Total
395568 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-43719 | 1 Apple | 1 Macos | 2026-09-17 | N/A | 6.5 MEDIUM |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. Mounting a maliciously crafted SMB network share may lead to system termination. | |||||
| CVE-2024-5042 | 2026-09-17 | N/A | 6.6 MEDIUM | ||
| A flaw was found in the Submariner project. Due to unnecessary role-based access control permissions, a privileged attacker can run a malicious container on a node that may allow them to steal service account tokens and further compromise other nodes and potentially the entire cluster. | |||||
| CVE-2026-90045 | 2026-09-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: ffs: fix mm lifetime handling io_data stores a pointer to the submitting task's mm_struct, but does not currently hold a reference to it while async requests are pending. This can result in a use-after-free if the task exits before completion handling finishes. Take a reference with mmgrab() when queuing the read request and release it with mmdrop() on request completion. | |||||
| CVE-2026-90034 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: change kmalloc() to kzalloc() Change the kmalloc() calls in usb_mdc800_init() for irq_urb_buffer and download_urb_buffer to kzalloc(), avoiding potential stack leaks if a shorter message is received in mdc800_usb_irq() and mdc800_usb_download_notify() | |||||
| CVE-2026-90031 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: usb-storage: ene_ub6250: fix race between scan work and probe ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage infrastructure and schedules the delayed scan work. The driver then calls ene_get_card_type(), which sends an ENE command through ene_send_scsi_cmd() and the usb-storage bulk transfer helpers. Both the delayed scan work, through usb_stor_Bulk_max_lun(), and ene_get_card_type() use us->current_urb. The scan work serializes this access with us->dev_mutex, but the ENE card-type probe does not. If the scan work runs while ene_get_card_type() is still using us->current_urb, usb_submit_urb() warns that the URB is already active. Serialize ene_get_card_type() with us->dev_mutex, matching the locking used by the scan path. | |||||
| CVE-2026-90022 | 2026-09-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi2: fix use-after-free in string attribute show path f_midi2_opts_str_show() takes the string lock internally, but its callers dereference the opts->info.<field> pointer before calling it, outside the lock. This races with f_midi2_opts_str_store(), which frees the old string under opts->lock when the attribute is written concurrently, the show path can read a pointer that gets freed before the lock inside str_show() is even taken. Change f_midi2_opts_str_show() to take a pointer to the string field, matching the existing pattern in f_midi2_opts_str_store(), and dereference it only after the lock is held. Update all three callers (iface_name, block name, and the EP string option macro) accordingly. | |||||
| CVE-2026-90020 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl() gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but dev->state is checked after acquiring the lock. Therefore a concurrent bind can change the device state between these operations, which can leave ioctl with a stale NULL gadget pointer and causing a NULL pointer dereference at gadget->ops->ioctl. Read dev->gadget while holding dev->lock so that the gadget pointer and device state are sampled consistently. | |||||
| CVE-2026-89998 | 2026-09-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: dm: fix race when loading and unloading a table If the userspace calls two concurrent table load ioctls and one of them succeeds and the other fails, there is a race condition because dm_setup_md_queue walks &md->table_devices without any lock. If the walk races with dm_table_destroy -> free_devices -> dm_put_table_device, there is access to invalid memory. Fix this race by extending the lock over the list walk. | |||||
| CVE-2026-89997 | 2026-09-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: dm: fix resume-vs-remove race If the user issues the resume ioctl and the remove ioctl at the same time, it may be possible that the device is resumed after it is suspended in __dm_destroy. The result is that the table is destroyed without calling the postsuspend method. Dm targets expect that they may be removed only after the postsuspend method method was called. If we break this expectation, it can cause misbehavior in various targets. For example - in the dm-integrity target, the reboot notifier is not unregistered, leading to use-after-free. Fix this bug by refusing to resume if the device is being destroyed. | |||||
