Total
189 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-10642 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | N/A | 4.6 MEDIUM |
| The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Because that peer is the device wired to the UART — which may be a removable or external module (e.g. an off-board Bluetooth controller on the HCI H4 link) rather than a permanently-bonded on-PCB part — the attack vector is scored Adjacent (AV:A) rather than Physical; the security subcommittee should confirm the vector against the specific deployment. Impact is availability only; there is no memory-safety, confidentiality, or integrity consequence. The vulnerable loop was introduced in commit b783bc8448ef (Feb 2025) and shipped in releases v4.1.0 through v4.4.0. The fix breaks out of the loop when CTS is blocking and arms the CTS modem-status interrupt to resume transmission when CTS re-asserts. | |||||
| CVE-2026-10641 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | N/A | 7.1 HIGH |
| Zephyr's Bluetooth Classic Hands-Free Profile (HFP) Hands-Free role parser (subsys/bluetooth/host/classic/hfp_hf.c) contains an out-of-bounds write. During Service Level Connection setup the HF sends AT+CIND=? and parses the AG's +CIND: response in cind_handle(), which assigns a per-entry counter index and calls cind_handle_values() for each list element. cind_handle_values() then wrote hf->ind_table[index] = i without verifying that index is within the 20-element int8_t ind_table[] array of struct bt_hfp_hf. Because the parser places no cap on the number of +CIND: list entries, a remote Attendant Gateway (a malicious, compromised, or spoofed peer the device connects to over Bluetooth) can send a response with more than 20 recognized indicator entries and drive index arbitrarily large, writing a small attacker-positioned value past the array into adjacent struct fields (feature masks, SDP/version state, the calls[] array, work/atomic bookkeeping) and potentially beyond the static connection pool slot. This yields memory corruption and at least denial of service of the Bluetooth host, triggered by a single malformed AT response with no user interaction. The sibling consumer ag_indicator_handle_values() already performed the equivalent bounds check; this commit adds the same index >= ARRAY_SIZE(hf->ind_table) guard to close the gap. Affects builds with CONFIG_BT_HFP_HF enabled; introduced with the original HFP HF CIND parser (~v1.7) and present through v4.4.0. | |||||
| CVE-2026-10640 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | N/A | 4.2 MEDIUM |
| Zephyr's IPv6 Neighbor Discovery send paths (net_ipv6_send_na, net_ipv6_send_ns, net_ipv6_send_rs in subsys/net/ip/ipv6_nbr.c) updated the per-interface ICMP-sent statistics by calling net_pkt_iface(pkt) after net_send_data(pkt) had already returned successfully. On the success path the network stack owns and releases the packet's reference (the L2/driver send unrefs it, e.g. ethernet_send -> net_pkt_unref), so for a freshly allocated packet with refcount 1 the net_pkt slab block can be freed before the statistics line runs (synchronously when no TX queue thread is configured, or via a concurrent TX thread otherwise). The subsequent net_pkt_iface(pkt) reads pkt->iface from the freed slab block, and with CONFIG_NET_STATISTICS_PER_INTERFACE enabled that loaded pointer is dereferenced to increment iface->stats.icmp.sent, a use-after-free (CWE-416). If the slab block was reallocated in the meantime the read/increment targets unrelated or attacker-influenced memory, yielding corrupted statistics, a fault/crash (denial of service), or potential limited memory corruption. The vulnerable Neighbor Advertisement path is reachable by any unauthenticated on-link node simply by sending ICMPv6 Neighbor Solicitations to a Zephyr node with native IPv6 enabled (handle_ns_input -> net_ipv6_send_na). Affected from v3.3.0 through v4.4.0; the fix uses the already-available iface argument instead of touching the sent packet. Configurations without per-interface statistics dereference only a global counter and are not affected by the memory-safety aspect. | |||||
| CVE-2026-10637 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | N/A | 5.9 MEDIUM |
| subsys/net/ip/ipv6_mld.c:mld_send() read the packet interface via net_pkt_iface(pkt) after net_send_data(pkt) returned successfully. Per the network stack's ownership contract (include/zephyr/net/net_core.h, and the explicit warning in subsys/net/ip/net_core.c:453-460 'do not use pkt after that call'), a successful send transfers ownership of the net_pkt and the L2 driver frees it (e.g. ethernet_send() unrefs the packet on success, subsys/net/l2/ethernet/ethernet.c:790), returning it to its k_mem_slab. The subsequent net_pkt_iface(pkt) is therefore a read of a freed object; the recovered interface pointer is then dereferenced and incremented by the per-interface statistics path (net_stats.h UPDATE_STAT/SET_STAT) when CONFIG_NET_STATISTICS_PER_INTERFACE is enabled. If the freed slot is concurrently reallocated, pkt->iface may read back as NULL (NULL-pointer dereference / crash) or as a stale/garbage pointer (stray increment write / memory corruption). The path is reachable remotely on the local link without authentication: handle_mld_query() (registered for NET_ICMPV6_MLD_QUERY) responds to a valid MLDv2 General Query (unspecified multicast address, hop limit 1) by calling send_mld_report() -> mld_send(). The result is a remotely triggerable denial of service of the networking stack, with a narrow possibility of memory corruption. The fix caches the interface in a local before sending and no longer touches the packet after net_send_data(). The IPv4/IGMP sibling (igmp_send) already used the corrected pattern. | |||||
