Total
19303 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-64044 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: respect peer refcount in CMD_NEW_PEER error path ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly rather than ovpn_peer_put(), bypassing the kref. The accompanying comment ("peer was not yet hashed, thus it is not used in any context") holds for UDP but not for TCP. For UDP, the ovpn_socket union uses the .ovpn arm and never points back at a peer; UDP encap_recv looks up peers via the not-yet-populated hashtables, so the new peer is unreachable until ovpn_peer_add() publishes it. For TCP, ovpn_socket_new() sets ovpn_sock->peer and ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data(). From that moment until ovpn_socket_release() detaches in the error path, the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can reach the peer through sk_user_data -> ovpn_sock->peer and bump its refcount via ovpn_peer_hold(). ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release()) drains strparser and the tx work, but does not synchronize with userspace syscall callers that already hold a peer reference. If ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in __skb_recv_datagram() on peer->tcp.user_queue - the direct ovpn_peer_release() destroys the peer while the caller still holds the reference, and the eventual ovpn_peer_put() from that caller operates on freed memory. Replace the direct destructor call with ovpn_peer_put() so the kref correctly defers destruction until the last reference is dropped. In the common case where no concurrent user is present, behaviour is unchanged: the kref hits zero immediately and ovpn_peer_release_kref() runs the same destructor. With this conversion ovpn_peer_release() has no callers outside peer.c - ovpn_peer_release_kref() in the same translation unit is the only remaining user - so make it static and drop its declaration from peer.h. | |||||
| CVE-2026-64045 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 8.4 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: tcp - use cached peer pointer in ovpn_tcp_close() ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data() under rcu_read_lock(), takes a reference on sock->peer, caches the peer pointer in a local, and drops the read lock. It then passes sock->peer (rather than the cached local) to ovpn_peer_del(), re-dereferencing the ovpn_socket after the RCU read section has ended. Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use after unlock" pattern but is protected by lock_sock() held across the function, ovpn_tcp_close() runs without the socket lock: inet_release() invokes sk_prot->close() without taking lock_sock first. ovpn_socket_release() can therefore complete its kref_put -> detach -> synchronize_rcu -> kfree(sock) sequence concurrently, in the window after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences sock->peer. The synchronize_rcu() in ovpn_socket_release() protects readers that use the dereferenced pointer inside the RCU read section, not those that escape the pointer to a local and use it afterwards. A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp - don't deref NULL sk_socket member after tcp_close()"): trigger a peer removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same moment userspace closes the TCP fd. That commit fixed the detach-side of the same race window; this one fixes the close-side at a different victim. Tighten the entry block to read sock->peer exactly once into the cached peer local, and route all subsequent uses (the hold check, the ovpn_peer_del() call, and the prot->close() invocation) through that local. sock->peer is only ever written once in ovpn_socket_new() under lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket, and is never reassigned afterwards - but the previous multi-read pattern made that invariant implicit rather than explicit. The same multi-read shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(), ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned up via a dedicated helper in a follow-up net-next series. | |||||
| CVE-2026-64046 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective. | |||||
| CVE-2026-64047 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina). | |||||
| CVE-2026-64048 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt() populates V2 entries starting at index 1, so when no V1 device is selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] == NULL and ism_chid[0] == 0. smc_v2_determine_accepted_chid() then matches the peer's CHID against the array starting from index 0 using the CHID alone. A malicious peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches the empty slot, ini->ism_selected becomes 0, and the subsequent ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at offsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64 Require ism_dev[i] to be non-NULL before accepting a CHID match. | |||||
| CVE-2026-64049 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: fix userspace-triggered crash on a2xx-a4xx Before a5xx Adreno driver will not try fetching UBWC params (because those generations didn't support UBWC anyway), however it's still possible to query UBWC-related params from the userspace, triggering possible NULL pointer dereference. Check for UBWC config in adreno_get_param() and return sane defaults if there is none. Patchwork: https://patchwork.freedesktop.org/patch/717778/ | |||||
| CVE-2026-64050 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: don't mix devm and drmm functions Mixing devm and drmm functions will result in a use-after-free on msm driver teardown if userspace keeps a reference on the drm device: The WB connector data will be destroyed because of the use of devm_kzalloc()), while the usersoace still can try interacting with the WB connector (which uses drmm_ functions). Change dpu_writeback_init() to use drmm_. Patchwork: https://patchwork.freedesktop.org/patch/722656/ | |||||
| CVE-2026-64051 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Add overflow check to remap_pfn_range during mmap The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to (re)mapping beyond the VMA if the BO is too large. This can cause use after free issues when munmap() unmaps only the VMA region and not the additional mappings. To prevent this, check the remaining size of the VMA before remapping and truncate the remapped length if sg->length is too large. [jhugo: fix braces from checkpatch --strict] | |||||
| CVE-2026-64052 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user() pin_user_pages_fast() can partially succeed and return the number of pages that were actually pinned. However, the bio_integrity_map_user() does not handle this partial pinning. This leads to a general protection fault since bvec_from_pages() dereferences an unpinned page address, which is 0. To fix this, add a check to verify that all requested memory is pinned. If partial pinning occurs, unpin the memory and return -EFAULT. Kernel Oops: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6 | |||||
