Total
419407 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-81032 | 2026-09-24 | N/A | 9.8 CRITICAL | ||
| NebulaGraph exposes its runtime configuration over an unauthenticated HTTP service. Each daemon starts the web service defined in src/webservice/WebService.cpp, whose bind address defaults to all interfaces, and registers routes for reading and writing gflags alongside status and statistics. Neither the service nor its router carries any authentication, token check or address restriction. The read route returns the daemon's full set of runtime flag values, which includes the configured certificate, key and certificate-authority paths, the password file path, data directories and the transport-security enable flags. The write route parses a supplied map and applies each entry through the gflags runtime setter, so a caller able to reach the port can change the daemon's behaviour without restarting it, including disabling the transport-security flags, redirecting log files and altering flags such as failed_login_attempts and password_lock_time_in_secs. Public reports of this endpoint describe a single name, enable_authorize, being refused by the handler; at release 3.8.0 that refusal is not present and the handler applies every name it is given. | |||||
| CVE-2026-13248 | 2026-09-24 | N/A | 8.8 HIGH | ||
| An Authenticated Remote Code Execution via Arbitrary File Write in the Intermec Fingerprint Command Interface vulnerability in the web management interface in Honeywell PD45 Industrial Printer version F10.19.010040, allows an authenticated user with access to the admin or itadmin account to submit commands written in the Intermec Fingerprint programming language directly to the printer ’s internal command interpreter. An attacker could potentially exploit this vulnerability, leading to the execution of malicious files and commands. Honeywell also recommends updating to the most recent firmware version, Honeywell PD45 Industrial Printer firmware F10.22.030745, which includes a fix for this vulnerability. | |||||
| CVE-2026-79787 | 2026-09-24 | N/A | 9.8 CRITICAL | ||
| Alluxio's S3 REST proxy fails to verify AWS Signature Version 4 signatures in its default configuration, allowing unauthenticated attackers to spoof user identity. Attackers can extract usernames from unsigned Authorization headers and impersonate any user, including service accounts, to read, write, and delete arbitrary data. | |||||
| CVE-2026-89259 | 2026-09-24 | N/A | 9.8 CRITICAL | ||
| Hugo is a static site generator. From v0.161.0, Hugo executes Node tools under Node's permission model, but TailwindCSS — included in the default security.exec.allow list — requires a highly permissive configuration (--allow-addons, --allow-child-process, --allow-worker). As a result, the restrictions intended by the fix for GHSA-x597-9fr4-5857 could still be bypassed, allowing a Node tool invoked during a build to read and write files outside the project's working directory. Affected versions are those after v0.43; the issue was fixed in v0.165.0 by removing tailwindcss from the default security.exec.allow list. Users who do not use TailwindCSS, or who only build trusted sites, are not affected. As a workaround, users can define a restrictive security.exec.allow list in hugo.toml. | |||||
| CVE-2026-74232 | 2026-09-24 | N/A | 9.8 CRITICAL | ||
| Zbtlink L3_V2_8 firmware 3.0.0.4.528, Zbtlink WE826-T2 firmware 19.1101, Zbtlink ZBT-7628 firmware 1.0.0.2.007, Zbtlink ZBT-ZBT7621 firmware 1.0.0.3.001, MoreQuick MQAC-7620, MQAC-7620A, MQAP-7620, MQAP-7620A, and MQAP-7628 firmware 1.0.0.2.000, AP522 firmware 1.0.0.2.014, AP7628 and HC5661A firmware 3.0.0.4.380, APG721B firmware 19.0809, HK300 firmware 1.0.0.2.032, and MAP-N10 firmware 1.0.0.2.044 ship a backdoor command-and-control implant (yunmgrd) reachable over an unauthenticated cleartext UDP channel to a hardcoded C2 server. A remote unauthenticated attacker on the network path can hijack the channel and execute arbitrary commands as root. The attacker can also modify DNS entries, exfiltrate PPPoE credentials, and open reverse SSH tunnels. | |||||
| CVE-2023-54398 | 2026-09-24 | N/A | 9.8 CRITICAL | ||
| Yonyou U8 Cloud contains an unauthenticated Java deserialization vulnerability in the nc.impl.pub.filesystem.FileManageServlet component that allows remote unauthenticated attackers to execute arbitrary OS commands by sending a serialized payload via POST request. Attackers can exploit the doAction method, which passes raw HTTP request body data directly to ObjectInputStream.readObject() without filtering, to achieve remote code execution. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-02-13. | |||||
| CVE-2026-81097 | 2026-09-24 | N/A | 8.4 HIGH | ||
