Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-64147 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: fix debugfs_lookup dentry leak and error handling debugfs_lookup() returns a dentry with an elevated reference count that must be released with dput(). The current code discards the returned dentry without calling dput(), causing a reference leak on every firmware reset recovery. Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup() returns ERR_PTR(-ENODEV), not NULL. The current check passes for error pointers and would call dput() on an invalid pointer, causing a crash. | |||||
| CVE-2026-10571 | 4 Apple, Ibm, Linux and 1 more | 7 Macos, Aix, I and 4 more | 2026-08-17 | N/A | 5.7 MEDIUM |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 is affected by a denial of service caused by insecure deserialization. A low-privileged, administrative user could exploit this vulnerability to consume system resources when the restConnector-2.0 feature is enabled. | |||||
| CVE-2026-14525 | 4 Apple, Ibm, Linux and 1 more | 7 Macos, Aix, I and 4 more | 2026-08-17 | N/A | 9.4 CRITICAL |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 IBM WebSphere Application Server Liberty is vulnerable to an authentication bypass when the rtcomm-1.0 or rtcommGateway-1.0 feature is enabled. | |||||
| CVE-2026-64148 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery. | |||||
| CVE-2026-64149 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dma-mapping: move dma_map_resource() sanity check into debug code dma_map_resource() uses pfn_valid() to ensure the range is not RAM. However, pfn_valid() only checks for availability of the memory map for a PFN but it does not ensure that the PFN is actually backed by RAM. On ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that share a section with RAM will falsely trigger the WARN_ON_ONCE and cause dma_map_resource() to return DMA_MAPPING_ERROR. This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because the SPI FIFO register (0xfe204004) falls in the same sparsemem section as the end of RAM (0xf8000000-0xfbffffff), both in section 31 (0xf8000000-0xffffffff). Move the sanity check from dma_map_resource() into debug_dma_map_phys() and replace the unreliable pfn_valid() with pfn_valid() && !PageReserved(), which correctly identifies actual usable RAM without false positives for MMIO regions that happen to have struct pages. Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check applies equally to both APIs. Any non-reserved page represents kernel memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost certainly wrong and risks breaking coherency on non-coherent platforms. ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have PageReserved set, so they will not trigger a false positive. The check no longer blocks the mapping and uses err_printk() to integrate with dma-debug filtering. | |||||
| CVE-2026-64150 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: release local_lock before re-enabling softirqs Quoting sashiko: In the error path, local_bh_enable() is called before local_unlock_nested_bh(). | |||||
| CVE-2026-64151 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 8.4 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap Sashiko pointed out that the driver could drop PAGE_SIZE from the pgsize_bitmap. That is technically allowed but nothing does it, and such an iommu_domain would not be used with the DMA API today. Still, it is against the design and it is trivial to fix up. Lift the PT_WARN_ON to the if branch and just skip the fast path. | |||||
| CVE-2026-64152 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iommu: Handle unmap error when iommu_debug is enabled Sashiko noticed a latent bug where the map error flow called iommu_unmap() which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however since this is an error path the map flow never actually established the original iommu_debug_map() it will malfunction. Lift the unmap error handling into iommu_map_nosync() and reorder it so the trace_map()/iommu_debug_map() records the partial mapping and then immediately unmaps it. This avoid creating the unbalanced tracking and provides saner tracing instead of a unmap unmatched to any map. | |||||
| CVE-2026-64153 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. Store the return value in the appropriate type and in case of error, return it rather than WARNing. Patchwork: https://patchwork.freedesktop.org/patch/719685/ | |||||
| CVE-2026-64157 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix partial invalidation of streaming-write folio In netfs_invalidate_folio(), if the region of a partial invalidation overlaps the front (but not all) of a dirty write cached in a streaming write page (dirty, but not uptodate, with the dirty region tracked by a netfs_folio struct), the function modifies the dirty region - but incorrectly as it moves the region forward by setting the start to the start, not the end, of the invalidation region. Fix this by setting finfo->dirty_offset to the end of the invalidation region (iend). | |||||