| CVE-2026-89979 | 2026-09-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix race between non-atomic ops and trigger-start We protect the races of the concurrent state transitions between atomic PCM ops, but the checks between the non-atomic ops (hw_params, hw_free and prepare) and the atomic ops aren't perfect; there is a check of the conflicting PCM state at the beginning of hw_params & co, but the atomic PCM ops can be still issued during the non-atomic PCM operations. An example such scenario is that a thread A re-issues the PREPARE or HW_PARAMS for the already prepared stream, while another thread B triggers the PCM start in the middle of the prepare operation. Although this usually doesn't lead to much serious issues, it can give some inconsistency as reported by syzkaller (such as ODEBUG warning). There are various atomic PCM ops, and basically the only problem is the PCM start as it operates from the PREPARED state. Other trigger commands (stop, etc) are for the running or the other special state, hence they are filtered as pre-condition. This patch is for preventing the PCM trigger-start during the non- atomic operations in order to address the problems above. Fortunately, the hw_params, hw_free and prepare operations call snd_pcm_buffer_access_lock(), and this can be used for checking the concurrent operations at the PCM trigger -- which sets the runtime->buffer_accessing to a negative (if possible), so the PCM trigger just needs to check the runtime->buffer_accessing value; if it's negative, it means the concurrent non-atomic PCM ops is running. | |||||
| CVE-2026-89964 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: parisc: eisa: Fix infinite loop when parsing invalid IRQ value When an invalid value is passed via the "eisa_irq_edge=" kernel command line parameter (e.g. "eisa_irq_edge=16,5"), eisa_irq_setup() prints an error message and continues without advancing the current position. As a result the same invalid value is parsed again and again, causing an infinite loop while the kernel boots. Advance to the next comma-separated entry, or stop parsing when there is no next entry, before continuing so that the remaining entries are processed normally. | |||||
| CVE-2026-89932 | 2026-09-17 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always flush vpid02 on first use Make sure vpid02 is always flushed on first use by setting last_vpid=0 when allocating vpid02. nested_vmx_transition_tlb_flush() will always detect a VPID change on first VM-Enter after VMXON, because VPID=0 in vmcs12 is not allowed if L1 enables VPID. This avoids using stale TLB entries from a previous lifetime of the VPID, that might have been associated with a different vCPU (or a completely different VM). Note that last_vpid is already being initialized as 0 when the vCPU is created, but it is not reset when vpid02 is freed on VMXOFF. Hence, the problem can only occur if L1 does VMXOFF -> VMXON, runs an L2, and KVM happens to reuse a VPID that has TLB entries on the physical CPU. | |||||
| CVE-2026-89929 | 2026-09-17 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU When emulating INVVPID, KVM executes INVVPID on the physical CPU using vpid02 (instead of the L1 assigned VPID), after doing some validations on the operands. However, it is possible that the physical CPU KVM executes INVVPID on is different from the CPU L2 is running on. For example, in the following scenario: - L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1) - L1 migrates to CPU #2 and executes INVVPID - KVM executes INVVPID on CPU #2 - L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02.cpu=1) The TLB entries on CPU #1 are never invalidated, because INVVPID was executed on CPU #2, and vmcs02 never ran on a different pCPU (i.e. vmx_vcpu_load_vmcs() will *not* request KVM_REQ_TLB_FLUSH). Ensure that INVVPID is being executed on the same pCPU that L2 last ran on, and if not, fallback to clearing last_vpid=0 to trigger a full VPID flush on the next nested VM-Enter (as KVM will detect L1 using a different VPID for L2). If L2 ends up running on a different pCPU, KVM will flush the TLB anyway through vmx_vcpu_load_vmcs(). | |||||
