Filtered by vendor Zephyrproject
Subscribe
Total
194 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-2411 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | N/A | 6.5 MEDIUM |
| Zephyr's Bluetooth host declares a GATT characteristic as two consecutive attributes: a Characteristic Declaration whose permission is hard-coded to BT_GATT_PERM_READ, and a Characteristic Value attribute that carries the application-specified security permissions (e.g. BT_GATT_PERM_READ_ENCRYPT / READ_AUTHEN / READ_LESC). The public notify and indicate APIs explicitly accept either attribute, and passing the declaration is the documented, common idiom. Before sending each notification or indication, the host re-checks link security with bt_gatt_check_perm() against params->attr in gatt_notify(), gatt_indicate(), and gatt_notify_multiple_verify_params() (subsys/bluetooth/host/gatt.c). When the application passed the Characteristic Declaration attribute, the host correctly redirected the value handle but left params->attr pointing at the declaration, so the security check evaluated the declaration's permissions (no security required) instead of the value's. As a result the encryption/authentication/LESC requirement configured on the characteristic value was skipped. The Notify-Multiple path additionally used a mask that omitted the LE Secure Connections requirement. A remote peer triggers the disclosure by connecting (optionally without pairing or encryption) and writing the Client Characteristic Configuration descriptor to enable notifications or indications, causing the server to emit the protected value over a link that has not reached the required security level. The impact is information disclosure / access-control bypass for characteristic values the application intended to expose only over a secured link; exposure depends on the application declaring encrypt/authen-required notify/indicate characteristics and on the CCC being writable at a lower security tier. There is no memory-safety or availability impact. The fix adds bt_gatt_attr_resolve_value(), which maps a declaration attribute to the following value attribute before the permission check, and switches the Notify-Multiple path to the full BT_GATT_PERM_READ_ENCRYPT_MASK so the LESC requirement is also enforced. | |||||
| CVE-2026-10686 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | N/A | 5.8 MEDIUM |
| Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check. Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated. Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING. IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4. Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path). | |||||
| CVE-2026-10774 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | N/A | 2.4 LOW |
| Zephyr's Bluetooth Mesh subnet key management leaks one PSA Crypto key slot on every subnet-key teardown. In subsys/bluetooth/mesh/subnet.c, net_keys_create() imports the Private Beacon Key into a PSA key slot under CONFIG_BT_MESH_PRIV_BEACONS (enabled by default), but subnet_keys_destroy() guarded the matching psa_destroy_key() with CONFIG_BT_MESH_V1d1. That Kconfig symbol was removed when explicit Mesh 1.0.1 support was dropped, so the destroy branch became permanently dead code and the import is never balanced by a destroy. The imbalanced teardown is reached every time subnet keys are destroyed: deleting a subnet (Config Server NetKey Delete), completing a Key Refresh Procedure (which retires the old key set), and resetting/re-provisioning the node. The over-the-air triggers are processed only under the node's device key, so they are exercisable by the provisioner or network administrator that owns the node, reachable over the Bluetooth Mesh network. With the default CONFIG_MBEDTLS_PSA_KEY_SLOT_COUNT of 16, repeated add/delete or key-refresh cycles exhaust the shared PSA key-slot pool after roughly a dozen rounds. Once exhausted, bt_mesh_private_beacon_key() and thus subnet creation fail: the node can no longer add subnets or complete key refresh, and other PSA crypto consumers on the device may be starved, until the device is rebooted. The fix aligns the destroy guard with the import guard (CONFIG_BT_MESH_PRIV_BEACONS) so each slot is freed. | |||||
| CVE-2026-10848 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | N/A | 7.0 HIGH |
| The OCPP 1.6 client in subsys/net/lib/ocpp parsed inbound WAMP RPC frames in parse_rpc_msg() (subsys/net/lib/ocpp/ocpp_j.c) using a hand-rolled helper, extract_string_field(), that copied the message's uid and action fields with strncpy(out_buf, token + 1, outlen - 1) and then scanned the result with strchr(out_buf, '"'). Because strncpy does not NUL-terminate the destination when the source is at least outlen - 1 (127) bytes long, the subsequent strchr reads past the 128-byte destination buffer into adjacent stack memory; if a " byte is found beyond the buffer, a one-byte out-of-bounds NUL write also occurs. A related defect in extract_payload() runs strchr/strrchr over the receive buffer, which may not be NUL-terminated when a maximal-length frame fills it. The parsed bytes come directly from the OCPP central-system server over a websocket: the reader thread fills recv_buf via websocket_recv_msg() and calls parse_rpc_msg() on each inbound DATA frame (subsys/net/lib/ocpp/ocpp.c). A malicious or compromised central server, or an on-path attacker (OCPP is commonly deployed over plain ws://), can send an RPC frame whose uid or action field is 127+ bytes with no closing quote, triggering the out-of-bounds access. The primary impact is a remotely triggerable denial of service: the unbounded scan can fault on an unmapped page, and the stray NUL write can corrupt adjacent stack state. The over-read data is not reflected to the peer, so disclosure is limited. The feature is EXPERIMENTAL and must be explicitly enabled (CONFIG_OCPP). The fix replaces the manual parser with the bounds-respecting json_mixed_arr_parse() and copies the extracted uid with an explicitly NUL-terminated buffer, eliminating both over-reads. | |||||
