Total
417813 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-95699 | 2026-09-25 | N/A | 9.6 CRITICAL | ||
| Prior to 9/18/2026, the iSteamX mobile application's AWS policy could grant authenticated users access to wildcard MQTT topics, which can expose other users' device data and allow the attacker to start and stop other connected users' devices. This risked exposing user profile information and potential scalding due to unintended device activation. | |||||
| CVE-2026-88956 | 2026-09-25 | N/A | 6.8 MEDIUM | ||
| The Botslab G980H dash camera firmware contains an authentication vulnerability in the root account exposed through the device's UART interface. The affected account does not require a password before granting access to a privileged system interface, and the interface also displays the device's WiFi password during startup. An unauthenticated attacker with physical access to the device could connect to the UART interface, obtain root privileges, and recover the WiFi password. | |||||
| CVE-2026-88761 | 2026-09-25 | N/A | 5.3 MEDIUM | ||
| The Botslab G980H dash camera firmware generates the default WiFi password using predictable device information, portions of which are advertised by the product. An unauthenticated attacker within WiFi range could potentially determine the remaining password characters through limited guessing and gain unauthorized access to the device network. | |||||
| CVE-2026-88386 | 2026-09-25 | N/A | 5.5 MEDIUM | ||
| libsndfile 1.2.2 contains a misaligned memory access issue in psf_binheader_readf() while parsing WAV fmt chunks. A specially crafted WAV file can cause the function to cast an unaligned destination address to unsigned int * and perform a 4-byte store. This results in undefined behavior leading to denial of service. | |||||
| CVE-2026-88362 | 2026-09-25 | N/A | 7.5 HIGH | ||
| MuJS e892c9fdb contains an incorrect numeric conversion vulnerability in jsR_isindex() in jsrun.c. A specially crafted JavaScript input containing an excessively large numeric array index can cause an out-of-range floating-point value to be converted to an integer without proper range validation. This results in undefined behavior and can cause process termination, leading to denial of service. | |||||
| CVE-2026-88359 | 2026-09-25 | N/A | 6.5 MEDIUM | ||
| libfyaml 0.9.6 contains a stack exhaustion vulnerability in fy_atom_iter_format(). When processing a specially crafted YAML document containing a very large literal or folded block scalar, the function repeatedly grows an internal buffer using alloca() inside a loop. The allocated stack memory is not released until the function returns, causing cumulative stack growth that can exceed the process stack limit and result in SIGSEGV and denial of service. | |||||
| CVE-2026-87722 | 2026-09-25 | N/A | N/A | ||
| Uncontrolled Resource Consumption (CWE-400 / CWE-1333) in regex search query predicates (such as RegexProjectPredicate, RegexRefPredicate, RegexPathPredicate, and sibling predicates) and REST regex filter endpoints (RegexListSearcher /projects/?r= and RefFilter /projects/{project}/branches/?r=) in Gerrit Code Review versions 2.1.6 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a denial of service (CPU starvation and JVM heap exhaustion / OutOfMemoryError) via crafted search queries or REST API requests containing regular expressions with large counted repetitions or exponential DFA determinization patterns. Because the user-supplied regular expression is compiled into an unbounded dk.brics.automaton instance (new RegExp(re).toAutomaton()) on the request thread prior to index evaluation or access control visibility filtering, trivial queries can exhaust JVM heap or pin request threads regardless of heap size. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. | |||||
| CVE-2026-87721 | 2026-09-25 | N/A | N/A | ||
| Uncontrolled Resource Consumption (CWE-400 / CWE-407) in the ANTLR 3 search query parser (QueryParser / Query.g) in Gerrit Code Review versions 2.0.19 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an unauthenticated remote attacker (or an authenticated user if anonymous read access is disabled) to cause a persistent denial of service (CPU exhaustion and HTTP worker thread pool starvation requiring a server restart) via crafted search queries containing deeply nested parentheses sent to query evaluation endpoints (/changes/?q=, /accounts/?q=, /groups/?query=, /projects/?query=, /Documentation/?q=, /changes/{id}/query?expression=, or SSH gerrit query). Because syntactic predicates in conditionOr and conditionAnd recurse via conditionBase without memoization prior to capability or visibility checks and worker threads do not abort when the client disconnects, a small number of requests (such as 25 requests matching default httpd.maxThreads) can permanently pin all HTTP worker threads. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. | |||||
| CVE-2026-87720 | 2026-09-25 | N/A | N/A | ||
| Incorrect Authorization (CWE-863) in project name normalization (ProjectUtil.stripGitSuffix) and ProjectCache eviction logic (ProjectCacheImpl) in Gerrit Code Review versions 2.16.0 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an authenticated user (or an unauthenticated user if the repository was previously public) to cause unauthorized disclosure of private repository content and durable restoration of revoked project-owner administrative privileges via crafted requests using repeated .git suffixes (such as project.git.git) across REST APIs, Gitiles, or SSH Git commands. Because Gerrit strips only a single terminal .git suffix when constructing the logical ProjectCache key while JGit (FileKey.lenient) resolves the suffixed alias to the same canonical bare repository on disk, revoking read access or removing owner rules on the canonical project name fails to evict the cached alias ProjectState during the cache validity window, enabling reads of newly created private commits or writes to refs/meta/config. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. | |||||
