Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-43142 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: gen1: Destroy internal buffers after FW releases After the firmware releases internal buffers, the driver was not destroying them. This left stale allocations that were no longer used, especially across resolution changes where new buffers are allocated per the updated requirements. As a result, memory was wasted until session close. Destroy internal buffers once the release response is received from the firmware. | |||||
| CVE-2026-43084 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: make hash table per queue Sharing a global hash table among all queues is tempting, but it can cause crash: BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue] [..] nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue] nfnetlink_rcv_msg+0x46a/0x930 kmem_cache_alloc_node_noprof+0x11e/0x450 struct nf_queue_entry is freed via kfree, but parallel cpu can still encounter such an nf_queue_entry when walking the list. Alternative fix is to free the nf_queue_entry via kfree_rcu() instead, but as we have to alloc/free for each skb this will cause more mem pressure. | |||||
| CVE-2026-43059 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced mgmt_pending_valid(), which not only validates the pending command but also unlinks it from the pending list if it is valid. This change in semantics requires updates to several completion handlers to avoid list corruption and memory safety issues. This patch addresses two left-over issues from the aforementioned rework: 1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove() is replaced with mgmt_pending_free() in the success path. Since mgmt_pending_valid() already unlinks the command at the beginning of the function, calling mgmt_pending_remove() leads to a double list_del() and subsequent list corruption/kernel panic. 2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error path is removed. Since the current command is already unlinked by mgmt_pending_valid(), this foreach loop would incorrectly target other pending mesh commands, potentially freeing them while they are still being processed concurrently (leading to UAFs). The redundant mgmt_cmd_status() is also simplified to use cmd->opcode directly. | |||||
| CVE-2026-31711 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: server: fix active_num_conn leak on transport allocation failure Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept. | |||||
| CVE-2026-31697 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed When retrieving the ID for the CPU, don't attempt to copy the ID blob to userspace if the firmware command failed. If the failure was due to an invalid length, i.e. the userspace buffer+length was too small, copying the number of bytes _firmware_ requires will overflow the kernel-allocated buffer and leak data to userspace. BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388 CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 Call Trace: <TASK> dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120 print_address_description ../mm/kasan/report.c:378 [inline] print_report+0xbc/0x260 ../mm/kasan/report.c:482 kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595 check_region_inline ../mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200 instrument_copy_to_user ../include/linux/instrumented.h:129 [inline] _inline_copy_to_user ../include/linux/uaccess.h:205 [inline] _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26 copy_to_user ../include/linux/uaccess.h:236 [inline] sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222 sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575 vfs_ioctl ../fs/ioctl.c:51 [inline] __do_sys_ioctl ../fs/ioctl.c:597 [inline] __se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> WARN if the driver says the command succeeded, but the firmware error code says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any firwmware error. | |||||
| CVE-2026-43129 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ima: verify the previous kernel's IMA buffer lies in addressable RAM Patch series "Address page fault in ima_restore_measurement_list()", v3. When the second-stage kernel is booted via kexec with a limiting command line such as "mem=<size>" we observe a pafe fault that happens. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) not-present page This happens on x86_64 only, as this is already fixed in aarch64 in commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") This patch (of 3): When the second-stage kernel is booted with a limiting command line (e.g. "mem=<size>"), the IMA measurement buffer handed over from the previous kernel may fall outside the addressable RAM of the new kernel. Accessing such a buffer can fault during early restore. Introduce a small generic helper, ima_validate_range(), which verifies that a physical [start, end] range for the previous-kernel IMA buffer lies within addressable memory: - On x86, use pfn_range_is_mapped(). - On OF based architectures, use page_is_ram(). | |||||
| CVE-2026-31750 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi: Add reference counting for Comedi command handling") did not consider the exceptional exit case in do_cmd_ioctl() where runflags is not set. This caused chanlist not to be properly freed by do_become_nonbusy(), as it only frees chanlist when runflags is correctly set. Added a check in do_become_nonbusy() for the case where runflags is not set, to properly free the chanlist memory. [1] BUG: memory leak backtrace (crc 844a0efa): __comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline] do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890 do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline] | |||||
| CVE-2026-31767 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsi: Don't do DSC horizontal timing adjustments in command mode Stop adjusting the horizontal timing values based on the compression ratio in command mode. Bspec seems to be telling us to do this only in video mode, and this is also how the Windows driver does things. This should also fix a div-by-zero on some machines because the adjusted htotal ends up being so small that we end up with line_time_us==0 when trying to determine the vtotal value in command mode. Note that this doesn't actually make the display on the Huawei Matebook E work, but at least the kernel no longer explodes when the driver loads. (cherry picked from commit 0b475e91ecc2313207196c6d7fd5c53e1a878525) | |||||
| CVE-2026-43151 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Revert "media: iris: Add sanity check for stop streaming" This reverts commit ad699fa78b59241c9d71a8cafb51525f3dab04d4. Revert the check that skipped stop_streaming when the instance was in IRIS_INST_ERROR, as it caused multiple regressions: 1. Buffers were not returned to vb2 when the instance was already in error state, triggering warnings in the vb2 core because buffer completion was skipped. 2. If a session failed early (e.g. unsupported configuration), the instance transitioned to IRIS_INST_ERROR. When userspace attempted to stop streaming for cleanup, stop_streaming was skipped due to the added check, preventing proper teardown and leaving the firmware in an inconsistent state. | |||||
