Filtered by vendor Linux
Subscribe
Total
19344 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-39764 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: remove refcounting in expectation dumpers Same pattern as previous patch: do not keep the expectation object alive via refcount, only store a cookie value and then use that as the skip hint for dump resumption. AFAICS this has the same issue as the one resolved in the conntrack dumper, when we do if (!refcount_inc_not_zero(&exp->use)) to increment the refcount, there is a chance that exp == last, which causes a double-increment of the refcount and subsequent memory leak. | |||||
| CVE-2025-39756 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs: Prevent file descriptor table allocations exceeding INT_MAX When sysctl_nr_open is set to a very high value (for example, 1073741816 as set by systemd), processes attempting to use file descriptors near the limit can trigger massive memory allocation attempts that exceed INT_MAX, resulting in a WARNING in mm/slub.c: WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288 This happens because kvmalloc_array() and kvmalloc() check if the requested size exceeds INT_MAX and emit a warning when the allocation is not flagged with __GFP_NOWARN. Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a process calls dup2(oldfd, 1073741880), the kernel attempts to allocate: - File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes - Multiple bitmaps: ~400MB - Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647) Reproducer: 1. Set /proc/sys/fs/nr_open to 1073741816: # echo 1073741816 > /proc/sys/fs/nr_open 2. Run a program that uses a high file descriptor: #include <unistd.h> #include <sys/resource.h> int main() { struct rlimit rlim = {1073741824, 1073741824}; setrlimit(RLIMIT_NOFILE, &rlim); dup2(2, 1073741880); // Triggers the warning return 0; } 3. Observe WARNING in dmesg at mm/slub.c:5027 systemd commit a8b627a introduced automatic bumping of fs.nr_open to the maximum possible value. The rationale was that systems with memory control groups (memcg) no longer need separate file descriptor limits since memory is properly accounted. However, this change overlooked that: 1. The kernel's allocation functions still enforce INT_MAX as a maximum size regardless of memcg accounting 2. Programs and tests that legitimately test file descriptor limits can inadvertently trigger massive allocations 3. The resulting allocations (>8GB) are impractical and will always fail systemd's algorithm starts with INT_MAX and keeps halving the value until the kernel accepts it. On most systems, this results in nr_open being set to 1073741816 (0x3ffffff8), which is just under 1GB of file descriptors. While processes rarely use file descriptors near this limit in normal operation, certain selftests (like tools/testing/selftests/core/unshare_test.c) and programs that test file descriptor limits can trigger this issue. Fix this by adding a check in alloc_fdtable() to ensure the requested allocation size does not exceed INT_MAX. This causes the operation to fail with -EMFILE instead of triggering a kernel warning and avoids the impractical >8GB memory allocation request. | |||||
| CVE-2025-39748 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Forget ranges when refining tnum after JSET Syzbot reported a kernel warning due to a range invariant violation on the following BPF program. 0: call bpf_get_netns_cookie 1: if r0 == 0 goto <exit> 2: if r0 & Oxffffffff goto <exit> The issue is on the path where we fall through both jumps. That path is unreachable at runtime: after insn 1, we know r0 != 0, but with the sign extension on the jset, we would only fallthrough insn 2 if r0 == 0. Unfortunately, is_branch_taken() isn't currently able to figure this out, so the verifier walks all branches. The verifier then refines the register bounds using the second condition and we end up with inconsistent bounds on this unreachable path: 1: if r0 == 0 goto <exit> r0: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0xffffffffffffffff) 2: if r0 & 0xffffffff goto <exit> r0 before reg_bounds_sync: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0) r0 after reg_bounds_sync: u64=[0x1, 0] var_off=(0, 0) Improving the range refinement for JSET to cover all cases is tricky. We also don't expect many users to rely on JSET given LLVM doesn't generate those instructions. So instead of improving the range refinement for JSETs, Eduard suggested we forget the ranges whenever we're narrowing tnums after a JSET. This patch implements that approach. | |||||
