>] mconsole_remove+0x160/0x1cc [<603b19f4>] ? strlen+0x0/0x15 [<60066611>] ? __dequeue_entity+0x1a9/0x206 [<600666a7>] ? set_next_entity+0x39/0x63 [<6006666e>] ? set_next_entity+0x0/0x63 [<60038fa6>] ? um_set_signals+0x0/0x43 [<6003070c>] mc_work_proc+0x77/0x91 [<60057664>] process_scheduled_works+0x1b3/0x2dd [<60055f32>] ? assign_work+0x0/0x58 [<60057f0a>] worker_thread+0x1e9/0x293 [<6005406f>] ? set_pf_worker+0x0/0x64 [<6005d65d>] ? arch_local_irq_save+0x0/0x2d [<6005d748>] ? kthread_exit+0x0/0x3a [<60057d21>] ? worker_thread+0x0/0x293 [<6005dbf1>] kthread+0x126/0x12b [<600219c5>] new_thread_handler+0x85/0xb6 | |||||
| CVE-2024-53180 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Add sanity NULL check for the default mmap fault handler A driver might allow the mmap access before initializing its runtime->dma_area properly. Add a proper NULL check before passing to virt_to_page() for avoiding a panic. | |||||
| CVE-2024-53175 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipc: fix memleak if msg_init_ns failed in create_ipc_ns Percpu memory allocation may failed during create_ipc_ns however this fail is not handled properly since ipc sysctls and mq sysctls is not released properly. Fix this by release these two resource when failure. Here is the kmemleak stack when percpu failed: unreferenced object 0xffff88819de2a600 (size 512): comm "shmem_2nstest", pid 120711, jiffies 4300542254 hex dump (first 32 bytes): 60 aa 9d 84 ff ff ff ff fc 18 48 b2 84 88 ff ff `.........H..... 04 00 00 00 a4 01 00 00 20 e4 56 81 ff ff ff ff ........ .V..... backtrace (crc be7cba35): [<ffffffff81b43f83>] __kmalloc_node_track_caller_noprof+0x333/0x420 [<ffffffff81a52e56>] kmemdup_noprof+0x26/0x50 [<ffffffff821b2f37>] setup_mq_sysctls+0x57/0x1d0 [<ffffffff821b29cc>] copy_ipcs+0x29c/0x3b0 [<ffffffff815d6a10>] create_new_namespaces+0x1d0/0x920 [<ffffffff815d7449>] copy_namespaces+0x2e9/0x3e0 [<ffffffff815458f3>] copy_process+0x29f3/0x7ff0 [<ffffffff8154b080>] kernel_clone+0xc0/0x650 [<ffffffff8154b6b1>] __do_sys_clone+0xa1/0xe0 [<ffffffff843df8ff>] do_syscall_64+0xbf/0x1c0 [<ffffffff846000b0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 | |||||
| CVE-2024-53174 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: make sure cache entry active before cache_show The function `c_show` was called with protection from RCU. This only ensures that `cp` will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2024-53173 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.0: Fix a use-after-free problem in the asynchronous open() Yang Erkun reports that when two threads are opening files at the same time, and are forced to abort before a reply is seen, then the call to nfs_release_seqid() in nfs4_opendata_free() can result in a use-after-free of the pointer to the defunct rpc task of the other thread. The fix is to ensure that if the RPC call is aborted before the call to nfs_wait_on_sequence() is complete, then we must call nfs_release_seqid() in nfs4_open_release() before the rpc_task is freed. | |||||
| CVE-2024-53171 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commit After an insertion in TNC, the tree might split and cause a node to change its `znode->parent`. A further deletion of other nodes in the tree (which also could free the nodes), the aforementioned node's `znode->cparent` could still point to a freed node. This `znode->cparent` may not be updated when getting nodes to commit in `ubifs_tnc_start_commit()`. This could then trigger a use-after-free when accessing the `znode->cparent` in `write_index()` in `ubifs_tnc_end_commit()`. This can be triggered by