Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-43379 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close() opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being accessed after rcu_read_unlock() has been called. This creates a race condition where the memory could be freed by a concurrent writer between the unlock and the subsequent pointer dereferences (opinfo->is_lease, etc.), leading to a use-after-free. | |||||
| CVE-2026-43214 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2() Add SRCU read-side protection when reading PDPTR registers in __get_sregs2(). Reading PDPTRs may trigger access to guest memory: kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() -> kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot() kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(), which uses srcu_dereference_check() and requires either kvm->srcu or kvm->slots_lock to be held. Currently only vcpu->mutex is held, triggering lockdep warning: ============================= WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot 6.12.59+ #3 Not tainted include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz.5.1717/15100: #0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120 lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824 __kvm_memslots include/linux/kvm_host.h:1062 [inline] __kvm_memslots include/linux/kvm_host.h:1059 [inline] kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline] kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617 kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302 load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065 svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688 kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline] __get_sregs2 arch/x86/kvm/x86.c:11784 [inline] kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279 kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | |||||
| CVE-2026-43359 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on set received ioctl due to item overflow If the set received ioctl fails due to an item overflow when attempting to add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction since we did some metadata updates before. This means that if a user calls this ioctl with the same received UUID field for a lot of subvolumes, we will hit the overflow, trigger the transaction abort and turn the filesystem into RO mode. A malicious user could exploit this, and this ioctl does not even requires that a user has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume. Fix this by doing an early check for item overflow before starting a transaction. This is also race safe because we are holding the subvol_sem semaphore in exclusive (write) mode. A test case for fstests will follow soon. | |||||
| CVE-2026-43429 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely. | |||||
| CVE-2026-43398 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in wait ioctl Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. v2: squash in Srini's fix (cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476) | |||||
| CVE-2026-43247 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix SError of kernel panic when closed SError of kernel panic rarely happened while testing fluster. The root cause was to enter suspend mode because timeout of autosuspend delay happened. [ 48.834439] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError [ 48.834455] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7 [ 48.834461] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025 [ 48.834464] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 48.834468] pc : wave5_dec_clr_disp_flag+0x40/0x80 [wave5] [ 48.834488] lr : wave5_dec_clr_disp_flag+0x40/0x80 [wave5] [ 48.834495] sp : ffff8000856e3a30 [ 48.834497] x29: ffff8000856e3a30 x28: ffff0008093f6010 x27: ffff000809158130 [ 48.834504] x26: 0000000000000000 x25: ffff00080b625000 x24: ffff000804a9ba80 [ 48.834509] x23: ffff000802343028 x22: ffff000809158150 x21: ffff000802218000 [ 48.834513] x20: ffff0008093f6000 x19: ffff0008093f6000 x18: 0000000000000000 [ 48.834518] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff74009618 [ 48.834523] x14: 000000010000000c x13: 0000000000000000 x12: 0000000000000000 [ 48.834527] x11: ffffffffffffffff x10: ffffffffffffffff x9 : ffff000802343028 [ 48.834532] x8 : ffff00080b6252a0 x7 : 0000000000000038 x6 : 0000000000000000 [ 48.834536] x5 : ffff00080b625060 x4 : 0000000000000000 x3 : 0000000000000000 [ 48.834541] x2 : 0000000000000000 x1 : ffff800084bf0118 x0 : ffff800084bf0000 [ 48.834547] Kernel