Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38074 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: protect vq->log_used with vq->mutex The vhost-scsi completion path may access vq->log_base when vq->log_used is already set to false. vhost-thread QEMU-thread vhost_scsi_complete_cmd_work() -> vhost_add_used() -> vhost_add_used_n() if (unlikely(vq->log_used)) QEMU disables vq->log_used via VHOST_SET_VRING_ADDR. mutex_lock(&vq->mutex); vq->log_used = false now! mutex_unlock(&vq->mutex); QEMU gfree(vq->log_base) log_used() -> log_write(vq->log_base) Assuming the VMM is QEMU. The vq->log_base is from QEMU userpace and can be reclaimed via gfree(). As a result, this causes invalid memory writes to QEMU userspace. The control queue path has the same issue. | |||||
| CVE-2025-38068 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: lzo - Fix compression buffer overrun Unlike the decompression code, the compression code in LZO never checked for output overruns. It instead assumes that the caller always provides enough buffer space, disregarding the buffer length provided by the caller. Add a safe compression interface that checks for the end of buffer before each write. Use the safe interface in crypto/lzo. | |||||
| CVE-2025-38065 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: orangefs: Do not truncate file size 'len' is used to store the result of i_size_read(), so making 'len' a size_t results in truncation to 4GiB on 32-bit systems. | |||||
| CVE-2025-38062 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: genirq/msi: Store the IOMMU IOVA directly in msi_desc instead of iommu_cookie The IOMMU translation for MSI message addresses has been a 2-step process, separated in time: 1) iommu_dma_prepare_msi(): A cookie pointer containing the IOVA address is stored in the MSI descriptor when an MSI interrupt is allocated. 2) iommu_dma_compose_msi_msg(): this cookie pointer is used to compute a translated message address. This has an inherent lifetime problem for the pointer stored in the cookie that must remain valid between the two steps. However, there is no locking at the irq layer that helps protect the lifetime. Today, this works under the assumption that the iommu domain is not changed while MSI interrupts being programmed. This is true for normal DMA API users within the kernel, as the iommu domain is attached before the driver is probed and cannot be changed while a driver is attached. Classic VFIO type1 also prevented changing the iommu domain while VFIO was running as it does not support changing the "container" after starting up. However, iommufd has improved this so that the iommu domain can be changed during VFIO operation. This potentially allows userspace to directly race VFIO_DEVICE_ATTACH_IOMMUFD_PT (which calls iommu_attach_group()) and VFIO_DEVICE_SET_IRQS (which calls into iommu_dma_compose_msi_msg()). This potentially causes both the cookie pointer and the unlocked call to iommu_get_domain_for_dev() on the MSI translation path to become UAFs. Fix the MSI cookie UAF by removing the cookie pointer. The translated IOVA address is already known during iommu_dma_prepare_msi() and cannot change. Thus, it can simply be stored as an integer in the MSI descriptor. The other UAF related to iommu_get_domain_for_dev() will be addressed in patch "iommu: Make iommu_dma_prepare_msi() into a generic operation" by using the IOMMU group mutex. | |||||
| CVE-2025-38057 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: espintcp: fix skb leaks A few error paths are missing a kfree_skb. | |||||
| CVE-2025-38051 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free in cifs_fill_dirent There is a race condition in the readdir concurrency process, which may access the rsp buffer after it has been released, triggering the following KASAN warning. ================================================================== BUG: KASAN: slab-use-after-free in cifs_fill_dirent+0xb03/0xb60 [cifs] Read of size 4 at addr ffff8880099b819c by task a.out/342975 CPU: 2 UID: 0 PID: 342975 Comm: a.out Not tainted 6.15.0-rc6+ #240 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xce/0x640 kasan_report+0xb8/0xf0 cifs_fill_dirent+0xb03/0xb60 [cifs] cifs_readdir+0x12cb/0x3190 [cifs] iterate_dir+0x1a1/0x520 __x64_sys_getdents+0x134/0x220 