Total
395841 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-43698 | 1 Apple | 1 Macos | 2026-09-14 | N/A | 7.8 HIGH |
| An injection issue was addressed with improved validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.7. An app may be able to gain root privileges. | |||||
| CVE-2026-43661 | 1 Apple | 5 Ipados, Iphone Os, Macos and 2 more | 2026-09-14 | N/A | 7.5 HIGH |
| A buffer overflow issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.5 and iPadOS 26.5, iOS 26.7 and iPadOS 26.7, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.5, tvOS 26.5, watchOS 26.5. Processing a maliciously crafted image may corrupt process memory. | |||||
| CVE-2026-3805 | 1 Haxx | 1 Curl | 2026-09-14 | N/A | 7.5 HIGH |
| When doing a second SMB request to the same host again, curl would wrongly use a data pointer pointing into already freed memory. | |||||
| CVE-2026-28969 | 1 Apple | 6 Ipados, Iphone Os, Macos and 3 more | 2026-09-14 | N/A | 7.5 HIGH |
| A use after free issue was addressed with improved memory management. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, iOS 27 and iPadOS 27, macOS Golden Gate 27, macOS Sequoia 15.7.7, macOS Sequoia 15.8, macOS Sonoma 14.8.7, macOS Tahoe 26.5, macOS Tahoe 26.7, tvOS 26.5, tvOS 27, visionOS 26.5, visionOS 27, watchOS 26.5, watchOS 27. An app may be able to cause unexpected system termination. | |||||
| CVE-2025-9086 | 2 Debian, Haxx | 2 Debian Linux, Curl | 2026-09-14 | N/A | 7.5 HIGH |
| 1. A cookie is set using the `secure` keyword for `https://target` 2. curl is redirected to or otherwise made to speak with `http://target` (same hostname, but using clear text HTTP) using the same cookie set 3. The same cookie name is set - but with only a slash as path (`path="/"`). Since this site is not secure, the cookie *should* be ignored. 4. A bug in the path comparison logic makes curl read outside a heap buffer boundary The bug either causes a crash or it potentially makes the comparison come to the wrong conclusion and lets the clear-text site override the contents of the secure cookie, contrary to expectations and depending on the memory contents immediately following the single-byte allocation that holds the path. The presumed and correct behavior would be to plainly ignore the second set of the cookie since it was already set as secure on a secure host so overriding it on an insecure host should not be okay. | |||||
| CVE-2026-15892 | 2026-09-14 | N/A | 5.3 MEDIUM | ||
| The mcumgr SMP settings-management group handlers settings_mgmt_read(), settings_mgmt_write(), and settings_mgmt_delete() in subsys/mgmt/mcumgr/grp/settings_mgmt/src/settings_mgmt.c allocate a key_name buffer (and, for read, a data buffer) via k_malloc() when CONFIG_MCUMGR_GRP_SETTINGS_BUFFER_TYPE_HEAP is enabled, relying on the end: label to k_free() them. When CONFIG_MCUMGR_GRP_SETTINGS_ACCESS_HOOK is also enabled and the application access hook rejects a request by returning status MGMT_CB_ERROR_RC, the handler executed return ret_rc; directly, bypassing end: and leaking the heap allocation on every rejected request. The settings handlers are reachable over the unauthenticated SMP transport (Bluetooth LE, UART, or UDP, depending on product configuration). The access hook is the mechanism applications use to deny unauthorized settings access, and MGMT_CB_ERROR_RC is a common rejection style, so an attacker who can send settings read/write/delete commands that the hook rejects triggers a heap leak on each attempt. Because the leaked memory is never reclaimed until reboot, a sustained stream of rejected requests monotonically exhausts the kernel heap until k_malloc() fails, denying mcumgr service and impacting any other heap consumer on the device — a denial of service. The impact is availability-only; there is no memory corruption or information disclosure. Only configurations that select the heap buffer type, enable the access hook, and register a hook that returns MGMT_CB_ERROR_RC are affected (the default stack buffer type cannot leak). | |||||
| CVE-2026-15924 | 2026-09-14 | N/A | 5.9 MEDIUM | ||
