Filtered by vendor Linux
Subscribe
Total
19344 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-23138 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: watch_queue: fix pipe accounting mismatch Currently, watch_queue_set_size() modifies the pipe buffers charged to user->pipe_bufs without updating the pipe->nr_accounted on the pipe itself, due to the if (!pipe_has_watch_queue()) test in pipe_resize_ring(). This means that when the pipe is ultimately freed, we decrement user->pipe_bufs by something other than what than we had charged to it, potentially leading to an underflow. This in turn can cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM. To remedy this, explicitly account for the pipe usage in watch_queue_set_size() to match the number set via account_pipe_buffers() (It's unclear why watch_queue_set_size() does not update nr_accounted; it may be due to intentional overprovisioning in watch_queue_set_size()?) | |||||
| CVE-2025-23137 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq/amd-pstate: Add missing NULL ptr check in amd_pstate_update Check if policy is NULL before dereferencing it in amd_pstate_update. | |||||
| CVE-2025-23135 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Teardown riscv specific bits after kvm_exit During a module removal, kvm_exit invokes arch specific disable call which disables AIA. However, we invoke aia_exit before kvm_exit resulting in the following warning. KVM kernel module can't be inserted afterwards due to inconsistent state of IRQ. [25469.031389] percpu IRQ 31 still enabled on CPU0! [25469.031732] WARNING: CPU: 3 PID: 943 at kernel/irq/manage.c:2476 __free_percpu_irq+0xa2/0x150 [25469.031804] Modules linked in: kvm(-) [25469.031848] CPU: 3 UID: 0 PID: 943 Comm: rmmod Not tainted 6.14.0-rc5-06947-g91c763118f47-dirty #2 [25469.031905] Hardware name: riscv-virtio,qemu (DT) [25469.031928] epc : __free_percpu_irq+0xa2/0x150 [25469.031976] ra : __free_percpu_irq+0xa2/0x150 [25469.032197] epc : ffffffff8007db1e ra : ffffffff8007db1e sp : ff2000000088bd50 [25469.032241] gp : ffffffff8131cef8 tp : ff60000080b96400 t0 : ff2000000088baf8 [25469.032285] t1 : fffffffffffffffc t2 : 5249207570637265 s0 : ff2000000088bd90 [25469.032329] s1 : ff60000098b21080 a0 : 037d527a15eb4f00 a1 : 037d527a15eb4f00 [25469.032372] a2 : 0000000000000023 a3 : 0000000000000001 a4 : ffffffff8122dbf8 [25469.032410] a5 : 0000000000000fff a6 : 0000000000000000 a7 : ffffffff8122dc10 [25469.032448] s2 : ff60000080c22eb0 s3 : 0000000200000022 s4 : 000000000000001f [25469.032488] s5 : ff60000080c22e00 s6 : ffffffff80c351c0 s7 : 0000000000000000 [25469.032582] s8 : 0000000000000003 s9 : 000055556b7fb490 s10: 00007ffff0e12fa0 [25469.032621] s11: 00007ffff0e13e9a t3 : ffffffff81354ac7 t4 : ffffffff81354ac7 [25469.032664] t5 : ffffffff81354ac8 t6 : ffffffff81354ac7 [25469.032698] status: 0000000200000100 badaddr: ffffffff8007db1e cause: 0000000000000003 [25469.032738] [<ffffffff8007db1e>] __free_percpu_irq+0xa2/0x150 [25469.032797] [<ffffffff8007dbfc>] free_percpu_irq+0x30/0x5e [25469.032856] [<ffffffff013a57dc>] kvm_riscv_aia_exit+0x40/0x42 [kvm] [25469.033947] [<ffffffff013b4e82>] cleanup_module+0x10/0x32 [kvm] [25469.035300] [<ffffffff8009b150>] __riscv_sys_delete_module+0x18e/0x1fc [25469.035374] [<ffffffff8000c1ca>] syscall_handler+0x3a/0x46 [25469.035456] [<ffffffff809ec9a4>] do_trap_ecall_u+0x72/0x134 [25469.035536] [<ffffffff809f5e18>] handle_exception+0x148/0x156 Invoke aia_exit and other arch specific cleanup functions after kvm_exit so that disable gets a chance to be called first before exit. | |||||
| CVE-2025-23134 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Don't take register_mutex with copy_from/to_user() The infamous mmap_lock taken in copy_from/to_user() can be often problematic when it's called inside another mutex, as they might lead to deadlocks. In the case of ALSA timer code, the bad pattern is with guard(mutex)(®ister_mutex) that covers copy_from/to_user() -- which was mistakenly introduced at converting to guard(), and it had been carefully worked around in the past. This patch fixes those pieces simply by moving copy_from/to_user() out of the register mutex lock again. | |||||
