Total
399085 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-47747 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition In the ether3_probe function, a timer is initialized with a callback function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is started, there is a risk of a race condition if the module or device is removed, triggering the ether3_remove function to perform cleanup. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ether3_ledoff ether3_remove | free_netdev(dev); | put_devic | kfree(dev); | | ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); | // use dev Fix it by ensuring that the timer is canceled before proceeding with the cleanup in ether3_remove. | |||||
| CVE-2024-47745 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm: call the security_mmap_file() LSM hook in remap_file_pages() The remap_file_pages syscall handler calls do_mmap() directly, which doesn't contain the LSM security check. And if the process has called personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for RW pages, this will actually result in remapping the pages to RWX, bypassing a W^X policy enforced by SELinux. So we should check prot by security_mmap_file LSM hook in the remap_file_pages syscall handler before do_mmap() is called. Otherwise, it potentially permits an attacker to bypass a W^X policy enforced by SELinux. The bypass is similar to CVE-2016-10044, which bypass the same thing via AIO and can be found in [1]. The PoC: $ cat > test.c int main(void) { size_t pagesz = sysconf(_SC_PAGE_SIZE); int mfd = syscall(SYS_memfd_create, "test", 0); const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE, MAP_SHARED, mfd, 0); unsigned int old = syscall(SYS_personality, 0xffffffff); syscall(SYS_personality, READ_IMPLIES_EXEC | old); syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0); syscall(SYS_personality, old); // show the RWX page exists even if W^X policy is enforced int fd = open("/proc/self/maps", O_RDONLY); unsigned char buf2[1024]; while (1) { int ret = read(fd, buf2, 1024); if (ret <= 0) break; write(1, buf2, ret); } close(fd); } $ gcc test.c -o test $ ./test | grep rwx 7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted) [PM: subject line tweaks] | |||||
| CVE-2024-47742 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Block path traversal Most firmware names are hardcoded strings, or are constructed from fairly constrained format strings where the dynamic parts are just some hex numbers or such. However, there are a couple codepaths in the kernel where firmware file names contain string components that are passed through from a device or semi-privileged userspace; the ones I could find (not counting interfaces that require root privileges) are: - lpfc_sli4_request_firmware_update() seems to construct the firmware filename from "ModelName", a string that was previously parsed out of some descriptor ("Vital Product Data") in lpfc_fill_vpd() - nfp_net_fw_find() seems to construct a firmware filename from a model name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I think parses some descriptor that was read from the device. (But this case likely isn't exploitable because the format string looks like "netronome/nic_%s", and there shouldn't be any *folders* starting with "netronome/nic_". The previous case was different because there, the "%s" is *at the start* of the format string.) - module_flash_fw_schedule() is reachable from the ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is enough to pass the privilege check), and takes a userspace-provided firmware name. (But I think to reach this case, you need to have CAP_NET_ADMIN over a network namespace that a special kind of ethernet device is mapped into, so I think this is not a viable attack path in practice.) Fix it by rejecting any firmware names containing ".." path components. For what it's worth, I went looking and haven't found any USB device drivers that use the firmware loader dangerously. | |||||
| CVE-2024-47741 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race setting file private on concurrent lseek using same fd When doing concurrent lseek(2) system calls against the same file descriptor, using multiple threads belonging to the same process, we have a short time window where a race happens and can result in a memory leak. The race happens like this: 1) A program opens a file descriptor for a file and then spawns two threads (with the pthreads library for example), lets call them task A and task B; 2) Task A calls lseek with SEEK_DATA or SEEK_HOLE and ends up at file.c:find_desired_extent() while holding a read lock on the inode; 3) At the start of find_desired_extent(), it extracts the file's private_data pointer into a local variable named 'private', which has a value of NULL; 4) Task B also calls lseek with SEEK_DATA or SEEK_HOLE, locks the inode in shared mode and enters file.c:find_desired_extent(), where it also extracts file->private_data into its local variable 'private', which has a NULL value; 5) Because it saw a NULL file private, task A allocates a private structure and assigns to the file structure; 6) Task B also saw a NULL file private so it also allocates its own file private and then assigns it to the same file structure, since both tasks are using