Vulnerabilities (CVE)

Filtered by vendor Linux Subscribe
Total 19806 CVE
CVE Vendors Products Updated CVSS v2 CVSS v3
CVE-2025-21847 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference.
CVE-2025-21845 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: sst: Fix SST write failure 'commit 18bcb4aa54ea ("mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`")' introduced a bug where only one byte of data is written, regardless of the number of bytes passed to sst_nor_write_data(), causing a kernel crash during the write operation. Ensure the correct number of bytes are written as passed to sst_nor_write_data(). Call trace: [ 57.400180] ------------[ cut here ]------------ [ 57.404842] While writing 2 byte written 1 bytes [ 57.409493] WARNING: CPU: 0 PID: 737 at drivers/mtd/spi-nor/sst.c:187 sst_nor_write_data+0x6c/0x74 [ 57.418464] Modules linked in: [ 57.421517] CPU: 0 UID: 0 PID: 737 Comm: mtd_debug Not tainted 6.12.0-g5ad04afd91f9 #30 [ 57.429517] Hardware name: Xilinx Versal A2197 Processor board revA - x-prc-02 revA (DT) [ 57.437600] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 57.444557] pc : sst_nor_write_data+0x6c/0x74 [ 57.448911] lr : sst_nor_write_data+0x6c/0x74 [ 57.453264] sp : ffff80008232bb40 [ 57.456570] x29: ffff80008232bb40 x28: 0000000000010000 x27: 0000000000000001 [ 57.463708] x26: 000000000000ffff x25: 0000000000000000 x24: 0000000000000000 [ 57.470843] x23: 0000000000010000 x22: ffff80008232bbf0 x21: ffff000816230000 [ 57.477978] x20: ffff0008056c0080 x19: 0000000000000002 x18: 0000000000000006 [ 57.485112] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80008232b580 [ 57.492246] x14: 0000000000000000 x13: ffff8000816d1530 x12: 00000000000004a4 [ 57.499380] x11: 000000000000018c x10: ffff8000816fd530 x9 : ffff8000816d1530 [ 57.506515] x8 : 00000000fffff7ff x7 : ffff8000816fd530 x6 : 0000000000000001 [ 57.513649] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 57.520782] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008049b0000 [ 57.527916] Call trace: [ 57.530354] sst_nor_write_data+0x6c/0x74 [ 57.534361] sst_nor_write+0xb4/0x18c [ 57.538019] mtd_write_oob_std+0x7c/0x88 [ 57.541941] mtd_write_oob+0x70/0xbc [ 57.545511] mtd_write+0x68/0xa8 [ 57.548733] mtdchar_write+0x10c/0x290 [ 57.552477] vfs_write+0xb4/0x3a8 [ 57.555791] ksys_write+0x74/0x10c [ 57.559189] __arm64_sys_write+0x1c/0x28 [ 57.563109] invoke_syscall+0x54/0x11c [ 57.566856] el0_svc_common.constprop.0+0xc0/0xe0 [ 57.571557] do_el0_svc+0x1c/0x28 [ 57.574868] el0_svc+0x30/0xcc [ 57.577921] el0t_64_sync_handler+0x120/0x12c [ 57.582276] el0t_64_sync+0x190/0x194 [ 57.585933] ---[ end trace 0000000000000000 ]--- [pratyush@kernel.org: add Cc stable tag]
CVE-2025-21843 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: avoid garbage value in panthor_ioctl_dev_query() 'priorities_info' is uninitialized, and the uninitialized value is copied to user object when calling PANTHOR_UOBJ_SET(). Using memset to initialize 'priorities_info' to avoid this garbage value problem.
CVE-2025-21841 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: cpufreq/amd-pstate: Fix cpufreq_policy ref counting amd_pstate_update_limits() takes a cpufreq_policy reference but doesn't decrement the refcount in one of the exit paths, fix that.
