Total
19304 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-46185 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in symlink_data() Since smb2_check_message() returns success without length validation for the symlink error response, in symlink_data() it is possible for iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer only contains the base SMB2 header (64 bytes), accessing err->ErrorContextCount (at offset 66) or err->ByteCount later in symlink_data() will cause an out-of-bounds read. | |||||
| CVE-2026-46184 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sound: ua101: fix division by zero at probe Add a missing sanity check for bNrChannels in detect_usb_format() to prevent a division by zero in playback_urb_complete() and capture_urb_complete(). USB core does not validate class-specific descriptor fields such as bNrChannels, so drivers must verify them before use. If a device provides bNrChannels = 0, frame_bytes becomes zero and is later used as a divisor in the URB completion handlers, leading to a kernel crash. | |||||
| CVE-2026-46183 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: protect path kfree() with damon_sysfs_lock damon_sysfs_quot_goal->path can be read and written by users, via DAMON sysfs 'path' file. It can also be indirectly read, for the parameters {on,off}line committing to DAMON. The reads for parameters committing are protected by damon_sysfs_lock to avoid the sysfs files being destroyed while any of the parameters are being read. But the user-driven direct reads and writes are not protected by any lock, while the write is deallocating the path-pointing buffer. As a result, the readers could read the already freed buffer (user-after-free). Note that the user-reads don't race when the same open file is used by the writer, due to kernfs's open file locking. Nonetheless, doing the reads and writes with separate open files would be common. Fix it by protecting both the user-direct reads and writes with damon_sysfs_lock. | |||||
| CVE-2026-46182 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace The hdr variable is allocated on the stack and only hdr.version and hdr.flags are initialized explicitly. Because the struct papr_hvpipe_hdr contains reserved padding bytes (reserved[3] and reserved2[40]), these could leak the uninitialized bytes to userspace after copy_to_user(). This patch fixes that by initializing the whole struct to 0. | |||||
| CVE-2026-46179 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Don't allow pointer operations on unconfigured streams When reporting the pointer for a compressed stream we report the current I/O frame position by dividing the position by the number of channels multiplied by the number of container bytes. These values default to 0 and are only configured as part of setting the stream parameters so this allows a divide by zero to be configured. Validate that they are non zero, returning an error if not | |||||
| CVE-2026-46178 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq() Sashiko points out that mlx4_srq_alloc() was not undone during error unwind, add the missing call to mlx4_srq_free(). | |||||
| CVE-2026-46177 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Add limits to event and receive message requests The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs. | |||||
| CVE-2026-46175 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by FGGC of node block During FGGC node block migration, fsck may incorrectly treat the migrated node block as fsync-written data. The reproduction scenario: root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync root@vm:/mnt/f2fs# rm -f 1 root@vm:/mnt/f2fs# sync root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The root cause is that GC does not clear the dentry mark and fsync mark during node block migration, leading fsck to misinterpret them as user-issued fsync writes. In BGGC mode, node block migration is handled by f2fs_sync_node_pages(), which guarantees the dentry and fsync marks are cleared before writing. This patch move the set/clear of the fsync|dentry marks into __write_node_folio to make the logic clearer, and ensures the fsync|dentry mark is cleared in FGGC. | |||||
| CVE-2026-46171 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: riscv: kvm: fix vector context allocation leak When the second kzalloc (host_context.vector.datap) fails in kvm_riscv_vcpu_alloc_vector_context, the first allocation (guest_context.vector.datap) is leaked. Free it before returning. | |||||
| CVE-2026-46168 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix scheduling with atomic in timestamp sockopt Using lock_sock_fast() (atomic context) around sock_set_timestamp() and sock_set_timestamping() is unsafe, as both helpers can sleep. Replace lock_sock_fast() with sleepable lock_sock()/release_sock() to avoid scheduling while atomic panic. | |||||
| CVE-2026-46167 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl Just like in a previous problem in this driver, usblp_ctrl_msg() will collapse the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. Ideally that short command should be detected and error out, but many printers are known to send "incorrect" responses back so we can't just do that. statusbuf is kmalloc(8) at probe time and never filled before the first LPGETSTATUS ioctl. usblp_read_status() requests 1 byte. If a malicious printer responds with zero bytes, *statusbuf is one byte of stale kmalloc heap, sign-extended into the local int status, which the LPGETSTATUS path then copy_to_user()s directly to the ioctl caller. Fix this all by just zapping out the memory buffer when allocated at probe time. If a later call does a short read, the data will be identical to what the device sent it the last time, so there is no "leak" of information happening. | |||||
| CVE-2026-46165 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released. | |||||
| CVE-2026-46163 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: b43legacy: enforce bounds check on firmware key index in RX path Same fix as b43: the firmware-controlled key index in b43legacy_rx() can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read of dev->key[]. Make the check enforcing by dropping the frame for invalid indices. | |||||