| CVE-2026-10849 | 1 Zephyrproject | 1 Zephyr | 2026-10-23 | N/A | 8.2 HIGH |
| The hawkBit device management client in subsys/mgmt/hawkbit accumulates the body of an HTTP response from the update server into a heap buffer in response_json_cb() (subsys/mgmt/hawkbit/hawkbit.c). The buffer is sized to hold the received body bytes but reserves no space for a terminating NUL. When the full response has arrived, the code writes response_data[downloaded_size] = '\0' — and whenever the accumulated body length equals the allocation, that terminator lands one byte past the end of the heap object (a heap-based out-of-bounds write, CWE-122 / CWE-787). The body length and fragmentation are taken directly from the parsed HTTP response (rsp->body_frag_start / rsp->body_frag_len) and are fully controlled by the remote hawkBit server, which chooses its own response length. The precise trigger depends on how the buffer grows, and both forms are remotely reachable. Since v4.0.0 the reallocation is sized to exactly downloaded_size + body_len, so any response body larger than the 1100-byte initial buffer makes the out-of-bounds write deterministic; such response sizes are normal for hawkBit deployment metadata. Before v4.0.0 the buffer grew by doubling and the growth check ((downloaded_size + body_len) > response_buffer_size) is false at equality, so a response body whose length is exactly the current allocation — 1100 bytes with the default initial buffer — skips the reallocation entirely and writes the terminator at response_data[1100] of an 1100-byte object. The HTTP length-mismatch check does not catch this, because the declared and received lengths genuinely agree. Either form is reachable by a malicious, compromised, or man-in-the-middle update server (TLS is optional and, when enabled, does not protect against a hostile server), with no authentication of response content and no client-side length cap protecting the write. The out-of-bounds write is a fixed single NUL byte immediately following the allocation, corrupting adjacent allocator metadata or the next allocation. The practical impact is heap corruption leading to denial of service (fault on a subsequent allocation or free), with the bounded, allocator-dependent possibility of further corruption. The fix sizes the buffer to the body length plus one and copies with memcpy, ensuring the terminator always lands within the allocation. | |||||
| CVE-2025-20747 | 6 Google, Linuxfoundation, Mediatek and 3 more | 23 Android, Yocto, Mt2718 and 20 more | 2026-10-18 | N/A | 6.7 MEDIUM |
| In gnss service, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10010443; Issue ID: MSV-3966. | |||||
| CVE-2025-20746 | 6 Google, Linuxfoundation, Mediatek and 3 more | 23 Android, Yocto, Mt2718 and 20 more | 2026-10-18 | N/A | 6.7 MEDIUM |
| In gnss service, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10010441; Issue ID: MSV-3967. | |||||
| CVE-2026-5590 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 6.4 MEDIUM |
| A race condition during TCP connection teardown can cause tcp_recv() to operate on a connection that has already been released. If tcp_conn_search() returns NULL while processing a SYN packet, a NULL pointer derived from stale context data is passed to tcp_backlog_is_full() and dereferenced without validation, leading to a crash. | |||||
| CVE-2026-5589 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 6.3 MEDIUM |
| An integer underflow in bt_mesh_sol_recv() in the Bluetooth Mesh solicitation handling (subsys/bluetooth/mesh/solicitation.c) leads to an out-of-bounds write. When CONFIG_BT_MESH_OD_PRIV_PROXY_SRV is enabled, the function parses solicitation PDUs from raw BLE advertising payloads. The AD parsing loop reads an attacker-controlled length byte (reported_len) and computes reported_len - 3 without checking that reported_len >= 3. When reported_len is less than 3, the subtraction is performed in signed int arithmetic and yields a negative value that bypasses the length guard and is then implicitly converted to a very large size_t when passed to net_buf_simple_pull_mem(). In builds without assertions, this wraps the buffer length and advances the data pointer far out of bounds, so subsequent reads dereference invalid memory. A nearby BLE device can trigger this with a non-connectable advertisement carrying a UUID16 AD structure and a crafted length byte, with no pairing or prior association required, potentially leading to denial of service or arbitrary code execution. | |||||
| CVE-2026-5072 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 6.5 MEDIUM |