the same file descriptor. At this point we leak the private structure allocated by task A. Besides the memory leak, there's also the detail that both tasks end up using the same cached state record in the private structure (struct btrfs_file_private::llseek_cached_state), which can result in a use-after-free problem since one task can free it while the other is still using it (only one task took a reference count on it). Also, sharing the cached state is not a good idea since it could result in incorrect results in the future - right now it should not be a problem because it end ups being used only in extent-io-tree.c:count_range_bits() where we do range validation before using the cached state. Fix this by protecting the private assignment and check of a file while holding the inode's spinlock and keep track of the task that allocated the private, so that it's used only by that task in order to prevent user-after-free issues with the cached state record as well as potentially using it incorrectly in the future. | |||||
| CVE-2024-47740 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: Require FMODE_WRITE for atomic write ioctls The F2FS ioctls for starting and committing atomic writes check for inode_owner_or_capable(), but this does not give LSMs like SELinux or Landlock an opportunity to deny the write access - if the caller's FSUID matches the inode's UID, inode_owner_or_capable() immediately returns true. There are scenarios where LSMs want to deny a process the ability to write particular files, even files that the FSUID of the process owns; but this can currently partially be bypassed using atomic write ioctls in two ways: - F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can truncate an inode to size 0 - F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert changes another process concurrently made to a file Fix it by requiring FMODE_WRITE for these operations, just like for F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these ioctls when intending to write into the file, that seems unlikely to break anything. | |||||
| CVE-2024-47739 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: padata: use integer wrap around to prevent deadlock on seq_nr overflow When submitting more than 2^32 padata objects to padata_do_serial, the current sorting implementation incorrectly sorts padata objects with overflowed seq_nr, causing them to be placed before existing objects in the reorder list. This leads to a deadlock in the serialization process as padata_find_next cannot match padata->seq_nr and pd->processed because the padata instance with overflowed seq_nr will be selected next. To fix this, we use an unsigned integer wrap around to correctly sort padata objects in scenarios with integer overflow. | |||||
| CVE-2024-47732 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - Fix potential use after free bug The free_device_compression_mode(iaa_device, device_mode) function frees "device_mode" but it iss passed to iaa_compression_modes[i]->free() a few lines later resulting in a use after free. The good news is that, so far as I can tell, nothing implements the ->free() function and the use after free happens in dead code. But, with this fix, when something does implement it, we'll be ready. :) | |||||
| CVE-2024-47730 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - inject error before stopping queue The master ooo cannot be completely closed when the accelerator core reports memory error. Therefore, the driver needs to inject the qm error to close the master ooo. Currently, the qm error is injected after stopping queue, memory may be released immediately after stopping queue, causing the device to access the released memory. Therefore, error is injected to close master ooo before stopping queue to ensure that the device does not access the released memory. | |||||
| CVE-2024-47727 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix "in-kernel MMIO" check TDX only supports kernel-initiated MMIO operations. The handle_mmio() function checks if the #VE exception occurred in the kernel and rejects the operation if it did not. However, userspace can deceive the kernel into performing MMIO on its behalf. For example, if userspace can point a syscall to an MMIO address, syscall does get_user() or put_user() on it, triggering MMIO #VE. The kernel will treat the #VE as in-kernel MMIO. Ensure that the target MMIO address is within the kernel before decoding instruction. | |||||
| CVE-2024-47726 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to wait dio completion It should wait all existing dio write IOs before block removal, otherwise, previous direct write IO may overwrite data in the block which may be reused by other inode. | |||||