panic - not syncing: Asynchronous SError Interrupt [ 48.834549] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7 [ 48.834554] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025 [ 48.834556] Call trace: [ 48.834559] dump_backtrace+0x94/0xec [ 48.834574] show_stack+0x18/0x24 [ 48.834579] dump_stack_lvl+0x38/0x90 [ 48.834585] dump_stack+0x18/0x24 [ 48.834588] panic+0x35c/0x3e0 [ 48.834592] nmi_panic+0x40/0x8c [ 48.834595] arm64_serror_panic+0x64/0x70 [ 48.834598] do_serror+0x3c/0x78 [ 48.834601] el1h_64_error_handler+0x34/0x4c [ 48.834605] el1h_64_error+0x64/0x68 [ 48.834608] wave5_dec_clr_disp_flag+0x40/0x80 [wave5] [ 48.834615] wave5_vpu_dec_clr_disp_flag+0x54/0x80 [wave5] [ 48.834622] wave5_vpu_dec_buf_queue+0x19c/0x1a0 [wave5] [ 48.834628] __enqueue_in_driver+0x3c/0x74 [videobuf2_common] [ 48.834639] vb2_core_qbuf+0x508/0x61c [videobuf2_common] [ 48.834646] vb2_qbuf+0xa4/0x168 [videobuf2_v4l2] [ 48.834656] v4l2_m2m_qbuf+0x80/0x238 [v4l2_mem2mem] [ 48.834666] v4l2_m2m_ioctl_qbuf+0x18/0x24 [v4l2_mem2mem] [ 48.834673] v4l_qbuf+0x48/0x5c [videodev] [ 48.834704] __video_do_ioctl+0x180/0x3f0 [videodev] [ 48.834725] video_usercopy+0x2ec/0x68c [videodev] [ 48.834745] video_ioctl2+0x18/0x24 [videodev] [ 48.834766] v4l2_ioctl+0x40/0x60 [videodev] [ 48.834786] __arm64_sys_ioctl+0xa8/0xec [ 48.834793] invoke_syscall+0x44/0x100 [ 48.834800] el0_svc_common.constprop.0+0xc0/0xe0 [ 48.834804] do_el0_svc+0x1c/0x28 [ 48.834809] el0_svc+0x30/0xd0 [ 48.834813] el0t_64_sync_handler+0xc0/0xc4 [ 48.834816] el0t_64_sync+0x190/0x194 [ 48.834820] SMP: stopping secondary CPUs [ 48.834831] Kernel Offset: disabled [ 48.834833] CPU features: 0x08,00002002,80200000,4200421b [ 48.834837] Memory Limit: none [ 49.161404] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]--- | |||||
| CVE-2026-43367 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix a few more NULL pointer dereference in device cleanup I found a few more paths that cleanup fails due to a NULL version pointer on unsupported hardware. Add NULL checks as applicable. (cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2) | |||||
| CVE-2026-43251 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: HID: prodikeys: Check presence of pm->input_ep82 Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, pm->input_ep82 stays NULL, which leads to a crash later. This does not happen with the real device, but can be provoked by imposing as one. | |||||
| CVE-2026-43254 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - fix packet extraction from stream When processing TCP stream data in ovpn_tcp_recv, we receive large cloned skbs from __strp_rcv that may contain multiple coalesced packets. The current implementation has two bugs: 1. Header offset overflow: Using pskb_pull with large offsets on coalesced skbs causes skb->data - skb->head to exceed the u16 storage of skb->network_header. This causes skb_reset_network_header to fail on the inner decapsulated packet, resulting in packet drops. 2. Unaligned protocol headers: Extracting packets from arbitrary positions within the coalesced TCP stream provides no alignment guarantees for the packet data causing performance penalties on architectures without efficient unaligned access. Additionally, openvpn's 2-byte length prefix on TCP packets causes the subsequent 4-byte opcode and packet ID fields to be inherently misaligned. Fix both issues by allocating a new skb for each openvpn packet and using skb_copy_bits to extract only the packet content into the new buffer, skipping the 2-byte length prefix. Also, check the length before invoking the function that performs the allocation to avoid creating an invalid skb. If the packet has to be forwarded to userspace the 2-byte prefix can be pushed to the head safely, without misalignment. As a side effect, this approach also avoids the expensive linearization that pskb_pull triggers on cloned skbs with page fragments. In testing, this resulted in TCP throughput improvements of up to 74%. | |||||
| CVE-2026-43366 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks. | |||||
| CVE-2026-43162 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: tegra-video: Fix memory leak in __tegra_channel_try_format() The state object allocated by __v4l2_subdev_state_alloc() must be freed with __v4l2_subdev_state_free() when it is no longer needed. In __tegra_channel_try_format(), two error paths return directly after v4l2_subdev_call() fails, without freeing the allocated 'sd_state' object. This violates the requirement and causes a memory leak. Fix this by introducing a cleanup label and using goto statements in the error paths to ensure that __v4l2_subdev_state_free() is always called before the function returns. | |||||