| The execute_ruby tool is documented as a read-only Ruby sandbox and is enforced by a pattern denylist together with replacements for the process-spawning methods on Kernel. The pseudo-terminal library's spawn entry points are neither in the denylist nor replaced, so a normal tool call could reach them and start a shell, executing commands as the account running the server and outside the guarded methods. The denylist was introduced with the tool in 1.4.0 and never covered those entry points through 1.6.0. Version 1.6.1 restricts the requires the sandbox permits to a data-only list and blocks dynamic dispatch to execution entry points; 2.0.0 removes the tool. | |||||
| CVE-2026-13249 | 2026-09-24 | N/A | 9.8 CRITICAL | ||
| An unauthenticated Remote Code Execution via Arbitrary File Upload vulnerability in the web management interface in Honeywell PD45 Industrial Printer version F10.19.010040, allows upload of attacker controlled files without requiring authentication. An attacker could potentially exploit this vulnerability, leading to the execution of malicious files and commands. Honeywell also recommends updating to the most recent firmware version, Honeywell PD45 Industrial Printer firmware F10.22.030745, which includes a fix for this vulnerability. | |||||
| CVE-2026-26211 | 2026-09-24 | N/A | 4.8 MEDIUM | ||
| Ekushey Project Manager CRM stores the administrator-configured system name and writes it to the login page without output encoding. The value is emitted in three places on that page: the content attribute of the description meta element, the title element, and the text of an h4 element in the page header. The h4 occurrence is parsed as markup, so HTML placed in the system name field is rendered as markup and any event handler it carries runs. The login page is served without authentication, so the stored value executes in the browser of every visitor who loads it, including visitors who are not signed in, within the origin that serves the login form and alongside the credential fields on it. Storing the value requires an administrator session; the resulting script runs for unauthenticated visitors and persists until the setting is changed. | |||||
| CVE-2026-80138 | 2026-09-24 | N/A | 9.8 CRITICAL | ||
| ClipBucket V5's web installer fails to properly validate or escape the php_cli_filepath parameter before passing it to shell execution. Unauthenticated attackers can submit a crafted POST request to the installer with a malicious php_cli_filepath value to execute arbitrary commands as the web server user. | |||||
| CVE-2026-80189 | 2026-09-24 | N/A | 6.5 MEDIUM | ||
| LeafWiki extracts an uploaded ZIP archive without limiting how much data it will write. ZipExtractor.ExtractToDir in internal/importer/zip_extractor.go opens each entry and copies it to the destination with io.Copy, which runs to the end of the decompressed stream, so only the size of the uploaded archive is bounded and the size it expands to is not. The import route that reaches this code requires the Editor or Admin role, and the upload itself is capped at 500 MiB compressed. Because a ZIP entry can compress at a very high ratio, an archive well inside that cap can expand to hundreds of gigabytes as it is written out. The extraction directory defaults to a location under the operating system temporary directory, so the written data consumes the disk backing that path, which on a tmpfs-backed temporary directory is memory. A user holding the Editor role can therefore exhaust the storage the service depends on and keep it from serving, using far more resource than the upload limit alone would permit. | |||||
| CVE-2026-81664 | 2026-09-24 | N/A | 5.3 MEDIUM | ||
| The OpenFaaS gateway registers GET /system/telemetry in gateway/main.go and, when basic_auth is enabled, wraps each administrative /system/* handler in auth.DecorateWithBasicAuth. TelemetryHandler was left out of that wrap block from 0.27.11, which introduced the route, until 0.27.14, which added it. On an affected gateway the route therefore reaches the forwarding proxy with no credential check and returns whatever the configured provider serves for /system/telemetry, so any client that can reach the gateway port can read the provider's telemetry regardless of the basic_auth setting. The exposed content depends on the provider, and covers resource and invocation metrics for faasd and pod or cluster state for faas-netes. | |||||
| CVE-2026-81334 | 2026-09-24 | N/A | 6.1 MEDIUM | ||
| darknet subscripts its layer array with an index taken from a configuration file without checking it against the array's length. The array is allocated in src-lib/darknet_network.cpp as xcalloc(net.n, sizeof(Darknet::Layer)), sized to exactly the number of layer sections the file declares. The shortcut, scale_channels and sam sections supply that index through their from field and the route section through its layers field, and parse_shortcut_section in src-lib/darknet_cfg.cpp reads net.layers[index].outputs with no bounds check, which reads past the allocation. The dispatch loop in create_network then reuses the same index to assign net.layers[l.index].use_bin_output and net.layers[l.index].keep_delta_gpu, writing past the allocation at an offset the file controls, with a fixed one-byte value. Parsing a crafted configuration file is sufficient: the parse runs before any weights file is opened and needs no non-default option, so the result is a reliable crash and a write whose location, though not its value, is chosen by whoever supplied the file. | |||||
