Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-31787 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: fix double free via VMA splitting privcmd_vm_ops defines .close (privcmd_close), but neither .may_split nor .open. When userspace does a partial munmap() on a privcmd mapping, the kernel splits the VMA via __split_vma(). Since may_split is NULL, the split is allowed. vm_area_dup() copies vm_private_data (a pages array allocated in alloc_empty_pages()) into the new VMA without any fixup, because there is no .open callback. Both VMAs now point to the same pages array. When the unmapped portion is closed, privcmd_close() calls: - xen_unmap_domain_gfn_range() - xen_free_unpopulated_pages() - kvfree(pages) The surviving VMA still holds the dangling pointer. When it is later destroyed, the same sequence runs again, which leads to a double free. Fix this issue by adding a .may_split callback denying the VMA split. This is XSA-487 / CVE-2026-31787 | |||||
| CVE-2026-31746 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix memory leak with CCA cards used as accelerator Tests showed that there is a memory leak if CCA cards are used as accelerator for clear key RSA requests (ME and CRT). With the last rework for the memory allocation the AP messages are allocated by ap_init_apmsg() but for some reason on two places (ME and CRT) the older allocation was still in place. So the first allocation simple was never freed. | |||||
| CVE-2026-31709 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the whole DACL before rewriting it in cifsacl build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated DACL that still contains a header, claims one or more ACEs, and then drive replace_sids_and_copy_aces() or set_chmod_dacl() past the validated extent while they compare or copy attacker-controlled ACEs. Factor the DACL structural checks into validate_dacl(), extend them to validate each ACE against the DACL bounds, and use the shared validator before the chmod/chown rebuild paths. parse_dacl() reuses the same validator so the read-side parser and write-side rewrite paths agree on what constitutes a well-formed incoming DACL. | |||||
| CVE-2026-31737 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix ring allocation unwind on open failure ftgmac100_alloc_rings() allocates rx_skbs, tx_skbs, rxdes, txdes, and rx_scratch in stages. On intermediate failures it returned -ENOMEM directly, leaking resources allocated earlier in the function. Rework the failure path to use staged local unwind labels and free allocated resources in reverse order before returning -ENOMEM. This matches common netdev allocation cleanup style. | |||||
| CVE-2026-43097 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: PCI: hv: Fix double ida_free in hv_pci_probe error path If hv_pci_probe() fails after storing the domain number in hbus->bridge->domain_nr, there is a call to free this domain_nr via pci_bus_release_emul_domain_nr(), however, during cleanup, the bridge release callback pci_release_host_bridge_dev() also frees the domain_nr causing ida_free to be called on same ID twice and triggering following warning: ida_free called for id=28971 which is not allocated. WARNING: lib/idr.c:594 at ida_free+0xdf/0x160, CPU#0: kworker/0:2/198 Call Trace: pci_bus_release_emul_domain_nr+0x17/0x20 pci_release_host_bridge_dev+0x4b/0x60 device_release+0x3b/0xa0 kobject_put+0x8e/0x220 devm_pci_alloc_host_bridge_release+0xe/0x20 devres_release_all+0x9a/0xd0 device_unbind_cleanup+0x12/0xa0 really_probe+0x1c5/0x3f0 vmbus_add_channel_work+0x135/0x1a0 Fix this by letting pci core handle the free domain_nr and remove the explicit free called in pci-hyperv driver. | |||||
| CVE-2026-31771 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 8.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: move wake reason storage into validated event handlers hci_store_wake_reason() is called from hci_event_packet() immediately after stripping the HCI event header but before hci_event_func() enforces the per-event minimum payload length from hci_ev_table. This means a short HCI event frame can reach bacpy() before any bounds check runs. Rather than duplicating skb parsing and per-event length checks inside hci_store_wake_reason(), move wake-address storage into the individual event handlers after their existing event-length validation has succeeded. Convert hci_store_wake_reason() into a small helper that only stores an already-validated bdaddr while the caller holds hci_dev_lock(). Use the same helper after hci_event_func() with a NULL address to preserve the existing unexpected-wake fallback semantics when no validated event handler records a wake address. Annotate the helper with __must_hold(&hdev->lock) and add lockdep_assert_held(&hdev->lock) so future call paths keep the lock contract explicit. Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(), hci_sync_conn_complete_evt(), le_conn_complete_evt(), hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(), hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and hci_le_past_received_evt(). | |||||
| CVE-2026-43101 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data() We need to check __in6_dev_get() for possible NULL value, as suggested by Yiming Qian. Also add skb_dst_dev_rcu() instead of skb_dst_dev(), and two missing READ_ONCE(). Note that @dev can't be NULL. | |||||