| CVE-2026-64053 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: block: don't overwrite bip_vcnt in bio_integrity_copy_user() bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h read past the bip_vec[] flex array. On READ the read is in bounds but lands on a saved user bvec instead of the bounce. The line was added for split propagation, but bio_integrity_clone() doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. | |||||
| CVE-2026-12878 | 3 Linux, Microsoft, Octopus | 3 Linux Kernel, Windows, Codefresh | 2026-09-02 | N/A | 8.8 HIGH |
| In affected versions of the Codefresh platform an authenticated user can utilize an API endpoint to elevate to Admin permissions. | |||||
| CVE-2026-47606 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-09-02 | N/A | 6.5 MEDIUM |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker could cause an absolute path traversal. A successful exploit might lead to code execution and information disclosure. | |||||
| CVE-2026-47627 | 2 Linux, Nvidia | 2 Linux Kernel, Triton Inference Server | 2026-09-02 | N/A | 9.8 CRITICAL |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where an attacker could cause path traversal. A successful exploit might lead to denial of service. | |||||
| CVE-2025-64649 | 2 Ibm, Linux | 2 Concert, Linux Kernel | 2026-09-02 | N/A | 5.9 MEDIUM |
| IBM Concert 1.0.0 through 2.3.1 could allow a remote attacker to perform unauthorized actions using man in the middle techniques due to improper certificate validation. | |||||
| CVE-2026-53242 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: PCM: Fix wait queue list corruption in snd_pcm_drain() on linked streams snd_pcm_drain() uses init_waitqueue_entry which does not clear entry.prev/next, and add_wait_queue with a conditional remove_wait_queue that is skipped when to_check is no longer in the group after concurrent UNLINK. The orphaned wait entry remains on the unlinked substream sleep queue. On the next drain iteration, add_wait_queue adds the entry to a new queue while still linked on the old one, corrupting both lists. A subsequent wake_up dereferences NULL at the func pointer (mapped from the spinlock at offset 0 of the misinterpreted wait_queue_head_t), causing a kernel panic. Replace init_waitqueue_entry/add_wait_queue/conditional remove_wait_queue with init_wait_entry/prepare_to_wait/ finish_wait. init_wait_entry clears prev/next via INIT_LIST_HEAD on each iteration and sets autoremove_wake_function which auto-removes the entry on wake-up. finish_wait safely handles both the already-removed and still-queued cases. | |||||
| CVE-2026-53153 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-09-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/list_lru: drain before clearing xarray entry on reparent memcg_reparent_list_lrus() clears the dying memcg's xarray entry with xas_store(&xas, NULL) before reparenting its per-node lists into the parent. This opens a window where a concurrent list_lru_del() arriving for the dying memcg sees xa_load() == NULL, walks to the parent in lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls list_del_init() on an item still physically linked on the dying memcg's list. If another in-flight thread holds the dying memcg's per-node lock at the same moment (another list_lru_del, or a list_lru_walk_one running an isolate callback), both threads modify ->next/->prev pointers on the same physical list under different locks. Adjacent items can corrupt each other's links. Fix it by reversing the order: reparent each per-node list and mark the child's list lru dead and then clear the xarray entry. Any concurrent list_lru op that finds the still-set xarray entry either takes the dying memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and walks to the parent, where the items now live. | |||||
| CVE-2026-53089 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free in offloaded map/prog info fill When querying info for an offloaded BPF map or program, bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns() obtain the network namespace with get_net(dev_net(offmap->netdev)). However, the associated netdev's netns may be racing with teardown during netns destruction. If the netns refcount has already reached 0, get_net() performs a refcount_t increment on 0, triggering: refcount_t: addition on 0; use-after-free. Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains valid, they cannot prevent the netns refcount from reaching zero. Fix this by using maybe_get_net() instead of get_net(). maybe_get_net() uses refcount_inc_not_zero() and returns NULL if the refcount is already zero, which causes ns_get_path_cb() to fail and the caller to return -ENOENT -- the correct behavior when the netns is being destroyed. | |||||
| CVE-2026-46331 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: fix pedit partial COW leading to page cache corruption tcf_pedit_act() computes the COW range for skb_ensure_writable() once before the key loop using tcfp_off_max_hint, but the hint does not account for the runtime header offset added by typed keys. This can leave part of the write region un-COW'd. Fix by moving skb_ensure_writable() inside the per-key loop where the actual write offset is known, and add overflow checking on the offset arithmetic. For negative offsets (e.g. Ethernet header edits at ingress), use skb_cow() to COW the headroom instead. Guard offset_valid() against INT_MIN, where negation is undefined. | |||||
| CVE-2026-46266 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP Yizhou Zhao reported that simply having one RAW socket on protocol IPPROTO_RAW (255) was dangerous. socket(AF_INET, SOCK_RAW, 255); A malicious incoming ICMP packet can set the protocol field to 255 and match this socket, leading to FNHE cache changes. inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST") pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner "man 7 raw" states: A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able to send any IP protocol that is specified in the passed header. Receiving of all IP protocols via IPPROTO_RAW is not possible using raw sockets. Make sure we drop these malicious packets. | |||||
| CVE-2026-45963 | 1 Linux | 1 Linux Kernel | 2026-09-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: nau8821: Cancel delayed work on component remove Attempting to unload the driver while a jack detection work is pending would likely crash the kernel when it is eventually scheduled for execution: [ 1984.896308] BUG: unable to handle page fault for address: ffffffffc10c2a20 [...] [ 1984.896388] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ 1984.896396] Workqueue: events nau8821_jdet_work [snd_soc_nau8821] [ 1984.896414] RIP: 0010:__mutex_lock+0x9f/0x11d0 [...] [ 1984.896504] Call Trace: [ 1984.896511] <TASK> [ 1984.896524] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896572] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896596] snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896622] nau8821_jdet_work+0xeb/0x1e0 [snd_soc_nau8821] [ 1984.896636] process_one_work+0x211/0x590 [ 1984.896649] ? srso_return_thunk+0x5/0x5f [ 1984.896670] worker_thread+0x1cd/0x3a0 Cancel unscheduled jdet_work or wait for its execution to finish before the component driver gets removed. | |||||