| CVE-2026-10636 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | N/A | 3.7 LOW |
| In Zephyr's IPv4 IGMP implementation, igmp_send() in subsys/net/ip/igmp.c read the network interface back out of the packet via net_pkt_iface(pkt) after the packet had been handed to net_send_data(). On the successful-send path the packet's last reference may already have been released by the L2 driver or by the network stack's TX handling (synchronously in the default NET_TC_TX_COUNT=0 immediate-transmit configuration), returning the net_pkt slab block to its free list. The subsequent net_pkt_iface(pkt) dereferences the freed packet, a use-after-free read; with CONFIG_NET_STATISTICS_PER_INTERFACE the resulting dangling interface pointer is further dereferenced for a statistics-counter write. The IGMP send path is reachable without authentication from inbound IPv4 IGMP membership queries addressed to 224.0.0.1 (net_ipv4_igmp_input -> send_igmp_report/send_igmp_v3_report -> igmp_send), as well as from local multicast join/leave/rejoin operations. Realistic impact is undefined behavior and potential denial of service (sporadic crash or stats corruption); a controllable write requires the asynchronous TX path plus a concurrent slab reuse. The flaw was introduced with IGMPv2 support and affects releases from v2.6.0 through v4.4.0. The fix caches the interface pointer before sending. Note the analogous IPv6 MLD path (mld_send in subsys/net/ip/ipv6_mld.c) retains the same unfixed pattern. | |||||
| CVE-2026-10635 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | N/A | 6.3 MEDIUM |
| On Xtensa targets with CONFIG_USERSPACE and CONFIG_XTENSA_MMU, the page-table code (arch/xtensa/core/ptables.c) maintains a global list, xtensa_domain_list, of active memory domains using a list node embedded inside the caller-owned struct k_mem_domain. When a domain is destroyed via k_mem_domain_deinit() -> arch_mem_domain_deinit(), the page tables are torn down and domain->arch.ptables is set to NULL, but the domain's node was not removed from xtensa_domain_list. The freed/deinitialized domain therefore remained linked into the global list as a dangling pointer into caller-owned storage that may then be freed or reused. Any subsequent arch_mem_map()/arch_mem_unmap() operation (widely invoked by kernel memory-mapping and demand-paging code) traverses the stale node and dereferences domain->ptables: at minimum a NULL pointer dereference causing a fatal MMU exception (denial of service), and if the k_mem_domain storage has been freed or reused, a use-after-free in which a stale/controlled ptables value is dereferenced and written through during the page-table walk (l2_page_table_map writes l1_table[...] and l2_table[...], and xtensa_mmu_compute_domain_regs writes into the domain struct and the L1 table), yielding page-table memory corruption that can undermine userspace isolation. The vulnerable path is reachable only from privileged kernel/supervisor code (k_mem_domain_deinit is not a syscall), not directly from unprivileged user threads or remotely. Affected: Zephyr v4.4.0 (the Xtensa memory-domain de-initialization feature was introduced in commit 3032b58f52d and first shipped in v4.4.0); fixed on main by adding sys_slist_find_and_remove() in arch_mem_domain_deinit(). The Xtensa MPU path is unaffected. | |||||
| CVE-2026-10593 | 1 Zephyrproject | 1 Zephyr | 2026-07-14 | N/A | 6.5 MEDIUM |
| The Zephyr Bluetooth LE Audio Basic Audio Profile (BAP) unicast client mishandles peer-supplied ASE state notifications. In unicast_client_ep_qos_state() (subsys/bluetooth/audio/bap_unicast_client.c), the handler writes attacker-controlled QoS fields (interval, framing, phy, sdu, rtn, latency, pd) through the stream->qos pointer with only a stream != NULL guard. stream->qos is NULL for any stream that has been codec-configured via bt_bap_stream_config() but not yet added to a unicast group (it is set only by unicast_group_add_stream()). A malicious or buggy remote ASCS server, to which the local device is connected as a BAP unicast client, can send a GATT notification announcing the ASE has entered the QoS Configured state while the local endpoint is still in the Codec Configured state — a transition the dispatcher explicitly permits — during that window, causing a write through a NULL pointer and a crash (denial of service). The data written is itself remote-controlled. The defect shipped in v4.3.0 and v4.4.0 (and earlier). The fix re-points all BAP QoS storage to the always-valid embedded ep->qos struct, eliminating the NULL dereference. | |||||