| CVE-2026-43241 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS, This patch protects against invalid index out of bounds access to mw_sizes When invalid access print message to user that configuration is not valid. | |||||
| CVE-2026-43412 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: qdsp6: Fix q6apm remove ordering during ADSP stop and start During ADSP stop and start, the kernel crashes due to the order in which ASoC components are removed. On ADSP stop, the q6apm-audio .remove callback unloads topology and removes PCM runtimes during ASoC teardown. This deletes the RTDs that contain the q6apm DAI components before their removal pass runs, leaving those components still linked to the card and causing crashes on the next rebind. Fix this by ensuring that all dependent (child) components are removed first, and the q6apm component is removed last. [ 48.105720] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 [ 48.114763] Mem abort info: [ 48.117650] ESR = 0x0000000096000004 [ 48.121526] EC = 0x25: DABT (current EL), IL = 32 bits [ 48.127010] SET = 0, FnV = 0 [ 48.130172] EA = 0, S1PTW = 0 [ 48.133415] FSC = 0x04: level 0 translation fault [ 48.138446] Data abort info: [ 48.141422] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 48.147079] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 48.152354] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 48.157859] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001173cf000 [ 48.164517] [00000000000000d0] pgd=0000000000000000, p4d=0000000000000000 [ 48.171530] Internal error: Oops: 0000000096000004 [#1] SMP [ 48.177348] Modules linked in: q6prm_clocks q6apm_lpass_dais q6apm_dai snd_q6dsp_common q6prm snd_q6apm 8021q garp mrp stp llc snd_soc_hdmi_codec apr pdr_interface phy_qcom_edp fastrpc qcom_pd_mapper rpmsg_ctrl qrtr_smd rpmsg_char qcom_pdr_msg qcom_iris v4l2_mem2mem videobuf2_dma_contig ath11k_pci msm ubwc_config at24 ath11k videobuf2_memops mac80211 ocmem videobuf2_v4l2 libarc4 drm_gpuvm mhi qrtr videodev drm_exec snd_soc_sc8280xp gpu_sched videobuf2_common nvmem_qcom_spmi_sdam snd_soc_qcom_sdw drm_dp_aux_bus qcom_q6v5_pas qcom_spmi_temp_alarm snd_soc_qcom_common rtc_pm8xxx qcom_pon drm_display_helper cec qcom_pil_info qcom_stats soundwire_bus drm_client_lib mc dispcc0_sa8775p videocc_sa8775p qcom_q6v5 camcc_sa8775p snd_soc_dmic phy_qcom_sgmii_eth snd_soc_max98357a i2c_qcom_geni snd_soc_core dwmac_qcom_ethqos llcc_qcom icc_bwmon qcom_sysmon snd_compress qcom_refgen_regulator coresight_stm stmmac_platform snd_pcm_dmaengine qcom_common coresight_tmc stmmac coresight_replicator qcom_glink_smem coresight_cti stm_core [ 48.177444] coresight_funnel snd_pcm ufs_qcom phy_qcom_qmp_usb gpi phy_qcom_snps_femto_v2 coresight phy_qcom_qmp_ufs qcom_wdt gpucc_sa8775p pcs_xpcs mdt_loader qcom_ice icc_osm_l3 qmi_helpers snd_timer snd soundcore display_connector qcom_rng nvmem_reboot_mode drm_kms_helper phy_qcom_qmp_pcie sha256 cfg80211 rfkill socinfo fuse drm backlight ipv6 [ 48.301059] CPU: 2 UID: 0 PID: 293 Comm: kworker/u32:2 Not tainted 6.19.0-rc6-dirty #10 PREEMPT [ 48.310081] Hardware name: Qualcomm Technologies, Inc. Lemans EVK (DT) [ 48.316782] Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface] [ 48.323672] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 48.330825] pc : mutex_lock+0xc/0x54 [ 48.334514] lr : soc_dapm_shutdown_dapm+0x44/0x174 [snd_soc_core] [ 48.340794] sp : ffff800084ddb7b0 [ 48.344207] x29: ffff800084ddb7b0 x28: ffff00009cd9cf30 x27: ffff00009cd9cc00 [ 48.351544] x26: ffff000099610190 x25: ffffa31d2f19c810 x24: ffffa31d2f185098 [ 48.358869] x23: ffff800084ddb7f8 x22: 0000000000000000 x21: 00000000000000d0 [ 48.366198] x20: ffff00009ba6c338 x19: ffff00009ba6c338 x18: 00000000ffffffff [ 48.373528] x17: 000000040044ffff x16: ffffa31d4ae6dca8 x15: 072007740775076f [ 48.380853] x14: 0765076d07690774 x13: 00313a323a656369 x12: 767265733a637673 [ 48.388182] x11: 00000000000003f9 x10: ffffa31d4c7dea98 x9 : 0000000000000001 [ 48.395519] x8 : ffff00009a2aadc0 x7 : 0000000000000003 x6 : 0000000000000000 [ 48.402854] x5 : 0000000000000 ---truncated--- | |||||
| CVE-2026-43312 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov5647: Initialize subdev before controls In ov5647_init_controls() we call v4l2_get_subdevdata, but it is initialized by v4l2_i2c_subdev_init() in the probe, which currently happens after init_controls(). This can result in a segfault if the error condition is hit, and we try to access i2c_client, so fix the order. | |||||
