Total
403188 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-20055 | 2026-06-17 | N/A | 4.8 MEDIUM | ||
| Multiple vulnerabilities in the web-based management interface of Cisco Packaged Contact Center Enterprise (Packaged CCE) and Cisco Unified Contact Center Enterprise (Unified CCE) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. These vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have valid administrative credentials. | |||||
| CVE-2026-20051 | 2026-06-17 | N/A | 7.4 HIGH | ||
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop. This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device. Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. | |||||
| CVE-2026-20048 | 2026-06-17 | N/A | 7.7 HIGH | ||
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing when parsing SNMP requests. An attacker could exploit this vulnerability by continuously sending SNMP queries to a specific MIB of an affected device. A successful exploit could allow the attacker to cause a kernel panic on the device, resulting in a reload and a DoS condition. Note: This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv1 or SNMPv2c, the attacker must have a valid read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. | |||||
| CVE-2026-20047 | 1 Cisco | 1 Identity Services Engine | 2026-06-17 | N/A | 4.8 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface. This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. | |||||
| CVE-2026-20045 | 1 Cisco | 3 Unified Communications Manager, Unified Communications Manager Im And Presence Service, Unity Connection | 2026-06-17 | N/A | 8.2 HIGH |
| A vulnerability in Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unity Connection, and Cisco Webex Calling Dedicated Instance could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP requests. An attacker could exploit this vulnerability by sending a sequence of crafted HTTP requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. Note: Cisco has assigned this security advisory a Security Impact Rating (SIR) of Critical rather than High as the score indicates. The reason is that exploitation of this vulnerability could result in an attacker elevating privileges to root. | |||||
| CVE-2026-20041 | 2026-06-17 | N/A | 6.1 MEDIUM | ||
| A vulnerability in Cisco Nexus Dashboard and Cisco Nexus Dashboard Insights could allow an unauthenticated, remote attacker to conduct a server-side request forgery (SSRF) attack through an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by persuading an authenticated user of the device management interface to click a crafted link. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device to an attacker-controlled server. The attacker could then execute arbitrary script code in the context of the affected interface or access sensitive browser-based information. | |||||
| CVE-2026-20037 | 2026-06-17 | N/A | 4.4 MEDIUM | ||
| A vulnerability in the NX-OS CLI privilege levels of Cisco UCS Manager Software could allow an authenticated, local attacker with read-only privileges to modify files and perform unauthorized actions on an affected system. This vulnerability exists because unnecessary privileges are given to the user. An attacker could exploit this vulnerability by authenticating to a device as a read-only user and connecting to the NX-OS CLI. A successful exploit could allow the attacker to create or overwrite files in the file system or perform limited privileged actions on an affected device. | |||||
| CVE-2026-20036 | 2026-06-17 | N/A | 6.5 MEDIUM | ||
| A vulnerability in the CLI and web-based management interface of Cisco UCS Manager Software could allow an authenticated, remote attacker with valid administrative privileges to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation of command arguments that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of an affected device with root-level privileges. | |||||
| CVE-2026-20033 | 2026-06-17 | N/A | 7.4 HIGH | ||
| A vulnerability in Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation when processing specific Ethernet frames. An attacker could exploit this vulnerability by sending a crafted Ethernet frame to the management interface of an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. Note: Only the out-of-band (OOB) management interface is affected. | |||||
| CVE-2026-20031 | 2026-06-17 | N/A | 5.3 MEDIUM | ||
| A vulnerability in the HTML Cascading Style Sheets (CSS) module of ClamAV could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error handling when splitting UTF-8 strings. An attacker could exploit this vulnerability by submitting a crafted HTML file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to terminate the scanning process. | |||||
| CVE-2026-20029 | 2026-06-17 | N/A | 4.9 MEDIUM | ||
| A vulnerability in the licensing features of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker with administrative privileges to gain access to sensitive information. This vulnerability is due to improper parsing of XML that is processed by the web-based management interface of Cisco ISE and Cisco ISE-PIC. An attacker could exploit this vulnerability by uploading a malicious file to the application. A successful exploit could allow the attacker to read arbitrary files from the underlying operating system that could include sensitive data that should otherwise be inaccessible even to administrators. To exploit this vulnerability, the attacker must have valid administrative credentials. | |||||
| CVE-2026-20027 | 2026-06-17 | N/A | 5.3 MEDIUM | ||
