Vulnerabilities (CVE)

Filtered by vendor Linux Subscribe
Total 19806 CVE
CVE Vendors Products Updated CVSS v2 CVSS v3
CVE-2025-38469 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Fix cleanup logic in emulation of Xen schedop poll hypercalls kvm_xen_schedop_poll does a kmalloc_array() when a VM polls the host for more than one event channel potr (nr_ports > 1). After the kmalloc_array(), the error paths need to go through the "out" label, but the call to kvm_read_guest_virt() does not. [Adjusted commit message. - Paolo]
CVE-2025-38467 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/exynos: exynos7_drm_decon: add vblank check in IRQ handling If there's support for another console device (such as a TTY serial), the kernel occasionally panics during boot. The panic message and a relevant snippet of the call stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 000000000000000 Call trace: drm_crtc_handle_vblank+0x10/0x30 (P) decon_irq_handler+0x88/0xb4 [...] Otherwise, the panics don't happen. This indicates that it's some sort of race condition. Add a check to validate if the drm device can handle vblanks before calling drm_crtc_handle_vblank() to avoid this.
CVE-2025-38459 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix infinite recursive call of clip_push(). syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in:
CVE-2025-38454 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: ALSA: ad1816a: Fix potential NULL pointer deref in snd_card_ad1816a_pnp() Use pr_warn() instead of dev_warn() when 'pdev' is NULL to avoid a potential NULL pointer dereference.
CVE-2025-38452 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net: ethernet: rtsn: Fix a null pointer dereference in rtsn_probe() Add check for the return value of rcar_gen4_ptp_alloc() to prevent potential null pointer dereference.
CVE-2025-38451 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix GPF in bitmap_get_stats() The commit message of commit 6ec1f0239485 ("md/md-bitmap: fix stats collection for external bitmaps") states: Remove the external bitmap check as the statistics should be available regardless of bitmap storage location. Return -EINVAL only for invalid bitmap with no storage (neither in superblock nor in external file). But, the code does not adhere to the above, as it does only check for a valid super-block for "internal" bitmaps. Hence, we observe: Oops: GPF, probably for non-canonical address 0x1cd66f1f40000028 RIP: 0010:bitmap_get_stats+0x45/0xd0 Call Trace: seq_read_iter+0x2b9/0x46a seq_read+0x12f/0x180 proc_reg_read+0x57/0xb0 vfs_read+0xf6/0x380 ksys_read+0x6d/0xf0 do_syscall_64+0x8c/0x1b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e We fix this by checking the existence of a super-block for both the internal and external case.
CVE-2025-38448 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 4.7 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE
CVE-2025-38442 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: block: reject bs > ps block devices when THP is disabled If THP is disabled and when a block device with logical block size > page size is present, the following null ptr deref panic happens during boot: [ [13.2 mK AOSAN: null-ptr-deref in range [0x0000000000000000-0x0000000000K0 0 0[07] [ 13.017749] RIP: 0010:create_empty_buffers+0x3b/0x380 <snip> [ 13.025448] Call Trace: [ 13.025692] <TASK> [ 13.025895] block_read_full_folio+0x610/0x780 [ 13.026379] ? __pfx_blkdev_get_block+0x10/0x10 [ 13.027008] ? __folio_batch_add_and_move+0x1fa/0x2b0 [ 13.027548] ? __pfx_blkdev_read_folio+0x10/0x10 [ 13.028080] filemap_read_folio+0x9b/0x200 [ 13.028526] ? __pfx_filemap_read_folio+0x10/0x10 [ 13.029030] ? __filemap_get_folio+0x43/0x620 [ 13.029497] do_read_cache_folio+0x155/0x3b0 [ 13.029962] ? __pfx_blkdev_read_folio+0x10/0x10 [ 13.030381] read_part_sector+0xb7/0x2a0 [ 13.030805] read_lba+0x174/0x2c0 <snip> [ 13.045348] nvme_scan_ns+0x684/0x850 [nvme_core] [ 13.045858] ? __pfx_nvme_scan_ns+0x10/0x10 [nvme_core] [ 13.046414] ? _raw_spin_unlock+0x15/0x40 [ 13.046843] ? __switch_to+0x523/0x10a0 [ 13.047253] ? kvm_clock_get_cycles+0x14/0x30 [ 13.047742] ? __pfx_nvme_scan_ns_async+0x10/0x10 [nvme_core] [ 13.048353] async_run_entry_fn+0x96/0x4f0 [ 13.048787] process_one_work+0x667/0x10a0 [ 13.049219] worker_thread+0x63c/0xf60 As large folio support depends on THP, only allow bs > ps block devices if THP is enabled.