| CVE-2025-39721 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - flush misc workqueue during device shutdown Repeated loading and unloading of a device specific QAT driver, for example qat_4xxx, in a tight loop can lead to a crash due to a use-after-free scenario. This occurs when a power management (PM) interrupt triggers just before the device-specific driver (e.g., qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains loaded. Since the driver uses a shared workqueue (`qat_misc_wq`) across all devices and owned by intel_qat.ko, a deferred routine from the device-specific driver may still be pending in the queue. If this routine executes after the driver is unloaded, it can dereference freed memory, resulting in a page fault and kernel crash like the following: BUG: unable to handle page fault for address: ffa000002e50a01c #PF: supervisor read access in kernel mode RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat] Call Trace: pm_bh_handler+0x1d2/0x250 [intel_qat] process_one_work+0x171/0x340 worker_thread+0x277/0x3a0 kthread+0xf0/0x120 ret_from_fork+0x2d/0x50 To prevent this, flush the misc workqueue during device shutdown to ensure that all pending work items are completed before the driver is unloaded. Note: This approach may slightly increase shutdown latency if the workqueue contains jobs from other devices, but it ensures correctness and stability. | |||||
| CVE-2025-39681 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper Since 923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot") resctrl_cpu_detect() has been moved from common CPU initialization code to the vendor-specific BSP init helper, while Hygon didn't put that call in their code. This triggers a division by zero fault during early booting stage on our machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale. Add the missing resctrl_cpu_detect() in the Hygon BSP init helper. [ bp: Massage commit message. ] | |||||
| CVE-2025-38736 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization Syzbot reported shift-out-of-bounds exception on MDIO bus initialization. The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations. Fix this by masking the PHY address with 0x1f (31 decimal) to ensure it stays within the valid range. | |||||
| CVE-2025-38732 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_reject: don't leak dst refcount for loopback packets recent patches to add a WARN() when replacing skb dst entry found an old bug: WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline] WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline] WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234 [..] Call Trace: nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325 nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27 expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline] .. This is because blamed commit forgot about loopback packets. Such packets already have a dst_entry attached, even at PRE_ROUTING stage. Instead of checking hook just check if the skb already has a route attached to it. | |||||
| CVE-2025-38727 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netlink: avoid infinite retry looping in netlink_unicast() netlink_attachskb() checks for the socket's read memory allocation constraints. Firstly, it has: rmem < READ_ONCE(sk->sk_rcvbuf) to check if the just increased rmem value fits into the socket's receive buffer. If not, it proceeds and tries to wait for the memory under: rmem + skb->truesize > READ_ONCE(sk->sk_rcvbuf) The checks don't cover the case when skb->truesize + sk->sk_rmem_alloc is equal to sk->sk_rcvbuf. Thus the function neither successfully accepts these conditions, nor manages to reschedule the task - and is called in retry loop for indefinite time which is caught as: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 0-....: (25999 ticks this GP) idle=ef2/1/0x4000000000000000 softirq=262269/262269 fqs=6212 (t=26000 jiffies g=230833 q=259957) NMI backtrace for cpu 0 CPU: 0 PID: 22 Comm: kauditd Not tainted 5.10.240 #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc42 04/01/2014 Call Trace: <IRQ> dump_stack lib/dump_stack.c:120 nmi_cpu_backtrace.cold lib/nmi_backtrace.c:105 nmi_trigger_cpumask_backtrace lib/nmi_backtrace.c:62 rcu_dump_cpu_stacks kernel/rcu/tree_stall.h:335 rcu_sched_clock_irq.cold kernel/rcu/tree.c:2590 update_process_times kernel/time/timer.c:1953 tick_sched_handle kernel/time/tick-sched.c:227 tick_sched_timer kernel/time/tick-sched.c:1399 __hrtimer_run_queues kernel/time/hrtimer.c:1652 hrtimer_interrupt kernel/time/hrtimer.c:1717 __sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1113 asm_call_irq_on_stack arch/x86/entry/entry_64.S:808 </IRQ> netlink_attachskb net/netlink/af_netlink.c:1234 netlink_unicast net/netlink/af_netlink.c:1349 kauditd_send_queue kernel/audit.c:776 kauditd_thread kernel/audit.c:897 kthread kernel/kthread.c:328 ret_from_fork arch/x86/entry/entry_64.S:304 Restore the original behavior of the check which commit in Fixes accidentally missed when restructuring the code. Found by Linux Verification Center (linuxtesting.org). | |||||