running rm -f /etc/test-file.bin dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then reports: BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950 Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153 Call trace: dump_backtrace+0x0/0x340 show_stack+0x18/0x24 dump_stack_lvl+0x9c/0xbc print_address_description.constprop.0+0x74/0x2b0 kasan_report+0x1d8/0x1f0 kasan_check_range+0xf8/0x1a0 memcpy+0x84/0xf4 ubifs_tnc_end_commit+0xa5c/0x1950 do_commit+0x4e0/0x1340 ubifs_bg_thread+0x234/0x2e0 kthread+0x36c/0x410 ret_from_fork+0x10/0x20 Allocated by task 401: kasan_save_stack+0x38/0x70 __kasan_kmalloc+0x8c/0xd0 __kmalloc+0x34c/0x5bc tnc_insert+0x140/0x16a4 ubifs_tnc_add+0x370/0x52c ubifs_jnl_write_data+0x5d8/0x870 do_writepage+0x36c/0x510 ubifs_writepage+0x190/0x4dc __writepage+0x58/0x154 write_cache_pages+0x394/0x830 do_writepages+0x1f0/0x5b0 filemap_fdatawrite_wbc+0x170/0x25c file_write_and_wait_range+0x140/0x190 ubifs_fsync+0xe8/0x290 vfs_fsync_range+0xc0/0x1e4 do_fsync+0x40/0x90 __arm64_sys_fsync+0x34/0x50 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 Freed by task 403: kasan_save_stack+0x38/0x70 kasan_set_track+0x28/0x40 kasan_set_free_info+0x28/0x4c __kasan_slab_free+0xd4/0x13c kfree+0xc4/0x3a0 tnc_delete+0x3f4/0xe40 ubifs_tnc_remove_range+0x368/0x73c ubifs_tnc_remove_ino+0x29c/0x2e0 ubifs_jnl_delete_inode+0x150/0x260 ubifs_evict_inode+0x1d4/0x2e4 evict+0x1c8/0x450 iput+0x2a0/0x3c4 do_unlinkat+0x2cc/0x490 __arm64_sys_unlinkat+0x90/0x100 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free when a node becomes root in TNC but still has a `cparent` to an already freed node. More specifically, consider the following TNC: zroot / / zp1 / / zn Inserting a new node `zn_new` with a key smaller then `zn` will trigger a split in `tnc_insert()` if `zp1` is full: zroot / \ / \ zp1 zp2 / \ / \ zn_new zn `zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still points to `zp1`. Now, consider a removal of all the nodes _except_ `zn`. Just when `tnc_delete()` is about to delete `zroot` and `zp2`: zroot \ \ zp2 \ \ zn `zroot` and `zp2` get freed and the tree collapses: zn `zn` now becomes the new `zroot`. `get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and `write_index()` will check its `znode->cparent` that wrongly points to the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called with `znode->cparent->zbranch[znode->iip].hash` that triggers the use-after-free! Fix this by explicitly setting `znode->cparent` to `NULL` in `get_znodes_to_commit()` for the root node. The search for the dirty nodes ---truncated--- | |||||
| CVE-2024-53163 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat/qat_420xx - fix off by one in uof_get_name() This is called from uof_get_name_420xx() where "num_objs" is the ARRAY_SIZE() of fw_objs[]. The > needs to be >= to prevent an out of bounds access. | |||||
| CVE-2024-53162 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat/qat_4xxx - fix off by one in uof_get_name() The fw_objs[] array has "num_objs" elements so the > needs to be >= to prevent an out of bounds read. | |||||
| CVE-2024-53161 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/bluefield: Fix potential integer overflow The 64-bit argument for the "get DIMM info" SMC call consists of mem_ctrl_idx left-shifted 16 bits and OR-ed with DIMM index. With mem_ctrl_idx defined as 32-bits wide the left-shift operation truncates the upper 16 bits of information during the calculation of the SMC argument. The mem_ctrl_idx stack variable must be defined as 64-bits wide to prevent any potential integer overflow, i.e. loss of data from upper 16 bits. | |||||