| CVE-2026-87118 | 2026-09-25 | N/A | 5.7 MEDIUM | ||
| The Botslab G980H dash camera firmware contains an out of bounds write vulnerability in its command processing functionality. An authenticated attacker with adjacent network access could submit crafted command data that corrupts memory, potentially disrupting authentication state or causing the affected process to terminate and the device to restart, resulting in a temporary denial of service. | |||||
| CVE-2026-85496 | 2026-09-25 | N/A | 8.8 HIGH | ||
| The Botslab G980H dash camera firmware generates session identifiers using a small sequential value space rather than a suitably unpredictable source. An unauthenticated attacker with adjacent network access and knowledge that an active session exists could potentially determine a valid session identifier and use it to bypass intended authorization controls. | |||||
| CVE-2026-85491 | 2026-09-25 | N/A | 8.8 HIGH | ||
| Catalyst::Seal versions before 0.03 for Perl allow one request to disable a path or route a later one past an authorization check via a dispatch memo keyed on the request path alone. Catalyst::Seal replaces the dispatcher's prepare_action with a version that memoises how a path resolved: which dispatch type matched, at which level, and what was left over as arguments. The key is the request path and nothing else. Action roles that match on the method, content type, scheme or query make that resolution depend on state the key does not carry, so the memo answers for a request it was not built from. A path that resolves to no action is memoised as well, and replaying that entry returns without consulting any dispatch type, so no action is set and the request fails. A GET of a path whose action is declared POST-only therefore disables that path for every later request, the correct POST included. An entry that did resolve replays the level the earlier descent reached. Where a POST-only action sits below a shallower action on the same path, a GET memoises the shallow route, and a later POST is dispatched there with an auto() guarding the deeper controller never running. The memo is cleared only when an action is registered, which happens at setup, so an entry lasts for the life of the process, and its cap of 2048 entries bounds how many paths one caller can disable. In the configuration measured, the misroute lands on the less privileged action, so it is an authorization check not running rather than a privilege gain. | |||||
| CVE-2026-85082 | 2026-09-25 | N/A | N/A | ||
| Root Browser Classic 3.3.0 passes the path of a selected SQLite database to an operating-system shell without safely separating the filename from the command. | |||||
| CVE-2026-84403 | 2026-09-25 | N/A | 6.2 MEDIUM | ||
| The Botslab G980H dash camera firmware does not require authenticated pairing or client binding before permitting access to Bluetooth Low Energy communications and GATT characteristics. An unauthenticated attacker within Bluetooth range could intercept or directly retrieve sensitive device information, including device identifiers, firmware information, and protected WiFi credentials. | |||||
| CVE-2026-84283 | 2026-09-25 | N/A | N/A | ||
| Secure Folder 1.2 stores files selected for its password-protected vault as unencrypted files in the Android shared-storage tree. A local application or file manager that has access to the relevant shared-storage path can enumerate, copy, and open those files without authenticating to Secure Folder. | |||||
| CVE-2026-82716 | 2026-09-25 | N/A | 4.6 MEDIUM | ||
| The Botslab G980H dash camera firmware includes sensitive configuration information, including WiFi credentials, in diagnostic logs generated during the support process. These logs remain accessible on removable storage after the support operation has completed. An unauthenticated attacker with physical access to the storage media could retrieve the logs and obtain sensitive device information. | |||||
| CVE-2026-82708 | 2026-09-25 | N/A | 6.5 MEDIUM | ||
| The Botslab G980H dash camera firmware contains a path traversal vulnerability in its HTTP server. An attacker with access to the device's WiFi network could submit a crafted request to access files within the device's removable storage that were not intended to be directly accessible through the web server. Exposed files could include recordings, images, diagnostic logs, or firmware files. | |||||
| CVE-2026-82585 | 2026-09-25 | N/A | 6.5 MEDIUM | ||
| The Botslab G980H dash camera firmware transmits sensitive information over unencrypted HTTP and RTSP connections. An attacker capable of intercepting communications on the device's WiFi network could obtain stored recordings, live video, location information, images, diagnostic logs, or other sensitive information exchanged between the device and its mobile application. | |||||
| CVE-2026-81630 | 2026-09-25 | N/A | 8.1 HIGH | ||
| The Botslab G980H dash camera firmware does not adequately verify the authenticity of firmware updates. The update process retrieves firmware through an unprotected connection and relies on an integrity value supplied with the firmware instead of a trusted cryptographic signature. A suitably positioned attacker who intercepts a firmware download, or an authenticated attacker who submits a crafted update, could install modified firmware and execute unauthorized code on the device. | |||||
| CVE-2026-79959 | 2026-09-25 | N/A | 6.8 MEDIUM | ||
| The Botslab G980H dash camera firmware contains a hard-coded root account password that cannot be changed by the user. An attacker who obtains the firmware or has physical access to the device could recover the credential and use it to obtain root access through the UART interface. | |||||