| CVE-2026-43073 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86-64: rename misleadingly named '__copy_user_nocache()' function This function was a masterclass in bad naming, for various historical reasons. It claimed to be a non-cached user copy. It is literally _neither_ of those things. It's a specialty memory copy routine that uses non-temporal stores for the destination (but not the source), and that does exception handling for both source and destination accesses. Also note that while it works for unaligned targets, any unaligned parts (whether at beginning or end) will not use non-temporal stores, since only words and quadwords can be non-temporal on x86. The exception handling means that it _can_ be used for user space accesses, but not on its own - it needs all the normal "start user space access" logic around it. But typically the user space access would be the source, not the non-temporal destination. That was the original intention of this, where the destination was some fragile persistent memory target that needed non-temporal stores in order to catch machine check exceptions synchronously and deal with them gracefully. Thus that non-descriptive name: one use case was to copy from user space into a non-cached kernel buffer. However, the existing users are a mix of that intended use-case, and a couple of random drivers that just did this as a performance tweak. Some of those random drivers then actively misused the user copying version (with STAC/CLAC and all) to do kernel copies without ever even caring about the exception handling, _just_ for the non-temporal destination. Rename it as a first small step to actually make it halfway sane, and change the prototype to be more normal: it doesn't take a user pointer unless the caller has done the proper conversion, and the argument size is the full size_t (it still won't actually copy more than 4GB in one go, but there's also no reason to silently truncate the size argument in the caller). Finally, use this now sanely named function in the NTB code, which mis-used a user copy version (with STAC/CLAC and all) of this interface despite it not actually being a user copy at all. | |||||
| CVE-2026-31703 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: writeback: Fix use after free in inode_switch_wbs_work_fn() inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... } Now adding of items to the list looks like: wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work); Because inode_switch_wbs_work_fn() loops when processing isw items, it can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is empty. This is a problem because in that case wb can get freed (no isw items -> no wb reference) while the work is still pending causing use-after-free issues. We cannot just fix this by cancelling work when freeing wb because that could still trigger problematic 0 -> 1 transitions on wb refcount due to wb_get() in inode_switch_wbs_work_fn(). It could be all handled with more careful code but that seems unnecessarily complex so let's avoid that until it is proven that the looping actually brings practical benefit. Just remove the loop from inode_switch_wbs_work_fn() instead. That way when wb_queue_isw() queues work, we are guaranteed we have added the first item to wb->switch_wbs_ctxs and nobody is going to remove it (and drop the wb reference it holds) until the queued work runs. | |||||
| CVE-2026-31744 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix NULL pointer dereference when perf domain ID is not found dev_energymodel_nl_get_perf_domains_doit() calls em_perf_domain_get_by_id() but does not check the return value before passing it to __em_nl_get_pd_size(). When a caller supplies a non-existent perf domain ID, em_perf_domain_get_by_id() returns NULL, and __em_nl_get_pd_size() immediately dereferences pd->cpus (struct offset 0x30), causing a NULL pointer dereference. The sister handler dev_energymodel_nl_get_perf_table_doit() already handles this correctly via __em_nl_get_pd_table_id(), which returns NULL and causes the caller to return -EINVAL. Add the same NULL check in the get-perf-domains do handler. [ rjw: Subject and changelog edits ] | |||||
| CVE-2026-31778 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix stack out-of-bounds read in init_card The loop creates a whitespace-stripped copy of the card shortname where `len < sizeof(card->id)` is used for the bounds check. Since sizeof(card->id) is 16 and the local id buffer is also 16 bytes, writing 16 non-space characters fills the entire buffer, overwriting the terminating nullbyte. When this non-null-terminated string is later passed to snd_card_set_id() -> copy_valid_id_string(), the function scans forward with `while (*nid && ...)` and reads past the end of the stack buffer, reading the contents of the stack. A USB device with a product name containing many non-ASCII, non-space characters (e.g. multibyte UTF-8) will reliably trigger this as follows: BUG: KASAN: stack-out-of-bounds in copy_valid_id_string sound/core/init.c:696 [inline] BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c sound/core/init.c:718 The off-by-one has been present since commit bafeee5b1f8d ("ALSA: snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1), which first introduced this whitespace-stripping loop. The original code never accounted for the null terminator when bounding the copy. Fix this by changing the loop bound to `sizeof(card->id) - 1`, ensuring at least one byte remains as the null terminator. | |||||
| CVE-2026-43060 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies. | |||||
