Total
19304 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38650 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: remove mutex_lock check in hfsplus_free_extents Syzbot reported an issue in hfsplus filesystem: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4400 at fs/hfsplus/extents.c:346 hfsplus_free_extents+0x700/0xad0 Call Trace: <TASK> hfsplus_file_truncate+0x768/0xbb0 fs/hfsplus/extents.c:606 hfsplus_write_begin+0xc2/0xd0 fs/hfsplus/inode.c:56 cont_expand_zero fs/buffer.c:2383 [inline] cont_write_begin+0x2cf/0x860 fs/buffer.c:2446 hfsplus_write_begin+0x86/0xd0 fs/hfsplus/inode.c:52 generic_cont_expand_simple+0x151/0x250 fs/buffer.c:2347 hfsplus_setattr+0x168/0x280 fs/hfsplus/inode.c:263 notify_change+0xe38/0x10f0 fs/attr.c:420 do_truncate+0x1fb/0x2e0 fs/open.c:65 do_sys_ftruncate+0x2eb/0x380 fs/open.c:193 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd To avoid deadlock, Commit 31651c607151 ("hfsplus: avoid deadlock on file truncation") unlock extree before hfsplus_free_extents(), and add check wheather extree is locked in hfsplus_free_extents(). However, when operations such as hfsplus_file_release, hfsplus_setattr, hfsplus_unlink, and hfsplus_get_block are executed concurrently in different files, it is very likely to trigger the WARN_ON, which will lead syzbot and xfstest to consider it as an abnormality. The comment above this warning also describes one of the easy triggering situations, which can easily trigger and cause xfstest&syzbot to report errors. [task A] [task B] ->hfsplus_file_release ->hfsplus_file_truncate ->hfs_find_init ->mutex_lock ->mutex_unlock ->hfsplus_write_begin ->hfsplus_get_block ->hfsplus_file_extend ->hfsplus_ext_read_extent ->hfs_find_init ->mutex_lock ->hfsplus_free_extents WARN_ON(mutex_is_locked) !!! Several threads could try to lock the shared extents tree. And warning can be triggered in one thread when another thread has locked the tree. This is the wrong behavior of the code and we need to remove the warning. | |||||
| CVE-2025-38649 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: qcs615: fix a crash issue caused by infinite loop for Coresight An infinite loop has been created by the Coresight devices. When only a source device is enabled, the coresight_find_activated_sysfs_sink function is recursively invoked in an attempt to locate an active sink device, ultimately leading to a stack overflow and system crash. Therefore, disable the replicator1 to break the infinite loop and prevent a potential stack overflow. replicator1_out -> funnel_swao_in6 -> tmc_etf_swao_in -> tmc_etf_swao_out | | replicator1_in replicator_swao_in | | replicator0_out1 replicator_swao_out0 | | replicator0_in funnel_in1_in3 | | tmc_etf_out <- tmc_etf_in <- funnel_merg_out <- funnel_merg_in1 <- funnel_in1_out [call trace] dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 panic+0x340/0x3b0 nmi_panic+0x94/0xa0 panic_bad_stack+0x114/0x138 handle_bad_stack+0x34/0xb8 __bad_stack+0x78/0x80 coresight_find_activated_sysfs_sink+0x28/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] ... coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_enable_sysfs+0x80/0x2a0 [coresight] side effect after the change: Only trace data originating from AOSS can reach the ETF_SWAO and EUD sinks. | |||||
| CVE-2025-38648 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: stm32: Check for cfg availability in stm32_spi_probe The stm32_spi_probe function now includes a check to ensure that the pointer returned by of_device_get_match_data is not NULL before accessing its members. This resolves a warning where a potential NULL pointer dereference could occur when accessing cfg->has_device_mode. Before accessing the 'has_device_mode' member, we verify that 'cfg' is not NULL. If 'cfg' is NULL, an error message is logged. This change ensures that the driver does not attempt to access configuration data if it is not available, thus preventing a potential system crash due to a NULL pointer dereference. | |||||
