Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-46002 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext2: reject inodes with zero i_nlink and valid mode in ext2_iget() ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is zero or i_dtime is set, treating them as deleted. However, the case of i_nlink == 0 with a non-zero mode and zero dtime slips through. Since ext2 has no orphan list, such a combination can only result from filesystem corruption - a legitimate inode deletion always sets either i_dtime or clears i_mode before freeing the inode. A crafted image can exploit this gap to present such an inode to the VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via ext2_unlink(), ext2_rename() and ext2_rmdir(): WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295 vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477 do_unlinkat+0x53e/0x730 fs/namei.c:4541 __x64_sys_unlink+0xc6/0x110 fs/namei.c:4587 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rename+0x35e/0x850 fs/ext2/namei.c:374 vfs_rename+0xf2f/0x2060 fs/namei.c:5021 do_renameat2+0xbe2/0xd50 fs/namei.c:5178 __x64_sys_rename+0x7e/0xa0 fs/namei.c:5223 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311 vfs_rmdir+0x204/0x690 fs/namei.c:4348 do_rmdir+0x372/0x3e0 fs/namei.c:4407 __x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Extend the existing i_nlink == 0 check to also catch this case, reporting the corruption via ext2_error() and returning -EFSCORRUPTED. This rejects the inode at load time and prevents it from reaching any of the namei.c paths. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | |||||
| CVE-2026-46001 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data() Fix two bugs in pt5161l_read_block_data(): 1. Buffer overrun: The local buffer rbuf is declared as u8 rbuf[24], but i2c_smbus_read_block_data() can return up to I2C_SMBUS_BLOCK_MAX (32) bytes. The i2c-core copies the data into the caller's buffer before the return value can be checked, so the post-read length validation does not prevent a stack overrun if a device returns more than 24 bytes. Resize the buffer to I2C_SMBUS_BLOCK_MAX. 2. Unexpected positive return on length mismatch: When all three retries are exhausted because the device returns data with an unexpected length, i2c_smbus_read_block_data() returns a positive byte count. The function returns this directly, and callers treat any non-negative return as success, processing stale or incomplete buffer contents. Return -EIO when retries are exhausted with a positive return value, preserving the negative error code on I2C failure. | |||||
| CVE-2026-45995 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_struct uaf io_free_rbuf_ring() usees a struct user_struct, which io_zcrx_ifq_free() puts it down before destroying the ring. | |||||
| CVE-2026-45994 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix OOB reads in command_file_write due to missing size checks The command_file_write() handler allocates a kernel buffer of exactly count bytes and copies user data into it, but does not validate the buffer against the dot command protocol before passing it to get_dot_command_size() and get_dot_command_timeout(). Since both the allocation size (count) and the header fields (command_size, data_size) are independently user-controlled, an attacker can cause get_dot_command_size() to return a value exceeding the allocation, triggering OOB reads in get_dot_command_timeout() and an out-of-bounds memcpy_toio() that leaks kernel heap memory to the service processor. Fix with two guards: reject writes smaller than sizeof(struct dot_command_header) before allocation, then after copying user data reject commands where the buffer is smaller than the total size declared by the header (sizeof(header) + command_size + data_size). This ensures all subsequent header and payload field accesses stay within the buffer. | |||||
| CVE-2026-45990 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: slub: fix data loss and overflow in krealloc() Commit 2cd8231796b5 ("mm/slub: allow to set node and align in k[v]realloc") introduced the ability to force a reallocation if the original object does not satisfy new alignment or NUMA node, even when the object is being shrunk. This introduced two bugs in the reallocation fallback path: 1. Data loss during NUMA migration: The jump to 'alloc_new' happens before 'ks' and 'orig_size' are initialized. As a result, the memcpy() in the 'alloc_new' block would copy 0 bytes into the new allocation. 2. Buffer overflow during shrinking: When shrinking an object while forcing a new alignment, 'new_size' is smaller than the old size. However, the memcpy() used the old size ('orig_size ?: ks'), leading to an out-of-bounds write. The same overflow bug exists in the kvrealloc() fallback path, where the old bucket size ksize(p) is copied into the new buffer without being bounded by the new size. A simple reproducer: // e.g. add to lkdtm as KREALLOC_SHRINK_OVERFLOW while (1) { void *p = kmalloc(128, GFP_KERNEL); p = krealloc_node_align(p, 64, 256, GFP_KERNEL, NUMA_NO_NODE); kfree(p); } demonstrates the issue: ================================================================== BUG: KFENCE: out-of-bounds write in memcpy_orig+0x68/0x130 Out-of-bounds write at 0xffff8883ad757038 (120B right of kfence-#47): memcpy_orig+0x68/0x130 krealloc_node_align_noprof+0x1c8/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... kfence-#47: 0xffff8883ad756fc0-0xffff8883ad756fff, size=64, cache=kmalloc-64 allocated by task 316 on cpu 7 at 97.680481s (0.021813s ago): krealloc_node_align_noprof+0x19c/0x340 lkdtm_KREALLOC_SHRINK_OVERFLOW+0x8c/0xc0 [lkdtm] lkdtm_do_action+0x3a/0x60 [lkdtm] ... ================================================================== Fix it by moving the old size calculation to the top of __do_krealloc() and bounding all copy lengths by the new allocation size. | |||||