| Zephyr's TLS socket layer in subsys/net/lib/sockets/sockets_tls.c keeps a single process-global array, client_cache, of cached client sessions that is shared by every TLS socket context. The functions that mutate and read it — tls_session_save(), tls_session_get(), tls_session_cache_reset(), and the settings restore handler — allocate, free, and dereference each entry's heap buffer (entry->session). Before the fix these accesses were serialized only by the per-socket context mutex ctx->lock (assigned per socket in ctx_set_lock()), which provides no mutual exclusion between different sockets touching the shared cache. Because CONFIG_NET_SOCKETS_TLS_MAX_CLIENT_SESSION_COUNT defaults to 1, any two concurrent client sockets contend for the same slot. A thread in tls_session_get() reading entry->session inside mbedtls_ssl_session_load() can run concurrently with another thread in tls_session_save() that selects the same entry for reuse and executes mbedtls_free(entry->session) before reallocating — a use-after-free read, and a double-free when two saves evict the same entry. Both corrupt the mbedTLS heap. The cache is reached on ordinary client paths: at connect time via tls_session_store()/tls_session_restore(), and (on main) whenever a TLS 1.3 session ticket arrives during recv()/poll() via tls_session_store_current(). Exploitation requires an application that opts into per-socket client session caching (the TLS_SESSION_CACHE socket option, off by default) and runs concurrent TLS client connections on multiple threads; the timing that opens the window is influenced by the remote peer(s), so a malicious or compromised server can raise session-ticket frequency to widen it. The reliably-demonstrable impact is memory corruption leading to a crash or heap corruption (denial of service). The fix adds a dedicated session_cache_lock mutex taken across every accessor of client_cache, serializing all reads and frees and closing the race. | |||||
| CVE-2026-16147 | 2026-09-14 | N/A | 6.8 MEDIUM | ||
| The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints. In work_handler_out() the active transfer buffer is obtained with udc_buf_peek() (which does not dequeue it); when a full max-packet-size packet arrives but the buffer still has tailroom (the transfer is not yet complete), the pre-fix code both re-arms the endpoint to keep filling that same buf via work_handler_xfer_continue() and simultaneously hands the same, still-being-filled buffer to the upper stack with udc_submit_ep_event(). Because udc_submit_ep_event() transfers ownership of the buffer to the USB device stack (usbd_event_carrier() appends &buf->node to uds_ctx->ep_events, after which the class handler processes and net_buf_unref()s it), the driver continues to DMA subsequent host-controlled OUT packets into a buffer the upper stack may already have freed and recycled — a use-after-free write. In addition, since the buffer was never dequeued, the completing packet runs udc_buf_get() on the same object and submits it a second time, appending &buf->node to the event slist twice (singly-linked-list corruption) and causing a double net_buf_unref(). The IT82xx2 is a USB peripheral controller, so the untrusted USB host controls OUT-transfer packetization and can force this path against any non-control OUT endpoint whose queued buffer exceeds one packet — an ordinary bulk/interrupt pattern. The driver and USB device stack run in kernel context above the external host, giving the host a device-side kernel heap-corruption primitive: a reliable denial of service and, because the written bytes are attacker-controlled, plausible corruption of adjacent net_buf pool memory. The vector is physical (USB attach). The fix defers submission until the buffer is completely filled and lets xfer_work_handler() drive continuation, so each OUT buffer is submitted to the upper stack exactly once. | |||||
| CVE-2026-15923 | 2026-09-14 | N/A | 4.6 MEDIUM | ||