| CVE-2025-38647 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: sar: drop lockdep assertion in rtw89_set_sar_from_acpi The following assertion is triggered on the rtw89 driver startup. It looks meaningless to hold wiphy lock on the early init stage so drop the assertion. WARNING: CPU: 7 PID: 629 at drivers/net/wireless/realtek/rtw89/sar.c:502 rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core] CPU: 7 UID: 0 PID: 629 Comm: (udev-worker) Not tainted 6.15.0+ #29 PREEMPT(lazy) Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN50WW 09/27/2024 RIP: 0010:rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core] Call Trace: <TASK> rtw89_sar_init+0x68/0x2c0 [rtw89_core] rtw89_core_init+0x188e/0x1e50 [rtw89_core] rtw89_pci_probe+0x530/0xb50 [rtw89_pci] local_pci_probe+0xd9/0x190 pci_call_probe+0x183/0x540 pci_device_probe+0x171/0x2c0 really_probe+0x1e1/0x890 __driver_probe_device+0x18c/0x390 driver_probe_device+0x4a/0x120 __driver_attach+0x1a0/0x530 bus_for_each_dev+0x10b/0x190 bus_add_driver+0x2eb/0x540 driver_register+0x1a3/0x3a0 do_one_initcall+0xd5/0x450 do_init_module+0x2cc/0x8f0 init_module_from_file+0xe1/0x150 idempotent_init_module+0x226/0x760 __x64_sys_finit_module+0xcd/0x150 do_syscall_64+0x94/0x380 entry_SYSCALL_64_after_hwframe+0x76/0x7e Found by Linux Verification Center (linuxtesting.org). | |||||
| CVE-2025-38646 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid NULL dereference when RX problematic packet on unsupported 6 GHz band With a quite rare chance, RX report might be problematic to make SW think a packet is received on 6 GHz band even if the chip does not support 6 GHz band actually. Since SW won't initialize stuffs for unsupported bands, NULL dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() -> rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it. The following is a crash log for this case. BUG: kernel NULL pointer dereference, address: 0000000000000032 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1907 Comm: irq/131-rtw89_p Tainted: G U 6.6.56-05896-g89f5fb0eb30b #1 (HASH:1400 4) Hardware name: Google Telith/Telith, BIOS Google_Telith.15217.747.0 11/12/2024 RIP: 0010:rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core] Code: 4c 89 7d c8 48 89 55 c0 49 8d 44 24 02 48 89 45 b8 45 31 ff eb 11 41 c6 45 3a 01 41 b7 01 4d 8b 6d 00 4d 39 f5 74 42 8b 43 10 <41> 33 45 32 0f b7 4b 14 66 41 33 4d 36 0f b7 c9 09 c1 74 d8 4d 85 RSP: 0018:ffff9f3080138ca0 EFLAGS: 00010246 RAX: 00000000b8bf5770 RBX: ffff91b5e8c639c0 RCX: 0000000000000011 RDX: ffff91b582de1be8 RSI: 0000000000000000 RDI: ffff91b5e8c639e6 RBP: ffff9f3080138d00 R08: 0000000000000000 R09: 0000000000000000 R10: ffff91b59de70000 R11: ffffffffc069be50 R12: ffff91b5e8c639e4 R13: 0000000000000000 R14: ffff91b5828020b8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff91b8efa40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000032 CR3: 00000002bf838000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <IRQ> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x4f/0xa0 ? asm_exc_page_fault+0x22/0x30 ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? rtw89_vif_rx_stats_iter+0xd2/0x310 [rtw89_core (HASH:1400 5)] __iterate_interfaces+0x59/0x110 [mac80211 (HASH:1400 6)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ? __pfx_rtw89_vif_rx_stats_iter+0x10/0x10 [rtw89_core (HASH:1400 5)] ieee80211_iterate_active_interfaces_atomic+0x36/0x50 [mac80211 (HASH:1400 6)] rtw89_core_rx_to_mac80211+0xfd/0x1b0 [rtw89_core (HASH:1400 5)] rtw89_core_rx+0x43a/0x980 [rtw89_core (HASH:1400 5)] | |||||
| CVE-2025-38645 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Check device memory pointer before usage Add a NULL check before accessing device memory to prevent a crash if dev->dm allocation in mlx5_init_once() fails. | |||||
| CVE-2025-38644 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject TDLS operations when station is not associated syzbot triggered a WARN in ieee80211_tdls_oper() by sending NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT, before association completed and without prior TDLS setup. This left internal state like sdata->u.mgd.tdls_peer uninitialized, leading to a WARN_ON() in code paths that assumed it was valid. Reject the operation early if not in station mode or not associated. | |||||
| CVE-2025-38642 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix WARN_ON for monitor mode on some devices On devices without WANT_MONITOR_VIF (and probably without channel context support) we get a WARN_ON for changing the per-link setting of a monitor interface. Since we already skip AP_VLAN interfaces and MONITOR with WANT_MONITOR_VIF and/or NO_VIRTUAL_MONITOR should update the settings, catch this in the link change code instead of the warning. | |||||
| CVE-2025-38641 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure Avoid potential NULL pointer dereference by checking the return value of kmalloc and handling allocation failure properly. | |||||
