Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-64165 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ARM: integrator: Fix early initialization Starting with commit bdb249fce9ad4 ("ARM: integrator: read counter using syscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatible which in turn calls of_syscon_register. This function allocates memory. Since the memory management code has not been initialized at that time, the call always fails. It either returns -ENOMEM or crashes as follows. Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc5-00026-g5fcc9bf84ee5 #1 PREEMPT Hardware name: ARM Integrator/CP (Device Tree) PC is at __kmalloc_cache_noprof+0xec/0x39c LR is at __kmalloc_cache_noprof+0x34/0x39c ... Call trace: __kmalloc_cache_noprof from of_syscon_register+0x7c/0x310 of_syscon_register from device_node_get_regmap+0xa4/0xb0 device_node_get_regmap from intcp_init_early+0xc/0x40 intcp_init_early from start_kernel+0x60/0x688 start_kernel from 0x0 The crash is seen due to a dereferenced pointer which is not supposed to be NULL but is NULL if the memory management subsystem has not been initialized. The crash is not seen with all versions of gcc. Some versions such as gcc 9.x apparently do not dereference the pointer, presumably if tracing is disabled. The problem has been reproduced with gcc 10.x, 11.x, and 13.x. Either case, if the crash is not seen, the call to syscon_regmap_lookup_by_compatible returns -ENOMEM, and sched_clock_register is never called. Fix the problem by moving the early initialization code into the standard machine initialization code. | |||||
| CVE-2026-64156 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfs, afs: Fix write skipping in dir/link writepages Fix netfs_write_single() and afs_single_writepages() to better handle a write that would be skipped due to lock contention and WB_SYNC_NONE by returning 1 from netfs_write_single() if it skipped and making afs_single_writepages() skip also. If a skip occurs, the inode must be re-marked as the VFS may have cleared the mark. This is really only theoretical for directories in netfs_write_single() as the only path to that is through afs_single_writepages() that takes the ->validate_lock around it, thereby serialising it. | |||||
| CVE-2026-64119 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: use list_del_rcu in l2tp_session_unhash An unprivileged local user can pin a host CPU indefinitely in l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace suffices; on any host that has l2tp_core loaded the trigger is reachable from a standard `unshare -Urn` sandbox. l2tp_session_unhash() removes a session from tunnel->session_list with list_del_init(), but that list is walked by l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under rcu_read_lock_bh(). list_del_init() leaves the deleted entry's next/prev self-pointing; a reader that has loaded the entry and then advances pos->list.next reads &session->list, container_of()s back to the same session, and list_for_each_entry_rcu() never reaches the list head. The CPU stays in strcmp() inside the walker, with BH and preemption disabled, so RCU grace periods on the host stall behind it and the wedged thread cannot be killed (SIGKILL is delivered on syscall return). Use list_del_rcu() to match the existing list_add_rcu() in l2tp_session_register(); the deleted session remains visible to in-flight walkers with consistent next/prev pointers until kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list has exactly one list_del_init() call site; the list_del_init (&session->clist) at l2tp_core.c:533 operates on the per-collision list, which is not walked under RCU. list_empty(&session->list) is not used anywhere in net/l2tp/ after the unhash point, so dropping the post-delete self-init is safe; the fix has no userspace-visible behavior change. | |||||
| CVE-2026-64120 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ethtool: fix NULL pointer dereference in phy_reply_size In phy_prepare_data(), several strings such as 'name', 'drvname', 'upstream_sfp_name', and 'downstream_sfp_name' are allocated using kstrdup(). However, these allocations were not checked for failure. If kstrdup() fails for 'name', it returns NULL while the function continues. This leads to a kernel NULL pointer dereference and panic later in phy_reply_size() when it unconditionally calls strlen() on the NULL pointer. While other strings like 'upstream_sfp_name' might be checked before access in certain code paths, failing to handle these allocations consistently can lead to incomplete data reporting or hidden bugs. Fix this by adding proper NULL checks for all kstrdup() calls in phy_prepare_data() and implement a centralized error handling path using goto labels to ensure all previously allocated resources are freed on failure. | |||||