| CVE-2026-45989 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix use-after-free in testdrv_probe() The function testdrv_probe() retrieves the device_node from the PCI device, applies an overlay, and then immediately calls of_node_put(dn). This releases the reference held by the PCI core, potentially freeing the node if the reference count drops to zero. Later, the same freed pointer 'dn' is passed to of_platform_default_populate(), leading to a use-after-free. The reference to pdev->dev.of_node is owned by the device model and should not be released by the driver. Remove the erroneous of_node_put() to prevent premature freeing. | |||||
| CVE-2026-45986 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - fix a memory leak in cc_mac_digest() Add cc_unmap_result() if cc_map_hash_request_final() fails to prevent potential memory leak. | |||||
| CVE-2026-45980 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Stop job scheduling across aie2_release_resource() Running jobs on a hardware context while it is in the process of releasing resources can lead to use-after-free and crashes. Fix this by stopping job scheduling before calling aie2_release_resource() and restarting it after the release completes. Additionally, aie2_sched_job_run() now checks whether the hardware context is still active. | |||||
| CVE-2026-45978 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: staging: greybus: lights: avoid NULL deref gb_lights_light_config() stores channel_count before allocating the channels array. If kcalloc() fails, gb_lights_release() iterates the non-zero count and dereferences light->channels, which is NULL. Allocate channels first and only then publish channels_count so the cleanup path can't walk a NULL pointer. | |||||
| CVE-2026-45977 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbnic: close fw_log race between users and teardown Fixes a theoretical race on fw_log between the teardown path and fw_log write functions. fw_log is written inside fbnic_fw_log_write() and can be reached from the mailbox handler fbnic_fw_msix_intr(), but fw_log is freed before IRQ/MBX teardown during cleanup, resulting in a potential data race of dereferencing a freed/null variable. Possible Interleaving Scenario: CPU0: fbnic_fw_msix_intr() // Entry fbnic_fw_log_write() if (fbnic_fw_log_ready()) // true ... preempt ... CPU1: fbnic_remove() // Entry fbnic_fw_log_free() vfree(log->data_start); log->data_start = NULL; CPU0: continues, walks log->entries or writes to log->data_start The initialization also has an incorrect order problem, as the fw_log is currently allocated after MBX setup during initialization. Fix the problems by adjusting the synchronization order to put initialization in place before the mailbox is enabled, and not cleared until after the mailbox has been disabled. | |||||
| CVE-2026-45975 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ublk: use READ_ONCE() to read struct ublksrv_ctrl_cmd struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in userspace-mapped memory. It's racy to access its fields with normal loads, as userspace may write to them concurrently. Use READ_ONCE() to copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the local copy in place of the one in the io_uring_sqe. | |||||
| CVE-2026-45971 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Limit bpf program signature size Practical BPF signatures are significantly smaller than KMALLOC_MAX_CACHE_SIZE Allowing larger sizes opens the door for abuse by passing excessive size values and forcing the kernel into expensive allocation paths (via kmalloc_large or vmalloc). | |||||
| CVE-2026-45969 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: HID: playstation: Add missing check for input_ff_create_memless The ps_gamepad_create() function calls input_ff_create_memless() without verifying its return value, which can lead to incorrect behavior or potential crashes when FF effects are triggered. Add a check for the return value of input_ff_create_memless(). | |||||
| CVE-2026-45967 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Return proper address for non-zero offsets in insn array The map_direct_value_addr() function of the instruction array map incorrectly adds offset to the resulting address. This is a bug, because later the resolve_pseudo_ldimm64() function adds the offset. Fix it. Corresponding selftests are added in a consequent commit. | |||||