CVE-2025-21840 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header The intel-lpmd tool [1], which uses the THERMAL_GENL_ATTR_CPU_CAPABILITY attribute to receive HFI events from kernel space, encounters a segmentation fault after commit 1773572863c4 ("thermal: netlink: Add the commands and the events for the thresholds"). The issue arises because the THERMAL_GENL_ATTR_CPU_CAPABILITY raw value was changed while intel_lpmd still uses the old value. Although intel_lpmd can be updated to check the THERMAL_GENL_VERSION and use the appropriate THERMAL_GENL_ATTR_CPU_CAPABILITY value, the commit itself is questionable. The commit introduced a new element in the middle of enum thermal_genl_attr, which affects many existing attributes and introduces potential risks and unnecessary maintenance burdens for userspace thermal netlink event users. Solve the issue by moving the newly introduced THERMAL_GENL_ATTR_TZ_PREV_TEMP attribute to the end of the enum thermal_genl_attr. This ensures that all existing thermal generic netlink attributes remain unaffected. [ rjw: Subject edits ]
CVE-2025-21834 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: seccomp: passthrough uretprobe systemcall without filtering When attaching uretprobes to processes running inside docker, the attached process is segfaulted when encountering the retprobe. The reason is that now that uretprobe is a system call the default seccomp filters in docker block it as they only allow a specific set of known syscalls. This is true for other userspace applications which use seccomp to control their syscall surface. Since uretprobe is a "kernel implementation detail" system call which is not used by userspace application code directly, it is impractical and there's very little point in forcing all userspace applications to explicitly allow it in order to avoid crashing tracked processes. Pass this systemcall through seccomp without depending on configuration. Note: uretprobe is currently only x86_64 and isn't expected to ever be supported in i386. [kees: minimized changes for easier backporting, tweaked commit log]
CVE-2025-21833 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE There is a WARN_ON_ONCE to catch an unlikely situation when domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless happens we must avoid using a NULL pointer.
CVE-2025-21824 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix a use of uninitialized mutex commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra") caused a use of uninitialized mutex leading to below warning when CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled. [ 41.662843] ------------[ cut here ]------------ [ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878 [ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod [ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1 [ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024 [ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 41.679636] pc : __mutex_lock+0x670/0x878 [ 41.683834] lr : __mutex_lock+0x670/0x878 [ 41.688035] sp : ffff800084b77090 [ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000 [ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000 [ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0 [ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000 [ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3 [ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc [ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001 [ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000 [ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000 [ 41.764251] Call trace: [ 41.766695] __mutex_lock+0x670/0x878 [ 41.770373] mutex_lock_nested+0x2c/0x40 [ 41.774134] host1x_intr_start+0x54/0xf8 [host1x] [ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x] [ 41.783935] pm_generic_runtime_resume+0x84/0xc8 [ 41.788485] __rpm_callback+0xa0/0x478 [ 41.792422] rpm_callback+0x15c/0x1a8 [ 41.795922] rpm_resume+0x698/0xc08 [ 41.799597] __pm_runtime_resume+0xa8/0x140 [ 41.803621] host1x_probe+0x810/0xbc0 [host1x] [ 41.807909] platform_probe+0xcc/0x1a8 [ 41.811845] really_probe+0x188/0x800 [ 41.815347] __driver_probe_device+0x164/0x360 [ 41.819810] driver_probe_device+0x64/0x1a8 [ 41.823834] __driver_attach+0x180/0x490 [ 41.827773] bus_for_each_dev+0x104/0x1a0 [ 41.831797] driver_attach+0x44/0x68 [ 41.835296] bus_add_driver+0x23c/0x4e8 [ 41.839235] driver_register+0x15c/0x3a8 [ 41.843170] __platform_register_drivers+0xa4/0x208 [ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x] [ 41.853147] do_one_initcall+0xd4/0x380 [ 41.856997] do_init_module+0x1dc/0x698 [ 41.860758] load_module+0xc70/0x1300 [ 41.864435] __do_sys_init_module+0x1a8/0x1d0 [ 41.868721] __arm64_sys_init_module+0x74/0xb0 [ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8 [ 41.877997] do_el0_svc+0x154/0x1d0 [ 41.881671] el0_svc+0x54/0x140 [ 41.884820] el0t_64_sync_handler+0x120/0x130 [ 41.889285] el0t_64_sync+0x1a4/0x1a8 [ 41.892960] irq event stamp: 69737 [ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8 [ 41.905739] hardirqs last disabled at (69736): ---truncated---
CVE-2025-21822 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: ptp: vmclock: Set driver data before its usage If vmclock_ptp_register() fails during probing, vmclock_remove() is called to clean up the ptp clock and misc device. It uses dev_get_drvdata() to access the vmclock state. However the driver data is not yet set at this point. Assign the driver data earlier.
