Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53090 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix ld_{abs,ind} failure path analysis in subprogs Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types. The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed. This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side. | |||||
| CVE-2026-53088 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix off-by-one in bcmgenet_put_txcb The write_ptr points to the next open tx_cb. We want to return the tx_cb that gets rewinded, so we must rewind the pointer first then return the tx_cb that it points to. That way the txcb can be correctly cleaned up. | |||||
| CVE-2026-53086 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix racing timeout handler The bcmgenet_timeout handler tries to take down all tx queues when a single queue times out. This is over zealous and causes many race conditions with queues that are still chugging along. Instead lets only restart the timed out queue. | |||||
| CVE-2026-53085 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix mm lifecycle in open-coded task_vma iterator The open-coded task_vma iterator reads task->mm locklessly and acquires mmap_read_trylock() but never calls mmget(). If the task exits concurrently, the mm_struct can be freed as it is not SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free. Safely read task->mm with a trylock on alloc_lock and acquire an mm reference. Drop the reference via bpf_iter_mmput_async() in _destroy() and error paths. bpf_iter_mmput_async() is a local wrapper around mmput_async() with a fallback to mmput() on !CONFIG_MMU. Reject irqs-disabled contexts (including NMI) up front. Operations used by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async) take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from NMI or from a tracepoint that fires with those locks held could deadlock. A trylock on alloc_lock is used instead of the blocking task_lock() (get_task_mm) to avoid a deadlock when a softirq BPF program iterates a task that already holds its alloc_lock on the same CPU. | |||||
| CVE-2026-53081 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars When regsafe() compares two scalar registers that both carry BPF_ADD_CONST, check_scalar_ids() maps their full compound id (aka base | BPF_ADD_CONST flag) as one idmap entry. However, it never verifies that the underlying base ids, that is, with the flag stripped are consistent with existing idmap mappings. This allows construction of two verifier states where the old state has R3 = R2 + 10 (both sharing base id A) while the current state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap creates two independent entries: A->B (for R2) and A|flag->C|flag (for R3), without catching that A->C conflicts with A->B. State pruning then incorrectly succeeds. Fix this by additionally verifying base ID mapping consistency whenever BPF_ADD_CONST is set: after mapping the compound ids, also invoke check_ids() on the base IDs (flag bits stripped). This ensures that if A was already mapped to B from comparing the source register, any ADD_CONST derivative must also derive from B, not an unrelated C. | |||||
| CVE-2026-53078 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg, the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the destination register in the !fullsock / !locked_tcp_sock path. Both macros borrow a temporary register to check is_fullsock / is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with a request_sock), dst_reg should be zeroed but is not, leaving the stale ctx pointer: - SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer, leading to stack-out-of-bounds access in helpers like bpf_skc_to_tcp6_sock(). - SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the verifier believes is a SCALAR_VALUE, leaking a kernel pointer. Fix both macros by: - Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the added instruction. - Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register restore in the !fullsock path, placed after the restore because dst_reg == src_reg means we need src_reg intact to read ctx->temp. | |||||
| CVE-2026-53075 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ppp: require CAP_NET_ADMIN in target netns for unattached ioctls /dev/ppp open is currently authorized against file->f_cred->user_ns, while unattached administrative ioctls operate on current->nsproxy->net_ns. As a result, a local unprivileged user can create a new user namespace with CLONE_NEWUSER, gain CAP_NET_ADMIN only in that new user namespace, and still issue PPPIOCNEWUNIT, PPPIOCATTACH, or PPPIOCATTCHAN against an inherited network namespace. Require CAP_NET_ADMIN in the user namespace that owns the target network namespace before handling unattached PPP administrative ioctls. This preserves normal pppd operation in the network namespace it is actually privileged in, while rejecting the userns-only inherited-netns case. | |||||
| CVE-2026-53072 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm() assumes it is held, and if conn is deleted concurrently -> UAF. Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen, and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred listening socket code paths, hci_connect_cfm(conn) is called with hdev->lock held. Fix by holding the lock. | |||||
