Total
19639 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-26873 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Fix a deadlock issue related to automatic dump If we issue a disabling PHY command, the device attached with it will go offline, if a 2 bit ECC error occurs at the same time, a hung task may be found: [ 4613.652388] INFO: task kworker/u256:0:165233 blocked for more than 120 seconds. [ 4613.666297] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.674809] task:kworker/u256:0 state:D stack: 0 pid:165233 ppid: 2 flags:0x00000208 [ 4613.683959] Workqueue: 0000:74:02.0_disco_q sas_revalidate_domain [libsas] [ 4613.691518] Call trace: [ 4613.694678] __switch_to+0xf8/0x17c [ 4613.698872] __schedule+0x660/0xee0 [ 4613.703063] schedule+0xac/0x240 [ 4613.706994] schedule_timeout+0x500/0x610 [ 4613.711705] __down+0x128/0x36c [ 4613.715548] down+0x240/0x2d0 [ 4613.719221] hisi_sas_internal_abort_timeout+0x1bc/0x260 [hisi_sas_main] [ 4613.726618] sas_execute_internal_abort+0x144/0x310 [libsas] [ 4613.732976] sas_execute_internal_abort_dev+0x44/0x60 [libsas] [ 4613.739504] hisi_sas_internal_task_abort_dev.isra.0+0xbc/0x1b0 [hisi_sas_main] [ 4613.747499] hisi_sas_dev_gone+0x174/0x250 [hisi_sas_main] [ 4613.753682] sas_notify_lldd_dev_gone+0xec/0x2e0 [libsas] [ 4613.759781] sas_unregister_common_dev+0x4c/0x7a0 [libsas] [ 4613.765962] sas_destruct_devices+0xb8/0x120 [libsas] [ 4613.771709] sas_do_revalidate_domain.constprop.0+0x1b8/0x31c [libsas] [ 4613.778930] sas_revalidate_domain+0x60/0xa4 [libsas] [ 4613.784716] process_one_work+0x248/0x950 [ 4613.789424] worker_thread+0x318/0x934 [ 4613.793878] kthread+0x190/0x200 [ 4613.797810] ret_from_fork+0x10/0x18 [ 4613.802121] INFO: task kworker/u256:4:316722 blocked for more than 120 seconds. [ 4613.816026] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.824538] task:kworker/u256:4 state:D stack: 0 pid:316722 ppid: 2 flags:0x00000208 [ 4613.833670] Workqueue: 0000:74:02.0 hisi_sas_rst_work_handler [hisi_sas_main] [ 4613.841491] Call trace: [ 4613.844647] __switch_to+0xf8/0x17c [ 4613.848852] __schedule+0x660/0xee0 [ 4613.853052] schedule+0xac/0x240 [ 4613.856984] schedule_timeout+0x500/0x610 [ 4613.861695] __down+0x128/0x36c [ 4613.865542] down+0x240/0x2d0 [ 4613.869216] hisi_sas_controller_prereset+0x58/0x1fc [hisi_sas_main] [ 4613.876324] hisi_sas_rst_work_handler+0x40/0x8c [hisi_sas_main] [ 4613.883019] process_one_work+0x248/0x950 [ 4613.887732] worker_thread+0x318/0x934 [ 4613.892204] kthread+0x190/0x200 [ 4613.896118] ret_from_fork+0x10/0x18 [ 4613.900423] INFO: task kworker/u256:1:348985 blocked for more than 121 seconds. [ 4613.914341] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4613.922852] task:kworker/u256:1 state:D stack: 0 pid:348985 ppid: 2 flags:0x00000208 [ 4613.931984] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas] [ 4613.939549] Call trace: [ 4613.942702] __switch_to+0xf8/0x17c [ 4613.946892] __schedule+0x660/0xee0 [ 4613.951083] schedule+0xac/0x240 [ 4613.955015] schedule_timeout+0x500/0x610 [ 4613.959725] wait_for_common+0x200/0x610 [ 4613.964349] wait_for_completion+0x3c/0x5c [ 4613.969146] flush_workqueue+0x198/0x790 [ 4613.973776] sas_porte_broadcast_rcvd+0x1e8/0x320 [libsas] [ 4613.979960] sas_port_event_worker+0x54/0xa0 [libsas] [ 4613.985708] process_one_work+0x248/0x950 [ 4613.990420] worker_thread+0x318/0x934 [ 4613.994868] kthread+0x190/0x200 [ 4613.998800] ret_from_fork+0x10/0x18 This is because when the device goes offline, we obtain the hisi_hba semaphore and send the ABORT_DEV command to the device. However, the internal abort timed out due to the 2 bit ECC error and triggers automatic dump. In addition, since the hisi_hba semaphore has been obtained, the dump cannot be executed and the controller cannot be reset. Therefore, the deadlocks occur on the following circular dependencies ---truncated--- | |||||
| CVE-2024-26869 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate meta inode pages forcely Below race case can cause data corruption: Thread A GC thread - gc_data_segment - ra_data_block - locked meta_inode page - f2fs_inplace_write_data - invalidate_mapping_pages : fail to invalidate meta_inode page due to lock failure or dirty|writeback status - f2fs_submit_page_bio : write last dirty data to old blkaddr - move_data_block - load old data from meta_inode page - f2fs_submit_page_write : write old data to new blkaddr Because invalidate_mapping_pages() will skip invalidating page which has unclear status including locked, dirty, writeback and so on, so we need to use truncate_inode_pages_range() instead of invalidate_mapping_pages() to make sure meta_inode page will be dropped. | |||||
| CVE-2024-26866 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: lpspi: Avoid potential use-after-free in probe() fsl_lpspi_probe() is allocating/disposing memory manually with spi_alloc_host()/spi_alloc_target(), but uses devm_spi_register_controller(). In case of error after the latter call the memory will be explicitly freed in the probe function by spi_controller_put() call, but used afterwards by "devm" management outside probe() (spi_unregister_controller() <- devm_spi_unregister() below). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070 ... Call trace: kernfs_find_ns kernfs_find_and_get_ns sysfs_remove_group sysfs_remove_groups device_remove_attrs device_del spi_unregister_controller devm_spi_unregister release_nodes devres_release_all really_probe driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork | |||||