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f996f64b9f9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0d f7 c3 0c 00 f7 d8 64 89 8 RSP: 002b:00007f996f53de78 EFLAGS: 00000207 ORIG_RAX: 000000000000004e RAX: ffffffffffffffda RBX: 00007f996f53ecdc RCX: 00007f996f64b9f9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007f996f53dea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000207 R12: ffffffffffffff88 R13: 0000000000000000 R14: 00007ffc8cd9a500 R15: 00007f996f51e000 </TASK> Allocated by task 408: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x6e/0x70 kmem_cache_alloc_noprof+0x117/0x3d0 mempool_alloc_noprof+0xf2/0x2c0 cifs_buf_get+0x36/0x80 [cifs] allocate_buffers+0x1d2/0x330 [cifs] cifs_demultiplex_thread+0x22b/0x2690 [cifs] kthread+0x394/0x720 ret_from_fork+0x34/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 342979: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kmem_cache_free+0x2b8/0x500 cifs_buf_release+0x3c/0x70 [cifs] cifs_readdir+0x1c97/0x3190 [cifs] iterate_dir+0x1a1/0x520 __x64_sys_getdents64+0x134/0x220 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff8880099b8000 which belongs to the cache cifs_request of size 16588 The buggy address is located 412 bytes inside of freed 16588-byte region [ffff8880099b8000, ffff8880099bc0cc) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x99b8 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0x80000000000040(head|node=0|zone=1) page_type: f5(slab) raw: 0080000000000040 ffff888001e03400 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000010001 00000000f5000000 0000000000000000 head: 0080000000000040 ffff888001e03400 0000000000000000 dead000000000001 head: 0000000000000000 0000000000010001 00000000f5000000 0000000000000000 head: 0080000000000003 ffffea0000266e01 00000000ffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880099b8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880099b8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880099b8180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880099b8200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880099b8280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== POC is available in the link [1]. The problem triggering process is as follows: Process 1 Process 2 ----------------------------------- ---truncated--- | |||||
| CVE-2025-38028 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: NFS/localio: Fix a race in nfs_local_open_fh() Once the clp->cl_uuid.lock has been dropped, another CPU could come in and free the struct nfsd_file that was just added. To prevent that from happening, take the RCU read lock before dropping the spin lock. | |||||
| CVE-2025-38024 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bug Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x7d/0xa0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcf/0x610 mm/kasan/report.c:489 kasan_report+0xb5/0xe0 mm/kasan/report.c:602 rxe_queue_cleanup+0xd0/0xe0 drivers/infiniband/sw/rxe/rxe_queue.c:195 rxe_cq_cleanup+0x3f/0x50 drivers/infiniband/sw/rxe/rxe_cq.c:132 __rxe_cleanup+0x168/0x300 drivers/infiniband/sw/rxe/rxe_pool.c:232 rxe_create_cq+0x22e/0x3a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1109 create_cq+0x658/0xb90 drivers/infiniband/core/uverbs_cmd.c:1052 ib_uverbs_create_cq+0xc7/0x120 drivers/infiniband/core/uverbs_cmd.c:1095 ib_uverbs_write+0x969/0xc90 drivers/infiniband/core/uverbs_main.c:679 vfs_write fs/read_write.c:677 [inline] vfs_write+0x26a/0xcc0 fs/read_write.c:659 ksys_write+0x1b8/0x200 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f In the function rxe_create_cq, when rxe_cq_from_init fails, the function rxe_cleanup will be called to handle the allocated resources. In fact, some memory resources have already been freed in the function rxe_cq_from_init. Thus, this problem will occur. The solution is to let rxe_cleanup do all the work. | |||||