CVE-2025-21821 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: fbdev: omap: use threaded IRQ for LCD DMA When using touchscreen and framebuffer, Nokia 770 crashes easily with: BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000 Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2 Hardware name: Nokia 770 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x54/0x5c dump_stack_lvl from __schedule_bug+0x50/0x70 __schedule_bug from __schedule+0x4d4/0x5bc __schedule from schedule+0x34/0xa0 schedule from schedule_preempt_disabled+0xc/0x10 schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4 __mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4 clk_prepare_lock from clk_set_rate+0x18/0x154 clk_set_rate from sossi_read_data+0x4c/0x168 sossi_read_data from hwa742_read_reg+0x5c/0x8c hwa742_read_reg from send_frame_handler+0xfc/0x300 send_frame_handler from process_pending_requests+0x74/0xd0 process_pending_requests from lcd_dma_irq_handler+0x50/0x74 lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130 __handle_irq_event_percpu from handle_irq_event+0x28/0x68 handle_irq_event from handle_level_irq+0x9c/0x170 handle_level_irq from generic_handle_domain_irq+0x2c/0x3c generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c generic_handle_arch_irq from call_with_stack+0x1c/0x24 call_with_stack from __irq_svc+0x94/0xa8 Exception stack(0xc5255da0 to 0xc5255de8) 5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248 5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94 5de0: 60000013 ffffffff __irq_svc from clk_prepare_lock+0x4c/0xe4 clk_prepare_lock from clk_get_rate+0x10/0x74 clk_get_rate from uwire_setup_transfer+0x40/0x180 uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664 spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498 __spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8 __spi_sync from spi_sync+0x24/0x40 spi_sync from ads7846_halfd_read_state+0x5c/0x1c0 ads7846_halfd_read_state from ads7846_irq+0x58/0x348 ads7846_irq from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x120/0x228 irq_thread from kthread+0xc8/0xe8 kthread from ret_from_fork+0x14/0x28 As a quick fix, switch to a threaded IRQ which provides a stable system.
CVE-2025-21820 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: tty: xilinx_uartps: split sysrq handling lockdep detects the following circular locking dependency: CPU 0 CPU 1 ========================== ============================ cdns_uart_isr() printk() uart_port_lock(port) console_lock() cdns_uart_console_write() if (!port->sysrq) uart_port_lock(port) uart_handle_break() port->sysrq = ... uart_handle_sysrq_char() printk() console_lock() The fixed commit attempts to avoid this situation by only taking the port lock in cdns_uart_console_write if port->sysrq unset. However, if (as shown above) cdns_uart_console_write runs before port->sysrq is set, then it will try to take the port lock anyway. This may result in a deadlock. Fix this by splitting sysrq handling into two parts. We use the prepare helper under the port lock and defer handling until we release the lock.
CVE-2025-21819 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd/display: Use HW lock mgr for PSR1" This reverts commit a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1") Because it may cause system hang while connect with two edp panel.
CVE-2025-21816 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: hrtimers: Force migrate away hrtimers queued after CPUHP_AP_HRTIMERS_DYING hrtimers are migrated away from the dying CPU to any online target at the CPUHP_AP_HRTIMERS_DYING stage in order not to delay bandwidth timers handling tasks involved in the CPU hotplug forward progress. However wakeups can still be performed by the outgoing CPU after CPUHP_AP_HRTIMERS_DYING. Those can result again in bandwidth timers being armed. Depending on several considerations (crystal ball power management based election, earliest timer already enqueued, timer migration enabled or not), the target may eventually be the current CPU even if offline. If that happens, the timer is eventually ignored. The most notable example is RCU which had to deal with each and every of those wake-ups by deferring them to an online CPU, along with related workarounds: _ e787644caf76 (rcu: Defer RCU kthreads wakeup when CPU is dying) _ 9139f93209d1 (rcu/nocb: Fix RT throttling hrtimer armed from offline CPU) _ f7345ccc62a4 (rcu/nocb: Fix rcuog wake-up from offline softirq) The problem isn't confined to RCU though as the stop machine kthread (which runs CPUHP_AP_HRTIMERS_DYING) reports its completion at the end of its work through cpu_stop_signal_done() and performs a wake up that eventually arms the deadline server timer: WARNING: CPU: 94 PID: 588 at kernel/time/hrtimer.c:1086 hrtimer_start_range_ns+0x289/0x2d0 CPU: 94 UID: 0 PID: 588 Comm: migration/94 Not tainted Stopper: multi_cpu_stop+0x0/0x120 <- stop_machine_cpuslocked+0x66/0xc0 RIP: 0010:hrtimer_start_range_ns+0x289/0x2d0 Call Trace: <TASK> start_dl_timer enqueue_dl_entity dl_server_start enqueue_task_fair enqueue_task ttwu_do_activate try_to_wake_up complete cpu_stopper_thread Instead of providing yet another bandaid to work around the situation, fix it in the hrtimers infrastructure instead: always migrate away a timer to an online target whenever it is enqueued from an offline CPU. This will also allow to revert all the above RCU disgraceful hacks.
