Total
418144 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-85496 | 2026-09-25 | N/A | 8.8 HIGH | ||
| The Botslab G980H dash camera firmware generates session identifiers using a small sequential value space rather than a suitably unpredictable source. An unauthenticated attacker with adjacent network access and knowledge that an active session exists could potentially determine a valid session identifier and use it to bypass intended authorization controls. | |||||
| CVE-2026-85491 | 2026-09-25 | N/A | 8.8 HIGH | ||
| Catalyst::Seal versions before 0.03 for Perl allow one request to disable a path or route a later one past an authorization check via a dispatch memo keyed on the request path alone. Catalyst::Seal replaces the dispatcher's prepare_action with a version that memoises how a path resolved: which dispatch type matched, at which level, and what was left over as arguments. The key is the request path and nothing else. Action roles that match on the method, content type, scheme or query make that resolution depend on state the key does not carry, so the memo answers for a request it was not built from. A path that resolves to no action is memoised as well, and replaying that entry returns without consulting any dispatch type, so no action is set and the request fails. A GET of a path whose action is declared POST-only therefore disables that path for every later request, the correct POST included. An entry that did resolve replays the level the earlier descent reached. Where a POST-only action sits below a shallower action on the same path, a GET memoises the shallow route, and a later POST is dispatched there with an auto() guarding the deeper controller never running. The memo is cleared only when an action is registered, which happens at setup, so an entry lasts for the life of the process, and its cap of 2048 entries bounds how many paths one caller can disable. In the configuration measured, the misroute lands on the less privileged action, so it is an authorization check not running rather than a privilege gain. | |||||
| CVE-2026-85082 | 2026-09-25 | N/A | N/A | ||
| Root Browser Classic 3.3.0 passes the path of a selected SQLite database to an operating-system shell without safely separating the filename from the command. | |||||
| CVE-2026-84403 | 2026-09-25 | N/A | 6.2 MEDIUM | ||
| The Botslab G980H dash camera firmware does not require authenticated pairing or client binding before permitting access to Bluetooth Low Energy communications and GATT characteristics. An unauthenticated attacker within Bluetooth range could intercept or directly retrieve sensitive device information, including device identifiers, firmware information, and protected WiFi credentials. | |||||
| CVE-2026-84283 | 2026-09-25 | N/A | N/A | ||
| Secure Folder 1.2 stores files selected for its password-protected vault as unencrypted files in the Android shared-storage tree. A local application or file manager that has access to the relevant shared-storage path can enumerate, copy, and open those files without authenticating to Secure Folder. | |||||
| CVE-2026-82716 | 2026-09-25 | N/A | 4.6 MEDIUM | ||
| The Botslab G980H dash camera firmware includes sensitive configuration information, including WiFi credentials, in diagnostic logs generated during the support process. These logs remain accessible on removable storage after the support operation has completed. An unauthenticated attacker with physical access to the storage media could retrieve the logs and obtain sensitive device information. | |||||
| CVE-2026-82708 | 2026-09-25 | N/A | 6.5 MEDIUM | ||
| The Botslab G980H dash camera firmware contains a path traversal vulnerability in its HTTP server. An attacker with access to the device's WiFi network could submit a crafted request to access files within the device's removable storage that were not intended to be directly accessible through the web server. Exposed files could include recordings, images, diagnostic logs, or firmware files. | |||||
| CVE-2026-82585 | 2026-09-25 | N/A | 6.5 MEDIUM | ||
| The Botslab G980H dash camera firmware transmits sensitive information over unencrypted HTTP and RTSP connections. An attacker capable of intercepting communications on the device's WiFi network could obtain stored recordings, live video, location information, images, diagnostic logs, or other sensitive information exchanged between the device and its mobile application. | |||||
| CVE-2026-81630 | 2026-09-25 | N/A | 8.1 HIGH | ||
| The Botslab G980H dash camera firmware does not adequately verify the authenticity of firmware updates. The update process retrieves firmware through an unprotected connection and relies on an integrity value supplied with the firmware instead of a trusted cryptographic signature. A suitably positioned attacker who intercepts a firmware download, or an authenticated attacker who submits a crafted update, could install modified firmware and execute unauthorized code on the device. | |||||
| CVE-2026-79959 | 2026-09-25 | N/A | 6.8 MEDIUM | ||
| The Botslab G980H dash camera firmware contains a hard-coded root account password that cannot be changed by the user. An attacker who obtains the firmware or has physical access to the device could recover the credential and use it to obtain root access through the UART interface. | |||||