| CVE-2026-53071 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file acquires the lock first. A remote BLE device can send a crafted L2CAP ECRED reconfiguration response to corrupt the channel list while another thread is iterating it. Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(), and l2cap_chan_unlock() and l2cap_chan_put() after, matching the pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del(). | |||||
| CVE-2026-53069 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via xdp_master_redirect(). Full decoded trace: https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73 bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU counter that bonding only allocates in bond_open() when the mode is round-robin. If the bond device was never brought up, rr_tx_counter stays NULL. The XDP redirect path can still reach that code on a bond that was never opened: bpf_master_redirect_enabled_key is a global static key, so as soon as any bond device has native XDP attached, the XDP_TX -> xdp_master_redirect() interception is enabled for every slave system-wide. The path xdp_master_redirect() -> bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() -> bond_rr_gen_slave_id() then runs against a bond that has no rr_tx_counter and crashes. Fix this in the generic xdp_master_redirect() by refusing to call into the master's ->ndo_xdp_get_xmit_slave() when the master device is not up. IFF_UP is only set after ->ndo_open() has successfully returned, so this reliably excludes masters whose XDP state has not been fully initialized. Drop the frame with XDP_ABORTED so the exception is visible via trace_xdp_exception() rather than silently falling through. This is not specific to bonding: any current or future master that defers XDP state allocation to ->ndo_open() is protected. | |||||
| CVE-2026-53062 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: fix missing locks in invalidating cache blocks In passthrough mode, the policy invalidate_mapping operation is called simultaneously from multiple workers, thus it should be protected by a lock. Otherwise, we might end up with data races on the allocated blocks counter, or even use-after-free issues with internal data structures when doing concurrent writes. Note that the existing FIXME in smq_invalidate_mapping() doesn't affect passthrough mode since migration tasks don't exist there, but would need attention if supporting fast device shrinking via suspend/resume without target reloading. Reproduce steps: 1. Create a cache device consisting of 1024 cache entries dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Populate the cache, and record the number of cached blocks fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \ --size=64m --direct=1 nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}') 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the passthrough cache. By setting multiple jobs with I/O size equal to the cache block size, cache blocks are invalidated concurrently from different workers. fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \ --direct=1 --numjobs=2 --randrepeat=0 --size=64m 5. Check if demoted matches cached block count. These numbers should match but may differ due to the data race. nr_demoted=$(dmsetup status cache | awk '{print $12}') echo "$nr_cached, $nr_demoted" | |||||
| CVE-2026-53049 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush(). | |||||
| CVE-2026-53033 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair) sock_hold(sk_pair) // UaF More practically, this fix guarantees that the iterator program is consistently provided with a unix socket that remains stable during iterator execution. [1]: BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490 Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231 Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2026-53031 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Validate node_id in arena_alloc_pages() arena_alloc_pages() accepts a plain int node_id and forwards it through the entire allocation chain without any bounds checking. Validate node_id before passing it down the allocation chain in arena_alloc_pages(). | |||||
| CVE-2026-53011 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix use-after-free in advance_sched() on schedule switch In advance_sched(), when should_change_schedules() returns true, switch_schedules() is called to promote the admin schedule to oper. switch_schedules() queues the old oper schedule for RCU freeing via call_rcu(), but 'next' still points into an entry of the old oper schedule. The subsequent 'next->end_time = end_time' and rcu_assign_pointer(q->current_entry, next) are use-after-free. Fix this by selecting 'next' from the new oper schedule immediately after switch_schedules(), and using its pre-calculated end_time. setup_first_end_time() sets the first entry's end_time to base_time + interval when the schedule is installed, so the value is already correct. The deleted 'end_time = sched_base_time(admin)' assignment was also harmful independently: it would overwrite the new first entry's pre-calculated end_time with just base_time. | |||||