| CVE-2024-47724 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: use work queue to process beacon tx event Commit 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template") from Feb 28, 2024 (linux-next), leads to the following Smatch static checker warning: drivers/net/wireless/ath/ath11k/wmi.c:1742 ath11k_wmi_p2p_go_bcn_ie() warn: sleeping in atomic context The reason is that ath11k_bcn_tx_status_event() will directly call might sleep function ath11k_wmi_cmd_send() during RCU read-side critical sections. The call trace is like: ath11k_bcn_tx_status_event() -> rcu_read_lock() -> ath11k_mac_bcn_tx_event() -> ath11k_mac_setup_bcn_tmpl() …… -> ath11k_wmi_bcn_tmpl() -> ath11k_wmi_cmd_send() -> rcu_read_unlock() Commit 886433a98425 ("ath11k: add support for BSS color change") added the ath11k_mac_bcn_tx_event(), commit 01e782c89108 ("ath11k: fix warning of RCU usage for ath11k_mac_get_arvif_by_vdev_id()") added the RCU lock to avoid warning but also introduced this BUG. Use work queue to avoid directly calling ath11k_mac_bcn_tx_event() during RCU critical sections. No need to worry about the deletion of vif because cancel_work_sync() will drop the work if it doesn't start or block vif deletion until the running work is done. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 | |||||
| CVE-2024-47723 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix out-of-bounds in dbNextAG() and diAlloc() In dbNextAG() , there is no check for the case where bmp->db_numag is greater or same than MAXAG due to a polluted image, which causes an out-of-bounds. Therefore, a bounds check should be added in dbMount(). And in dbNextAG(), a check for the case where agpref is greater than bmp->db_numag should be added, so an out-of-bounds exception should be prevented. Additionally, a check for the case where agno is greater or same than MAXAG should be added in diAlloc() to prevent out-of-bounds. | |||||
| CVE-2024-47721 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: remove unused C2H event ID RTW89_MAC_C2H_FUNC_READ_WOW_CAM to prevent out-of-bounds reading The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't implemented, but driver expects number of handlers is NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by removing ID. Addresses-Coverity-ID: 1598775 ("Out-of-bounds read") | |||||
| CVE-2024-47714 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.6 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: use hweight16 to get correct tx antenna The chainmask is u16 so using hweight8 cannot get correct tx_ant. Without this patch, the tx_ant of band 2 would be -1 and lead to the following issue: BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e] | |||||
| CVE-2024-47712 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.3 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param In the `wilc_parse_join_bss_param` function, the TSF field of the `ies` structure is accessed after the RCU read-side critical section is unlocked. According to RCU usage rules, this is illegal. Reusing this pointer can lead to unpredictable behavior, including accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the TSF value is now stored in a local variable `ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is then assigned using this local variable, ensuring that the TSF value is safely accessed. | |||||
| CVE-2024-47711 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't return OOB skb in manage_oob(). syzbot reported use-after-free in unix_stream_recv_urg(). [0] The scenario is 1. send(MSG_OOB) 2. recv(MSG_OOB) -> The consumed OOB remains in recv queue 3. send(MSG_OOB) 4. recv() -> manage_oob() returns the next skb of the consumed OOB -> This is also OOB, but unix_sk(sk)->oob_skb is not cleared 5. recv(MSG_OOB) -> unix_sk(sk)->oob_skb is used but already freed The recent commit 8594d9b85c07 ("af_unix: Don't call skb_get() for OOB skb.") uncovered the issue. If the OOB skb is consumed and the next skb is peeked in manage_oob(), we still need to check if the skb is OOB. Let's do so by falling back to the following checks in manage_oob() and add the test case in selftest. Note that we need to add a similar check for SIOCATMARK. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa6/0xb0 net/unix/af_unix.c:2959 Read of size 4 at addr ffff8880326abcc4 by task syz-executor178/5235 CPU: 0 UID: 0 PID: 5235 Comm: syz-executor178 Not tainted 6.11.0-rc5-syzkaller-00742-gfbdaffe41adc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 unix_stream_read_actor+0xa6/0xb0 net/unix/af_unix.c:2959 unix_stream_recv_urg+0x1df/0x320 net/unix/af_unix.c:2640 unix_stream_read_generic+0x2456/0x2520 net/unix/af_unix.c:2778 unix_stream_recvmsg+0x22b/0x2c0 net/unix/af_unix.c:2996 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1068 ____sys_recvmsg+0x1db/0x470 net/socket.c:2816 ___sys_recvmsg net/socket.c:2858 [inline] __sys_recvmsg+0x2f0/0x3e0 net/socket.c:2888 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5360d6b4e9 Code: 48 83 c4 28 c3 e8 37 17 00 00 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff29b3a458 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 00007fff29b3a638 RCX: 00007f5360d6b4e9 RDX: 0000000000002001 RSI: 0000000020000640 RDI: 0000000000000003 RBP: 00007f5360dde610 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007fff29b3a628 R14: 0000000000000001 R15: 0000000000000001 </TASK> Allocated by task 5235: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x16b/0x320 mm/slub.c:4080 __alloc_skb+0x1c3/0x440 net/core/skbuff.c:667 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc3/0x770 net/core/skbuff.c:6528 sock_alloc_send_pskb+0x91a/0xa60 net/core/sock.c:2815 sock_alloc_send_skb include/net/sock.h:1778 [inline] queue_oob+0x108/0x680 net/unix/af_unix.c:2198 unix_stream_sendmsg+0xd24/0xf80 net/unix/af_unix.c:2351 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5235: kasan_save_stack mm/kasan/common.c:47 ---truncated--- | |||||