| CVE-2025-38022 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix "KASAN: slab-use-after-free Read in ib_register_device" problem Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 strlen+0x93/0xa0 lib/string.c:420 __fortify_strlen include/linux/fortify-string.h:268 [inline] get_kobj_path_length lib/kobject.c:118 [inline] kobject_get_path+0x3f/0x2a0 lib/kobject.c:158 kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545 ib_register_device drivers/infiniband/core/device.c:1472 [inline] ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393 rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552 rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225 nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796 rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmsg+0x16d/0x220 net/socket.c:2652 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This problem is similar to the problem that the commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name") fixes. The root cause is: the function ib_device_rename() renames the name with lock. But in the function kobject_uevent(), this name is accessed without lock protection at the same time. The solution is to add the lock protection when this name is accessed in the function kobject_uevent(). | |||||
| CVE-2025-38018 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/tls: fix kernel panic when alloc_page failed We cannot set frag_list to NULL pointer when alloc_page failed. It will be used in tls_strp_check_queue_ok when the next time tls_strp_read_sock is called. This is because we don't reset full_len in tls_strp_flush_anchor_copy() so the recv path will try to continue handling the partial record on the next call but we dettached the rcvq from the frag list. Alternative fix would be to reset full_len. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Call trace: tls_strp_check_rcv+0x128/0x27c tls_strp_data_ready+0x34/0x44 tls_data_ready+0x3c/0x1f0 tcp_data_ready+0x9c/0xe4 tcp_data_queue+0xf6c/0x12d0 tcp_rcv_established+0x52c/0x798 | |||||
| CVE-2025-38016 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: abort dispatch if device destroyed The current HID bpf implementation assumes no output report/request will go through it after hid_bpf_destroy_device() has been called. This leads to a bug that unplugging certain types of HID devices causes a cleaned- up SRCU to be accessed. The bug was previously a hidden failure until a recent x86 percpu change [1] made it access not-present pages. The bug will be triggered if the conditions below are met: A) a device under the driver has some LEDs on B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver) If condition A is met, hidinput_led_worker() is always scheduled *after* hid_bpf_destroy_device(). hid_destroy_device ` hid_bpf_destroy_device ` cleanup_srcu_struct(&hdev->bpf.srcu) ` hid_remove_device ` ... ` led_classdev_unregister ` led_trigger_set(led_cdev, NULL) ` led_set_brightness(led_cdev, LED_OFF) ` ... ` input_inject_event ` input_event_dispose ` hidinput_input_event ` schedule_work(&hid->led_work) [hidinput_led_worker] This is fine when condition B is not met, where hidinput_led_worker() calls hid_ll_driver->request(). This is the case for most HID drivers, which implement it or use the generic one from usbhid. The driver itself or an underlying driver will then abort processing the request. Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads to the bug. hidinput_led_worker ` hid_hw_output_report ` dispatch_hid_bpf_output_report ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) The bug has existed since the introduction [2] of dispatch_hid_bpf_output_report(). However, the same bug also exists in dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect because of the lack of [1], but confirmed bpf.destroyed == 1) the bug against the commit (i.e., the Fixes:) introducing the function. This is because hidinput_led_worker() falls back to hid_hw_raw_request() when hid_ll_driver->output_report() is uninplemented (e.g., logitech- djreceiver). hidinput_led_worker ` hid_hw_output_report: -ENOSYS ` hid_hw_raw_request ` dispatch_hid_bpf_raw_requests ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) Fix the issue by returning early in the two mentioned functions if hid_bpf has been marked as destroyed. Though dispatch_hid_bpf_device_event() handles input events, and there is no evidence that it may be called after the destruction, the same check, as a safety net, is also added to it to maintain the consistency among all dispatch functions. The impact of the bug on other architectures is unclear. Even if it acts as a hidden failure, this is still dangerous because it corrupts whatever is on the address calculated by SRCU. Thus, CC'ing the stable list. [1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets") [2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for hid_hw_output_report") | |||||