CVE-2025-38433 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: riscv: fix runtime constant support for nommu kernels the `__runtime_fixup_32` function does not handle the case where `val` is zero correctly (as might occur when patching a nommu kernel and referring to a physical address below the 4GiB boundary whose upper 32 bits are all zero) because nothing in the existing logic prevents the code from taking the `else` branch of both nop-checks and emitting two `nop` instructions. This leaves random garbage in the register that is supposed to receive the upper 32 bits of the pointer instead of zero that when combined with the value for the lower 32 bits yields an invalid pointer and causes a kernel panic when that pointer is eventually accessed. The author clearly considered the fact that if the `lui` is converted into a `nop` that the second instruction needs to be adjusted to become an `li` instead of an `addi`, hence introducing the `addi_insn_mask` variable, but didn't follow that logic through fully to the case where the `else` branch executes. To fix it just adjust the logic to ensure that the second `else` branch is not taken if the first instruction will be patched to a `nop`.
CVE-2025-38432 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net: netpoll: Initialize UDP checksum field before checksumming commit f1fce08e63fe ("netpoll: Eliminate redundant assignment") removed the initialization of the UDP checksum, which was wrong and broke netpoll IPv6 transmission due to bad checksumming. udph->check needs to be set before calling csum_ipv6_magic().
CVE-2025-38428 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - check record size in ims_pcu_flash_firmware() The "len" variable comes from the firmware and we generally do trust firmware, but it's always better to double check. If the "len" is too large it could result in memory corruption when we do "memcpy(fragment->data, rec->data, len);"
CVE-2025-38426 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add basic validation for RAS header If RAS header read from EEPROM is corrupted, it could result in trying to allocate huge memory for reading the records. Add some validation to header fields.
CVE-2025-38423 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9375: Fix double free of regulator supplies Driver gets regulator supplies in probe path with devm_regulator_bulk_get(), so should not call regulator_bulk_free() in error and remove paths to avoid double free.
CVE-2025-38419 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Cleanup acquired resources when rproc_handle_resources() fails in rproc_attach() When rproc->state = RPROC_DETACHED and rproc_attach() is used to attach to the remote processor, if rproc_handle_resources() returns a failure, the resources allocated by imx_rproc_prepare() should be released, otherwise the following memory leak will occur. Since almost the same thing is done in imx_rproc_prepare() and rproc_resource_cleanup(), Function rproc_resource_cleanup() is able to deal with empty lists so it is better to fix the "goto" statements in rproc_attach(). replace the "unprepare_device" goto statement with "clean_up_resources" and get rid of the "unprepare_device" label. unreferenced object 0xffff0000861c5d00 (size 128): comm "kworker/u12:3", pid 59, jiffies 4294893509 (age 149.220s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 02 88 00 00 00 00 00 00 10 00 00 00 00 00 ............ backtrace: [<00000000f949fe18>] slab_post_alloc_hook+0x98/0x37c [<00000000adbfb3e7>] __kmem_cache_alloc_node+0x138/0x2e0 [<00000000521c0345>] kmalloc_trace+0x40/0x158 [<000000004e330a49>] rproc_mem_entry_init+0x60/0xf8 [<000000002815755e>] imx_rproc_prepare+0xe0/0x180 [<0000000003f61b4e>] rproc_boot+0x2ec/0x528 [<00000000e7e994ac>] rproc_add+0x124/0x17c [<0000000048594076>] imx_rproc_probe+0x4ec/0x5d4 [<00000000efc298a1>] platform_probe+0x68/0xd8 [<00000000110be6fe>] really_probe+0x110/0x27c [<00000000e245c0ae>] __driver_probe_device+0x78/0x12c [<00000000f61f6f5e>] driver_probe_device+0x3c/0x118 [<00000000a7874938>] __device_attach_driver+0xb8/0xf8 [<0000000065319e69>] bus_for_each_drv+0x84/0xe4 [<00000000db3eb243>] __device_attach+0xfc/0x18c [<0000000072e4e1a4>] device_initial_probe+0x14/0x20
CVE-2025-38418 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Release rproc->clean_table after rproc_attach() fails When rproc->state = RPROC_DETACHED is attached to remote processor through rproc_attach(), if rproc_handle_resources() returns failure, then the clean table should be released, otherwise the following memory leak will occur. unreferenced object 0xffff000086a99800 (size 1024): comm "kworker/u12:3", pid 59, jiffies 4294893670 (age 121.140s) hex dump (first 32 bytes): 00 00 00 00 00 80 00 00 00 00 00 00 00 00 10 00 ............ 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 00 ............ backtrace: [<000000008bbe4ca8>] slab_post_alloc_hook+0x98/0x3fc [<000000003b8a272b>] __kmem_cache_alloc_node+0x13c/0x230 [<000000007a507c51>] __kmalloc_node_track_caller+0x5c/0x260 [<0000000037818dae>] kmemdup+0x34/0x60 [<00000000610f7f57>] rproc_boot+0x35c/0x56c [<0000000065f8871a>] rproc_add+0x124/0x17c [<00000000497416ee>] imx_rproc_probe+0x4ec/0x5d4 [<000000003bcaa37d>] platform_probe+0x68/0xd8 [<00000000771577f9>] really_probe+0x110/0x27c [<00000000531fea59>] __driver_probe_device+0x78/0x12c [<0000000080036a04>] driver_probe_device+0x3c/0x118 [<000000007e0bddcb>] __device_attach_driver+0xb8/0xf8 [<000000000cf1fa33>] bus_for_each_drv+0x84/0xe4 [<000000001a53b53e>] __device_attach+0xfc/0x18c [<00000000d1a2a32c>] device_initial_probe+0x14/0x20 [<00000000d8f8b7ae>] bus_probe_device+0xb0/0xb4 unreferenced object 0xffff0000864c9690 (size 16):