CVE-2025-21815 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.1 HIGH
In the Linux kernel, the following vulnerability has been resolved: mm/compaction: fix UBSAN shift-out-of-bounds warning syzkaller reported a UBSAN shift-out-of-bounds warning of (1UL << order) in isolate_freepages_block(). The bogus compound_order can be any value because it is union with flags. Add back the MAX_PAGE_ORDER check to fix the warning.
CVE-2025-21813 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix off-by-one root mis-connection Before attaching a new root to the old root, the children counter of the new root is checked to verify that only the upcoming CPU's top group have been connected to it. However since the recently added commit b729cc1ec21a ("timers/migration: Fix another race between hotplug and idle entry/exit") this check is not valid anymore because the old root is pre-accounted as a child to the new root. Therefore after connecting the upcoming CPU's top group to the new root, the children count to be expected must be 2 and not 1 anymore. This omission results in the old root to not be connected to the new root. Then eventually the system may run with more than one top level, which defeats the purpose of a single idle migrator. Also the old root is pre-accounted but not connected upon the new root creation. But it can be connected to the new root later on. Therefore the old root may be accounted twice to the new root. The propagation of such overcommit can end up creating a double final top-level root with a groupmask incorrectly initialized. Although harmless given that the final top level roots will never have a parent to walk up to, this oddity opportunistically reported the core issue: WARNING: CPU: 8 PID: 0 at kernel/time/timer_migration.c:543 tmigr_requires_handle_remote CPU: 8 UID: 0 PID: 0 Comm: swapper/8 RIP: 0010:tmigr_requires_handle_remote Call Trace: <IRQ> ? tmigr_requires_handle_remote ? hrtimer_run_queues update_process_times tick_periodic tick_handle_periodic __sysvec_apic_timer_interrupt sysvec_apic_timer_interrupt </IRQ> Fix the problem by taking the old root into account in the children count of the new root so the connection is not omitted. Also warn when more than one top level group exists to better detect similar issues in the future.
CVE-2025-21812 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: ax25: rcu protect dev->ax25_ptr syzbot found a lockdep issue [1]. We should remove ax25 RTNL dependency in ax25_setsockopt() This should also fix a variety of possible UAF in ax25. [1] WARNING: possible circular locking dependency detected 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Not tainted ------------------------------------------------------ syz.5.1818/12806 is trying to acquire lock: ffffffff8fcb3988 (rtnl_mutex){+.+.}-{4:4}, at: ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680 but task is already holding lock: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline] ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_AX25){+.+.}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x100 net/core/sock.c:3642 lock_sock include/net/sock.h:1618 [inline] ax25_kill_by_device net/ax25/af_ax25.c:101 [inline] ax25_device_event+0x24d/0x580 net/ax25/af_ax25.c:146 notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:9026 dev_ifsioc+0x7c8/0xe70 net/core/dev_ioctl.c:563 dev_ioctl+0x719/0x1340 net/core/dev_ioctl.c:820 sock_do_ioctl+0x240/0x460 net/socket.c:1234 sock_ioctl+0x626/0x8e0 net/socket.c:1339 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (rtnl_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x1ac/0xee0 kernel/locking/mutex.c:735 ax25_setsockopt+0xa55/0xe90 net/ax25/af_ax25.c:680 do_sock_setsockopt+0x3af/0x720 net/socket.c:2324 __sys_setsockopt net/socket.c:2349 [inline] __do_sys_setsockopt net/socket.c:2355 [inline] __se_sys_setsockopt net/socket.c:2352 [inline] __x64_sys_setsockopt+0x1ee/0x280 net/socket.c:2352 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_AX25); lock(rtnl_mutex); lock(sk_lock-AF_AX25); lock(rtnl_mutex); *** DEADLOCK *** 1 lock held by syz.5.1818/12806: #0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1618 [inline] #0: ffff8880617ac258 (sk_lock-AF_AX25){+.+.}-{0:0}, at: ax25_setsockopt+0x209/0xe90 net/ax25/af_ax25.c:574 stack backtrace: CPU: 1 UID: 0 PID: 12806 Comm: syz.5.1818 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/lockin ---truncated---
CVE-2025-21811 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: nilfs2: protect access to buffers with no active references nilfs_lookup_dirty_data_buffers(), which iterates through the buffers attached to dirty data folios/pages, accesses the attached buffers without locking the folios/pages. For data cache, nilfs_clear_folio_dirty() may be called asynchronously when the file system degenerates to read only, so nilfs_lookup_dirty_data_buffers() still has the potential to cause use after free issues when buffers lose the protection of their dirty state midway due to this asynchronous clearing and are unintentionally freed by try_to_free_buffers(). Eliminate this race issue by adjusting the lock section in this function.