| CVE-2025-38012 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator BPF programs may call next() and destroy() on BPF iterators even after new() returns an error value (e.g. bpf_for_each() macro ignores error returns from new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized state after an error return causing bpf_iter_scx_dsq_next() to dereference garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that next() and destroy() become noops. | |||||
| CVE-2025-38005 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma: Add missing locking Recent kernels complain about a missing lock in k3-udma.c when the lock validator is enabled: [ 4.128073] WARNING: CPU: 0 PID: 746 at drivers/dma/ti/../virt-dma.h:169 udma_start.isra.0+0x34/0x238 [ 4.137352] CPU: 0 UID: 0 PID: 746 Comm: kworker/0:3 Not tainted 6.12.9-arm64 #28 [ 4.144867] Hardware name: pp-v12 (DT) [ 4.148648] Workqueue: events udma_check_tx_completion [ 4.153841] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.160834] pc : udma_start.isra.0+0x34/0x238 [ 4.165227] lr : udma_start.isra.0+0x30/0x238 [ 4.169618] sp : ffffffc083cabcf0 [ 4.172963] x29: ffffffc083cabcf0 x28: 0000000000000000 x27: ffffff800001b005 [ 4.180167] x26: ffffffc0812f0000 x25: 0000000000000000 x24: 0000000000000000 [ 4.187370] x23: 0000000000000001 x22: 00000000e21eabe9 x21: ffffff8000fa0670 [ 4.194571] x20: ffffff8001b6bf00 x19: ffffff8000fa0430 x18: ffffffc083b95030 [ 4.201773] x17: 0000000000000000 x16: 00000000f0000000 x15: 0000000000000048 [ 4.208976] x14: 0000000000000048 x13: 0000000000000000 x12: 0000000000000001 [ 4.216179] x11: ffffffc08151a240 x10: 0000000000003ea1 x9 : ffffffc08046ab68 [ 4.223381] x8 : ffffffc083cabac0 x7 : ffffffc081df3718 x6 : 0000000000029fc8 [ 4.230583] x5 : ffffffc0817ee6d8 x4 : 0000000000000bc0 x3 : 0000000000000000 [ 4.237784] x2 : 0000000000000000 x1 : 00000000001fffff x0 : 0000000000000000 [ 4.244986] Call trace: [ 4.247463] udma_start.isra.0+0x34/0x238 [ 4.251509] udma_check_tx_completion+0xd0/0xdc [ 4.256076] process_one_work+0x244/0x3fc [ 4.260129] process_scheduled_works+0x6c/0x74 [ 4.264610] worker_thread+0x150/0x1dc [ 4.268398] kthread+0xd8/0xe8 [ 4.271492] ret_from_fork+0x10/0x20 [ 4.275107] irq event stamp: 220 [ 4.278363] hardirqs last enabled at (219): [<ffffffc080a27c7c>] _raw_spin_unlock_irq+0x38/0x50 [ 4.287183] hardirqs last disabled at (220): [<ffffffc080a1c154>] el1_dbg+0x24/0x50 [ 4.294879] softirqs last enabled at (182): [<ffffffc080037e68>] handle_softirqs+0x1c0/0x3cc [ 4.303437] softirqs last disabled at (177): [<ffffffc080010170>] __do_softirq+0x1c/0x28 [ 4.311559] ---[ end trace 0000000000000000 ]--- This commit adds the missing locking. | |||||
| CVE-2025-38003 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu read protection for procfs content When the procfs content is generated for a bcm_op which is in the process to be removed the procfs output might show unreliable data (UAF). As the removal of bcm_op's is already implemented with rcu handling this patch adds the missing rcu_read_lock() and makes sure the list entries are properly removed under rcu protection. | |||||
| CVE-2025-38002 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/fdinfo: grab ctx->uring_lock around io_uring_show_fdinfo() Not everything requires locking in there, which is why the 'has_lock' variable exists. But enough does that it's a bit unwieldy to manage. Wrap the whole thing in a ->uring_lock trylock, and just return with no output if we fail to grab it. The existing trylock() will already have greatly diminished utility/output for the failure case. This fixes an issue with reading the SQE fields, if the ring is being actively resized at the same time. | |||||
| CVE-2025-37996 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort() Commit fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM") made the initialization of the local memcache variable in user_mem_abort() conditional, leaving a codepath where it is used uninitialized via kvm_pgtable_stage2_map(). This can fail on any path that requires a stage-2 allocation without transition via a permission fault or dirty logging. Fix this by making sure that memcache is always valid. | |||||