| CVE-2026-64122 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after mlx5e_safe_reopen_channels() has torn down and freed the channel (and its embedded SQs). Replace the three sq->netdev references with priv->netdev which is safe because priv outlives channel teardown. The netdev_err() call already used priv->netdev for this reason; make the trylock/unlock and health_channel_eq_recover calls consistent. This fixes the following KASAN splat: BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277 Call Trace: mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] devlink_health_reporter_recover+0xa2/0x150 devlink_health_report+0x254/0x7c0 mlx5e_reporter_tx_timeout+0x297/0x380 [mlx5_core] mlx5e_tx_timeout_work+0x109/0x170 [mlx5_core] process_one_work+0x677/0xf20 worker_thread+0x51f/0xd90 kthread+0x3a5/0x810 ret_from_fork+0x208/0x400 ret_from_fork_asm+0x1a/0x30 | |||||
| CVE-2026-64124 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: devmem: reject dma-buf bind with non-page-aligned size or SG length net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be PAGE_SIZE multiples without checking: - tx_vec is sized dmabuf->size / PAGE_SIZE, and net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size before indexing tx_vec[virt_addr / PAGE_SIZE]. With size = N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base = N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past. - owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner() covers the full byte len, so a non-page-multiple non-final sg desyncs num_niovs from the gen_pool region for every later sg, on both RX and TX. dma-buf does not require page-aligned sizes, so the bind path has to enforce what its own indexing assumes. Reject both with -EINVAL. The size check is TX-only (only tx_vec is sized off dmabuf->size); the SG-length check covers both directions. | |||||
| CVE-2026-64129 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page When check_stable_address_space() fails after the PMD spinlock has been acquired via pmd_lock(), the code jumps directly to the abort label, bypassing the spin_unlock() call in unlock_abort. This causes the PMD spinlock to be permanently held, leading to a deadlock. Change the goto target from abort to unlock_abort to ensure the spinlock is always released on this error path. | |||||
| CVE-2026-64130 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free __GFP_ZEROTAGS semantics are currently a bit weird, but effectively this flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN. If we run with init_on_free, we will zero out pages during __free_pages_prepare(), to skip zeroing on the allocation path. However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will consequently not only skip clearing page content, but also skip clearing tag memory. Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that will get mapped to user space through set_pte_at() later: set_pte_at() and friends will detect that the tags have not been initialized yet (PG_mte_tagged not set), and initialize them. However, for the huge zero folio, which will be mapped through a PMD marked as special, this initialization will not be performed, ending up exposing whatever tags were still set for the pages. The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state that allocation tags are set to 0 when a page is first mapped to user space. That no longer holds with the huge zero folio when init_on_free is enabled. Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to tag_clear_highpages() whether we want to also clear page content. Invert the meaning of the tag_clear_highpages() return value to have clearer semantics. Reproduced with the huge zero folio by modifying the check_buffer_fill arm64/mte selftest to use a 2 MiB area, after making sure that pages have a non-0 tag set when freeing (note that, during boot, we will not actually initialize tags, but only set KASAN_TAG_KERNEL in the page flags). $ ./check_buffer_fill 1..20 ... not ok 17 Check initial tags with private mapping, sync error mode and mmap memory not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory ... This code needs more cleanups; we'll tackle that next, like decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN. [akpm@linux-foundation.org: s/__GPF_ZERO/__GFP_ZERO/, per David] | |||||