| CVE-2026-64297 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: module: decompress: check return value of module_extend_max_pages() module_extend_max_pages() calls kvrealloc() internally and returns -ENOMEM on allocation failure. The return value is never checked. If the initial allocation fails, info->pages remains NULL and info->max_pages remains 0. Subsequent calls to module_get_next_page() will attempt to dynamically grow the array by calling module_extend_max_pages(info, 0) since info->used_pages is 0. This results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel oops. Fix: add the missing error check after module_extend_max_pages() and return immediately on failure. This matches the pattern used by every other kvrealloc() caller in the module loading path. [Sami: Corrected the analysis in the commit message.] | |||||
| CVE-2026-64295 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm: page_ext: add count limit to page_ext_iter_next to prevent invalid PFN access The page_ext iteration API does not validate if the PFN still belongs to a valid section while advancing the iterator. When dynamically adding memory in the hotplug path, it can lead to a NULL pointer dereference during page_ext_lookup at the boundary of the last valid section when iterator count equals __pgcount. The for_each_page_ext() macro calls page_ext_iter_next() as its loop increment. for_each_page_ext() does a "__page_ext = page_ext_iter_next(&__iter)" at the end. This causes page_ext_iter_next() to increment iter->index past __pgcount and call page_ext_lookup(start_pfn + __pgcount). During memory hotplug (online), the PFN at start_pfn + __pgcount may belong to a section that has not yet been initialized, causing page_ext_lookup() to trigger a NULL pointer dereference. [ 14.555124][ T846] Call trace: [ 14.555125][ T846] lookup_page_ext+0x6c/0x108 (P) [ 14.555127][ T846] page_ext_lookup+0x30/0x3c [ 14.555129][ T846] __reset_page_owner+0x11c/0x260 [ 14.571201][ T846] __free_pages_ok+0x5e8/0x8e0 [ 14.571204][ T846] __free_pages_core+0x78/0xf0 [ 14.571206][ T846] generic_online_page+0x14/0x24 [ 14.597782][ T846] online_pages+0x178/0x30c [ 14.597784][ T846] memory_block_change_state+0x284/0x32c [ 14.597787][ T846] memory_subsys_online+0x4c/0x64 [ 14.597789][ T846] device_online+0x88/0xb0 [ 14.597791][ T846] online_memory_block+0x30/0x40 [ 14.597793][ T846] walk_memory_blocks+0xac/0xe8 [ 14.597794][ T846] add_memory_resource+0x280/0x298 [ 14.656161][ T846] add_memory+0x60/0x98 Move the iteration boundary enforcement inside the iterator functions, so callers cannot inadvertently access beyond the requested range. | |||||
| CVE-2026-64288 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Avoid dereferencing NULL VNCR pseudo-TLB VNCR TLB invalidation occurs from MMU notifiers or TLBI instructions, and either can race against a vcpu not being onlined yet (no pseudo-TLB allocated). Similarly, the TLB might be invalid, and the invalidation should be skipped in this case. Both kvm_invalidate_vncr_ipa() and kvm_invalidate_vncr_va() are expected to perform the same checks, except that the latter doesn't check for the allocation and blindly dereferences the pointer. Solve this by introducing a new iterator built on top of the usual kvm_for_each_vcpu() that checks for both of the above conditions, and convert the two users to it. | |||||
| CVE-2026-64285 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Pin source page for write when adding CPUID data for SNP guest When populating a guest_memfd instance with the initial CPUID data for an SNP guest, acquire a writable pin on the source page as KVM will write back the "correct" CPUID information if the userspace provided data is rejected by trusted firmware. Because KVM writes to the source page using a kernel mapping, pinning for read could result in KVM clobbering read-only memory. Note, well-behaved VMMs are unlikely to be affected, as CPUID information is almost always dynamically generated by userspace, i.e. it's unlikely for the CPUID information to be backed by a read-only mapping. [sean: rewrite shortlog and changelog, tag for stable@] | |||||
| CVE-2026-64282 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Don't leak PFN when kvm_translate_vncr() races MMU notifier In the case that kvm_translate_vncr() races with an MMU notifier the early return does not release a reference on the faulted in PFN. Add the necessary call to kvm_release_faultin_page() for the unused PFN. | |||||
