Total
404335 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-31491 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Harden depth calculation functions An issue was exposed where OS can pass in U32_MAX for SQ/RQ/SRQ size. This can cause integer overflow and truncation of SQ/RQ/SRQ depth returning a success when it should have failed. Harden the functions to do all depth calculations and boundary checking in u64 sizes. | |||||
| CVE-2026-31490 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix use-after-free in migration restore When an error is returned from xe_sriov_pf_migration_restore_produce(), the data pointer is not set to NULL, which can trigger use-after-free in subsequent .write() calls. Set the pointer to NULL upon error to fix the problem. (cherry picked from commit 4f53d8c6d23527d734fe3531d08e15cb170a0819) | |||||
| CVE-2026-31487 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Also note that we do not enable the driver_override feature of struct bus_type, as SPI - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n". | |||||
| CVE-2026-31484 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/fdinfo: fix OOB read in SQE_MIXED wrap check __io_uring_show_fdinfo() iterates over pending SQEs and, for 128-byte SQEs on an IORING_SETUP_SQE_MIXED ring, needs to detect when the second half of the SQE would be past the end of the sq_sqes array. The current check tests (++sq_head & sq_mask) == 0, but sq_head is only incremented when a 128-byte SQE is encountered, not on every iteration. The actual array index is sq_idx = (i + sq_head) & sq_mask, which can be sq_mask (the last slot) while the wrap check passes. Fix by checking sq_idx directly. Keep the sq_head increment so the loop still skips the second half of the 128-byte SQE on the next iteration. | |||||
| CVE-2026-31483 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/syscalls: Add spectre boundary for syscall dispatch table The s390 syscall number is directly controlled by userspace, but does not have an array_index_nospec() boundary to prevent access past the syscall function pointer tables. | |||||
| CVE-2026-31482 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/entry: Scrub r12 register on kernel entry Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"), all entry handlers loaded r12 with the current task pointer (lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That commit removed TIF_ISOLATE_BP, dropping both the branch prediction macros and the r12 load, but did not add r12 to the register clearing sequence. Add the missing xgr %r12,%r12 to make the register scrub consistent across all entry points. | |||||
| CVE-2026-31481 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Drain deferred trigger frees if kthread creation fails Boot-time trigger registration can fail before the trigger-data cleanup kthread exists. Deferring those frees until late init is fine, but the post-boot fallback must still drain the deferred list if kthread creation never succeeds. Otherwise, boot-deferred nodes can accumulate on trigger_data_free_list, later frees fall back to synchronously freeing only the current object, and the older queued entries are leaked forever. To trigger this, add the following to the kernel command line: trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon The second traceon trigger will fail and be freed. This triggers a NULL pointer dereference and crashes the kernel. Keep the deferred boot-time behavior, but when kthread creation fails, drain the whole queued list synchronously. Do the same in the late-init drain path so queued entries are not stranded there either. | |||||
| CVE-2026-31480 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential deadlock in cpu hotplug with osnoise The following sequence may leads deadlock in cpu hotplug: task1 task2 task3 ----- ----- ----- mutex_lock(&interface_lock) [CPU GOING OFFLINE] cpus_write_lock(); osnoise_cpu_die(); kthread_stop(task3); wait_for_completion(); osnoise_sleep(); mutex_lock(&interface_lock); cpus_read_lock(); [DEAD LOCK] Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock). | |||||
| CVE-2026-31479 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: always keep track of remap prev/next During 3D workload, user is reporting hitting: [ 413.361679] WARNING: drivers/gpu/drm/xe/xe_vm.c:1217 at vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe], CPU#7: vkd3d_queue/9925 [ 413.361944] CPU: 7 UID: 1000 PID: 9925 Comm: vkd3d_queue Kdump: loaded Not tainted 7.0.0-070000rc3-generic #202603090038 PREEMPT(lazy) [ 413.361949] RIP: 0010:vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe] [ 413.362074] RSP: 0018:ffffd4c25c3df930 EFLAGS: 00010282 [ 413.362077] RAX: 0000000000000000 RBX: ffff8f3ee817ed10 RCX: 0000000000000000 [ 413.362078] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 413.362079] RBP: ffffd4c25c3df980 R08: 0000000000000000 R09: 0000000000000000 [ 413.362081] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f41fbf99380 [ 413.362082] R13: ffff8f3ee817e968 R14: 00000000ffffffef R15: ffff8f43d00bd380 [ 413.362083] FS: 00000001040ff6c0(0000) GS:ffff8f4696d89000(0000) knlGS:00000000330b0000 [ 413.362085] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 413.362086] CR2: 00007ddfc4747000 CR3: 00000002e6262005 CR4: 0000000000f72ef0 [ 413.362088] PKRU: 55555554 [ 413.362089] Call Trace: [ 413.362092] <TASK> [ 413.362096] xe_vm_bind_ioctl+0xa9a/0xc60 [xe] Which seems to hint that the vma we are re-inserting for the ops unwind is either invalid or overlapping with something already inserted in the vm. It shouldn't be invalid since this is a re-insertion, so must have worked before. Leaving the likely