| CVE-2024-26841 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Update cpu_sibling_map when disabling nonboot CPUs Update cpu_sibling_map when disabling nonboot CPUs by defining & calling clear_cpu_sibling_map(), otherwise we get such errors on SMT systems: jump label: negative count! WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100 CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20 a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280 a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001 t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000 t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964 t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8 s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040 s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006 ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000 90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0 900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001 0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0 0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f 6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000 900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000 0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4 0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c ... Call Trace: [<9000000000224528>] show_stack+0x48/0x1a0 [<900000000179afc8>] dump_stack_lvl+0x78/0xa0 [<9000000000263ed0>] __warn+0x90/0x1a0 [<90000000017419b8>] report_bug+0x1b8/0x280 [<900000000179c564>] do_bp+0x264/0x420 [<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100 [<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300 [<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0 [<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240 [<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0 [<900000000029a720>] kthread+0x140/0x160 [<9000000000222288>] ret_from_kernel_thread+0xc/0xa4 | |||||
| CVE-2024-26828 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 9.4 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix underflow in parse_server_interfaces() In this loop, we step through the buffer and after each item we check if the size_left is greater than the minimum size we need. However, the problem is that "bytes_left" is type ssize_t while sizeof() is type size_t. That means that because of type promotion, the comparison is done as an unsigned and if we have negative bytes left the loop continues instead of ending. | |||||
| CVE-2024-26799 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix uninitialized pointer dmactl In the case where __lpass_get_dmactl_handle is called and the driver id dai_id is invalid the pointer dmactl is not being assigned a value, and dmactl contains a garbage value since it has not been initialized and so the null check may not work. Fix this to initialize dmactl to NULL. One could argue that modern compilers will set this to zero, but it is useful to keep this initialized as per the same way in functions __lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params. Cleans up clang scan build warning: sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition evaluates to a garbage value [core.uninitialized.Branch] | |||||
| CVE-2024-26740 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: use the backlog for mirred ingress The test Davide added in commit ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress -> ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround does not seem to address the issue. | |||||
| CVE-2024-26690 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: protect updates of 64-bit statistics counters As explained by a comment in <linux/u64_stats_sync.h>, write side of struct u64_stats_sync must ensure mutual exclusion, or one seqcount update could be lost on 32-bit platforms, thus blocking readers forever. Such lockups have been observed in real world after stmmac_xmit() on one CPU raced with stmmac_napi_poll_tx() on another CPU. To fix the issue without introducing a new lock, split the statics into three parts: 1. fields updated only under the tx queue lock, 2. fields updated only during NAPI poll, 3. fields updated only from interrupt context, Updates to fields in the first two groups are already serialized through other locks. It is sufficient to split the existing struct u64_stats_sync so that each group has its own. Note that tx_set_ic_bit is updated from both contexts. Split this counter so that each context gets its own, and calculate their sum to get the total value in stmmac_get_ethtool_stats(). For the third group, multiple interrupts may be processed by different CPUs at the same time, but interrupts on the same CPU will not nest. Move fields from this group to a newly created per-cpu struct stmmac_pcpu_stats. | |||||
