Vulnerabilities (CVE)

Filtered by vendor Linux Subscribe
Total 19806 CVE
CVE Vendors Products Updated CVSS v2 CVSS v3
CVE-2025-37831 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: cpufreq: apple-soc: Fix null-ptr-deref in apple_soc_cpufreq_get_rate() cpufreq_cpu_get_raw() can return NULL when the target CPU is not present in the policy->cpus mask. apple_soc_cpufreq_get_rate() does not check for this case, which results in a NULL pointer dereference.
CVE-2025-37828 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: mcq: Add NULL check in ufshcd_mcq_abort() A race can occur between the MCQ completion path and the abort handler: once a request completes, __blk_mq_free_request() sets rq->mq_hctx to NULL, meaning the subsequent ufshcd_mcq_req_to_hwq() call in ufshcd_mcq_abort() can return a NULL pointer. If this NULL pointer is dereferenced, the kernel will crash. Add a NULL check for the returned hwq pointer. If hwq is NULL, log an error and return FAILED, preventing a potential NULL-pointer dereference. As suggested by Bart, the ufshcd_cmd_inflight() check is removed. This is similar to the fix in commit 74736103fb41 ("scsi: ufs: core: Fix ufshcd_abort_one racing issue"). This is found by our static analysis tool KNighter.
CVE-2025-37827 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: return EIO on RAID1 block group write pointer mismatch There was a bug report about a NULL pointer dereference in __btrfs_add_free_space_zoned() that ultimately happens because a conversion from the default metadata profile DUP to a RAID1 profile on two disks. The stack trace has the following signature: BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:__btrfs_add_free_space_zoned.isra.0+0x61/0x1a0 RSP: 0018:ffffa236b6f3f6d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff96c8132f3400 RCX: 0000000000000001 RDX: 0000000010000000 RSI: 0000000000000000 RDI: ffff96c8132f3410 RBP: 0000000010000000 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000 R13: ffff96c758f65a40 R14: 0000000000000001 R15: 000011aac0000000 FS: 00007fdab1cb2900(0000) GS:ffff96e60ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 00000001a05ae000 CR4: 0000000000350ef0 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? page_fault_oops+0x15c/0x2f0 ? exc_page_fault+0x7e/0x180 ? asm_exc_page_fault+0x26/0x30 ? __btrfs_add_free_space_zoned.isra.0+0x61/0x1a0 btrfs_add_free_space_async_trimmed+0x34/0x40 btrfs_add_new_free_space+0x107/0x120 btrfs_make_block_group+0x104/0x2b0 btrfs_create_chunk+0x977/0xf20 btrfs_chunk_alloc+0x174/0x510 ? srso_return_thunk+0x5/0x5f btrfs_inc_block_group_ro+0x1b1/0x230 btrfs_relocate_block_group+0x9e/0x410 btrfs_relocate_chunk+0x3f/0x130 btrfs_balance+0x8ac/0x12b0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? __kmalloc_cache_noprof+0x14c/0x3e0 btrfs_ioctl+0x2686/0x2a80 ? srso_return_thunk+0x5/0x5f ? ioctl_has_perm.constprop.0.isra.0+0xd2/0x120 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x82/0x160 ? srso_return_thunk+0x5/0x5f ? __memcg_slab_free_hook+0x11a/0x170 ? srso_return_thunk+0x5/0x5f ? kmem_cache_free+0x3f0/0x450 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? syscall_exit_to_user_mode+0x10/0x210 ? srso_return_thunk+0x5/0x5f ? do_syscall_64+0x8e/0x160 ? sysfs_emit+0xaf/0xc0 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? seq_read_iter+0x207/0x460 ? srso_return_thunk+0x5/0x5f ? vfs_read+0x29c/0x370 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? syscall_exit_to_user_mode+0x10/0x210 ? srso_return_thunk+0x5/0x5f ? do_syscall_64+0x8e/0x160 ? srso_return_thunk+0x5/0x5f ? exc_page_fault+0x7e/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fdab1e0ca6d RSP: 002b:00007ffeb2b60c80 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdab1e0ca6d RDX: 00007ffeb2b60d80 RSI: 00000000c4009420 RDI: 0000000000000003 RBP: 00007ffeb2b60cd0 R08: 0000000000000000 R09: 0000000000000013 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffeb2b6343b R14: 00007ffeb2b60d80 R15: 0000000000000001 </TASK> CR2: 0000000000000058 ---[ end trace 0000000000000000 ]--- The 1st line is the most interesting here: BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile When a RAID1 block-group is created and a write pointer mismatch between the disks in the RAID set is detected, btrfs sets the alloc_offset to the length of the block group marking it as full. Afterwards the code expects that a balance operation will evacuate the data in this block-group and repair the problems. But before this is possible, the new space of this block-group will be accounted in the free space cache. But in __btrfs_ ---truncated---
CVE-2025-37826 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Add NULL check in ufshcd_mcq_compl_pending_transfer() Add a NULL check for the returned hwq pointer by ufshcd_mcq_req_to_hwq(). This is similar to the fix in commit 74736103fb41 ("scsi: ufs: core: Fix ufshcd_abort_one racing issue").