| CVE-2026-89913 | 2026-09-17 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each() and dereferences the returned struct vgic_irq in the loop body without holding a reference on the LPI. The xarray iterator only provides temporary RCU coverage while looking up the current entry. That is not sufficient for this loop body, which reads fields from struct vgic_irq and performs guest memory accesses before the iteration completes. A concurrent path can trigger this race: the irqfd cached injection path (vgic_its_inject_cached_translation) obtains a transient LPI reference via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex, config_lock, or its_lock. If guest ITS DISCARD then drops the cache and ITE references under its_lock, the transient inject reference may become the final one. When vgic_put_irq() drops it, the LPI is erased from lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables() may still hold a stale pointer obtained from the xarray iterator and dereference it after the RCU grace period completes. Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes a stable reference, and dropping it with vgic_put_irq() on all paths. This matches the pattern already used by other lpi_xa iterators in the vgic ITS code. | |||||
| CVE-2026-89822 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Guard against NULL driver_data in i915_pci_probe() pci_match_device() can return the dummy pci_device_id_any entry when a device is force-bound via sysfs driver_override, in which case ->driver_data is unset (NULL). i915_pci_probe() casts it to struct intel_device_info * unconditionally and dereferences intel_info->require_force_probe, causing a NULL-ptr-deref. (cherry picked from commit 2727922084672cc274ecea726ea00363c2893731) | |||||
| CVE-2026-89814 | 2026-09-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clamp the isolation index for rings outside a partition adev->isolation[] has one slot per partition, but a ring that is not assigned to one keeps AMDGPU_XCP_NO_PARTITION, which is ~0, so indexing the array with it is out of bounds. SDMA submissions hit this on both the isolation enforcement and the VM flush path and trip UBSAN. Fall back to the first slot the way the cleaner shader path already does, and stop taking the address before the ring type check that makes it relevant. | |||||
| CVE-2026-89813 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the KIQ ring fences on reset Like the MES scheduler ring, the KIQ ring sets no_scheduler = true and uses a polling fence, so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). Its hw fence value lives in wb (GTT) memory and survives a MODE1 reset while fence_drv.sync_seq keeps advancing, so after a reset the first KIQ submission can poll forever on a seq that is never written back. Force complete the KIQ ring fences too so their hw fence is realigned to sync_seq. | |||||
| CVE-2026-89812 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: force complete the MES ring fences on reset The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1 reset, while fence_drv.sync_seq keeps advancing for every packet. When the reset is triggered because MES itself stopped responding, the timed-out packets advance sync_seq past the last hw fence value MES wrote. After resume the first MES submission polls forever on a seq that is never written back, failing the resume and wedging the box on a second reset: amdgpu: MES ring buffer is full. amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110) amdgpu: resume of IP block <gfx_v11_0> failed -110 amdgpu: GPU reset end with ret = -110 Force complete the MES scheduler ring fences together with the scheduler rings so their hw fence is realigned to sync_seq. v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. | |||||
| CVE-2026-89811 | 2026-09-17 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add TLB flush after MES queue eviction/suspension MES (Micro Engine Scheduler) does not perform heavy-weight TLB invalidation after unmapping queues, unlike HWS which does this automatically. This causes a race condition where in-flight DMA descriptors can access memory that has been unmapped, leading to page faults and GPU queue hangs during SVM page migration. The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU compute queue hangs with packets submitted but never consumed. Add kfd_flush_tlb() calls after MES queue removal in two locations: - evict_process_queues_cpsch(): after all queues removed during eviction - suspend_queues(): after debug/criu queue suspension (with mem_fence barrier) This ensures all in-flight memory accesses from unmapped queues are flushed before memory is freed or migrated. (cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) | |||||
| CVE-2026-89810 | 2026-09-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix error path at svm_migrate_copy_to_ram If page migration from device to sys ram fails for some reasons driver needs release and unlock allocated system pages. To do that driver should use page physical address, or pfn, then get struct page*. Current driver uses dma address(for adev) that is not correct with IOMMU enabled, or even in general. The patch releases and unlocks allocated system pages based on where migration failed by struct page* of sys ram pages. Also dma_unmap correspodent system ram pages at error path. | |||||