| The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func->cis.max_blk_size) as the per-iteration step. The value func->cis.max_blk_size is decoded directly from the SDIO card's CIS FUNCE tuple in sdio_decode_cis() and is not validated. When a card reports a maximum block size of zero, size is always 0, remaining never decreases, and the loop spins forever. The loop is reached from the public SDIO client API used by drivers, including sdio_read_fifo(), sdio_write_fifo(), and the incrementing register read/write helpers, each of which enters the loop while holding the per-card mutex func->card->lock. A card advertising max_blk_size == 0 therefore hangs the calling thread permanently on its first non-block-aligned transfer and never releases the mutex, denying service to the SDIO peripheral (and any subsystem such as Wi-Fi that depends on it) until the device is reset. The malicious value must come from the SDIO card itself, so the defect is exploitable where a removable SDIO/combo card slot lets an attacker insert a crafted or malfunctioning card (a physical attack vector); on boards with a soldered SDIO peripheral it is not attacker-influenceable. There is no memory-safety, confidentiality, or integrity impact — only a permanent availability loss. The fix returns -EIO when func->cis.max_blk_size is zero, before the loop is entered. | |||||
| CVE-2026-16148 | 2026-09-14 | N/A | 4.6 MEDIUM | ||
| The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is active: the interrupt handler reschedules it on every SOF frame and suspended_handler() reschedules itself, so its timeout node is normally linked in the kernel timeout list / a workqueue pending queue. k_work_init_delayable() (kernel/work.c) unconditionally overwrites the entire k_work_delayable structure, including its timeout and queue linkage, with no busy check. Because it82xx2_disable() does not cancel the work, a normal disable-then-enable cycle re-runs api->enable() (udc_enable() only rejects a redundant enable, not a re-enable after disable) and re-initializes the still-pending work in place, corrupting the kernel timeout/workqueue linked lists and causing a kernel panic. An external USB host — for example a host performing USB DFU detach (dfu-util --detach) or forcing repeated attach/reset/re-enumeration — drives the udc_disable()/udc_enable() transitions and controls suspend/resume timing, so it can arrange for the suspend work to be pending across a re-enable. This yields an unauthenticated denial of service (kernel panic) reachable across the USB boundary from a removable, physically-connected host, with no confidentiality or integrity impact demonstrated. The fix moves the k_work_init_delayable() call into the one-time preinit function so the work is initialized exactly once, eliminating the re-initialization of an in-use item. | |||||
| CVE-2026-15893 | 2026-09-14 | N/A | 6.5 MEDIUM | ||
| net_if_ipv6_calc_reachable_time() in subsys/net/ip/net_if.c derives a randomized ND reachable time from ipv6->base_reachable_time as min_reachable + sys_rand32_get() % (max_reachable - min_reachable), where min_reachable = base/2 and max_reachable = 3*base/2 using integer division. When base_reachable_time is 1, both min_reachable and the modulus collapse so the function returns 0, and net_if_ipv6_set_reachable_time() stores that 0 into ipv6->reachable_time. The base_reachable_time is attacker-controlled: handle_ra_input() in subsys/net/ip/ipv6_nbr.c accepts the Reachable Time field of an incoming Router Advertisement whenever it is nonzero and <= MAX_REACHABLE_TIME, so a single unauthenticated, link-local RA carrying a Reachable Time of 1 drives the computed reachable time to 0. Router Advertisements are unauthenticated by default and require only adjacency to the target link. When a neighbor is subsequently confirmed reachable, net_ipv6_nbr_set_reachable_timer() reads the value and executes NET_ASSERT(time, "Zero reachable timeout!"). On builds with CONFIG_ASSERT enabled this triggers a fatal kernel assertion — a remote denial of service; on builds without assertions the reachable timer is armed with K_MSEC(0) and fires immediately, forcing reachable neighbors into perpetual re-solicitation (STALE), degrading Neighbor Discovery. The impact is limited to availability; there is no memory-safety, confidentiality, or integrity consequence. | |||||
| CVE-2026-15891 | 2026-09-14 | N/A | 7.5 HIGH | ||