culprit as something already placed where we want to insert the vma. Following from that, for the case where we do something like a rebind in the middle of a vma, and one or both mapped ends are already compatible, we skip doing the rebind of those vma and set next/prev to NULL. As well as then adjust the original unmap va range, to avoid unmapping the ends. However, if we trigger the unwind path, we end up with three va, with the two ends never being removed and the original va range in the middle still being the shrunken size. If this occurs, one failure mode is when another unwind op needs to interact with that range, which can happen with a vector of binds. For example, if we need to re-insert something in place of the original va. In this case the va is still the shrunken version, so when removing it and then doing a re-insert it can overlap with the ends, which were never removed, triggering a warning like above, plus leaving the vm in a bad state. With that, we need two things here: 1) Stop nuking the prev/next tracking for the skip cases. Instead relying on checking for skip prev/next, where needed. That way on the unwind path, we now correctly remove both ends. 2) Undo the unmap va shrinkage, on the unwind path. With the two ends now removed the unmap va should expand back to the original size again, before re-insertion. v2: - Update the explanation in the commit message, based on an actual IGT of triggering this issue, rather than conjecture. - Also undo the unmap shrinkage, for the skip case. With the two ends now removed, the original unmap va range should expand back to the original range. v3: - Track the old start/range separately. vma_size/start() uses the va info directly. (cherry picked from commit aec6969f75afbf4e01fd5fb5850ed3e9c27043ac) | |||||
| CVE-2026-31478 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len() After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"), response buffer management was changed to use dynamic iov array. In the new design, smb2_calc_max_out_buf_len() expects the second argument (hdr2_len) to be the offset of ->Buffer field in the response structure, not a hardcoded magic number. Fix the remaining call sites to use the correct offsetof() value. | |||||
| CVE-2026-31477 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memory leaks and NULL deref in smb2_lock() smb2_lock() has three error handling issues after list_del() detaches smb_lock from lock_list at no_check_cl: 1) If vfs_lock_file() returns an unexpected error in the non-UNLOCK path, goto out leaks smb_lock and its flock because the out: handler only iterates lock_list and rollback_list, neither of which contains the detached smb_lock. 2) If vfs_lock_file() returns -ENOENT in the UNLOCK path, goto out leaks smb_lock and flock for the same reason. The error code returned to the dispatcher is also stale. 3) In the rollback path, smb_flock_init() can return NULL on allocation failure. The result is dereferenced unconditionally, causing a kernel NULL pointer dereference. Add a NULL check to prevent the crash and clean up the bookkeeping; the VFS lock itself cannot be rolled back without the allocation and will be released at file or connection teardown. Fix cases 1 and 2 by hoisting the locks_free_lock()/kfree() to before the if(!rc) check in the UNLOCK branch so all exit paths share one free site, and by freeing smb_lock and flock before goto out in the non-UNLOCK branch. Propagate the correct error code in both cases. Fix case 3 by wrapping the VFS unlock in an if(rlock) guard and adding a NULL check for locks_free_lock(rlock) in the shared cleanup. Found via call-graph analysis using sqry. | |||||
| CVE-2026-31476 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 8.2 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: do not expire session on binding failure When a multichannel session binding request fails (e.g. wrong password), the error path unconditionally sets sess->state = SMB2_SESSION_EXPIRED. However, during binding, sess points to the target session looked up via ksmbd_session_lookup_slowpath() -- which belongs to another connection's user. This allows a remote attacker to invalidate any active session by simply sending a binding request with a wrong password (DoS). Fix this by skipping session expiration when the failed request was a binding attempt, since the session does not belong to the current connection. The reference taken by ksmbd_session_lookup_slowpath() is still correctly released via ksmbd_user_session_put(). | |||||
| CVE-2026-31475 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sma1307: fix double free of devm_kzalloc() memory A previous change added NULL checks and cleanup for allocation failures in sma1307_setting_loaded(). However, the cleanup for mode_set entries is wrong. Those entries are allocated with devm_kzalloc(), so they are device-managed resources and must not be freed with kfree(). Manually freeing them in the error path can lead to a double free when devres later releases the same memory. Drop the manual kfree() loop and let devres handle the cleanup. | |||||
| CVE-2026-31473 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices. | |||||
| CVE-2026-31472 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: validate inner IPv4 header length in IPTFS payload Add validation of the inner IPv4 packet tot_len and ihl fields parsed from decrypted IPTFS payloads in __input_process_payload(). A crafted ESP packet containing an inner IPv4 header with tot_len=0 causes an infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the data offset never advances and the while(data < tail) loop never terminates, spinning forever in softirq context. Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct iphdr), which catches both the tot_len=0 case and malformed ihl values. The normal IP stack performs this validation in ip_rcv_core(), but IPTFS extracts and processes inner packets before they reach that layer. | |||||