| Multiple Cisco products are affected by a vulnerability in the processing of DCE/RPC requests that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to leak sensitive information or to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in buffer handling logic when processing DCE/RPC requests, which can result in a buffer out-of-bounds read. An attacker could exploit this vulnerability by sending a large number of DCE/RPC requests through an established connection that is inspected by Snort 3. A successful exploit could allow the attacker to obtain sensitive information in the Snort 3 data stream. | |||||
| CVE-2026-20026 | 2026-06-17 | N/A | 5.8 MEDIUM | ||
| Multiple Cisco products are affected by a vulnerability in the processing of DCE/RPC requests that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to leak sensitive information or to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in buffer handling logic when processing DCE/RPC requests, which can result in a buffer use-after-free read. An attacker could exploit this vulnerability by sending a large number of DCE/RPC requests through an established connection that is inspected by Snort 3. A successful exploit could allow the attacker to unexpectedly restart the Snort 3 Detection Engine, which could cause a denial of service (DoS). | |||||
| CVE-2026-20018 | 2026-06-17 | N/A | 5.9 MEDIUM | ||
| A vulnerability in the sftunnel functionality of Cisco Secure Firewall Management Center (FMC) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker with administrative privileges to write arbitrary files as root on the underlying operating system. This vulnerability is due to insufficient validation of the directory path during file synchronization. An attacker could exploit this vulnerability by crafting a directory path outside of the expected file location. A successful exploit could allow the attacker to create or replace any file on the underlying operating system. | |||||
| CVE-2026-20010 | 2026-06-17 | N/A | 7.4 HIGH | ||
| A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the LLDP process to restart, which could cause an affected device to reload unexpectedly. This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol). | |||||
| CVE-2026-20009 | 1 Cisco | 1 Adaptive Security Appliance Software | 2026-06-17 | N/A | 5.3 MEDIUM |
| A vulnerability in the implementation of the proprietary SSH stack with SSH key-based authentication in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to log in to a Cisco Secure Firewall ASA device and execute commands as a specific user. This vulnerability is due to insufficient validation of user input during the SSH authentication phase. An attacker could exploit this vulnerability by submitting crafted input during SSH authentication to an affected device. A successful exploit could allow the attacker to log in to the device as a specific user without the private SSH key of that user. To exploit this vulnerability, the attacker must possess a valid username and the associated public key. The private key is not required. Notes: Exploitation of this vulnerability does not provide the attacker with root access. The authentication, authorization, and accounting (AAA) configuration command auto-enable is not affected by this vulnerability. | |||||
| CVE-2026-20001 | 2026-06-17 | N/A | 6.5 MEDIUM | ||
| A vulnerability in the REST API of Cisco Secure FMC Software could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. This vulnerability is due to inadequate validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted requests to an affected device. A successful exploit could allow the attacker to obtain read access to the database and read certain files on the underlying operating system. To exploit this vulnerability, the attacker would need valid user credentials with any of the following roles: Administrator Security approver Access admin Network admin | |||||
| CVE-2026-1999 | 1 Github | 1 Enterprise Server | 2026-06-17 | N/A | 6.5 MEDIUM |
| An incorrect authorization vulnerability was identified in GitHub Enterprise Server that allowed an attacker to merge their own pull request into a repository without having push access by exploiting an authorization bypass in the enable_auto_merge mutation for pull requests. This issue only affected repositories that allow forking as the attack relies on opening a pull request from an attacker-controlled fork into the target repository. Exploitation was only possible in specific scenarios. It required a clean pull request status and only applied to branches without branch protection rules enabled. This vulnerability affected GitHub Enterprise Server versions prior to 3.19.2, 3.18.5, and 3.17.11, and was fixed in versions 3.19.2, 3.18.5, and 3.17.11. This vulnerability was reported via the GitHub Bug Bounty program. | |||||
| CVE-2026-1998 | 1 Micropython | 1 Micropython | 2026-06-17 | 1.7 LOW | 3.3 LOW |
| A flaw has been found in micropython up to 1.27.0. This vulnerability affects the function mp_import_all of the file py/runtime.c. This manipulation causes memory corruption. The attack needs to be launched locally. The exploit has been published and may be used. Patch name: 570744d06c5ba9dba59b4c3f432ca4f0abd396b6. It is suggested to install a patch to address this issue. | |||||
| CVE-2026-1997 | 1 Hp | 82 D9l18a, D9l18a Firmware, D9l20a and 79 more | 2026-06-17 | N/A | 5.3 MEDIUM |
| Certain HP OfficeJet Pro printers may expose information if Cross‑Origin Resource Sharing (CORS) is misconfigured, potentially allowing unauthorized web origins to access device resource. CORS is disabled by default on Pro‑class devices and can only be enabled by an administrator through the Embedded Web Server (EWS). Keeping CORS disabled unless explicitly required helps ensure that only trusted solutions can interact with the device. | |||||