| CVE-2026-64132 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: refresh hdr pointer before ioam6_event() Reported by Sashiko: In ipv6_hop_ioam(), the hdr pointer is initialized to point into the skb's linear data buffer. Later, the code calls skb_ensure_writable(), which might reallocate the buffer: if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) goto drop; /* Trace pointer may have changed */ trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) + optoff + sizeof(*hdr)); ioam6_fill_trace_data(skb, ns, trace, true); ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev), GFP_ATOMIC, (void *)trace, hdr->opt_len - 2); If the skb is cloned or lacks sufficient linear headroom, skb_ensure_writable() will invoke pskb_expand_head(), which reallocates the skb's data buffer and frees the old one, invalidating pointers to it. While the code recalculates the trace pointer immediately after the call to skb_ensure_writable(), it fails to recalculate the hdr pointer. This patch fixes the above by recalculating the hdr pointer before passing hdr->opt_len to ioam6_event(), so that we avoid any UaF. | |||||
| CVE-2026-64135 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and passes it to i2c_smbus_read_block_data() to retrieve the 4-byte BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour caller buffer sizes -- it memcpy()s data.block[0] bytes from the SMBus transaction (where data.block[0] is the length byte returned by the slave device, up to I2C_SMBUS_BLOCK_MAX = 32): memcpy(values, &data.block[1], data.block[0]); If the device returns any block length above 5, the call overflows the caller's 5-byte stack buffer before the post-call if (ret != 4) return -EIO; check has a chance to reject the response. Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room for any well-formed SMBus block response, matching the convention used by the other i2c_smbus_read_block_data() callers in this driver. | |||||
| CVE-2026-64137 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: require net admin for CIFS SWN netlink CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The intended sender is the cifs.witness helper, but the generic-netlink operation currently has no capability flag, so any local process can send RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness handler. The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group capability flags. Register messages sent to that group include the witness registration id and, for NTLM-authenticated mounts, the username, domain, and password attributes copied from the CIFS session. An unprivileged local process should not be able to join that group and receive those messages. Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The cifs.witness service runs with the privileges needed for both operations. | |||||
| CVE-2026-64226 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path In scx_root_enable_workfn(), put_task_struct(p) is called before scx_error() dereferences p->comm and p->pid. If the iterator's reference is the last drop, the task is freed synchronously and the deref becomes a UAF. Move put_task_struct() past scx_error(). | |||||
| CVE-2026-64228 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ethtool: phy: avoid NULL deref when PHY driver is unbound phydev->drv can become NULL while the phy_device is still attached to its net_device, namely after the PHY driver is unbound via sysfs: echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind phy_remove() clears phydev->drv but doesn't call phy_detach(), so the phy_device stays in the link topology xarray and ethnl_req_get_phydev() still hands it back. ETHTOOL_MSG_PHY_GET then oopses on: rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL); drvname is already treated as optional by phy_reply_size(), phy_fill_reply() and phy_cleanup_data(), so just skip the allocation when there is no driver bound. | |||||