| CVE-2026-31471 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: only publish mode_data after clone setup iptfs_clone_state() stores x->mode_data before allocating the reorder window. If that allocation fails, the code frees the cloned state and returns -ENOMEM, leaving x->mode_data pointing at freed memory. The xfrm clone unwind later runs destroy_state() through x->mode_data, so the failed clone path tears down IPTFS state that clone_state() already freed. Keep the cloned IPTFS state private until all allocations succeed so failed clones leave x->mode_data unset. The destroy path already handles a NULL mode_data pointer. | |||||
| CVE-2026-31470 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: virt: tdx-guest: Fix handling of host controlled 'quote' buffer length Validate host controlled value `quote_buf->out_len` that determines how many bytes of the quote are copied out to guest userspace. In TDX environments with remote attestation, quotes are not considered private, and can be forwarded to an attestation server. Catch scenarios where the host specifies a response length larger than the guest's allocation, or otherwise races modifying the response while the guest consumes it. This prevents contents beyond the pages allocated for `quote_buf` (up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace, and possibly forwarded in attestation requests. Recall that some deployments want per-container configs-tsm-report interfaces, so the leak may cross container protection boundaries, not just local root. | |||||
| CVE-2026-31468 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Fix double free in dma-buf feature The error path through vfio_pci_core_feature_dma_buf() ignores its own advice to only use dma_buf_put() after dma_buf_export(), instead falling through the entire unwind chain. In the unlikely event that we encounter file descriptor exhaustion, this can result in an unbalanced refcount on the vfio device and double free of allocated objects. Avoid this by moving the "put" directly into the error path and return the errno rather than entering the unwind chain. | |||||
| CVE-2026-31467 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: erofs: add GFP_NOIO in the bio completion if needed The bio completion path in the process context (e.g. dm-verity) will directly call into decompression rather than trigger another workqueue context for minimal scheduling latencies, which can then call vm_map_ram() with GFP_KERNEL. Due to insufficient memory, vm_map_ram() may generate memory swapping I/O, which can cause submit_bio_wait to deadlock in some scenarios. Trimmed down the call stack, as follows: f2fs_submit_read_io submit_bio //bio_list is initialized. mmc_blk_mq_recovery z_erofs_endio vm_map_ram __pte_alloc_kernel __alloc_pages_direct_reclaim shrink_folio_list __swap_writepage submit_bio_wait //bio_list is non-NULL, hang!!! Use memalloc_noio_{save,restore}() to wrap up this path. | |||||
| CVE-2026-31465 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: writeback: don't block sync for filesystems with no data integrity guarantees Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot guarantee data persistence on sync (eg fuse). For superblocks with this flag set, sync kicks off writeback of dirty inodes but does not wait for the flusher threads to complete the writeback. This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in commit f9a49aa302a0 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings in wait_sb_inodes()"). The flag belongs at the superblock level because data integrity is a filesystem-wide property, not a per-inode one. Having this flag at the superblock level also allows us to skip having to iterate every dirty inode in wait_sb_inodes() only to skip each inode individually. Prior to this commit, mappings with no data integrity guarantees skipped waiting on writeback completion but still waited on the flusher threads to finish initiating the writeback. Waiting on the flusher threads is unnecessary. This commit kicks off writeback but does not wait on the flusher threads. This change properly addresses a recent report [1] for a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting on the flusher threads to finish: Workqueue: pm_fs_sync pm_fs_sync_work_fn Call Trace: <TASK> __schedule+0x457/0x1720 schedule+0x27/0xd0 wb_wait_for_completion+0x97/0xe0 sync_inodes_sb+0xf8/0x2e0 __iterate_supers+0xdc/0x160 ksys_sync+0x43/0xb0 pm_fs_sync_work_fn+0x17/0xa0 process_one_work+0x193/0x350 worker_thread+0x1a1/0x310 kthread+0xfc/0x240 ret_from_fork+0x243/0x280 ret_from_fork_asm+0x1a/0x30 </TASK> On fuse this is problematic because there are paths that may cause the flusher thread to block (eg if systemd freezes the user session cgroups first, which freezes the fuse daemon, before invoking the kernel suspend. The kernel suspend triggers ->write_node() which on fuse issues a synchronous setattr request, which cannot be processed since the daemon is frozen. Or if the daemon is buggy and cannot properly complete writeback, initiating writeback on a dirty folio already under writeback leads to writeback_get_folio() -> folio_prepare_writeback() -> unconditional wait on writeback to finish, which will cause a hang). This commit restores fuse to its prior behavior before tmp folios were removed, where sync was essentially a no-op. [1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1 | |||||