| CVE-2025-37988 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fix a couple of races in MNT_TREE_BENEATH handling by do_move_mount() Normally do_lock_mount(path, _) is locking a mountpoint pinned by *path and at the time when matching unlock_mount() unlocks that location it is still pinned by the same thing. Unfortunately, for 'beneath' case it's no longer that simple - the object being locked is not the one *path points to. It's the mountpoint of path->mnt. The thing is, without sufficient locking ->mnt_parent may change under us and none of the locks are held at that point. The rules are * mount_lock stabilizes m->mnt_parent for any mount m. * namespace_sem stabilizes m->mnt_parent, provided that m is mounted. * if either of the above holds and refcount of m is positive, we are guaranteed the same for refcount of m->mnt_parent. namespace_sem nests inside inode_lock(), so do_lock_mount() has to take inode_lock() before grabbing namespace_sem. It does recheck that path->mnt is still mounted in the same place after getting namespace_sem, and it does take care to pin the dentry. It is needed, since otherwise we might end up with racing mount --move (or umount) happening while we were getting locks; in that case dentry would no longer be a mountpoint and could've been evicted on memory pressure along with its inode - not something you want when grabbing lock on that inode. However, pinning a dentry is not enough - the matching mount is also pinned only by the fact that path->mnt is mounted on top it and at that point we are not holding any locks whatsoever, so the same kind of races could end up with all references to that mount gone just as we are about to enter inode_lock(). If that happens, we are left with filesystem being shut down while we are holding a dentry reference on it; results are not pretty. What we need to do is grab both dentry and mount at the same time; that makes inode_lock() safe *and* avoids the problem with fs getting shut down under us. After taking namespace_sem we verify that path->mnt is still mounted (which stabilizes its ->mnt_parent) and check that it's still mounted at the same place. From that point on to the matching namespace_unlock() we are guaranteed that mount/dentry pair we'd grabbed are also pinned by being the mountpoint of path->mnt, so we can quietly drop both the dentry reference (as the current code does) and mnt one - it's OK to do under namespace_sem, since we are not dropping the final refs. That solves the problem on do_lock_mount() side; unlock_mount() also has one, since dentry is guaranteed to stay pinned only until the namespace_unlock(). That's easy to fix - just have inode_unlock() done earlier, while it's still pinned by mp->m_dentry. | |||||
| CVE-2025-37979 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix sc7280 lpass potential buffer overflow Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution") cause out of bounds access in arrays of sc7280 driver data (e.g. in case of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()). Redefine LPASS_MAX_PORTS to consider the maximum possible port id for q6dsp as sc7280 driver utilizes some of those values. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2025-37947 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent out-of-bounds stream writes by validating *pos ksmbd_vfs_stream_write() did not validate whether the write offset (*pos) was within the bounds of the existing stream data length (v_len). If *pos was greater than or equal to v_len, this could lead to an out-of-bounds memory write. This patch adds a check to ensure *pos is less than v_len before proceeding. If the condition fails, -EINVAL is returned. | |||||
| CVE-2025-37943 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi In certain cases, hardware might provide packets with a length greater than the maximum native Wi-Fi header length. This can lead to accessing and modifying fields in the header within the ath12k_dp_rx_h_undecap_nwifi function for DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and potentially resulting in invalid data access and memory corruption. Add a sanity check before processing the SKB to prevent invalid data access in the undecap native Wi-Fi function for the DP_RX_DECAP_TYPE_NATIVE_WIFI decap type. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 | |||||