| CVE-2026-43314 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dm: remove fake timeout to avoid leak request Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request"), drivers are responsible for calling blk_should_fake_timeout() at appropriate code paths and opportunities. However, the dm driver does not implement its own timeout handler and relies on the timeout handling of its slave devices. If an io-timeout-fail error is injected to a dm device, the request will be leaked and never completed, causing tasks to hang indefinitely. Reproduce: 1. prepare dm which has iscsi slave device 2. inject io-timeout-fail to dm echo 1 >/sys/class/block/dm-0/io-timeout-fail echo 100 >/sys/kernel/debug/fail_io_timeout/probability echo 10 >/sys/kernel/debug/fail_io_timeout/times 3. read/write dm 4. iscsiadm -m node -u Result: hang task like below [ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds. [ 862.244133] Tainted: G E 6.19.0-rc1+ #51 [ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000 [ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi] [ 862.245264] Call Trace: [ 862.245587] <TASK> [ 862.245814] __schedule+0x810/0x15c0 [ 862.246557] schedule+0x69/0x180 [ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120 [ 862.247688] elevator_change+0x16d/0x460 [ 862.247893] elevator_set_none+0x87/0xf0 [ 862.248798] blk_unregister_queue+0x12e/0x2a0 [ 862.248995] __del_gendisk+0x231/0x7e0 [ 862.250143] del_gendisk+0x12f/0x1d0 [ 862.250339] sd_remove+0x85/0x130 [sd_mod] [ 862.250650] device_release_driver_internal+0x36d/0x530 [ 862.250849] bus_remove_device+0x1dd/0x3f0 [ 862.251042] device_del+0x38a/0x930 [ 862.252095] __scsi_remove_device+0x293/0x360 [ 862.252291] scsi_remove_target+0x486/0x760 [ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi] [ 862.252886] process_one_work+0x633/0xe50 [ 862.253101] worker_thread+0x6df/0xf10 [ 862.253647] kthread+0x36d/0x720 [ 862.254533] ret_from_fork+0x2a6/0x470 [ 862.255852] ret_from_fork_asm+0x1a/0x30 [ 862.256037] </TASK> Remove the blk_should_fake_timeout() check from dm, as dm has no native timeout handling and should not attempt to fake timeouts. | |||||
| CVE-2026-43208 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net: do not pass flow_id to set_rps_cpu() Blamed commit made the assumption that the RPS table for each receive queue would have the same size, and that it would not change. Compute flow_id in set_rps_cpu(), do not assume we can use the value computed by get_rps_cpu(). Otherwise we risk out-of-bound access and/or crashes. | |||||
| CVE-2026-43256 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: qcom: camss: vfe: Fix out-of-bounds access in vfe_isr_reg_update() vfe_isr() iterates using MSM_VFE_IMAGE_MASTERS_NUM(7) as the loop bound and passes the index to vfe_isr_reg_update(). However, vfe->line[] array is defined with VFE_LINE_NUM_MAX(4): struct vfe_line line[VFE_LINE_NUM_MAX]; When index is 4, 5, 6, the access to vfe->line[line_id] exceeds the array bounds and resulting in out-of-bounds memory access. Fix this by using separate loops for output lines and write masters. | |||||
| CVE-2026-43435 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: fix oneway spam detection The spam detection logic in TreeRange was executed before the current request was inserted into the tree. So the new request was not being factored in the spam calculation. Fix this by moving the logic after the new range has been inserted. Also, the detection logic for ArrayRange was missing altogether which meant large spamming transactions could get away without being detected. Fix this by implementing an equivalent low_oneway_space() in ArrayRange. Note that I looked into centralizing this logic in RangeAllocator but iterating through 'state' and 'size' got a bit too complicated (for me) and I abandoned this effort. | |||||
| CVE-2026-43219 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: cpsw_new: Fix potential unregister of netdev that has not been registered yet If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly. | |||||
| CVE-2026-43445 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: e1000/e1000e: Fix leak in DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e driver") Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver") Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()") fixed the infinite loop, but introduced the off-by-one error. This issue may still exist in the igbvf driver, but I did not address it in this patch. | |||||