CVE-2025-37825 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.1 HIGH
In the Linux kernel, the following vulnerability has been resolved: nvmet: fix out-of-bounds access in nvmet_enable_port When trying to enable a port that has no transport configured yet, nvmet_enable_port() uses NVMF_TRTYPE_MAX (255) to query the transports array, causing an out-of-bounds access: [ 106.058694] BUG: KASAN: global-out-of-bounds in nvmet_enable_port+0x42/0x1da [ 106.058719] Read of size 8 at addr ffffffff89dafa58 by task ln/632 [...] [ 106.076026] nvmet: transport type 255 not supported Since commit 200adac75888, NVMF_TRTYPE_MAX is the default state as configured by nvmet_ports_make(). Avoid this by checking for NVMF_TRTYPE_MAX before proceeding.
CVE-2025-37821 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash There is a code path in dequeue_entities() that can set the slice of a sched_entity to U64_MAX, which sometimes results in a crash. The offending case is when dequeue_entities() is called to dequeue a delayed group entity, and then the entity's parent's dequeue is delayed. In that case: 1. In the if (entity_is_task(se)) else block at the beginning of dequeue_entities(), slice is set to cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX. 2. The first for_each_sched_entity() loop dequeues the entity. 3. If the entity was its parent's only child, then the next iteration tries to dequeue the parent. 4. If the parent's dequeue needs to be delayed, then it breaks from the first for_each_sched_entity() loop _without updating slice_. 5. The second for_each_sched_entity() loop sets the parent's ->slice to the saved slice, which is still U64_MAX. This throws off subsequent calculations with potentially catastrophic results. A manifestation we saw in production was: 6. In update_entity_lag(), se->slice is used to calculate limit, which ends up as a huge negative number. 7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit is negative, vlag > limit, so se->vlag is set to the same huge negative number. 8. In place_entity(), se->vlag is scaled, which overflows and results in another huge (positive or negative) number. 9. The adjusted lag is subtracted from se->vruntime, which increases or decreases se->vruntime by a huge number. 10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which incorrectly returns false because the vruntime is so far from the other vruntimes on the queue, causing the (vruntime - cfs_rq->min_vruntime) * load calulation to overflow. 11. Nothing appears to be eligible, so pick_eevdf() returns NULL. 12. pick_next_entity() tries to dereference the return value of pick_eevdf() and crashes. Dumping the cfs_rq states from the core dumps with drgn showed tell-tale huge vruntime ranges and bogus vlag values, and I also traced se->slice being set to U64_MAX on live systems (which was usually "benign" since the rest of the runqueue needed to be in a particular state to crash). Fix it in dequeue_entities() by always setting slice from the first non-empty cfs_rq.
CVE-2025-37819 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode() With ACPI in place, gicv2m_get_fwnode() is registered with the pci subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime during a PCI host bridge probe. But, the call back is wrongly marked as __init, causing it to be freed, while being registered with the PCI subsystem and could trigger: Unable to handle kernel paging request at virtual address ffff8000816c0400 gicv2m_get_fwnode+0x0/0x58 (P) pci_set_bus_msi_domain+0x74/0x88 pci_register_host_bridge+0x194/0x548 This is easily reproducible on a Juno board with ACPI boot. Retain the function for later use.
