Vulnerabilities (CVE)

Filtered by vendor Linux Subscribe
Total 19806 CVE
CVE Vendors Products Updated CVSS v2 CVSS v3
CVE-2026-46142 1 Linux 1 Linux Kernel 2026-06-24 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix VF illegal register access Register WX_CFG_PORT_ST is a PF restricted register. When a VF is initialized, attempting to read this register triggers an illegal register access, which lead to a system hang. When the device is VF, the bus function ID can be obtained directly from the PCI_FUNC(pdev->devfn).
CVE-2026-46067 1 Linux 1 Linux Kernel 2026-06-24 N/A 7.1 HIGH
In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp Users can set damos_quota_goal->nid with arbitrary value for node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA() without a validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo mkdir /sys/fs/cgroup/foo $ sudo ./damo start --damos_action stat --damos_quota_interval 1s \ --damos_quota_goal node_memcg_used_bp 50% -1 /foo $ sudo dmseg [...] [ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00 Fix this issue by adding the validation of the given node id. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio.
CVE-2026-46143 1 Linux 1 Linux Kernel 2026-06-24 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm-lpass-dai: Fix multiple graph opens As prepare can be called mulitple times, this can result in multiple graph opens for playback path. This will result in a memory leaks, fix this by adding a check before opening.
CVE-2026-46072 1 Linux 1 Linux Kernel 2026-06-24 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: ntfs3: add buffer boundary checks to run_unpack() run_unpack() checks `run_buf < run_last` at the top of the while loop but then reads size_size and offset_size bytes via run_unpack_s64() without verifying they fit within the remaining buffer. A crafted NTFS image with truncated run data in an MFT attribute triggers an OOB heap read of up to 15 bytes when the filesystem is mounted. Add boundary checks before each run_unpack_s64() call to ensure the declared field size does not exceed the remaining buffer. Found by fuzzing with a source-patched harness (LibAFL + QEMU).
CVE-2026-46073 1 Linux 1 Linux Kernel 2026-06-24 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when interrupted. This needs to abort the URB and return an error. No data has been received from the device so any reads from the transfer buffer are invalid. The original code tests !ret, which only catches the timeout case (0). On signal delivery (-ERESTARTSYS), !ret is false so the function skips usb_kill_urb() and falls through to read from the unfilled transfer buffer. Fix by capturing the return value into a long (matching the function return type) and handling signal (negative) and timeout (zero) cases with separate checks that both call usb_kill_urb() before returning.
CVE-2026-46074 1 Linux 1 Linux Kernel 2026-06-24 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix memory leaks on probe failures Make sure to deregister the controller, disable pins, and kill and free the RX URB on probe failures to mirror disconnect and avoid memory leaks and use-after-free. Also add an explicit URB kill on disconnect for symmetry (even if that is not strictly required as USB core would have stopped it in the current setup).
CVE-2026-46075 1 Linux 1 Linux Kernel 2026-06-24 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path Unregister the hwrng to prevent new ->read() calls and flush the Atmel I2C workqueue before teardown to prevent a potential UAF if a queued callback runs while the device is being removed. Drop the early return to ensure sysfs entries are removed and ->hwrng.priv is freed, preventing a memory leak.
CVE-2026-46123 1 Linux 1 Linux Kernel 2026-06-24 N/A 7.7 HIGH
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: clamp rx length before skb_put virtbt_rx_work() calls skb_put(skb, len) where len comes directly from virtqueue_get_buf() with no validation against the buffer we posted to the device. The RX skb is allocated in virtbt_add_inbuf() and exposed to virtio as exactly 1000 bytes via sg_init_one(). Checking len against skb_tailroom(skb) is not sufficient because alloc_skb() can leave more tailroom than the 1000 bytes actually handed to the device. A malicious or buggy backend can therefore report used.len between 1001 and skb_tailroom(skb), causing skb_put() to include uninitialized kernel heap bytes that were never written by the device. The same path also accepts len == 0, in which case skb_put(skb, 0) leaves the skb empty but virtbt_rx_handle() still reads the pkt_type byte from skb->data, consuming uninitialized memory. Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and sg_init_one(), and gate virtbt_rx_work() on that same constant so the bound checked matches the buffer actually exposed to the device. Reject used.len == 0 in the same gate so an empty completion can no longer reach virtbt_rx_handle(). Use bt_dev_err_ratelimited() because the length value comes from an untrusted backend that can otherwise flood the kernel log. Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened the USB 9p transport against unchecked device-reported length.
CVE-2026-45900 1 Linux 1 Linux Kernel 2026-06-24 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix netdev memory leak in dpaa2_caam_probe When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in dpaa2") converted embedded net_device to dynamically allocated pointers, it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in dpaa2_dpseci_free() for error paths. This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe due to DPIO devices not being ready yet. The kernel's deferred probe mechanism handles the retry successfully, but the netdevs allocated during the failed probe attempt are never freed, resulting in kmemleak reports showing multiple leaked netdev-related allocations all traced back to dpaa2_caam_probe(). Fix this by preserving the CPU mask of allocated netdevs during setup and using it for cleanup in dpaa2_dpseci_free(). This approach ensures that only the CPUs that actually had netdevs allocated will be cleaned up, avoiding potential issues with CPU hotplug scenarios.
