Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-56740 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nfs/localio: must clear res.replen in nfs_local_read_done Otherwise memory corruption can occur due to NFSv3 LOCALIO reads leaving garbage in res.replen: - nfs3_read_done() copies that into server->read_hdrsize; from there nfs3_proc_read_setup() copies it to args.replen in new requests. - nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages() which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf contains a ridiculous len. - This is copied to rq_private_buf and xs_read_stream_request() eventually passes the kvec to sock_recvmsg() which receives incoming data into entirely the wrong place. This is easily reproduced with NFSv3 LOCALIO that is servicing reads when it is made to pivot back to using normal RPC. This switch back to using normal NFSv3 with RPC can occur for a few reasons but this issue was exposed with a test that stops and then restarts the NFSv3 server while LOCALIO is performing heavy read IO. | |||||
| CVE-2024-56739 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rtc: check if __rtc_read_time was successful in rtc_timer_do_work() If the __rtc_read_time call fails,, the struct rtc_time tm; may contain uninitialized data, or an illegal date/time read from the RTC hardware. When calling rtc_tm_to_ktime later, the result may be a very large value (possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue, they will continually expire, may causing kernel softlockup. | |||||
| CVE-2024-56730 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: fix handling of the failed kzalloc() memory allocation On the linux-next, next-20241108 vanilla kernel, the coccinelle tool gave the following error report: ./net/9p/trans_usbg.c:912:5-11: ERROR: allocation function on line 911 returns NULL not ERR_PTR on failure kzalloc() failure is fixed to handle the NULL return case on the memory exhaustion. | |||||
| CVE-2024-56728 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_ethtool.c Add error pointer check after calling otx2_mbox_get_rsp(). | |||||
| CVE-2024-56727 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c Adding error pointer check after calling otx2_mbox_get_rsp(). | |||||
| CVE-2024-56726 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in cn10k.c Add error pointer check after calling otx2_mbox_get_rsp(). | |||||
| CVE-2024-56725 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_dcbnl.c Add error pointer check after calling otx2_mbox_get_rsp(). | |||||
| CVE-2024-56724 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. | |||||
| CVE-2024-56723 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ). Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them. | |||||
| CVE-2024-56722 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix cpu stuck caused by printings during reset During reset, cmd to destroy resources such as qp, cq, and mr may fail, and error logs will be printed. When a large number of resources are destroyed, there will be lots of printings, and it may lead to a cpu stuck. Delete some unnecessary printings and replace other printing functions in these paths with the ratelimited version. | |||||
| CVE-2024-56721 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Terminate the erratum_1386_microcode array The erratum_1386_microcode array requires an empty entry at the end. Otherwise x86_match_cpu_with_stepping() will continue iterate the array after it ended. Add an empty entry to erratum_1386_microcode to its end. | |||||
| CVE-2024-56716 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: prevent bad user input in nsim_dev_health_break_write() If either a zero count or a large one is provided, kernel can crash. | |||||
| CVE-2024-56713 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: netdevsim: fix nsim_pp_hold_write() nsim_pp_hold_write() has two problems: 1) It may return with rtnl held, as found by syzbot. 2) Its return value does not propagate an error if any. | |||||
| CVE-2024-56711 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereference drm_mode_duplicate() could return NULL due to lack of memory, which will then call NULL pointer dereference. Add a check to prevent it. | |||||
| CVE-2024-56710 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_direct_read_write() The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked and pages remain pinned if ceph_alloc_sparse_ext_map() fails. There is no need to delay the allocation of sparse_ext map until after the bvecs array is set up, so fix this by moving sparse_ext allocation a bit earlier. Also, make a similar adjustment in __ceph_sync_read() for consistency (a leak of the same kind in __ceph_sync_read() has been addressed differently). | |||||
| CVE-2024-56708 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Avoid segmentation fault on module unload The segmentation fault happens because: During modprobe: 1. In igen6_probe(), igen6_pvt will be allocated with kzalloc() 2. In igen6_register_mci(), mci->pvt_info will point to &igen6_pvt->imc[mc] During rmmod: 1. In mci_release() in edac_mc.c, it will kfree(mci->pvt_info) 2. In igen6_remove(), it will kfree(igen6_pvt); Fix this issue by setting mci->pvt_info to NULL to avoid the double kfree. | |||||
| CVE-2024-56705 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: atomisp: Add check for rgby_data memory allocation failure In ia_css_3a_statistics_allocate(), there is no check on the allocation result of the rgby_data memory. If rgby_data is not successfully allocated, it may trigger the assert(host_stats->rgby_data) assertion in ia_css_s3a_hmem_decode(). Adding a check to fix this potential issue. | |||||
| CVE-2024-56700 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: wl128x: Fix atomicity violation in fmc_send_cmd() Atomicity violation occurs when the fmc_send_cmd() function is executed simultaneously with the modification of the fmdev->resp_skb value. Consider a scenario where, after passing the validity check within the function, a non-null fmdev->resp_skb variable is assigned a null value. This results in an invalid fmdev->resp_skb variable passing the validity check. As seen in the later part of the function, skb = fmdev->resp_skb; when the invalid fmdev->resp_skb passes the check, a null pointer dereference error may occur at line 478, evt_hdr = (void *)skb->data; To address this issue, it is recommended to include the validity check of fmdev->resp_skb within the locked section of the function. This modification ensures that the value of fmdev->resp_skb does not change during the validation process, thereby maintaining its validity. This possible bug is found by an experimental static analysis tool developed by our team. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. | |||||
| CVE-2024-56699 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix potential double remove of hotplug slot In commit 6ee600bfbe0f ("s390/pci: remove hotplug slot when releasing the device") the zpci_exit_slot() was moved from zpci_device_reserved() to zpci_release_device() with the intention of keeping the hotplug slot around until the device is actually removed. Now zpci_release_device() is only called once all references are dropped. Since the zPCI subsystem only drops its reference once the device is in the reserved state it follows that zpci_release_device() must only deal with devices in the reserved state. Despite that it contains code to tear down from both configured and standby state. For the standby case this already includes the removal of the hotplug slot so would cause a double removal if a device was ever removed in either configured or standby state. Instead of causing a potential double removal in a case that should never happen explicitly WARN_ON() if a device in non-reserved state is released and get rid of the dead code cases. | |||||
| CVE-2024-56698 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix looping of queued SG entries The dwc3_request->num_queued_sgs is decremented on completion. If a partially completed request is handled, then the dwc3_request->num_queued_sgs no longer reflects the total number of num_queued_sgs (it would be cleared). Correctly check the number of request SG entries remained to be prepare and queued. Failure to do this may cause null pointer dereference when accessing non-existent SG entry. | |||||