| CVE-2026-64281 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: wake sq waiters when the transport closes Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state across transport teardown, pinning svc_xprt references and blocking svc_rdma_free(). The close path sets XPT_CLOSE before invoking xpo_detach and both wait_event predicates include an XPT_CLOSE term, but the predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has no completion-driven wake path; it is advanced solely by the chained ticket handoff inside svc_rdma_sq_wait() itself. Without an explicit wake at close, parked threads never observe XPT_CLOSE, hold their svc_xprt_get reference forever, and svc_rdma_free() blocks on xpt_ref dropping to zero. Two close entry points reach this transport. Local teardown runs svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() -> xpo_detach() on a worker thread. A remote disconnect arrives at svc_rdma_cma_handler(), which calls svc_xprt_deferred_close(): that sets XPT_CLOSE and enqueues the transport but does not access either RDMA waitqueue, so a worker already parked in svc_rdma_sq_wait() never re-evaluates its predicate. With every worker parked on this transport, no thread is available to run the local teardown either, and the wake site there is unreachable. Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper that calls svc_xprt_deferred_close() and then wakes both sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers that called svc_xprt_deferred_close() directly: svc_rdma_cma_handler(), qp_event_handler(), svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop path, the rw completion error paths, and the recvfrom flush and read-list error paths. Wake both waitqueues from svc_rdma_detach() as well. The synchronous svc_xprt_close() path (backchannel ENOTCONN, device removal via svc_rdma_xprt_done) reaches detach without flowing through svc_xprt_deferred_close() and therefore does not invoke the new helper. [ cel: add svc_rdma_xprt_deferred_close() to complete the fix ] | |||||
| CVE-2026-64278 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: i2c: imx-lpi2c: mark I2C adapter when hardware is powered down On some i.MX platforms, certain I2C client drivers keep a periodic workqueue which continues to trigger I2C transfers. During system suspend/resume, there exists a time window between: - suspend_noirq and the system entering suspend - the system starting to resume and resume_noirq In this window, the I2C controller resources such as clock and pinctrl may already be disabled or not yet restored. If a workqueue triggers an I2C transfer in this period, the driver attempts to access I2C registers while the hardware resources are unavailable, which may lead to system hang. Mark the I2C adapter as suspended during noirq suspend and block new transfers until resume, ensuring that I2C transfers are only issued when hardware resources are available. | |||||
| CVE-2026-64267 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fuse: avoid 32-bit prune notification count wrap FUSE_NOTIFY_PRUNE validates the nodeid payload length with: size - sizeof(outarg) != outarg.count * sizeof(u64) On 32-bit kernels, size_t is also 32 bits, so the daemon-controlled count multiplication can wrap. A prune notification with count 0x20000000 and no nodeid payload passes the check, enters the copy loop, and asks the device copy path to read nodeids that are not present in the userspace write buffer. In QEMU this reaches the fuse_copy_fill() BUG_ON(!err) path. Validate the payload length with array_size() instead. That accepts exactly the same valid messages, but avoids wrapping arithmetic before the copy loop consumes the count. | |||||
| CVE-2026-64265 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req When fuse_resend() moves a request from fpq->processing back to fiq->pending, it sets FR_PENDING and clears FR_SENT but does not remove the requests intr_entry from fiq->interrupts. If the request had FR_INTERRUPTED set from a prior signal, intr_entry remains dangling on fiq->interrupts. When the requesting task then receives a fatal signal, fuse_remove_pending_req() sees FR_PENDING=1, removes the request from fiq->pending and frees it via the refcount path, also without cleaning intr_entry. The stale intr_entry causes use-after-free when fuse_read_interrupt() iterates fiq->interrupts: - list_del_init(&req->intr_entry) -> UAF write on freed slab - req->in.h.unique -> UAF read, data leaked to userspace Remove intr_entry from fiq->interrupts in fuse_resend() for interrupted requests before they are placed back on fiq->pending. Add a WARN_ON if the intr_entry is not empty on request destruction. | |||||
| CVE-2026-64264 | 1 Linux | 1 Linux Kernel | 2026-08-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix EFAULT clobber in fuse_uring_commit copy_from_user() returns the number of bytes not copied as an unsigned residual on failure (1..sizeof(struct fuse_out_header)). fuse_uring_commit stores that residual in ssize_t err, sets req->out.h.error to -EFAULT, then jumps to out: with err still holding the positive residual. err = copy_from_user(&req->out.h, &ent->headers->in_out, sizeof(req->out.h)); if (err) { req->out.h.error = -EFAULT; goto out; /* err is the positive residual */ } ... out: fuse_uring_req_end(ent, req, err); fuse_uring_req_end() then runs if (error) req->out.h.error = error; which overwrites the just-assigned -EFAULT with the positive residual. FUSE callers such as fuse_simple_request() test err < 0 to detect failure, so the positive value is interpreted as success and the caller proceeds with an uninitialised or partial req->out.args. Fix by assigning err = -EFAULT in the failure branch before jumping to out, so fuse_uring_req_end() receives a negative errno and sets req->out.h.error to -EFAULT. | |||||