| CVE-2024-26677 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix delayed ACKs to not set the reference serial number Fix the construction of delayed ACKs to not set the reference serial number as they can't be used as an RTT reference. | |||||
| CVE-2024-26670 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't quite right, as it is supposed to be applied after the last explicit memory access, but is immediately followed by an LDR. The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295, which are described in: * https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en * https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en In both cases the workaround is described as: | If pagetable isolation is disabled, the context switch logic in the | kernel can be updated to execute the following sequence on affected | cores before exiting to EL0, and after all explicit memory accesses: | | 1. A non-shareable TLBI to any context and/or address, including | unused contexts or addresses, such as a `TLBI VALE1 Xzr`. | | 2. A DSB NSH to guarantee completion of the TLBI. The important part being that the TLBI+DSB must be placed "after all explicit memory accesses". Unfortunately, as-implemented, the TLBI+DSB is immediately followed by an LDR, as we have: | alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD | tlbi vale1, xzr | dsb nsh | alternative_else_nop_endif | alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0 | ldr lr, [sp, #S_LR] | add sp, sp, #PT_REGS_SIZE // restore sp | eret | alternative_else_nop_endif | | [ ... KPTI exception return path ... ] This patch fixes this by reworking the logic to place the TLBI+DSB immediately before the ERET, after all explicit memory accesses. The ERET is currently in a separate alternative block, and alternatives cannot be nested. To account for this, the alternative block for ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch to skip the KPTI logic, with the new shape of the logic being: | alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0 | [ ... KPTI exception return path ... ] | .L_skip_tramp_exit_\@: | | ldr lr, [sp, #S_LR] | add sp, sp, #PT_REGS_SIZE // restore sp | | alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD | tlbi vale1, xzr | dsb nsh | alternative_else_nop_endif | eret The new structure means that the workaround is only applied when KPTI is not in use; this is fine as noted in the documented implications of the erratum: | Pagetable isolation between EL0 and higher level ELs prevents the | issue from occurring. ... and as per the workaround description quoted above, the workaround is only necessary "If pagetable isolation is disabled". | |||||
| CVE-2024-26669 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: flower: Fix chain template offload When a qdisc is deleted from a net device the stack instructs the underlying driver to remove its flow offload callback from the associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack then continues to replay the removal of the filters in the block for this driver by iterating over the chains in the block and invoking the 'reoffload' operation of the classifier being used. In turn, the classifier in its 'reoffload' operation prepares and emits a 'FLOW_CLS_DESTROY' command for each filter. However, the stack does not do the same for chain templates and the underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when a qdisc is deleted. This results in a memory leak [1] which can be reproduced using [2]. Fix by introducing a 'tmplt_reoffload' operation and have the stack invoke it with the appropriate arguments as part of the replay. Implement the operation in the sole classifier that supports chain templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}' command based on whether a flow offload callback is being bound to a filter block or being unbound from one. As far as I can tell, the issue happens since cited commit which reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains() in __tcf_block_put(). The order cannot be reversed as the filter block is expected to be freed after flushing all the chains. [1] unreferenced object 0xffff888107e28800 (size 2048): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[...... 01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................ backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab374e>] __kmalloc+0x4e/0x90 [<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0 unreferenced object 0xffff88816d2c0400 (size 1024): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): 40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8..... 10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m.... backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90 [<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0 [<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0 [<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [2] # tc qdisc add dev swp1 clsact # tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32 # tc qdisc del dev ---truncated--- | |||||