| CVE-2026-1677 | 1 Zephyrproject | 1 Zephyr | 2026-07-08 | N/A | 5.3 MEDIUM |
| Zephyr sockets created with `IPPROTO_TLS_1_3` can still negotiate a TLS 1.2 connection when both TLS versions are enabled in Kconfig, because the socket-level protocol selection is not propagated to mbedTLS (e.g. via `mbedtls_ssl_conf_min_tls_version`). The ClientHello advertises both versions and the peer can establish TLS 1.2, so applications that assumed `IPPROTO_TLS_1_3` enforces TLS 1.3 may silently use TLS 1.2 and remain exposed to TLS 1.2-specific weaknesses. As a workaround, the `TLS_CIPHERSUITE_LIST` socket option can be restricted to TLS 1.3-only cipher suites. | |||||
| CVE-2026-1681 | 1 Zephyrproject | 1 Zephyr | 2026-07-08 | N/A | 6.1 MEDIUM |
| Issuing an ICMP ping via the `net ping` shell command to a device's own IPv4 address causes the network stack to recursively re-enter the input path on the same system work-queue stack. Because the destination is recognized as a local address, both the echo request and the resulting echo reply are processed inline before the current frame returns. The nested input-path frames exceed the work-queue stack and trigger a stack overflow. | |||||
| CVE-2026-13351 | 1 Zephyrproject | 1 Zephyr | 2026-07-06 | N/A | 7.5 HIGH |
| Zephyr's IPv6 network stack can be prevented from receiving or processing future incoming packets by sending a small number of maliciously fragmented IPv6 packets. When such a packet is handled by the fragment-header processing path, the associated RX network packet buffer (allocated from a memory slab) is not released back to the pool. Repeating the malicious packet exhausts all RX buffer slots, after which the device can no longer obtain RX buffers and stops receiving traffic, resulting in a denial of service. | |||||
| CVE-2026-4179 | 1 Zephyrproject | 1 Zephyr | 2026-06-17 | N/A | 6.1 MEDIUM |
| Issues in stm32 USB device driver (drivers/usb/device/usb_dc_stm32.c) can lead to an infinite while loop. | |||||
| CVE-2026-20435 | 6 Google, Linuxfoundation, Mediatek and 3 more | 40 Android, Yocto, Mt2737 and 37 more | 2026-06-17 | N/A | 4.6 MEDIUM |
| In preloader, there is a possible read of device unique identifiers due to a logic error. This could lead to local information disclosure, if an attacker has physical access to the device, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10607099; Issue ID: MSV-6118. | |||||
| CVE-2026-1679 | 1 Zephyrproject | 1 Zephyr | 2026-06-17 | N/A | 7.3 HIGH |
| The eswifi socket offload driver copies user-provided payloads into a fixed buffer without checking available space; oversized sends overflow `eswifi->buf`, corrupting kernel memory (CWE-120). Exploit requires local code that can call the socket send API; no remote attacker can reach it directly. | |||||
| CVE-2026-1678 | 1 Zephyrproject | 1 Zephyr | 2026-06-17 | N/A | 9.4 CRITICAL |
| dns_unpack_name() caches the buffer tailroom once and reuses it while appending DNS labels. As the buffer grows, the cached size becomes incorrect, and the final null terminator can be written past the buffer. With assertions disabled (default), a malicious DNS response can trigger an out-of-bounds write when CONFIG_DNS_RESOLVER is enabled. | |||||
| CVE-2026-0849 | 1 Zephyrproject | 1 Zephyr | 2026-06-17 | N/A | 3.8 LOW |
| Malformed ATAES132A responses with an oversized length field overflow a 52-byte stack buffer in the Zephyr crypto driver, allowing a compromised device or bus attacker to corrupt kernel memory and potentially hijack execution. | |||||
| CVE-2025-7403 | 1 Zephyrproject | 1 Zephyr | 2026-06-17 | N/A | 7.6 HIGH |
| Unsafe handling in bt_conn_tx_processor causes a use-after-free, resulting in a write-before-zero. The written 4 bytes are attacker-controlled, enabling precise memory corruption. | |||||
| CVE-2025-2962 | 1 Zephyrproject | 1 Zephyr | 2026-06-17 | N/A | 7.5 HIGH |
| A denial-of-service issue in the dns implemenation could cause an infinite loop. | |||||
| CVE-2025-20747 | 6 Google, Linuxfoundation, Mediatek and 3 more | 23 Android, Yocto, Mt2718 and 20 more | 2026-06-17 | N/A | 6.7 MEDIUM |
| In gnss service, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10010443; Issue ID: MSV-3966. | |||||
| CVE-2025-20746 | 6 Google, Linuxfoundation, Mediatek and 3 more | 23 Android, Yocto, Mt2718 and 20 more | 2026-06-17 | N/A | 6.7 MEDIUM |
| In gnss service, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10010441; Issue ID: MSV-3967. | |||||
| CVE-2025-20696 | 6 Google, Linuxfoundation, Mediatek and 3 more | 37 Android, Yocto, Mt6739 and 34 more | 2026-06-17 | N/A | 6.8 MEDIUM |
| In DA, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege, if an attacker has physical access to the device, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS09915215; Issue ID: MSV-3801. | |||||