| CVE-2026-43076 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline data i_size during inode read When reading an inode from disk, ocfs2_validate_inode_block() performs various sanity checks but does not validate the size of inline data. If the filesystem is corrupted, an inode's i_size can exceed the actual inline data capacity (id_count). This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data buffer, triggering a use-after-free when accessing directory entries from freed memory. In the syzbot report: - i_size was 1099511627576 bytes (~1TB) - Actual inline data capacity (id_count) is typically <256 bytes - A garbage rec_len (54648) caused ctx->pos to jump out of bounds - This triggered a UAF in ocfs2_check_dir_entry() Fix by adding a validation check in ocfs2_validate_inode_block() to ensure inodes with inline data have i_size <= id_count. This catches the corruption early during inode read and prevents all downstream code from operating on invalid data. | |||||
| CVE-2026-31758 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Flush anchored URBs in usbtmc_release When calling usbtmc_release, pending anchored URBs must be flushed or killed to prevent use-after-free errors (e.g. in the HCD giveback path). Call usbtmc_draw_down() to allow anchored URBs to be completed. | |||||
| CVE-2026-43079 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Skip discovery table for offline dies This warning can be triggered if NUMA is disabled and the system boots with fewer CPUs than the number of CPUs in die 0. WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore] Currently, the discovery table continues to be parsed even if all CPUs in the associated die are offline. This can lead to an array overflow at "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which may trigger the warning above or cause other issues. | |||||
| CVE-2026-43066 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0. | |||||
| CVE-2026-31723 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | |||||
| CVE-2026-43075 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_write_end_inline KASAN reports a use-after-free write of 4086 bytes in ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on a loop device. The actual bug is an out-of-bounds write past the inode block buffer, not a true use-after-free. The write overflows into an adjacent freed page, which KASAN reports as UAF. The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk id_count field to determine whether a write fits in inline data. On a corrupted filesystem, id_count can exceed the physical maximum inline data capacity, causing writes to overflow the inode block buffer. Call trace (crash path): vfs_copy_file_range (fs/read_write.c:1634) do_splice_direct splice_direct_to_actor iter_file_splice_write ocfs2_file_write_iter generic_perform_write ocfs2_write_end ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949) ocfs2_write_end_inline (fs/ocfs2/aops.c:1915) memcpy_from_folio <-- KASAN: write OOB So add id_count upper bound check in ocfs2_validate_inode_block() to alongside the existing i_size check to fix it. | |||||
| CVE-2026-43152 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-pl: handle probe errors Errors in init must be reported back or we'll follow a NULL pointer the first time FF is used. | |||||
| CVE-2026-43130 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") relies on pci_dev_is_disconnected() to skip ATS invalidation for safely-removed devices, but it does not cover link-down caused by faults, which can still hard-lock the system. For example, if a VM fails to connect to the PCIe device, "virsh destroy" is executed to release resources and isolate the fault, but a hard-lockup occurs while releasing the group fd. Call Trace: qi_submit_sync qi_flush_dev_iotlb intel_pasid_tear_down_entry device_block_translation blocking_domain_attach_dev __iommu_attach_device __iommu_device_set_domain __iommu_group_set_domain_internal iommu_detach_group vfio_iommu_type1_detach_group vfio_group_detach_container vfio_group_fops_release __fput Although pci_device_is_present() is slower than pci_dev_is_disconnected(), it still takes only ~70 µs on a ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed and width increase. Besides, devtlb_invalidation_with_pasid() is called only in the paths below, which are far less frequent than memory map/unmap. 1. mm-struct release 2. {attach,release}_dev 3. set/remove PASID 4. dirty-tracking setup The gain in system stability far outweighs the negligible cost of using pci_device_is_present() instead of pci_dev_is_disconnected() to decide when to skip ATS invalidation, especially under GDR high-load conditions. | |||||
| CVE-2026-43149 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean() The priv->rx_buffer and priv->tx_buffer are alloc'd together as contiguous buffers in uhdlc_init() but freed as two buffers in uhdlc_memclean(). Change the cleanup to only call dma_free_coherent() once on the whole buffer. | |||||
| CVE-2026-43102 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix memory leak in airoha_qdma_rx_process() If an error occurs on the subsequents buffers belonging to the non-linear part of the skb (e.g. due to an error in the payload length reported by the NIC or if we consumed all the available fragments for the skb), the page_pool fragment will not be linked to the skb so it will not return to the pool in the airoha_qdma_rx_process() error path. Fix the memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix page recycling in airoha_qdma_rx_process()")' and always running page_pool_put_full_page routine in the airoha_qdma_rx_process() error path. | |||||
| CVE-2026-31721 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: move list and spinlock inits from bind to alloc There was an issue when you did the following: - setup and bind an hid gadget - open /dev/hidg0 - use the resulting fd in EPOLL_CTL_ADD - unbind the UDC - bind the UDC - use the fd in EPOLL_CTL_DEL When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported within remove_wait_queue (via ep_remove_wait_queue). After some debugging I found out that the queues, which f_hid registers via poll_wait were the problem. These were initialized using init_waitqueue_head inside hidg_bind. So effectively, the bind function re-initialized the queues while there were still items in them. The solution is to move the initialization from hidg_bind to hidg_alloc to extend their lifetimes to the lifetime of the function instance. Additionally, I found many other possibly problematic init calls in the bind function, which I moved as well. | |||||