| CVE-2024-26662 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()' 'panel_cntl' structure used to control the display panel could be null, dereferencing it could lead to a null pointer access. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250) | |||||
| CVE-2024-26661 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()' In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL. | |||||
| CVE-2024-26589 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited". | |||||
| CVE-2023-53651 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Input: exc3000 - properly stop timer on shutdown We need to stop the timer on driver unbind or probe failures, otherwise we get UAF/Oops. | |||||
| CVE-2023-53523 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB. | |||||
| CVE-2023-53447 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: don't reset unchangable mount option in f2fs_remount() syzbot reports a bug as below: general protection fault, probably for non-canonical address 0xdffffc0000000009: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:__lock_acquire+0x69/0x2000 kernel/locking/lockdep.c:4942 Call Trace: lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5691 __raw_write_lock include/linux/rwlock_api_smp.h:209 [inline] _raw_write_lock+0x2e/0x40 kernel/locking/spinlock.c:300 __drop_extent_tree+0x3ac/0x660 fs/f2fs/extent_cache.c:1100 f2fs_drop_extent_tree+0x17/0x30 fs/f2fs/extent_cache.c:1116 f2fs_insert_range+0x2d5/0x3c0 fs/f2fs/file.c:1664 f2fs_fallocate+0x4e4/0x6d0 fs/f2fs/file.c:1838 vfs_fallocate+0x54b/0x6b0 fs/open.c:324 ksys_fallocate fs/open.c:347 [inline] __do_sys_fallocate fs/open.c:355 [inline] __se_sys_fallocate fs/open.c:353 [inline] __x64_sys_fallocate+0xbd/0x100 fs/open.c:353 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is race condition as below: - since it tries to remount rw filesystem, so that do_remount won't call sb_prepare_remount_readonly to block fallocate, there may be race condition in between remount and fallocate. - in f2fs_remount(), default_options() will reset mount option to default one, and then update it based on result of parse_options(), so there is a hole which race condition can happen. Thread A Thread B - f2fs_fill_super - parse_options - clear_opt(READ_EXTENT_CACHE) - f2fs_remount - default_options - set_opt(READ_EXTENT_CACHE) - f2fs_fallocate - f2fs_insert_range - f2fs_drop_extent_tree - __drop_extent_tree - __may_extent_tree - test_opt(READ_EXTENT_CACHE) return true - write_lock(&et->lock) access NULL pointer - parse_options - clear_opt(READ_EXTENT_CACHE) | |||||
| CVE-2023-53394 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix crash on regular rq reactivation When the regular rq is reactivated after the XSK socket is closed it could be reading stale cqes which eventually corrupts the rq. This leads to no more traffic being received on the regular rq and a crash on the next close or deactivation of the rq. Kal Cuttler Conely reported this issue as a crash on the release path when the xdpsock sample program is stopped (killed) and restarted in sequence while traffic is running. This patch flushes all cqes when during the rq flush. The cqe flushing is done in the reset state of the rq. mlx5e_rq_to_ready code is moved into the flush function to allow for this. | |||||
| CVE-2023-53261 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: coresight: Fix memory leak in acpi_buffer->pointer There are memory leaks reported by kmemleak: ... unreferenced object 0xffff00213c141000 (size 1024): comm "systemd-udevd", pid 2123, jiffies 4294909467 (age 6062.160s) hex dump (first 32 bytes): 04 00 00 00 02 00 00 00 18 10 14 3c 21 00 ff ff ...........<!... 00 00 00 00 00 00 00 00 03 00 00 00 10 00 00 00 ................ backtrace: [<000000004b7c9001>] __kmem_cache_alloc_node+0x2f8/0x348 [<00000000b0fc7ceb>] __kmalloc+0x58/0x108 [<0000000064ff4695>] acpi_os_allocate+0x2c/0x68 [<000000007d57d116>] acpi_ut_initialize_buffer+0x54/0xe0 [<0000000024583908>] acpi_evaluate_object+0x388/0x438 [<0000000017b2e72b>] acpi_evaluate_object_typed+0xe8/0x240 [<000000005df0eac2>] coresight_get_platform_data+0x1b4/0x988 [coresight] ... The ACPI buffer memory (buf.pointer) should be freed. But the buffer is also used after returning from acpi_get_dsd_graph(). Move the temporary variables buf to acpi_coresight_parse_graph(), and free it before the function return to prevent memory leak. | |||||
| CVE-2023-53149 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid deadlock in fs reclaim with page writeback Ext4 has a filesystem wide lock protecting ext4_writepages() calls to avoid races with switching of journalled data flag or inode format. This lock can however cause a deadlock like: CPU0 CPU1 ext4_writepages() percpu_down_read(sbi->s_writepages_rwsem); ext4_change_inode_journal_flag() percpu_down_write(sbi->s_writepages_rwsem); - blocks, all readers block from now on ext4_do_writepages() ext4_init_io_end() kmem_cache_zalloc(io_end_cachep, GFP_KERNEL) fs_reclaim frees dentry... dentry_unlink_inode() iput() - last ref => iput_final() - inode dirty => write_inode_now()... ext4_writepages() tries to acquire sbi->s_writepages_rwsem and blocks forever Make sure we cannot recurse into filesystem reclaim from writeback code to avoid the deadlock. | |||||