CVE-2025-37818 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: LoongArch: Return NULL from huge_pte_offset() for invalid PMD LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot even if the underlying entry points to invalid_pte_table (indicating no mapping). Callers like smaps_hugetlb_range() fetch this invalid entry value (the address of invalid_pte_table) via this pointer. The generic is_swap_pte() check then incorrectly identifies this address as a swap entry on LoongArch, because it satisfies the "!pte_present() && !pte_none()" conditions. This misinterpretation, combined with a coincidental match by is_migration_entry() on the address bits, leads to kernel crashes in pfn_swap_entry_to_page(). Fix this at the architecture level by modifying huge_pte_offset() to check the PMD entry's content using pmd_none() before returning. If the entry is invalid (i.e., it points to invalid_pte_table), return NULL instead of the pointer to the slot.
CVE-2025-37817 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: mcb: fix a double free bug in chameleon_parse_gdd() In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev' would be released in mcb_device_register() via put_device(). Thus, goto 'err' label and free 'mdev' again causes a double free. Just return if mcb_device_register() fails.
CVE-2025-37816 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: mei: vsc: Fix fortify-panic caused by invalid counted_by() use gcc 15 honors the __counted_by(len) attribute on vsc_tp_packet.buf[] and the vsc-tp.c code is using this in a wrong way. len does not contain the available size in the buffer, it contains the actual packet length *without* the crc. So as soon as vsc_tp_xfer() tries to add the crc to buf[] the fortify-panic handler gets triggered: [ 80.842193] memcpy: detected buffer overflow: 4 byte write of buffer size 0 [ 80.842243] WARNING: CPU: 4 PID: 272 at lib/string_helpers.c:1032 __fortify_report+0x45/0x50 ... [ 80.843175] __fortify_panic+0x9/0xb [ 80.843186] vsc_tp_xfer.cold+0x67/0x67 [mei_vsc_hw] [ 80.843210] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90 [ 80.843229] ? lockdep_hardirqs_on+0x7c/0x110 [ 80.843250] mei_vsc_hw_start+0x98/0x120 [mei_vsc] [ 80.843270] mei_reset+0x11d/0x420 [mei] The easiest fix would be to just drop the counted-by but with the exception of the ack buffer in vsc_tp_xfer_helper() which only contains enough room for the packet-header, all other uses of vsc_tp_packet always use a buffer of VSC_TP_MAX_XFER_SIZE bytes for the packet. Instead of just dropping the counted-by, split the vsc_tp_packet struct definition into a header and a full-packet definition and use a fixed size buf[] in the packet definition, this way fortify-source buffer overrun checking still works when enabled.
CVE-2025-37815 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: misc: microchip: pci1xxxx: Fix Kernel panic during IRQ handler registration Resolve kernel panic while accessing IRQ handler associated with the generated IRQ. This is done by acquiring the spinlock and storing the current interrupt state before handling the interrupt request using generic_handle_irq. A previous fix patch was submitted where 'generic_handle_irq' was replaced with 'handle_nested_irq'. However, this change also causes the kernel panic where after determining which GPIO triggered the interrupt and attempting to call handle_nested_irq with the mapped IRQ number, leads to a failure in locating the registered handler.
CVE-2025-37812 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: Fix deadlock when using NCM gadget The cdns3 driver has the same NCM deadlock as fixed in cdnsp by commit 58f2fcb3a845 ("usb: cdnsp: Fix deadlock issue during using NCM gadget"). Under PREEMPT_RT the deadlock can be readily triggered by heavy network traffic, for example using "iperf --bidir" over NCM ethernet link. The deadlock occurs because the threaded interrupt handler gets preempted by a softirq, but both are protected by the same spinlock. Prevent deadlock by disabling softirq during threaded irq handler.