| CVE-2026-64229 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Disable broadcast TLB flush when PCID is disabled Booting with "nopcid" clears X86_FEATURE_PCID and keeps CR4.PCIDE from being set to one. On AMD CPUs that support INVLPGB, broadcast TLB flushing remains enabled. There are two checks that decide whether the global ASID code runs, mm_global_asid() and consider_global_asid(), that key off of the X86_FEATURE_INVLPGB feature. Once an mm becomes active on more than three CPUs, consider_global_asid() assigns it a global ASID, after which flush_tlb_mm_range() takes the broadcast_tlb_flush() path using a non-zero PCID. Issuing an INVLPGB with a non-zero PCID while CR4.PCIDE is not set results in a #GP: Oops: general protection fault, kernel NULL pointer dereference 0x1: 0000 [#1] SMP NOPTI CPU: 158 UID: 0 PID: 3119 Comm: snap Not tainted 7.1.0-rc3 #1 PREEMPT(full) Hardware name: ... RIP: 0010:broadcast_tlb_flush Code: ... 89 da 48 83 c8 07 <0f> 01 fe eb 08 cc cc cc ... Call Trace: <TASK> flush_tlb_mm_range ptep_clear_flush wp_page_copy ? _raw_spin_unlock __handle_mm_fault handle_mm_fault do_user_addr_fault exc_page_fault asm_exc_page_fault All processors that support broadcast TLB invalidation also have PCID support, so it is only the "nopcid" scenario that is of concern. In this situation just disable the broadcast TLB support using the CPUID dependency support by making X86_FEATURE_INVLPGB dependent on X86_FEATURE_PCID. [ bp: Massage commit message. ] | |||||
| CVE-2022-49309 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback() There is a deadlock in rtw_surveydone_event_callback(), which is shown below: (Thread 1) | (Thread 2) | _set_timer() rtw_surveydone_event_callback()| mod_timer() spin_lock_bh() //(1) | (wait a time) ... | rtw_scan_timeout_handler() del_timer_sync() | spin_lock_bh() //(2) (wait timer to stop) | ... We hold pmlmepriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need pmlmepriv->lock in position (2) of thread 2. As a result, rtw_surveydone_event_callback() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_bh(), which could let timer handler to obtain the needed lock. What`s more, we change spin_lock_bh() in rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise, spin_lock_bh() will also cause deadlock() in timer handler. | |||||
| CVE-2022-49296 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix possible deadlock when holding Fwb to get inline_data 1, mount with wsync. 2, create a file with O_RDWR, and the request was sent to mds.0: ceph_atomic_open()--> ceph_mdsc_do_request(openc) finish_open(file, dentry, ceph_open)--> ceph_open()--> ceph_init_file()--> ceph_init_file_info()--> ceph_uninline_data()--> { ... if (inline_version == 1 || /* initial version, no data */ inline_version == CEPH_INLINE_NONE) goto out_unlock; ... } The inline_version will be 1, which is the initial version for the new create file. And here the ci->i_inline_version will keep with 1, it's buggy. 3, buffer write to the file immediately: ceph_write_iter()--> ceph_get_caps(file, need=Fw, want=Fb, ...); generic_perform_write()--> a_ops->write_begin()--> ceph_write_begin()--> netfs_write_begin()--> netfs_begin_read()--> netfs_rreq_submit_slice()--> netfs_read_from_server()--> rreq->netfs_ops->issue_read()--> ceph_netfs_issue_read()--> { ... if (ci->i_inline_version != CEPH_INLINE_NONE && ceph_netfs_issue_op_inline(subreq)) return; ... } ceph_put_cap_refs(ci, Fwb); The ceph_netfs_issue_op_inline() will send a getattr(Fsr) request to mds.1. 4, then the mds.1 will request the rd lock for CInode::filelock from the auth mds.0, the mds.0 will do the CInode::filelock state transation from excl --> sync, but it need to revoke the Fxwb caps back from the clients. While the kernel client has aleady held the Fwb caps and waiting for the getattr(Fsr). It's deadlock! URL: https://tracker.ceph.com/issues/55377 | |||||
| CVE-2022-49294 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check if modulo is 0 before dividing. [How & Why] If a value of 0 is read, then this will cause a divide-by-0 panic. | |||||