| CVE-2025-38725 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: add phy_mask for ax88772 mdio bus Without setting phy_mask for ax88772 mdio bus, current driver may create at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f. DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy device will bind to net phy driver. This is creating issue during system suspend/resume since phy_polling_mode() in phy_state_machine() will directly deference member of phydev->drv for non-main phy devices. Then NULL pointer dereference issue will occur. Due to only external phy or internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud the issue. | |||||
| CVE-2025-38721 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix refcount leak on table dump There is a reference count leak in ctnetlink_dump_table(): if (res < 0) { nf_conntrack_get(&ct->ct_general); // HERE cb->args[1] = (unsigned long)ct; ... While its very unlikely, its possible that ct == last. If this happens, then the refcount of ct was already incremented. This 2nd increment is never undone. This prevents the conntrack object from being released, which in turn keeps prevents cnet->count from dropping back to 0. This will then block the netns dismantle (or conntrack rmmod) as nf_conntrack_cleanup_net_list() will wait forever. This can be reproduced by running conntrack_resize.sh selftest in a loop. It takes ~20 minutes for me on a preemptible kernel on average before I see a runaway kworker spinning in nf_conntrack_cleanup_net_list. One fix would to change this to: if (res < 0) { if (ct != last) nf_conntrack_get(&ct->ct_general); But this reference counting isn't needed in the first place. We can just store a cookie value instead. A followup patch will do the same for ctnetlink_exp_dump_table, it looks to me as if this has the same problem and like ctnetlink_dump_table, we only need a 'skip hint', not the actual object so we can apply the same cookie strategy there as well. | |||||
| CVE-2025-38704 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix possible invalid rdp's->nocb_cb_kthread pointer access In the preparation stage of CPU online, if the corresponding the rdp's->nocb_cb_kthread does not exist, will be created, there is a situation where the rdp's rcuop kthreads creation fails, and then de-offload this CPU's rdp, does not assign this CPU's rdp->nocb_cb_kthread pointer, but this rdp's->nocb_gp_rdp and rdp's->rdp_gp->nocb_gp_kthread is still valid. This will cause the subsequent re-offload operation of this offline CPU, which will pass the conditional check and the kthread_unpark() will access invalid rdp's->nocb_cb_kthread pointer. This commit therefore use rdp's->nocb_gp_kthread instead of rdp_gp's->nocb_gp_kthread for safety check. | |||||
| CVE-2025-38681 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: take the memory hotplug lock inside ptdump_walk_pgd() Memory hot remove unmaps and tears down various kernel page table regions as required. The ptdump code can race with concurrent modifications of the kernel page tables. When leaf entries are modified concurrently, the dump code may log stale or inconsistent information for a VA range, but this is otherwise not harmful. But when intermediate levels of kernel page table are freed, the dump code will continue to use memory that has been freed and potentially reallocated for another purpose. In such cases, the ptdump code may dereference bogus addresses, leading to a number of potential problems. To avoid the above mentioned race condition, platforms such as arm64, riscv and s390 take memory hotplug lock, while dumping kernel page table via the sysfs interface /sys/kernel/debug/kernel_page_tables. Similar race condition exists while checking for pages that might have been marked W+X via /sys/kernel/debug/kernel_page_tables/check_wx_pages which in turn calls ptdump_check_wx(). Instead of solving this race condition again, let's just move the memory hotplug lock inside generic ptdump_check_wx() which will benefit both the scenarios. Drop get_online_mems() and put_online_mems() combination from all existing platform ptdump code paths. | |||||