| CVE-2025-38638 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: add a retry logic in net6_rt_notify() inet6_rt_notify() can be called under RCU protection only. This means the route could be changed concurrently and rt6_fill_node() could return -EMSGSIZE. Re-size the skb when this happens and retry, removing one WARN_ON() that syzbot was able to trigger: WARNING: CPU: 3 PID: 6291 at net/ipv6/route.c:6342 inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342 Modules linked in: CPU: 3 UID: 0 PID: 6291 Comm: syz.0.77 Not tainted 6.16.0-rc7-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342 Code: fc ff ff e8 6d 52 ea f7 e9 47 fc ff ff 48 8b 7c 24 08 4c 89 04 24 e8 5a 52 ea f7 4c 8b 04 24 e9 94 fd ff ff e8 9c fe 84 f7 90 <0f> 0b 90 e9 bd fd ff ff e8 6e 52 ea f7 e9 bb fb ff ff 48 89 df e8 RSP: 0018:ffffc900035cf1d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffc900035cf540 RCX: ffffffff8a36e790 RDX: ffff88802f7e8000 RSI: ffffffff8a36e9d4 RDI: 0000000000000005 RBP: ffff88803c230f00 R08: 0000000000000005 R09: 00000000ffffffa6 R10: 00000000ffffffa6 R11: 0000000000000001 R12: 00000000ffffffa6 R13: 0000000000000900 R14: ffff888032ea4100 R15: 0000000000000000 FS: 00007fac7b89a6c0(0000) GS:ffff8880d6a20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fac7b899f98 CR3: 0000000034b3f000 CR4: 0000000000352ef0 Call Trace: <TASK> ip6_route_mpath_notify+0xde/0x280 net/ipv6/route.c:5356 ip6_route_multipath_add+0x1181/0x1bd0 net/ipv6/route.c:5536 inet6_rtm_newroute+0xe4/0x1a0 net/ipv6/route.c:5647 rtnetlink_rcv_msg+0x95e/0xe90 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x58d/0x850 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 | |||||
| CVE-2025-38637 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: skbprio: Remove overly strict queue assertions In the current implementation, skbprio enqueue/dequeue contains an assertion that fails under certain conditions when SKBPRIO is used as a child qdisc under TBF with specific parameters. The failure occurs because TBF sometimes peeks at packets in the child qdisc without actually dequeuing them when tokens are unavailable. This peek operation creates a discrepancy between the parent and child qdisc queue length counters. When TBF later receives a high-priority packet, SKBPRIO's queue length may show a different value than what's reflected in its internal priority queue tracking, triggering the assertion. The fix removes this overly strict assertions in SKBPRIO, they are not necessary at all. | |||||
| CVE-2025-38636 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: rv: Use strings in da monitors tracepoints Using DA monitors tracepoints with KASAN enabled triggers the following warning: BUG: KASAN: global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 Read of size 32 at addr ffffffffaada8980 by task ... Call Trace: <TASK> [...] do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 ? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10 ? trace_event_sncid+0x83/0x200 trace_event_sncid+0x163/0x200 [...] The buggy address belongs to the variable: automaton_snep+0x4e0/0x5e0 This is caused by the tracepoints reading 32 bytes __array instead of __string from the automata definition. Such strings are literals and reading 32 bytes ends up in out of bound memory accesses (e.g. the next automaton's data in this case). The error is harmless as, while printing the string, we stop at the null terminator, but it should still be fixed. Use the __string facilities while defining the tracepoints to avoid reading out of bound memory. | |||||
| CVE-2025-38635 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: davinci: Add NULL check in davinci_lpsc_clk_register() devm_kasprintf() returns NULL when memory allocation fails. Currently, davinci_lpsc_clk_register() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensuring no resources are left allocated. | |||||
| CVE-2025-38634 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-charger: Fix null check for power_supply_get_by_name In the cpcap_usb_detect() function, the power_supply_get_by_name() function may return `NULL` instead of an error pointer. To prevent potential null pointer dereferences, Added a null check. | |||||
| CVE-2025-38633 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: mark K1 pll1_d8 as critical The pll1_d8 clock is enabled by the boot loader, and is ultimately a parent for numerous clocks, including those used by APB and AXI buses. Guodong Xu discovered that this clock got disabled while responding to getting -EPROBE_DEFER when requesting a reset controller. The needed clock (CLK_DMA, along with its parents) had already been enabled. To respond to the probe deferral return, the CLK_DMA clock was disabled, and this led to parent clocks also reducing their enable count. When the enable count for pll1_d8 was decremented it became 0, which caused it to be disabled. This led to a system hang. Marking that clock critical resolves this by preventing it from being disabled. Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to be supplied for a CCU_FACTOR_GATE clock. | |||||