| CVE-2026-46162 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix double free in ice_sf_eth_activate() error path When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev). The device release callback ice_sf_dev_release() frees sf_dev, but the current error path falls through to sf_dev_free and calls kfree(sf_dev) again, causing a double free. Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but avoid falling through to sf_dev_free after auxiliary_device_uninit(). | |||||
| CVE-2026-46161 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix divide-by-zero in setup_geo() with zero far_copies setup_geo() extracts near_copies (nc) and far_copies (fc) from the user-provided layout parameter without checking for zero. When fc=0 with the "improved" far set layout selected, 'geo->far_set_size = disks / fc' triggers a divide-by-zero. Validate nc and fc immediately after extraction, returning -1 if either is zero. | |||||
| CVE-2026-46157 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger Currently the runtime.oss.trigger field may be accessed concurrently without protection, which may lead to the data race. And, in this case, it may lead to more severe problem because it's a bit field; as writing the data, it may overwrite other bit fields as well, which confuses the operation completely, as spotted by fuzzing. Fix it by covering runtime.oss.trigger bit fled also with the existing params_lock mutex in both snd_pcm_oss_get_trigger() and snd_pcm_oss_poll(). | |||||
| CVE-2026-46156 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang() The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and readl(crtc_reg) will access with random address, because the "device" is from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong when my platform inserts a discrete GPU: lspci -tv -[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller ... +-06.0 Loongson Technology LLC LG100 GPU +-06.2 Loongson Technology LLC Device 7a37 ... Add a default switch case to fix the panic as below: Kernel ade access[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4 pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0 a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002 a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001 t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000 t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0 t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8 s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000 s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000 ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210 ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1) BADV: 7fffffffffffff00 PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____)) Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007 0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff 900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08 0000000000000000 0000000000000000 0000000000000006 90000001002fb778 90000001000530b8 90000000027af000 0000000000000000 9000000100054000 9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001 90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000 0000000000000006 90000000027af000 0000000000000030 90000000027af000 900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560 7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030 ... Call Trace: [<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210 [<9000000000eebc08>] pci_fixup_device+0x108/0x280 [<9000000000ebb70c>] pci_setup_device+0x24c/0x690 [<9000000000ebc560>] pci_scan_single_device+0xe0/0x140 [<9000000000ebc684>] pci_scan_slot+0xc4/0x280 [<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0 [<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420 [<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440 [<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0 [<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<9000000000f5211c>] acpi_bus_scan+0x6c/0x280 [<900000000189c028>] acpi_scan_init+0x194/0x310 [<900000000189bc6c>] acpi_init+0xcc/0x140 [<9000000000220cdc>] do_one_initcall+0x4c/0x310 [<90000000018618fc>] kernel_init_freeable+0x258/0x2d4 [<900000000184326c>] kernel_init+0x28/0x13c [<9000000000222008>] ret_from_kernel_thread+0xc/0xa4 | |||||
| CVE-2026-46155 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in smb2_compound_op() If a server sends a truncated response but a large OutputBufferLength, and terminates the EA list early, check_wsl_eas() returns success without validating that the entire OutputBufferLength fits within iov_len. Then smb2_compound_op() does: memcpy(idata->wsl.eas, data[0], size[0]); Where size[0] is OutputBufferLength. If iov_len is smaller than size[0], memcpy can read beyond the end of the rsp_iov allocation and leak adjacent kernel heap memory. | |||||
| CVE-2026-46154 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters scx_group_set_{weight,idle,bandwidth}() cache scx_root before acquiring scx_cgroup_ops_rwsem, so the pointer can be stale by the time the op runs. If the loaded scheduler is disabled and freed (via RCU work) and another is enabled between the naked load and the rwsem acquire, the reader sees scx_cgroup_enabled=true (the new scheduler's) but dereferences the freed one - UAF on SCX_HAS_OP(sch, ...) / SCX_CALL_OP(sch, ...). scx_cgroup_enabled is toggled only under scx_cgroup_ops_rwsem write (scx_cgroup_{init,exit}), so reading scx_root inside the rwsem read section correlates @sch with the enabled snapshot. | |||||
| CVE-2026-46153 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: 8021q: delete cleared egress QoS mappings vlan_dev_set_egress_priority() currently keeps cleared egress priority mappings in the hash as tombstones. Repeated set/clear cycles with distinct skb priorities therefore accumulate mapping nodes until device teardown and leak memory. Delete mappings when vlan_prio is cleared instead of keeping tombstones. Now that the egress mapping lists are RCU protected, the node can be unlinked safely and freed after a grace period. | |||||