| The MQTT-SN client keepalive handler process_ping() in subsys/net/lib/mqtt_sn/mqtt_sn.c removes the gateway record after PINGREQ retries are exhausted. It invoked SYS_SLIST_PEEK_HEAD_CONTAINER(&client->gateways, gw, next) but discarded the result. That macro is a pure expression that does not assign to gw, so gw retained its NULL initializer regardless of the list contents. The code then dereferences the NULL gw (gw->gw_id) and passes it to mqtt_sn_gw_destroy(), reaching k_mem_slab_free(&gateways, NULL). With CONFIG_MEM_SLAB_POINTER_VALIDATE enabled this triggers k_panic(); in the default configuration it performs a write through the NULL pointer ((char )mem = slab->free_list;) and corrupts the slab free list. The outcome is a crash/kernel panic or, on targets where address 0 is writable, silent memory-allocator corruption. The vulnerable branch runs whenever the connected MQTT-SN gateway fails to answer keepalive PINGREQs for the configured number of retries. This condition is controlled by the remote peer: a malicious or compromised gateway, or an on-path/adjacent attacker that advertises itself as a gateway and then stops responding (or blackholes the real gateway's PINGRESPs), forces the client into the defect. MQTT-SN runs over UDP and no authentication is required. The impact is a remotely triggerable denial of service (availability) of the affected MQTT-SN client; there is no attacker-controlled data written. The sibling remover process_advertise() uses SYS_SLIST_FOR_EACH_CONTAINER_SAFE and is not affected. The fix assigns the macro's return value to gw. | |||||
| CVE-2026-87842 | 2026-09-14 | N/A | 7.5 HIGH | ||
| The Zonify WordPress plugin before 1.0.5 does not perform any capability or authentication check before returning the site's stored account login token, allowing unauthenticated attackers to retrieve it and authenticate to the site owner's linked service account. | |||||
| CVE-2026-85129 | 2026-09-14 | N/A | 8.8 HIGH | ||
| The Hoo Companion WordPress plugin 1.0.2 does not have any authorisation or validation checks in one of its import features, and does not sanitise the data submitted to it before storing it as the active theme's settings, allowing unauthenticated attackers to inject arbitrary web scripts which will execute for anyone viewing the site, including administrators. The same request destroys the site's existing theme settings. | |||||
| CVE-2026-87894 | 2026-09-14 | N/A | 5.3 MEDIUM | ||
| The Rox Appointment Booking WordPress plugin before 1.2.3 does not perform any authorization check on the endpoint that returns a booking's confirmation details, and each booking is addressed by a sequential numeric identifier, allowing unauthenticated attackers to read any customer's name, email, phone, booking details and payment status by enumerating that identifier. | |||||
| CVE-2026-82847 | 2026-09-14 | N/A | 6.8 MEDIUM | ||
| The Masteriyo LMS WordPress plugin before 3.4.1 does not sanitise and escape one of its course fields before outputting it back in the course editor, allowing users with the instructor role to perform Stored Cross-Site Scripting attacks against higher privileged users such as administrators. | |||||
| CVE-2026-88802 | 2026-09-14 | N/A | 7.5 HIGH | ||
| The MDJM Event Management WordPress plugin before 1.7.8.5 and the Mobile Events Manager WordPress plugin through 1.4.8.3 do not check a capability, a nonce or the type of the record before permanently deleting the post identified in a request to their playlist entry removal, allowing unauthenticated attackers to destroy arbitrary posts, pages and media attachments, bypassing the trash. | |||||
| CVE-2026-75800 | 2026-09-14 | N/A | 9.8 CRITICAL | ||
| The Frontegg SAML SSO WordPress plugin through 1.0.1 does not verify the signature or issuer of SAML authentication responses before establishing a session, allowing unauthenticated attackers to log in as any user, including administrators, as well as to create arbitrary accounts. | |||||
| CVE-2026-84099 | 2026-09-14 | N/A | 8.1 HIGH | ||
| The wpstorecart WordPress plugin through 5.0.7 does not prevent direct, unauthenticated access to a bundled add-on that deserializes user-supplied input without restricting the permitted classes, allowing unauthenticated attackers to inject arbitrary PHP objects, which may be escalated further when a suitable gadget chain is present on the site. | |||||
| CVE-2026-87918 | 2026-09-14 | N/A | 5.3 MEDIUM | ||
| The WPBot WordPress plugin before 8.5.7 does not perform any authorization or nonce check on several AJAX actions that relay prompts to its configured AI providers, allowing unauthenticated attackers to make those third-party API calls, and consume the associated cost, using the site's own configured API keys. | |||||