| CVE-2022-49179 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: don't move oom_bfqq Our test report a UAF: [ 2073.019181] ================================================================== [ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584 [ 2073.019192] [ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5 [ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2073.019200] Call trace: [ 2073.019203] dump_backtrace+0x0/0x310 [ 2073.019206] show_stack+0x28/0x38 [ 2073.019210] dump_stack+0xec/0x15c [ 2073.019216] print_address_description+0x68/0x2d0 [ 2073.019220] kasan_report+0x238/0x2f0 [ 2073.019224] __asan_store8+0x88/0xb0 [ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019233] bfq_put_async_queues+0xbc/0x208 [ 2073.019236] bfq_pd_offline+0x178/0x238 [ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019244] bfq_exit_queue+0x128/0x178 [ 2073.019249] blk_mq_exit_sched+0x12c/0x160 [ 2073.019252] elevator_exit+0xc8/0xd0 [ 2073.019256] blk_exit_queue+0x50/0x88 [ 2073.019259] blk_cleanup_queue+0x228/0x3d8 [ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019274] null_exit+0x90/0x114 [null_blk] [ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019282] el0_svc_common+0xc8/0x320 [ 2073.019287] el0_svc_handler+0xf8/0x160 [ 2073.019290] el0_svc+0x10/0x218 [ 2073.019291] [ 2073.019294] Allocated by task 14163: [ 2073.019301] kasan_kmalloc+0xe0/0x190 [ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418 [ 2073.019308] bfq_pd_alloc+0x54/0x118 [ 2073.019313] blkcg_activate_policy+0x250/0x460 [ 2073.019317] bfq_create_group_hierarchy+0x38/0x110 [ 2073.019321] bfq_init_queue+0x6d0/0x948 [ 2073.019325] blk_mq_init_sched+0x1d8/0x390 [ 2073.019330] elevator_switch_mq+0x88/0x170 [ 2073.019334] elevator_switch+0x140/0x270 [ 2073.019338] elv_iosched_store+0x1a4/0x2a0 [ 2073.019342] queue_attr_store+0x90/0xe0 [ 2073.019348] sysfs_kf_write+0xa8/0xe8 [ 2073.019351] kernfs_fop_write+0x1f8/0x378 [ 2073.019359] __vfs_write+0xe0/0x360 [ 2073.019363] vfs_write+0xf0/0x270 [ 2073.019367] ksys_write+0xdc/0x1b8 [ 2073.019371] __arm64_sys_write+0x50/0x60 [ 2073.019375] el0_svc_common+0xc8/0x320 [ 2073.019380] el0_svc_handler+0xf8/0x160 [ 2073.019383] el0_svc+0x10/0x218 [ 2073.019385] [ 2073.019387] Freed by task 72584: [ 2073.019391] __kasan_slab_free+0x120/0x228 [ 2073.019394] kasan_slab_free+0x10/0x18 [ 2073.019397] kfree+0x94/0x368 [ 2073.019400] bfqg_put+0x64/0xb0 [ 2073.019404] bfqg_and_blkg_put+0x90/0xb0 [ 2073.019408] bfq_put_queue+0x220/0x228 [ 2073.019413] __bfq_put_async_bfqq+0x98/0x168 [ 2073.019416] bfq_put_async_queues+0xbc/0x208 [ 2073.019420] bfq_pd_offline+0x178/0x238 [ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019429] bfq_exit_queue+0x128/0x178 [ 2073.019433] blk_mq_exit_sched+0x12c/0x160 [ 2073.019437] elevator_exit+0xc8/0xd0 [ 2073.019440] blk_exit_queue+0x50/0x88 [ 2073.019443] blk_cleanup_queue+0x228/0x3d8 [ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019459] null_exit+0x90/0x114 [null_blk] [ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019467] el0_svc_common+0xc8/0x320 [ 2073.019471] el0_svc_handler+0xf8/0x160 [ 2073.019474] el0_svc+0x10/0x218 [ 2073.019475] [ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00 which belongs to the cache kmalloc-1024 of size 1024 [ 2073.019484] The buggy address is located 552 bytes inside of 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300) [ 2073.019486] The buggy address belongs to the page: [ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0 [ 2073.020123] flags: 0x7ffff0000008100(slab|head) [ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00 [ 2073.020409] ra ---truncated--- | |||||
| CVE-2022-49176 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bfq: fix use-after-free in bfq_dispatch_request KASAN reports a use-after-free report when doing normal scsi-mq test [69832.239032] ================================================================== [69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0 [69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155 [69832.244656] [69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8 [69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [69832.249069] Workqueue: kblockd blk_mq_run_work_fn [69832.250022] Call Trace: [69832.250541] dump_stack+0x9b/0xce [69832.251232] ? bfq_dispatch_request+0x1045/0x44b0 [69832.252243] print_address_description.constprop.6+0x3e/0x60 [69832.253381] ? __cpuidle_text_end+0x5/0x5 [69832.254211] ? vprintk_func+0x6b/0x120 [69832.254994] ? bfq_dispatch_request+0x1045/0x44b0 [69832.255952] ? bfq_dispatch_request+0x1045/0x44b0 [69832.256914] kasan_report.cold.9+0x22/0x3a [69832.257753] ? bfq_dispatch_request+0x1045/0x44b0 [69832.258755] check_memory_region+0x1c1/0x1e0 [69832.260248] bfq_dispatch_request+0x1045/0x44b0 [69832.261181] ? bfq_bfqq_expire+0x2440/0x2440 [69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170 [69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100 [69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570 [69832.267147] ? __switch_to+0x5f4/0xee0 [69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.268946] __blk_mq_run_hw_queue+0xc0/0x270 [69832.269840] blk_mq_run_work_fn+0x51/0x60 [69832.278170] process_one_work+0x6d4/0xfe0 [69832.278984] worker_thread+0x91/0xc80 [69832.279726] ? __kthread_parkme+0xb0/0x110 [69832.280554] ? process_one_work+0xfe0/0xfe0 [69832.281414] kthread+0x32d/0x3f0 [69832.282082] ? kthread_park+0x170/0x170 [69832.282849] ret_from_fork+0x1f/0x30 [69832.283573] [69832.283886] Allocated by task 7725: [69832.284599] kasan_save_stack+0x19/0x40 [69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0 [69832.286350] kmem_cache_alloc_node+0x13f/0x460 [69832.287237] bfq_get_queue+0x3d4/0x1140 [69832.287993] bfq_get_bfqq_handle_split+0x103/0x510 [69832.289015] bfq_init_rq+0x337/0x2d50 [69832.289749] bfq_insert_requests+0x304/0x4e10 [69832.290634] blk_mq_sched_insert_requests+0x13e/0x390 [69832.291629] blk_mq_flush_plug_list+0x4b4/0x760 [69832.292538] blk_flush_plug_list+0x2c5/0x480 [69832.293392] io_schedule_prepare+0xb2/0xd0 [69832.294209] io_schedule_timeout+0x13/0x80 [69832.295014] wait_for_common_io.constprop.1+0x13c/0x270 [69832.296137] submit_bio_wait+0x103/0x1a0 [69832.296932] blkdev_issue_discard+0xe6/0x160 [69832.297794] blk_ioctl_discard+0x219/0x290 [69832.298614] blkdev_common_ioctl+0x50a/0x1750 [69832.304715] blkdev_ioctl+0x470/0x600 [69832.305474] block_ioctl+0xde/0x120 [69832.306232] vfs_ioctl+0x6c/0xc0 [69832.306877] __se_sys_ioctl+0x90/0xa0 [69832.307629] do_syscall_64+0x2d/0x40 [69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [69832.309382] [69832.309701] Freed by task 155: [69832.310328] kasan_save_stack+0x19/0x40 [69832.311121] kasan_set_track+0x1c/0x30 [69832.311868] kasan_set_free_info+0x1b/0x30 [69832.312699] __kasan_slab_free+0x111/0x160 [69832.313524] kmem_cache_free+0x94/0x460 [69832.314367] bfq_put_queue+0x582/0x940 [69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0 [69832.317275] bfq_bfqq_expire+0xb27/0x2440 [69832.318084] bfq_dispatch_request+0x697/0x44b0 [69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.322225] __blk_mq_run_hw_queue+0xc0/0x270 [69832.323114] blk_mq_run_work_fn+0x51/0x6 ---truncated--- | |||||
| CVE-2022-49170 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on curseg->alloc_type As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215657 - Overview UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image - Reproduce tested on kernel 5.17-rc4, 5.17-rc6 1. mkdir test_crash 2. cd test_crash 3. unzip tmp2.zip 4. mkdir mnt 5. ./single_test.sh f2fs 2 - Kernel dump [ 46.434454] loop0: detected capacity change from 0 to 131072 [ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version = 7548c2d9 [ 46.738319] ================================================================================ [ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 [ 46.738475] index 231 is out of range for type 'unsigned int [2]' [ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1 [ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 46.738551] Call Trace: [ 46.738556] <TASK> [ 46.738563] dump_stack_lvl+0x47/0x5c [ 46.738581] ubsan_epilogue+0x5/0x50 [ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80 [ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs] [ 46.738819] do_write_page+0xef/0x210 [f2fs] [ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs] [ 46.739038] __write_node_page+0x2b7/0x920 [f2fs] [ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs] [ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs] [ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs] [ 46.739507] deactivate_locked_super+0x60/0xc0 [ 46.739517] deactivate_super+0x70/0xb0 [ 46.739524] cleanup_mnt+0x11a/0x200 [ 46.739532] __cleanup_mnt+0x16/0x20 [ 46.739538] task_work_run+0x67/0xa0 [ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0 [ 46.739559] syscall_exit_to_user_mode+0x26/0x40 [ 46.739568] do_syscall_64+0x46/0xb0 [ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is we missed to do sanity check on curseg->alloc_type, result in out-of-bound accessing on sbi->block_count[] array, fix it. | |||||