| CVE-2026-53005 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Drop all SCM attributes for SOCKMAP. SOCKMAP can hide inflight fd from AF_UNIX GC. When a socket in SOCKMAP receives skb with inflight fd, sk_psock_verdict_data_ready() looks up the mapped socket and enqueue skb to its psock->ingress_skb. Since neither the old nor the new GC can inspect the psock queue, the hidden skb leaks the inflight sockets. Note that this cannot be detected via kmemleak because inflight sockets are linked to a global list. In addition, SOCKMAP redirect breaks the Tarjan-based GC's assumption that unix_edge.successor is always alive, which is no longer true once skb is redirected, resulting in use-after-free below. [0] Moreover, SOCKMAP does not call scm_stat_del() properly, so unix_show_fdinfo() could report an incorrect fd count. sk_msg_recvmsg() does not support any SCM attributes in the first place. Let's drop all SCM attributes before passing skb to the SOCKMAP layer. [0]: BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) Read of size 8 at addr ffff888125362670 by task kworker/56:1/496 CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events sk_psock_backlog Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379) kasan_report (mm/kasan/report.c:597) unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) unix_destroy_fpl (net/unix/garbage.c:317) unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976) sk_psock_backlog (./include/linux/skbuff.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) </TASK> Allocated by task 955: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) __kasan_slab_alloc (mm/kasan/common.c:369) kmem_cache_alloc_noprof (mm/slub.c:4539) sk_prot_alloc (net/core/sock.c:2240) sk_alloc (net/core/sock.c:2301) unix_create1 (net/unix/af_unix.c:1099) unix_create (net/unix/af_unix.c:1169) __sock_create (net/socket.c:1606) __sys_socketpair (net/socket.c:1811) __x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860) do_syscall_64 (arch/x86/entry/syscall_64.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 496: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kmem_cache_free (mm/slub.c:6165) __sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384) sk_psock_destroy (./include/net/sock.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) | |||||
| CVE-2026-53003 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: pppoe: drop PFC frames RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the current PPPoE driver assumes an uncompressed (2-byte) protocol field. However, the generic PPP layer function ppp_input() is not aware of the negotiation result, and still accepts PFC frames. If a peer with a broken implementation or an attacker sends a frame with a compressed (1-byte) protocol field, the subsequent PPP payload is shifted by one byte. This causes the network header to be 4-byte misaligned, which may trigger unaligned access exceptions on some architectures. To reduce the attack surface, drop PPPoE PFC frames. Introduce ppp_skb_is_compressed_proto() helper function to be used in both ppp_generic.c and pppoe.c to avoid open-coding. | |||||
| CVE-2026-52993 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix double-free in tipc_buf_append() tipc_msg_validate() can potentially reallocate the skb it is validating, freeing the old one. In tipc_buf_append(), it was being called with a pointer to a local variable which was a copy of the caller's skb pointer. If the skb was reallocated and validation subsequently failed, the error handling path would free the original skb pointer, which had already been freed, leading to double-free. Fix this by checking if head now points to a newly allocated reassembled skb. If it does, reassign *headbuf for later freeing operations. | |||||
| CVE-2026-52988 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase Publish new hooks in the list into the basechain/flowtable using splice_list_rcu() to ensure netlink dump list traversal via rcu is safe while concurrent ruleset update is going on. | |||||
| CVE-2026-52982 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: rtl8150: fix use-after-free in rtl8150_start_xmit() syzbot reported a KASAN slab-use-after-free read in rtl8150_start_xmit() when accessing skb->len for tx statistics after usb_submit_urb() has been called: BUG: KASAN: slab-use-after-free in rtl8150_start_xmit+0x71f/0x760 drivers/net/usb/rtl8150.c:712 Read of size 4 at addr ffff88810eb7a930 by task kworker/0:4/5226 The URB completion handler write_bulk_callback() frees the skb via dev_kfree_skb_irq(dev->tx_skb). The URB may complete on another CPU in softirq context before usb_submit_urb() returns in the submitter, so by the time the submitter reads skb->len the skb has already been queued to the per-CPU completion_queue and freed by net_tx_action(): CPU A (xmit) CPU B (USB completion softirq) ------------ ------------------------------ dev->tx_skb = skb; usb_submit_urb() --+ |-------> write_bulk_callback() | dev_kfree_skb_irq(dev->tx_skb) | net_tx_action() | napi_skb_cache_put() <-- free netdev->stats.tx_bytes | += skb->len; <-- UAF read Fix it by caching skb->len before submitting the URB and using the cached value when updating the tx_bytes counter. The pre-existing tx_bytes semantics are preserved: the counter tracks the original frame length (skb->len), not the ETH_ZLEN/USB-alignment padded "count" value that is handed to the device. Changing that would be a user-visible accounting change and is out of scope for this UAF fix. | |||||