CVE-2025-21803 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix warnings during S3 suspend The enable_gpe_wakeup() function calls acpi_enable_all_wakeup_gpes(), and the later one may call the preempt_schedule_common() function, resulting in a thread switch and causing the CPU to be in an interrupt enabled state after the enable_gpe_wakeup() function returns, leading to the warnings as follow. [ C0] WARNING: ... at kernel/time/timekeeping.c:845 ktime_get+0xbc/0xc8 [ C0] ... [ C0] Call Trace: [ C0] [<90000000002243b4>] show_stack+0x64/0x188 [ C0] [<900000000164673c>] dump_stack_lvl+0x60/0x88 [ C0] [<90000000002687e4>] __warn+0x8c/0x148 [ C0] [<90000000015e9978>] report_bug+0x1c0/0x2b0 [ C0] [<90000000016478e4>] do_bp+0x204/0x3b8 [ C0] [<90000000025b1924>] exception_handlers+0x1924/0x10000 [ C0] [<9000000000343bbc>] ktime_get+0xbc/0xc8 [ C0] [<9000000000354c08>] tick_sched_timer+0x30/0xb0 [ C0] [<90000000003408e0>] __hrtimer_run_queues+0x160/0x378 [ C0] [<9000000000341f14>] hrtimer_interrupt+0x144/0x388 [ C0] [<9000000000228348>] constant_timer_interrupt+0x38/0x48 [ C0] [<90000000002feba4>] __handle_irq_event_percpu+0x64/0x1e8 [ C0] [<90000000002fed48>] handle_irq_event_percpu+0x20/0x80 [ C0] [<9000000000306b9c>] handle_percpu_irq+0x5c/0x98 [ C0] [<90000000002fd4a0>] generic_handle_domain_irq+0x30/0x48 [ C0] [<9000000000d0c7b0>] handle_cpu_irq+0x70/0xa8 [ C0] [<9000000001646b30>] handle_loongarch_irq+0x30/0x48 [ C0] [<9000000001646bc8>] do_vint+0x80/0xe0 [ C0] [<90000000002aea1c>] finish_task_switch.isra.0+0x8c/0x2a8 [ C0] [<900000000164e34c>] __schedule+0x314/0xa48 [ C0] [<900000000164ead8>] schedule+0x58/0xf0 [ C0] [<9000000000294a2c>] worker_thread+0x224/0x498 [ C0] [<900000000029d2f0>] kthread+0xf8/0x108 [ C0] [<9000000000221f28>] ret_from_kernel_thread+0xc/0xa4 [ C0] [ C0] ---[ end trace 0000000000000000 ]--- The root cause is acpi_enable_all_wakeup_gpes() uses a mutex to protect acpi_hw_enable_all_wakeup_gpes(), and acpi_ut_acquire_mutex() may cause a thread switch. Since there is no longer concurrent execution during loongarch_acpi_suspend(), we can call acpi_hw_enable_all_wakeup_gpes() directly in enable_gpe_wakeup(). The solution is similar to commit 22db06337f590d01 ("ACPI: sleep: Avoid breaking S3 wakeup due to might_sleep()").
CVE-2025-21800 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix definer's HWS_SET32 macro for negative offset When bit offset for HWS_SET32 macro is negative, UBSAN complains about the shift-out-of-bounds: UBSAN: shift-out-of-bounds in drivers/net/ethernet/mellanox/mlx5/core/steering/hws/definer.c:177:2 shift exponent -8 is negative
CVE-2025-21799 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw: fix freeing IRQ in am65_cpsw_nuss_remove_tx_chns() When getting the IRQ we use k3_udma_glue_tx_get_irq() which returns negative error value on error. So not NULL check is not sufficient to deteremine if IRQ is valid. Check that IRQ is greater then zero to ensure it is valid. There is no issue at probe time but at runtime user can invoke .set_channels which results in the following call chain. am65_cpsw_set_channels() am65_cpsw_nuss_update_tx_rx_chns() am65_cpsw_nuss_remove_tx_chns() am65_cpsw_nuss_init_tx_chns() At this point if am65_cpsw_nuss_init_tx_chns() fails due to k3_udma_glue_tx_get_irq() then tx_chn->irq will be set to a negative value. Then, at subsequent .set_channels with higher channel count we will attempt to free an invalid IRQ in am65_cpsw_nuss_remove_tx_chns() leading to a kernel warning. The issue is present in the original commit that introduced this driver, although there, am65_cpsw_nuss_update_tx_rx_chns() existed as am65_cpsw_nuss_update_tx_chns().