| CVE-2025-23130 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid panic once fallocation fails for pinfile syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2746! CPU: 0 UID: 0 PID: 5323 Comm: syz.0.0 Not tainted 6.13.0-rc2-syzkaller-00018-g7cb1b4663150 #0 RIP: 0010:get_new_segment fs/f2fs/segment.c:2746 [inline] RIP: 0010:new_curseg+0x1f52/0x1f70 fs/f2fs/segment.c:2876 Call Trace: <TASK> __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3210 f2fs_allocate_new_section fs/f2fs/segment.c:3224 [inline] f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3238 f2fs_expand_inode_data+0x696/0xca0 fs/f2fs/file.c:1830 f2fs_fallocate+0x537/0xa10 fs/f2fs/file.c:1940 vfs_fallocate+0x569/0x6e0 fs/open.c:327 do_vfs_ioctl+0x258c/0x2e40 fs/ioctl.c:885 __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x80/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Concurrent pinfile allocation may run out of free section, result in panic in get_new_segment(), let's expand pin_sem lock coverage to include f2fs_gc(), so that we can make sure to reclaim enough free space for following allocation. In addition, do below changes to enhance error path handling: - call f2fs_bug_on() only in non-pinfile allocation path in get_new_segment(). - call reset_curseg_fields() to reset all fields of curseg in new_curseg() | |||||
| CVE-2025-22128 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in error path If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath12k_pci_msi_alloc(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This may end up with a warning from the IRQ core that is expecting the affinity hint to be cleared before freeing the IRQ: kernel/irq/manage.c: /* make sure affinity_hint is cleaned up */ if (WARN_ON_ONCE(desc->affinity_hint)) desc->affinity_hint = NULL; So to fix this issue, clear the IRQ affinity hint before calling ath12k_pci_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. | |||||
| CVE-2025-22126 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: md: fix mddev uaf while iterating all_mddevs list While iterating all_mddevs list from md_notify_reboot() and md_exit(), list_for_each_entry_safe is used, and this can race with deletint the next mddev, causing UAF: t1: spin_lock //list_for_each_entry_safe(mddev, n, ...) mddev_get(mddev1) // assume mddev2 is the next entry spin_unlock t2: //remove mddev2 ... mddev_free spin_lock list_del spin_unlock kfree(mddev2) mddev_put(mddev1) spin_lock //continue dereference mddev2->all_mddevs The old helper for_each_mddev() actually grab the reference of mddev2 while holding the lock, to prevent from being freed. This problem can be fixed the same way, however, the code will be complex. Hence switch to use list_for_each_entry, in this case mddev_put() can free the mddev1 and it's not safe as well. Refer to md_seq_show(), also factor out a helper mddev_put_locked() to fix this problem. | |||||
| CVE-2025-22125 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: don't ignore IO flags If blk-wbt is enabled by default, it's found that raid write performance is quite bad because all IO are throttled by wbt of underlying disks, due to flag REQ_IDLE is ignored. And turns out this behaviour exist since blk-wbt is introduced. Other than REQ_IDLE, other flags should not be ignored as well, for example REQ_META can be set for filesystems, clearing it can cause priority reverse problems; And REQ_NOWAIT should not be cleared as well, because io will wait instead of failing directly in underlying disks. Fix those problems by keep IO flags from master bio. Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT") | |||||