| CVE-2025-38322 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Fix crash in icl_update_topdown_event() The perf_fuzzer found a hard-lockup crash on a RaptorLake machine: Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000 CPU: 23 UID: 0 PID: 0 Comm: swapper/23 Tainted: [W]=WARN Hardware name: Dell Inc. Precision 9660/0VJ762 RIP: 0010:native_read_pmc+0x7/0x40 Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ... RSP: 000:fffb03100273de8 EFLAGS: 00010046 .... Call Trace: <TASK> icl_update_topdown_event+0x165/0x190 ? ktime_get+0x38/0xd0 intel_pmu_read_event+0xf9/0x210 __perf_event_read+0xf9/0x210 CPUs 16-23 are E-core CPUs that don't support the perf metrics feature. The icl_update_topdown_event() should not be invoked on these CPUs. It's a regression of commit: f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read") The bug introduced by that commit is that the is_topdown_event() function is mistakenly used to replace the is_topdown_count() call to check if the topdown functions for the perf metrics feature should be invoked. Fix it. | |||||
| CVE-2025-38201 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when resizing hashtable because __GFP_NOWARN is unset. Similar to: b541ba7d1f5a ("netfilter: conntrack: clamp maximum hashtable size to INT_MAX") | |||||
| CVE-2025-38125 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: make sure that ptp_rate is not 0 before configuring EST If the ptp_rate recorded earlier in the driver happens to be 0, this bogus value will propagate up to EST configuration, where it will trigger a division by 0. Prevent this division by 0 by adding the corresponding check and error code. | |||||
| CVE-2025-37980 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: block: fix resource leak in blk_register_queue() error path When registering a queue fails after blk_mq_sysfs_register() is successful but the function later encounters an error, we need to clean up the blk_mq_sysfs resources. Add the missing blk_mq_sysfs_unregister() call in the error path to properly clean up these resources and prevent a memory leak. | |||||
| CVE-2025-37972 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Input: mtk-pmic-keys - fix possible null pointer dereference In mtk_pmic_keys_probe, the regs parameter is only set if the button is parsed in the device tree. However, on hardware where the button is left floating, that node will most likely be removed not to enable that input. In that case the code will try to dereference a null pointer. Let's use the regs struct instead as it is defined for all supported platforms. Note that it is ok setting the key reg even if that latter is disabled as the interrupt won't be enabled anyway. | |||||
| CVE-2025-37945 | 1 Linux | 1 Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY DSA has 2 kinds of drivers: 1. Those who call dsa_switch_suspend() and dsa_switch_resume() from their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz 2. Those who don't: all others. The above methods should be optional. For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(), and dsa_switch_resume() calls dsa_user_resume() -> phylink_start(). These seem good candidates for setting mac_managed_pm = true because that is essentially its definition [1], but that does not seem to be the biggest problem for now, and is not what this change focuses on. Talking strictly about the 2nd category of DSA drivers here (which do not have MAC managed PM, meaning that for their attached PHYs, mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full), I have noticed that the following warning from mdio_bus_phy_resume() is triggered: WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && phydev->state != PHY_UP); because the PHY state machine is running. It's running as a result of a previous dsa_user_open() -> ... -> phylink_start() -> phy_start() having been initiated by the user. The previous mdio_bus_phy_suspend() was supposed to have called phy_stop_machine(), but it didn't. So this is why the PHY is in state PHY_NOLINK by the time mdio_bus_phy_resume() runs. mdio_bus_phy_suspend() did not call phy_stop_machine() because for phylink, the phydev->adjust_link function pointer is NULL. This seems a technicality introduced by commit fddd91016d16 ("phylib: fix PAL state machine restart on resume"). That commit was written before phylink existed, and was intended to avoid crashing with consumer drivers which don't use the PHY state machine - phylink always does, when using a PHY. But phylink itself has historically not been developed with suspend/resume in mind, and apparently not tested too much in that scenario, allowing this bug to exist unnoticed for so long. Plus, prior to the WARN_ON(), it would have likely been invisible. This issue is not in fact restricted to type 2 DSA drivers (according to the above ad-hoc classification), but can be extrapolated to any MAC driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where the issue was reported. Assuming mac_managed_pm is set correctly, a quick search indicates the following other