CVE-2025-37810 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: check that event count does not exceed event buffer length The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34
CVE-2025-37805 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: sound/virtio: Fix cancel_sync warnings on uninitialized work_structs Betty reported hitting the following warning: [ 8.709131][ T221] WARNING: CPU: 2 PID: 221 at kernel/workqueue.c:4182 ... [ 8.713282][ T221] Call trace: [ 8.713365][ T221] __flush_work+0x8d0/0x914 [ 8.713468][ T221] __cancel_work_sync+0xac/0xfc [ 8.713570][ T221] cancel_work_sync+0x24/0x34 [ 8.713667][ T221] virtsnd_remove+0xa8/0xf8 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276] [ 8.713868][ T221] virtsnd_probe+0x48c/0x664 [virtio_snd ab15f34d0dd772f6d11327e08a81d46dc9c36276] [ 8.714035][ T221] virtio_dev_probe+0x28c/0x390 [ 8.714139][ T221] really_probe+0x1bc/0x4c8 ... It seems we're hitting the error path in virtsnd_probe(), which triggers a virtsnd_remove() which iterates over the substreams calling cancel_work_sync() on the elapsed_period work_struct. Looking at the code, from earlier in: virtsnd_probe()->virtsnd_build_devs()->virtsnd_pcm_parse_cfg() We set snd->nsubstreams, allocate the snd->substreams, and if we then hit an error on the info allocation or something in virtsnd_ctl_query_info() fails, we will exit without having initialized the elapsed_period work_struct. When that error path unwinds we then call virtsnd_remove() which as long as the substreams array is allocated, will iterate through calling cancel_work_sync() on the uninitialized work struct hitting this warning. Takashi Iwai suggested this fix, which initializes the substreams structure right after allocation, so that if we hit the error paths we avoid trying to cleanup uninitialized data. Note: I have not yet managed to reproduce the issue myself, so this patch has had limited testing. Feedback or thoughts would be appreciated!
CVE-2025-37803 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix a buf size overflow issue during udmabuf creation by casting size_limit_mb to u64 when calculate pglimit.
CVE-2025-37796 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x: fix use after free access in at76_disconnect The memory pointed to by priv is freed at the end of at76_delete_device function (using ieee80211_free_hw). But the code then accesses the udev field of the freed object to put the USB device. This may also lead to a memory leak of the usb device. Fix this by using udev from interface.
CVE-2025-37787 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered Russell King reports that a system with mv88e6xxx dereferences a NULL pointer when unbinding this driver: https://lore.kernel.org/netdev/Z_lRkMlTJ1KQ0kVX@shell.armlinux.org.uk/ The crash seems to be in devlink_region_destroy(), which is not NULL tolerant but is given a NULL devlink global region pointer. At least on some chips, some devlink regions are conditionally registered since the blamed commit, see mv88e6xxx_setup_devlink_regions_global(): if (cond && !cond(chip)) continue; These are MV88E6XXX_REGION_STU and MV88E6XXX_REGION_PVT. If the chip does not have an STU or PVT, it should crash like this. To fix the issue, avoid unregistering those regions which are NULL, i.e. were skipped at mv88e6xxx_setup_devlink_regions_global() time.
CVE-2025-37786 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory.
CVE-2025-37784 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net: ti: icss-iep: Fix possible NULL pointer dereference for perout request The ICSS IEP driver tracks perout and pps enable state with flags. Currently when disabling pps and perout signals during icss_iep_exit(), results in NULL pointer dereference for perout. To fix the null pointer dereference issue, the icss_iep_perout_enable_hw function can be modified to directly clear the IEP CMP registers when disabling PPS or PEROUT, without referencing the ptp_perout_request structure, as its contents are irrelevant in this case.
CVE-2025-37783 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Fix error pointers in dpu_plane_virtual_atomic_check The function dpu_plane_virtual_atomic_check was dereferencing pointers returned by drm_atomic_get_plane_state without checking for errors. This could lead to undefined behavior if the function returns an error pointer. This commit adds checks using IS_ERR to ensure that plane_state is valid before dereferencing them. Similar to commit da29abe71e16 ("drm/amd/display: Fix error pointers in amdgpu_dm_crtc_mem_type_changed"). Patchwork: https://patchwork.freedesktop.org/patch/643132/