| CVE-2026-45966 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in __unix_needs_revalidation When receiving file descriptors via SCM_RIGHTS, both the socket pointer and the socket's sk pointer can be NULL during socket setup or teardown, causing NULL pointer dereferences in __unix_needs_revalidation(). This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new __unix_needs_revalidation() function was added without proper NULL checks. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0x0000000000000018 RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0) Call Trace: apparmor_file_receive+0x42/0x80 security_file_receive+0x2e/0x50 receive_fd+0x1d/0xf0 scm_detach_fds+0xad/0x1c0 The function dereferences sock->sk->sk_family without checking if either sock or sock->sk is NULL first. Add NULL checks for both sock and sock->sk before accessing sk_family. | |||||
| CVE-2026-45965 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix invalid deref of rawdata when export_binary is unset If the export_binary parameter is disabled on runtime, profiles that were loaded before that will still have their rawdata stored in apparmorfs, with a symbolic link to the rawdata on the policy directory. When one of those profiles are replaced, the rawdata is set to NULL, but when trying to resolve the symbolic links to rawdata for that profile, it will try to dereference profile->rawdata->name when profile->rawdata is now NULL causing an oops. Fix it by checking if rawdata is set. [ 168.653080] BUG: kernel NULL pointer dereference, address: 0000000000000088 [ 168.657420] #PF: supervisor read access in kernel mode [ 168.660619] #PF: error_code(0x0000) - not-present page [ 168.663613] PGD 0 P4D 0 [ 168.665450] Oops: Oops: 0000 [#1] SMP NOPTI [ 168.667836] CPU: 1 UID: 0 PID: 1729 Comm: ls Not tainted 6.19.0-rc7+ #3 PREEMPT(voluntary) [ 168.672308] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 168.679327] RIP: 0010:rawdata_get_link_base.isra.0+0x23/0x330 [ 168.682768] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 48 89 55 d0 48 85 ff 0f 84 e3 01 00 00 <48> 83 3c 25 88 00 00 00 00 0f 84 d4 01 00 00 49 89 f6 49 89 cc e8 [ 168.689818] RSP: 0018:ffffcdcb8200fb80 EFLAGS: 00010282 [ 168.690871] RAX: ffffffffaee74ec0 RBX: 0000000000000000 RCX: ffffffffb0120158 [ 168.692251] RDX: ffffcdcb8200fbe0 RSI: ffff88c187c9fa80 RDI: ffff88c186c98a80 [ 168.693593] RBP: ffffcdcb8200fbc0 R08: 0000000000000000 R09: 0000000000000000 [ 168.694941] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88c186c98a80 [ 168.696289] R13: 00007fff005aaa20 R14: 0000000000000080 R15: ffff88c188f4fce0 [ 168.697637] FS: 0000790e81c58280(0000) GS:ffff88c20a957000(0000) knlGS:0000000000000000 [ 168.699227] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.700349] CR2: 0000000000000088 CR3: 000000012fd3e000 CR4: 0000000000350ef0 [ 168.701696] Call Trace: [ 168.702325] <TASK> [ 168.702995] rawdata_get_link_data+0x1c/0x30 [ 168.704145] vfs_readlink+0xd4/0x160 [ 168.705152] do_readlinkat+0x114/0x180 [ 168.706214] __x64_sys_readlink+0x1e/0x30 [ 168.708653] x64_sys_call+0x1d77/0x26b0 [ 168.709525] do_syscall_64+0x81/0x500 [ 168.710348] ? do_statx+0x72/0xb0 [ 168.711109] ? putname+0x3e/0x80 [ 168.711845] ? __x64_sys_statx+0xb7/0x100 [ 168.712711] ? x64_sys_call+0x10fc/0x26b0 [ 168.713577] ? do_syscall_64+0xbf/0x500 [ 168.714412] ? do_user_addr_fault+0x1d2/0x8d0 [ 168.715404] ? irqentry_exit+0xb2/0x740 [ 168.716359] ? exc_page_fault+0x90/0x1b0 [ 168.717307] entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2026-45962 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before IO_URING_F_SQE128 flag check. This could cause out of boundary memory access. Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return -EINVAL immediately if the flag is not set. | |||||
| CVE-2026-45960 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: return error when node already exists in hfs_bnode_create When hfs_bnode_create() finds that a node is already hashed (which should not happen in normal operation), it currently returns the existing node without incrementing its reference count. This causes a reference count inconsistency that leads to a kernel panic when the node is later freed in hfs_bnode_put(): kernel BUG at fs/hfsplus/bnode.c:676! BUG_ON(!atomic_read(&node->refcnt)) This scenario can occur when hfs_bmap_alloc() attempts to allocate a node that is already in use (e.g., when node 0's bitmap bit is incorrectly unset), or due to filesystem corruption. Returning an existing node from a create path is not normal operation. Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's already hashed. This properly signals the error condition to callers, which already check for IS_ERR() return values. | |||||
| CVE-2026-45958 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: fix to avoid directly dereferencing user pointer In vidi_connection_ioctl(), vidi->edid(user pointer) is directly dereferenced in the kernel. This allows arbitrary kernel memory access from the user space, so instead of directly accessing the user pointer in the kernel, we should modify it to copy edid to kernel memory using copy_from_user() and use it. | |||||
| CVE-2026-45954 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe() In au1200fb_drv_probe(), when platform_get_irq fails(), it directly returns from the function with an error code, which causes a memory leak. Replace it with a goto label to ensure proper cleanup. | |||||