drivers might be affected: $ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm drivers/net/ethernet/atheros/ag71xx.c drivers/net/ethernet/microchip/sparx5/sparx5_main.c drivers/net/ethernet/microchip/lan966x/lan966x_main.c drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/freescale/ucc_geth.c drivers/net/ethernet/freescale/enetc/enetc_pf_common.c drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c drivers/net/ethernet/marvell/mvneta.c drivers/net/ethernet/marvell/prestera/prestera_main.c drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/altera/altera_tse_main.c drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c drivers/net/ethernet/meta/fbnic/fbnic_phylink.c drivers/net/ethernet/tehuti/tn40_phy.c drivers/net/ethernet/mscc/ocelot_net.c Make the existing conditions dependent on the PHY device having a phydev->phy_link_change() implementation equal to the default phy_link_change() provided by phylib. Otherwise, we implicitly know that the phydev has the phylink-provided phylink_phy_change() callback, and when phylink is used, the PHY state machine always needs to be stopped/ started on the suspend/resume path. The code is structured as such that if phydev->phy_link_change() is absent, it is a matter of time until the kernel will crash - no need to further complicate the test. Thus, for the situation where the PM is not managed b ---truncated--- | |||||
| CVE-2025-37909 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Fix memleak issue when GSO enabled Always map the `skb` to the LS descriptor. Previously skb was mapped to EXT descriptor when the number of fragments is zero with GSO enabled. Mapping the skb to EXT descriptor prevents it from being freed, leading to a memory leak | |||||
| CVE-2025-23143 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod. When I ran the repro [0] and waited a few seconds, I observed two LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1] Reproduction Steps: 1) Mount CIFS 2) Add an iptables rule to drop incoming FIN packets for CIFS 3) Unmount CIFS 4) Unload the CIFS module 5) Remove the iptables rule At step 3), the CIFS module calls sock_release() for the underlying TCP socket, and it returns quickly. However, the socket remains in FIN_WAIT_1 because incoming FIN packets are dropped. At this point, the module's refcnt is 0 while the socket is still alive, so the following rmmod command succeeds. # ss -tan State Recv-Q Send-Q Local Address:Port Peer Address:Port FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445 # lsmod | grep cifs cifs 1159168 0 This highlights a discrepancy between the lifetime of the CIFS module and the underlying TCP socket. Even after CIFS calls sock_release() and it returns, the TCP socket does not die immediately in order to close the connection gracefully. While this is generally fine, it causes an issue with LOCKDEP because CIFS assigns a different lock class to the TCP socket's sk->sk_lock using sock_lock_init_class_and_name(). Once an incoming packet is processed for the socket or a timer fires, sk->sk_lock is acquired. Then, LOCKDEP checks the lock context in check_wait_context(), where hlock_class() is called to retrieve the lock class. However, since the module has already been unloaded, hlock_class() logs a warning and returns NULL, triggering the null-ptr-deref. If LOCKDEP is enabled, we must ensure that a module calling sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded while such a socket is still alive to prevent this issue. Let's hold the module reference in sock_lock_init_class_and_name() and release it when the socket is freed in sk_prot_free(). Note that sock_lock_init() clears sk->sk_owner for svc_create_socket() that calls sock_lock_init_class_and_name() for a listening socket, which clones a socket by sk_clone_lock() without GFP_ZERO. [0]: CIFS_SERVER="10.0.0.137" CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST" DEV="enp0s3" CRED="/root/WindowsCredential.txt" MNT=$(mktemp -d /tmp/XXXXXX) mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1 iptables -A INPUT -s ${CIFS_SERVER} -j DROP for i in $(seq 10); do umount ${MNT} rmmod cifs sleep 1 done rm -r ${MNT} iptables -D INPUT -s ${CIFS_SERVER} -j DROP [1]: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs] CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) ... Call Trace: <IRQ> __lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178) lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816) _raw_spin_lock_nested (kernel/locking/spinlock.c:379) tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350) ... BUG: kernel NULL pointer dereference, address: 00000000000000c4 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire (kernel/ ---truncated--- | |||||