| CVE-2026-77967 | 2026-09-25 | N/A | 8.1 HIGH | ||
| The Botslab G980H dash camera firmware accepts a reusable authentication value without adequately verifying its freshness or association with the requesting client. An unauthenticated attacker with adjacent network access who captures a valid authentication value could replay it from another client to establish an authenticated session and access privileged device functionality. | |||||
| CVE-2026-75558 | 2026-09-25 | N/A | 5.3 MEDIUM | ||
| The Botslab G980H dash camera firmware uses a hard-coded cryptographic key and initialization vector to protect WiFi credentials communicated by the device. An attacker who obtains the protected credential and extracts the cryptographic material from the firmware could recover the WiFi password and gain unauthorized access to the device network. | |||||
| CVE-2026-61714 | 2026-09-25 | N/A | 7.8 HIGH | ||
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.2.4 until 2.5.6, configuring synth.midi-channels above 16 allows the MIDI player to index _fluid_player_t::channel_isplaying outside its fixed-size heap allocation while tracking active channels. The resulting out-of-bounds reads and writes invoke undefined behavior and may compromise confidentiality, integrity, or availability. No crafted MIDI file is required because the unsafe condition is created by the channel-count configuration itself. Keeping synth.midi-channels at its default value of 16 avoids the vulnerable path. This issue is fixed in version 2.5.6. | |||||
| CVE-2026-51997 | 2026-09-25 | N/A | 8.8 HIGH | ||
| An issue in geelen mcp-remote 0.1.16 through 0.1.38 allows a remote attacker to execute arbitrary code via the open() functions | |||||
| CVE-2026-44642 | 2026-09-25 | N/A | 8.1 HIGH | ||
| Piwigo is a full featured open source photo gallery application for the web. Prior to 16.4.0, check_upgrade_access_rights() in admin/include/functions_upgrade.php conditionally escapes the submitted username only when the removed get_magic_quotes_gpc function exists, so PHP 8 and later concatenate an unauthenticated username directly into the upgrade authentication SQL query. When database upgrades are pending, a crafted query result can satisfy the status and password checks, set PHPWG_IN_UPGRADE, and authorize upgrade execution without valid administrator credentials. This can cause unauthorized database integrity changes and service disruption. This vulnerability is fixed in 16.4.0. | |||||
| CVE-2026-42324 | 2026-09-25 | N/A | 7.2 HIGH | ||
| Piwigo is a full featured open source photo gallery application for the web. Prior to 16.4.0, admin/element_set_ranks.php stores administrator-controlled image_order[] values without enforcing the existing sort-field whitelist. The stored album image_order expression is later concatenated into ORDER BY clauses by admin/batch_manager_global.php, admin/batch_manager_unit.php, include/section_init.inc.php, and include/ws_functions/pwg.categories.php. When at least one album contains at least one photo, an authenticated administrator can store a crafted expression and trigger it in a later album or Batch Manager query to disclose, modify, or disrupt database data. This issue is fixed in version 16.4.0. | |||||
| CVE-2026-36471 | 2026-09-25 | N/A | 5.8 MEDIUM | ||
| Deserialization of Untrusted Data of the __post_data parameter in cn_parse_url() in CuteNews v.2.1.2 allows a remote attacker to inject arbitrary values into internal request variables (including __referer) via a crafted base64-encoded serialized PHP payload submitted as a POST parameter. | |||||
| CVE-2026-100190 | 2026-09-25 | N/A | N/A | ||
| The AIL Framework crawler splash domain page (showDomain.html) is vulnerable to stored cross-site script injection (XSS). User-supplied data originating from imported crawler captures—specifically item IDs, URLs, and screenshot file paths—was interpolated directly into inline JavaScript contexts within the HTML template. This included an onclick attribute that embedded raw screenshot and URL values into a JavaScript function call, and an inline script block that assigned a screenshot value to a JavaScript variable without escaping. An attacker with a user-role API client could craft a malicious crawler capture import containing JavaScript payloads in these fields. When any user (including privileged users) subsequently viewed the affected domain page, the injected script would execute in the victim's browser context, potentially allowing session hijacking, data exfiltration, or unauthorized actions on behalf of the victim. The vulnerability is stored in the application's data layer and triggered upon page rendering, requiring no further interaction beyond loading the domain view. | |||||
| CVE-2000-0926 | 1 Smartwin Technology | 1 Cyberoffice Shopping Cart | 2026-09-25 | 7.5 HIGH | N/A |
| SmartWin CyberOffice Shopping Cart 2 (aka CyberShop) allows remote attackers to modify price information by changing the "Price" hidden form variable. | |||||
| CVE-2000-0931 | 1 David Harris | 1 Pegasus Mail | 2026-09-25 | 7.5 HIGH | N/A |
| Buffer overflow in Pegasus Mail 3.11 allows remote attackers to cause a denial of service and possibly execute arbitrary commands via a long email message containing binary data. | |||||