| CVE-2026-81035 | 2026-09-24 | N/A | 8.1 HIGH | ||
| Midday allows any member of a team to delete it. The delete procedure in apps/api/src/trpc/routers/team.ts authorises the caller with the team-access helper, which returns true for every row in the team-membership table irrespective of the role it records, and the data-layer function it calls re-checks the same helper and nothing else. The neighbouring procedures that remove or update a member in the same router each resolve the caller's role and refuse the request unless it is owner, so the check exists in the file and is not applied to deletion. Member is the role an invited user receives, so any invitee can remove the team and every record scoped to it, and the deletion enqueues the cleanup job with the stored bank-connection tokens, which the job then uses against the connected providers. The update procedure in the same router carries no role check either. | |||||
| CVE-2026-12559 | 2026-09-24 | N/A | N/A | ||
| A Stored Cross-Site Scripting (XSS) vulnerability has been identified in OpenText Vendor Invoice Management for SAP Solutions Capture Validation application. Under certain conditions, this issue could allow execution of unauthorized script content in a user's browser, potentially impacting confidentiality and integrity of information processed through the application. | |||||
| CVE-2026-85693 | 2026-09-24 | N/A | 6.5 MEDIUM | ||
| Chatbot UI contains an authorization bypass vulnerability in the retrieval endpoint that allows authenticated attackers to access private file content belonging to other users by supplying arbitrary file UUIDs. The endpoint uses a service-role Supabase client that bypasses row-level security and fails to validate file ownership, enabling attackers to retrieve indexed content chunks from victim files through crafted POST requests. | |||||
| CVE-2026-91988 | 2026-09-24 | N/A | 8.1 HIGH | ||
| atomic-agents-stack before 1.1.0 accepts cleartext HTTP schemes in the HTTP MCP server-registry backend factory, allowing network man-in-the-middle attackers to rewrite catalog responses. Attackers can inject arbitrary command and argument values that are spawned as local subprocesses by MCPClientPool to achieve code execution on the agent host. | |||||
| CVE-2026-53992 | 2026-09-24 | N/A | 6.1 MEDIUM | ||
| ProjectSend r2029 contains a reflected cross-site scripting vulnerability in thumbnails-regenerate.php that allows remote attackers to inject arbitrary HTML and JavaScript by supplying unsanitized values in the start_date and end_date GET parameters, which are echoed unescaped into HTML attribute values. Attackers can craft a malicious URL that, when followed by an authenticated victim with edit_settings permissions, executes injected scripts in the application origin to steal session cookies or perform unauthorized actions including user management, file management, and application settings changes. | |||||
| CVE-2026-91777 | 2026-09-24 | N/A | 7.5 HIGH | ||
| Forward-reference completion for @JsonIdentityInfo object IDs in FasterXML jackson-databind performs a linear scan of the pending-reference accumulator for every resolved ID. The affected paths are CollectionDeserializer.CollectionReferringAccumulator.resolveForwardReference() and the equivalent implementation in MapDeserializer. When a document first creates N unresolved object-ID references in an identity-enabled collection or map and then defines those same IDs in reverse order, completion performs on the order of N * (N + 1) / 2 identity comparisons, so a shallow document whose size grows linearly causes quadratic CPU work during deserialization. The reporter instrumented equals() calls on the ID class and measured exactly 2,003,000 comparisons at N = 2,000, against zero comparisons in the pending-reference lookup path for an equally sized control in which every reference was already resolved. The input requires no deep nesting and no syntactically unusual JSON. Exploitation requires an application that deserializes attacker-influenced JSON into an identity-enabled collection or map. The fix replaces the repeated linear lookup with a keyed pending-reference structure. | |||||
| CVE-2026-91997 | 2026-09-24 | N/A | 5.3 MEDIUM | ||
| evolution-api through 2.3.7 contains an incorrect array comparison in the metricsIPWhitelist middleware that always evaluates to false, allowing unauthenticated access to the /metrics endpoint. Attackers can bypass IP whitelist restrictions to access sensitive metrics disclosing server version, database client name, configured server URL, and WhatsApp instance details. | |||||