| CVE-2026-31756 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop() dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro, which expects hsotg->lock to be held since it does spin_unlock/spin_lock around the gadget driver callback invocation. However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating() without holding the lock. This leads to: - spin_unlock on a lock that is not held (undefined behavior) - The lock remaining held after dwc2_gadget_exit_clock_gating() returns, causing a deadlock when spin_lock_irqsave() is called later in the same function. Fix this by acquiring hsotg->lock before calling dwc2_gadget_exit_clock_gating() and releasing it afterwards, which satisfies the locking requirement of the call_gadget() macro. | |||||
| CVE-2026-43121 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_ref race between scrub and refill paths The io_zcrx_put_niov_uref() function uses a non-atomic check-then-decrement pattern (atomic_read followed by separate atomic_dec) to manipulate user_refs. This is serialized against other callers by rq_lock, but io_zcrx_scrub() modifies the same counter with atomic_xchg() WITHOUT holding rq_lock. On SMP systems, the following race exists: CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock) put_niov_uref: atomic_read(uref) - 1 // window opens atomic_xchg(uref, 0) - 1 return_niov_freelist(niov) [PUSH #1] // window closes atomic_dec(uref) - wraps to -1 returns true return_niov(niov) return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE] The same niov is pushed to the freelist twice, causing free_count to exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds write (a u32 value) past the kvmalloc'd freelist array into the adjacent slab object. Fix this by replacing the non-atomic read-then-dec in io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically tests and decrements user_refs. This makes the operation safe against concurrent atomic_xchg from scrub without requiring scrub to acquire rq_lock. [pavel: removed a warning and a comment] | |||||
| CVE-2026-43104 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix a memory leak in hang state error path When vc4_save_hang_state() encounters an early return condition, it returns without freeing the previously allocated `kernel_state`, leaking memory. Add the missing kfree() calls by consolidating the early return paths into a single place. | |||||
| CVE-2026-31779 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 8.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix potential out-of-bounds read in iwl_mvm_nd_match_info_handler() The memcpy function assumes the dynamic array notif->matches is at least as large as the number of bytes to copy. Otherwise, results->matches may contain unwanted data. To guarantee safety, extend the validation in one of the checks to ensure sufficient packet length. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2026-43125 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: dlm: validate length in dlm_search_rsb_tree The len parameter in dlm_dump_rsb_name() is not validated and comes from network messages. When it exceeds DLM_RESNAME_MAXLEN, it can cause out-of-bounds write in dlm_search_rsb_tree(). Add length validation to prevent potential buffer overflow. | |||||
| CVE-2026-31739 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - Add missing CRYPTO_ALG_ASYNC The tegra crypto driver failed to set the CRYPTO_ALG_ASYNC on its asynchronous algorithms, causing the crypto API to select them for users that request only synchronous algorithms. This causes crashes (at least). Fix this by adding the flag like what the other drivers do. Also remove the unnecessary CRYPTO_ALG_TYPE_* flags, since those just get ignored and overridden by the registration function anyway. | |||||
| CVE-2026-31715 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io() The xfstests case "generic/107" and syzbot have both reported a NULL pointer dereference. The concurrent scenario that triggers the panic is as follows: F2FS_WB_CP_DATA write callback umount - f2fs_write_checkpoint - f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA) - blk_mq_end_request - bio_endio - f2fs_write_end_io : dec_page_count(sbi, F2FS_WB_CP_DATA) : wake_up(&sbi->cp_wait) - kill_f2fs_super - kill_block_super - f2fs_put_super : iput(sbi->node_inode) : sbi->node_inode = NULL : f2fs_in_warm_node_list - is_node_folio // sbi->node_inode is NULL and panic The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is decremented to zero. As a result, f2fs_in_warm_node_list() may dereference a NULL node_inode when checking whether a folio belongs to the node inode, leading to a panic. This patch fixes the issue by calling f2fs_in_warm_node_list() before decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the use-after-free condition. | |||||
| CVE-2026-43128 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix double dma_buf_unpin in failure path In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf is immediately unpinned but the umem_dmabuf->pinned flag is still set. Then, when ib_umem_release() is called, it calls ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again. Fix this by removing the immediate unpin upon failure and just let the ib_umem_release/revoke path handle it. This also ensures the proper unmap-unpin unwind ordering if the dmabuf_map_pages call happened to fail due to dma_resv_wait_timeout (and therefore has a non-NULL umem_dmabuf->sgt). | |||||