| CVE-2025-38632 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pinmux: fix race causing mux_owner NULL with active mux_usecount commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned. | |||||
| CVE-2025-38631 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: imx95-blk-ctl: Fix synchronous abort When enabling runtime PM for clock suppliers that also belong to a power domain, the following crash is thrown: error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP Workqueue: events_unbound deferred_probe_work_func pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : clk_mux_get_parent+0x60/0x90 lr : clk_core_reparent_orphans_nolock+0x58/0xd8 Call trace: clk_mux_get_parent+0x60/0x90 clk_core_reparent_orphans_nolock+0x58/0xd8 of_clk_add_hw_provider.part.0+0x90/0x100 of_clk_add_hw_provider+0x1c/0x38 imx95_bc_probe+0x2e0/0x3f0 platform_probe+0x70/0xd8 Enabling runtime PM without explicitly resuming the device caused the power domain cut off after clk_register() is called. As a result, a crash happens when the clock hardware provider is added and attempts to access the BLK_CTL register. Fix this by using devm_pm_runtime_enable() instead of pm_runtime_enable() and getting rid of the pm_runtime_disable() in the cleanup path. | |||||
| CVE-2025-38630 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: imxfb: Check fb_add_videomode to prevent null-ptr-deref fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot allocate a struct fb_modelist. If that happens, the modelist stays empty but the driver continues to register. Add a check for its return value to prevent poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev: Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var"). | |||||
| CVE-2025-38629 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb: scarlett2: Fix missing NULL check scarlett2_input_select_ctl_info() sets up the string arrays allocated via kasprintf(), but it misses NULL checks, which may lead to NULL dereference Oops. Let's add the proper NULL check. | |||||
| CVE-2025-38628 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: Fix release of uninitialized resources on error path The commit in the fixes tag made sure that mlx5_vdpa_free() is the single entrypoint for removing the vdpa device resources added in mlx5_vdpa_dev_add(), even in the cleanup path of mlx5_vdpa_dev_add(). This means that all functions from mlx5_vdpa_free() should be able to handle uninitialized resources. This was not the case though: mlx5_vdpa_destroy_mr_resources() and mlx5_cmd_cleanup_async_ctx() were not able to do so. This caused the splat below when adding a vdpa device without a MAC address. This patch fixes these remaining issues: - Makes mlx5_vdpa_destroy_mr_resources() return early if called on uninitialized resources. - Moves mlx5_cmd_init_async_ctx() early on during device addition because it can't fail. This means that mlx5_cmd_cleanup_async_ctx() also can't fail. To mirror this, move the call site of mlx5_cmd_cleanup_async_ctx() in mlx5_vdpa_free(). An additional comment was added in mlx5_vdpa_free() to document the expectations of functions called from this context. Splat: mlx5_core 0000:b5:03.2: mlx5_vdpa_dev_add:3950:(pid 2306) warning: No mac address provisioned? ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2306 at kernel/workqueue.c:4207 __flush_work+0x9a/0xb0 [...] Call Trace: <TASK> ? __try_to_del_timer_sync+0x61/0x90 ? __timer_delete_sync+0x2b/0x40 mlx5_vdpa_destroy_mr_resources+0x1c/0x40 [mlx5_vdpa] mlx5_vdpa_free+0x45/0x160 [mlx5_vdpa] vdpa_release_dev+0x1e/0x50 [vdpa] device_release+0x31/0x90 kobject_cleanup+0x37/0x130 mlx5_vdpa_dev_add+0x327/0x890 [mlx5_vdpa] vdpa_nl_cmd_dev_add_set_doit+0x2c1/0x4d0 [vdpa] genl_family_rcv_msg_doit+0xd8/0x130 genl_family_rcv_msg+0x14b/0x220 ? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa] genl_rcv_msg+0x47/0xa0 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x27b/0x3b0 netlink_sendmsg+0x1f7/0x430 __sys_sendto+0x1fa/0x210 ? ___pte_offset_map+0x17/0x160 ? next_uptodate_folio+0x85/0x2b0 ? percpu_counter_add_batch+0x51/0x90 ? filemap_map_pages+0x515/0x660 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x7b/0x2c0 ? do_read_fault+0x108/0x220 ? do_pte_missing+0x14a/0x3e0 ? __handle_mm_fault+0x321/0x730 ? count_memcg_events+0x13f/0x180 ? handle_mm_fault+0x1fb/0x2d0 ? do_user_addr_fault+0x20c/0x700 ? syscall_exit_work+0x104/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0c25b0feca [...] ---[ end trace 0000000000000000 ]--- | |||||