CVE-2026-45902 1 Linux 1 Linux Kernel 2026-06-24 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVE-2026-45903 1 Linux 1 Linux Kernel 2026-06-24 N/A 7.1 HIGH
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memory access flags in helper prototypes After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"), the verifier started relying on the access type flags in helper function prototypes to perform memory access optimizations. Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the verifier to incorrectly assume that the buffer contents are unchanged across the helper call. Consequently, the verifier may optimize away subsequent reads based on this wrong assumption, leading to correctness issues. For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM which correctly indicates write access to potentially uninitialized memory. Similar issues were recently addressed for specific helpers in commit ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer") and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args"). Fix these prototypes by adding the correct memory access flags.
CVE-2026-45906 1 Linux 1 Linux Kernel 2026-06-24 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: power: supply: pf1550: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.
CVE-2026-45907 1 Linux 1 Linux Kernel 2026-06-24 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlocks between devlink and netdev instance locks In the mentioned "Fixes" commit, various work tasks triggering devlink health reporter recovery were switched to use netdev_trylock to protect against concurrent tear down of the channels being recovered. But this had the side effect of introducing potential deadlocks because of incorrect lock ordering. The correct lock order is described by the init flow: probe_one -> mlx5_init_one (acquires devlink lock) -> mlx5_init_one_devl_locked -> mlx5_register_device -> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe -> register_netdev (acquires rtnl lock) -> register_netdevice (acquires netdev lock) => devlink lock -> rtnl lock -> netdev lock. But in the current recovery flow, the order is wrong: mlx5e_tx_err_cqe_work (acquires netdev lock) -> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report -> devlink_health_report (acquires devlink lock => boom!) -> devlink_health_reporter_recover -> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx -> mlx5e_tx_reporter_err_cqe_recover The same pattern exists in: mlx5e_reporter_rx_timeout mlx5e_reporter_tx_ptpsq_unhealthy mlx5e_reporter_tx_timeout Fix these by moving the netdev_trylock calls from the work handlers lower in the call stack, in the respective recovery functions, where they are actually necessary.
CVE-2026-45908 1 Linux 1 Linux Kernel 2026-06-24 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix memory leak in amdxdna_ubuf_map The amdxdna_ubuf_map() function allocates memory for sg and internal sg table structures, but it fails to free them if subsequent operations (sg_alloc_table_from_pages or dma_map_sgtable) fail.
CVE-2026-45909 1 Linux 1 Linux Kernel 2026-06-24 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Drop __initconst from gates Since commit 8ceff24a754a ("clk: mediatek: clk-gate: Refactor mtk_clk_register_gate to use mtk_gate struct") the mtk_gate structs are no longer just used for initialization/registration, but also at runtime. So drop __initconst annotations.
CVE-2026-45911 1 Linux 1 Linux Kernel 2026-06-24 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipped. So skip the resume operation for the new role if a role switch occurs during resume. Once the resume sequence is complete, the xhci-hcd device can be probed in case of host mode. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208 Mem abort info: ... Data abort info: ... [0000000000000208] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted 6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT Hardware name: Texas Instruments J7200 EVM (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usb_hcd_is_primary_hcd+0x0/0x1c lr : cdns_host_resume+0x24/0x5c ... Call trace: usb_hcd_is_primary_hcd+0x0/0x1c (P) cdns_resume+0x6c/0xbc cdns3_controller_resume.isra.0+0xe8/0x17c cdns3_plat_resume+0x18/0x24 platform_pm_resume+0x2c/0x68 dpm_run_callback+0x90/0x248 device_resume+0x100/0x24c dpm_resume+0x190/0x2ec dpm_resume_end+0x18/0x34 suspend_devices_and_enter+0x2b0/0xa44 pm_suspend+0x16c/0x5fc state_store+0x80/0xec kobj_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x130/0x1dc vfs_write+0x240/0x370 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0x108 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401) ---[ end trace 0000000000000000 ]---
CVE-2026-45914 1 Linux 1 Linux Kernel 2026-06-24 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: Revert "hwmon: (ibmpex) fix use-after-free in high/low store" This reverts commit 6946c726c3f4c36f0f049e6f97e88c510b15f65d. Jean Delvare points out that the patch does not completely fix the reported problem, that it in fact introduces a (new) race condition, and that it may actually not be needed in the first place. Various AI reviews agree. Specific and relevant AI feedback: " This reordering sets the driver data to NULL before removing the sensor attributes in the loop below. ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but does not check if it is NULL before dereferencing it to access data->sensors[]. If a userspace process reads a sensor file (like temp1_input) while this delete function is running, could it race with the dev_set_drvdata(..., NULL) call here and crash in ibmpex_show_sensor()? Would it be safer to keep the original order where device_remove_file() is called before clearing the driver data? device_remove_file() should wait for any active sysfs callbacks to complete, which might already prevent the use-after-free this patch intends to fix. " Revert the offending patch. If it can be shown that the originally reported alleged race condition does indeed exist, it can always be re-introduced with a complete fix.
CVE-2026-8646 4 Apple, Ibm, Linux and 1 more 7 Macos, Aix, I and 4 more 2026-06-24 N/A 7.4 HIGH
IBM WebSphere Application Server 9.0 and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to HTTP request smuggling. A remote attacker could smuggle a specially crafted request to the application server thereby allowing the attacker to bypass security controls, spoof identity, escalate privilege, and expose sensitive information.
CVE-2026-9320 4 Apple, Ibm, Linux and 1 more 7 Macos, Aix, I and 4 more 2026-06-23 N/A 5.9 MEDIUM
IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.
CVE-2026-9071 4 Apple, Ibm, Linux and 1 more 7 Macos, Aix, I and 4 more 2026-06-23 N/A 7.5 HIGH
IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.