| CVE-2025-22123 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid accessing uninitialized curseg syzbot reports a f2fs bug as below: F2FS-fs (loop3): Stopped filesystem due to reason: 7 kworker/u8:7: attempt to access beyond end of device BUG: unable to handle page fault for address: ffffed1604ea3dfa RIP: 0010:get_ckpt_valid_blocks fs/f2fs/segment.h:361 [inline] RIP: 0010:has_curseg_enough_space fs/f2fs/segment.h:570 [inline] RIP: 0010:__get_secs_required fs/f2fs/segment.h:620 [inline] RIP: 0010:has_not_enough_free_secs fs/f2fs/segment.h:633 [inline] RIP: 0010:has_enough_free_secs+0x575/0x1660 fs/f2fs/segment.h:649 <TASK> f2fs_is_checkpoint_ready fs/f2fs/segment.h:671 [inline] f2fs_write_inode+0x425/0x540 fs/f2fs/inode.c:791 write_inode fs/fs-writeback.c:1525 [inline] __writeback_single_inode+0x708/0x10d0 fs/fs-writeback.c:1745 writeback_sb_inodes+0x820/0x1360 fs/fs-writeback.c:1976 wb_writeback+0x413/0xb80 fs/fs-writeback.c:2156 wb_do_writeback fs/fs-writeback.c:2303 [inline] wb_workfn+0x410/0x1080 fs/fs-writeback.c:2343 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x7a9/0x920 kernel/kthread.c:464 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Commit 8b10d3653735 ("f2fs: introduce FAULT_NO_SEGMENT") allows to trigger no free segment fault in allocator, then it will update curseg->segno to NULL_SEGNO, though, CP_ERROR_FLAG has been set, f2fs_write_inode() missed to check the flag, and access invalid curseg->segno directly in below call path, then resulting in panic: - f2fs_write_inode - f2fs_is_checkpoint_ready - has_enough_free_secs - has_not_enough_free_secs - __get_secs_required - has_curseg_enough_space - get_ckpt_valid_blocks : access invalid curseg->segno To avoid this issue, let's: - check CP_ERROR_FLAG flag in prior to f2fs_is_checkpoint_ready() in f2fs_write_inode(). - in has_curseg_enough_space(), save curseg->segno into a temp variable, and verify its validation before use. | |||||
| CVE-2025-22122 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: block: fix adding folio to bio >4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage is supported, then 'offset' of folio can't be held in 'unsigned int', cause warning in bio_add_folio_nofail() and IO failure. Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't be overflow, and folio can be added to bio successfully. | |||||
| CVE-2025-22120 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: goto right label 'out_mmap_sem' in ext4_setattr() Otherwise, if ext4_inode_attach_jinode() fails, a hung task will happen because filemap_invalidate_unlock() isn't called to unlock mapping->invalidate_lock. Like this: EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory INFO: task fsstress:374 blocked for more than 122 seconds. Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373 task_flags:0x440140 flags:0x00000000 Call Trace: <TASK> __schedule+0x2c9/0x7f0 schedule+0x27/0xa0 schedule_preempt_disabled+0x15/0x30 rwsem_down_read_slowpath+0x278/0x4c0 down_read+0x59/0xb0 page_cache_ra_unbounded+0x65/0x1b0 filemap_get_pages+0x124/0x3e0 filemap_read+0x114/0x3d0 vfs_read+0x297/0x360 ksys_read+0x6c/0xe0 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2025-22119 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: init wiphy_work before allocating rfkill fails syzbort reported a uninitialize wiphy_work_lock in cfg80211_dev_free. [1] After rfkill allocation fails, the wiphy release process will be performed, which will cause cfg80211_dev_free to access the uninitialized wiphy_work related data. Move the initialization of wiphy_work to before rfkill initialization to avoid this issue. [1] INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 UID: 0 PID: 5935 Comm: syz-executor550 Not tainted 6.14.0-rc6-syzkaller-00103-g4003c9e78778 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 assign_lock_key kernel/locking/lockdep.c:983 [inline] register_lock_class+0xc39/0x1240 kernel/locking/lockdep.c:1297 __lock_acquire+0x135/0x3c40 kernel/locking/lockdep.c:5103 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162 cfg80211_dev_free+0x30/0x3d0 net/wireless/core.c:1196 device_release+0xa1/0x240 drivers/base/core.c:2568 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1e4/0x5a0 lib/kobject.c:737 put_device+0x1f/0x30 drivers/base/core.c:3774 wiphy_free net/wireless/core.c:1224 [inline] wiphy_new_nm+0x1c1f/0x2160 net/wireless/core.c:562 ieee80211_alloc_hw_nm+0x1b7a/0x2260 net/mac80211/main.c:835 mac80211_hwsim_new_radio+0x1d6/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5185 hwsim_new_radio_nl+0xb42/0x12b0 drivers/net/wireless/virtual/mac80211_hwsim.c:6242 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2533 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1882 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg net/socket.c:733 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2627 __sys_sendmsg+0x16e/0x220 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Close: https://syzkaller.appspot.com/bug?extid=aaf0488c83d1d5f4f029 | |||||