| A bitwise shift vulnerability in Zephyr's PTP subsystem allows a remote attacker to cause undefined behavior and potential system crashes. An attacker sends a crafted PTP_MSG_MANAGEMENT message to set an unvalidated negative log_announce_interval value in the port's data set. When a subsequent PTP_MSG_ANNOUNCE message is processed, port_timer_set_timeout_random computes a timeout as NSEC_PER_SEC >> -log_seconds; if the attacker-supplied value is sufficiently negative (e.g., -127), the shift amount exceeds the 64-bit integer width, triggering undefined behavior in C. This can cause a system crash via a compiler-generated illegal instruction trap on some architectures, or produce an erroneous zero timeout leading to resource starvation loops or other logical errors. | |||||
| CVE-2026-5071 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 6.1 MEDIUM |
| The SocketCAN implementation validates the length of a user-provided buffer containing a socketcan_frame object using only a NET_ASSERT statement in zcan_sendto_ctx() before dereferencing it in socketcan_to_can_frame(). In production builds where assertions are disabled, a userspace application that controls the length passed to a sendto syscall can supply an incomplete or truncated frame, causing socketcan_to_can_frame() to dereference fields beyond the end of the buffer. This results in an out-of-bounds read that can cause denial-of-service crashes or, because the parsed frame contents are transmitted on the network, leak adjacent memory. | |||||
| CVE-2026-5068 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 7.6 HIGH |
| A remote, unauthenticated BLE peer can trigger a 2-byte out-of-bounds write in the Bluetooth host during L2CAP LE CoC SDU reassembly. When the application enables segmentation (via chan_ops.alloc_buf) and the chosen RX pool has a user_data_size smaller than 2 bytes, the segmentation counter stored in the net_buf user_data area is written out of bounds in l2cap_chan_le_recv_seg (subsys/bluetooth/host/l2cap.c). The observed effects are an AddressSanitizer abort and, without ASan, heap corruption / fatal error. | |||||
| CVE-2026-5067 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 9.8 CRITICAL |
| A remote, unauthenticated attacker can trigger memory corruption in Zephyr's HTTP server WebSocket upgrade path by sending a crafted Sec-WebSocket-Key header. The HTTP/1 header parser copies the header into a fixed-size buffer using a bounded copy that does not guarantee NUL termination when the input length reaches the buffer size. During upgrade handling the buffer is copied to a local stack buffer and passed to strlen(); if no NUL exists in-bounds, strlen() reads beyond the stack buffer and subsequent concatenation with the WebSocket magic string can write out of bounds. This leads to out-of-bounds read and write on stack memory, resulting in crash (denial of service) and potentially code execution. The path is reachable when CONFIG_HTTP_SERVER_WEBSOCKET is enabled. | |||||
| CVE-2026-5066 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 6.3 MEDIUM |
| A potential out-of-bounds write/read exists in the TLS socket connect path of the network sockets subsystem (subsys/net/lib/sockets/sockets_tls.c). When the TLS session cache is enabled, tls_session_store() and tls_session_restore() memcpy the caller-supplied address into a fixed-size buffer using the caller-controlled addrlen value without validating it against the destination size. struct net_sockaddr is an opaque type, so an application can pass an addrlen larger than sizeof(struct net_sockaddr) (for example 128 bytes into a 24-byte stack buffer), causing the memcpy to read and write past the end of the address memory used by the TLS session cache. This out-of-bounds write can lead to a crash and denial of service, and potentially to arbitrary code execution. | |||||
| CVE-2026-4179 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 6.1 MEDIUM |
| Issues in stm32 USB device driver (drivers/usb/device/usb_dc_stm32.c) can lead to an infinite while loop. | |||||
| CVE-2026-1679 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 7.3 HIGH |
| The eswifi socket offload driver copies user-provided payloads into a fixed buffer without checking available space; oversized sends overflow `eswifi->buf`, corrupting kernel memory (CWE-120). Exploit requires local code that can call the socket send API; no remote attacker can reach it directly. | |||||
| CVE-2026-1678 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 9.4 CRITICAL |
| dns_unpack_name() caches the buffer tailroom once and reuses it while appending DNS labels. As the buffer grows, the cached size becomes incorrect, and the final null terminator can be written past the buffer. With assertions disabled (default), a malicious DNS response can trigger an out-of-bounds write when CONFIG_DNS_RESOLVER is enabled. | |||||
| CVE-2026-0849 | 1 Zephyrproject | 1 Zephyr | 2026-10-15 | N/A | 3.8 LOW |
| Malformed ATAES132A responses with an oversized length field overflow a 52-byte stack buffer in the Zephyr crypto driver, allowing a compromised device or bus attacker to corrupt kernel memory and potentially hijack execution. | |||||
| CVE-2025-7403 | 1 Zephyrproject | 1 Zephyr | 2026-10-13 | N/A | 7.6 HIGH |
| Unsafe handling in bt_conn_tx_processor causes a use-after-free, resulting in a write-before-zero. The written 4 bytes are attacker-controlled, enabling precise memory corruption. | |||||
| CVE-2025-2962 | 1 Zephyrproject | 1 Zephyr | 2026-10-13 | N/A | 7.5 HIGH |
| A denial-of-service issue in the dns implemenation could cause an infinite loop. | |||||