CVE-2025-38410 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix a fence leak in submit error path In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Patchwork: https://patchwork.freedesktop.org/patch/653584/
CVE-2025-38409 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix another leak in the submit error path put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Patchwork: https://patchwork.freedesktop.org/patch/653583/
CVE-2025-38407 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: riscv: cpu_ops_sbi: Use static array for boot_data Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator"), if NUMA is enabled, the page percpu allocator may be used on very sparse configurations, or when requested on boot with percpu_alloc=page. In that case, percpu data gets put in the vmalloc area. However, sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data, and simply assumes that __pa() would work. This causes the just started hart to immediately access an invalid address and hang. Fortunately, struct sbi_hart_boot_data is not too large, so we can simply allocate an array for boot_data statically, putting it in the kernel image. This fixes NUMA=y SMP boot on Sophgo SG2042. To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then run with: qemu-system-riscv64 -M virt -smp 2 -nographic \ -kernel arch/riscv/boot/Image \ -append "percpu_alloc=page" Kernel output: [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025 ... [ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712 ... [ 0.083192] smp: Bringing up secondary CPUs ... [ 0.086722] ------------[ cut here ]------------ [ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080) [ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8 [ 0.088376] Modules linked in: [ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE [ 0.088833] Hardware name: riscv-virtio,qemu (DT) [ 0.088948] epc : __virt_to_phys+0xae/0xe8 [ 0.089001] ra : __virt_to_phys+0xae/0xe8 [ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0 [ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976 [ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0 [ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000 [ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001 [ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec [ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000 [ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7 [ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8 [ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003 [ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8 [ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8 [ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c [ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258 [ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c [ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc [ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244 [ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90 [ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118 [ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8 [ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4 [ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c [ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0 [ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18 [ 0.090560] ---[ end trace 0000000000000000 ]--- [ 1.179875] CPU1: failed to come online [ 1.190324] smp: Brought up 1 node, 1 CPU
CVE-2025-38406 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: remove WARN on bad firmware input If the firmware gives bad input, that's nothing to do with the driver's stack at this point etc., so the WARN_ON() doesn't add any value. Additionally, this is one of the top syzbot reports now. Just print a message, and as an added bonus, print the sizes too.
CVE-2025-38404 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: usb: typec: displayport: Fix potential deadlock The deadlock can occur due to a recursive lock acquisition of `cros_typec_altmode_data::mutex`. The call chain is as follows: 1. cros_typec_altmode_work() acquires the mutex 2. typec_altmode_vdm() -> dp_altmode_vdm() -> 3. typec_altmode_exit() -> cros_typec_altmode_exit() 4. cros_typec_altmode_exit() attempts to acquire the mutex again To prevent this, defer the `typec_altmode_exit()` call by scheduling it rather than calling it directly from within the mutex-protected context.