| CVE-2025-22116 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: idpf: check error for register_netdev() on init Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [ 3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [ 3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability. | |||||
| CVE-2025-22113 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi->s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here. | |||||
| CVE-2025-22112 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: fix out-of-range access of vnic_info array The bnxt_queue_{start | stop}() access vnic_info as much as allocated, which indicates bp->nr_vnics. So, it should not reach bp->vnic_info[bp->nr_vnics]. | |||||
| CVE-2025-22106 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vmxnet3: unregister xdp rxq info in the reset path vmxnet3 does not unregister xdp rxq info in the vmxnet3_reset_work() code path as vmxnet3_rq_destroy() is not invoked in this code path. So, we get below message with a backtrace. Missing unregister, handled but fix driver WARNING: CPU:48 PID: 500 at net/core/xdp.c:182 __xdp_rxq_info_reg+0x93/0xf0 This patch fixes the problem by moving the unregister code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup(). | |||||
| CVE-2025-22105 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bonding: check xdp prog when set bond mode Following operations can trigger a warning[1]: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode balance-rr ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp ip netns exec ns1 ip link set bond0 type bond mode broadcast ip netns del ns1 When delete the namespace, dev_xdp_uninstall() is called to remove xdp program on bond dev, and bond_xdp_set() will check the bond mode. If bond mode is changed after attaching xdp program, the warning may occur. Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode with xdp program attached is not good. Add check for xdp program when set bond mode. [1] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930 Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ... RSP: 0018:ffffc90000063d80 EFLAGS: 00000282 RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48 RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8 R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000 FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0 Call Trace: <TASK> ? __warn+0x83/0x130 ? unregister_netdevice_many_notify+0x8d9/0x930 ? report_bug+0x18e/0x1a0 ? handle_bug+0x54/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? unregister_netdevice_many_notify+0x8d9/0x930 ? bond_net_exit_batch_rtnl+0x5c/0x90 cleanup_net+0x237/0x3d0 process_one_work+0x163/0x390 worker_thread+0x293/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0xec/0x1e0 ? __pfx_kthread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2025-22099 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm: xlnx: zynqmp_dpsub: Add NULL check in zynqmp_audio_init devm_kasprintf() calls can return null pointers on failure. But some return values were not checked in zynqmp_audio_init(). Add NULL check in zynqmp_audio_init(), avoid referencing null pointers in the subsequent code. | |||||
| CVE-2025-22098 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dp: Fix a deadlock in zynqmp_dp_ignore_hpd_set() Instead of attempting the same mutex twice, lock and unlock it. This bug has been detected by the Clang thread-safety analyzer. | |||||
| CVE-2025-22097 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix use after free and double free on init error If the driver initialization fails, the vkms_exit() function might access an uninitialized or freed default_config pointer and it might double free it. Fix both possible errors by initializing default_config only when the driver initialization succeeded. | |||||