| CVE-2024-47706 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix possible UAF for bfqq->bic with merge chain 1) initial state, three tasks: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | Λ | Λ | Λ | | | | | | V | V | V | bfqq1 bfqq2 bfqq3 process ref: 1 1 1 2) bfqq1 merged to bfqq2: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) | | | Λ \--------------\| | | V V | bfqq1--------->bfqq2 bfqq3 process ref: 0 2 1 3) bfqq2 merged to bfqq3: Process 1 Process 2 Process 3 (BIC1) (BIC2) (BIC3) here -> Λ | | \--------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3 process ref: 0 1 3 In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then get bfqq3 through merge chain, and finially handle IO by bfqq3. Howerver, current code will think bfqq2 is owned by BIC1, like initial state, and set bfqq2->bic to BIC1. bfq_insert_request -> by Process 1 bfqq = bfq_init_rq(rq) bfqq = bfq_get_bfqq_handle_split bfqq = bic_to_bfqq -> get bfqq2 from BIC1 bfqq->ref++ rq->elv.priv[0] = bic rq->elv.priv[1] = bfqq if (bfqq_process_refs(bfqq) == 1) bfqq->bic = bic -> record BIC1 to bfqq2 __bfq_insert_request new_bfqq = bfq_setup_cooperator -> get bfqq3 from bfqq2->new_bfqq bfqq_request_freed(bfqq) new_bfqq->ref++ rq->elv.priv[1] = new_bfqq -> handle IO by bfqq3 Fix the problem by checking bfqq is from merge chain fist. And this might fix a following problem reported by our syzkaller(unreproducible): ================================================================== BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595 CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kblockd blk_mq_requeue_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0x10d/0x610 mm/kasan/report.c:475 kasan_report+0x8e/0xc0 mm/kasan/report.c:588 bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline] bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline] bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889 bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757 bfq_init_rq block/bfq-iosched.c:6876 [inline] bfq_insert_request block/bfq-iosched.c:6254 [inline] bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304 blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593 blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700 worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305 </TASK> Allocated by task 20776: kasan_save_stack+0x20/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3458 [inline] kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503 ioc_create_icq block/blk-ioc.c:370 [inline] ---truncated--- | |||||
| CVE-2024-47703 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf, lsm: Add check for BPF LSM return value A bpf prog returning a positive number attached to file_alloc_security hook makes kernel panic. This happens because file system can not filter out the positive number returned by the LSM prog using IS_ERR, and misinterprets this positive number as a file pointer. Given that hook file_alloc_security never returned positive number before the introduction of BPF LSM, and other BPF LSM hooks may encounter similar issues, this patch adds LSM return value check in verifier, to ensure no unexpected value is returned. | |||||
| CVE-2024-47702 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fail verification for sign-extension of packet data/data_end/data_meta syzbot reported a kernel crash due to commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses"). The reason is due to sign-extension of 32-bit load for packet data/data_end/data_meta uapi field. The original code looks like: r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */ r0 = r2 r0 += 8 if r3 > r0 goto +1 ... Note that __sk_buff->data load has 32-bit sign extension. After verification and convert_ctx_accesses(), the final asm code looks like: r2 = *(u64 *)(r1 +208) r2 = (s32)r2 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 ... Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid which may cause runtime failure. Currently, in C code, typically we have void *data = (void *)(long)skb->data; void *data_end = (void *)(long)skb->data_end; ... and it will generate r2 = *(u64 *)(r1 +208) r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 If we allow sign-extension, void *data = (void *)(long)(int)skb->data; void *data_end = (void *)(long)skb->data_end; ... the generated code looks like r2 = *(u64 *)(r1 +208) r2 <<= 32 r2 s>>= 32 r3 = *(u64 *)(r1 +80) r0 = r2 r0 += 8 if r3 > r0 goto pc+1 and this will cause verification failure since "r2 <<= 32" is not allowed as "r2" is a packet pointer. To fix this issue for case r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */ this patch added additional checking in is_valid_access() callback function for packet data/data_end/data_meta access. If those accesses are with sign-extenstion, the verification will fail. [1] https://lore.kernel.org/bpf/000000000000c90eee061d236d37@google.com/ | |||||
| CVE-2024-47701 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid OOB when system.data xattr changes underneath the filesystem When looking up for an entry in an inlined directory, if e_value_offs is changed underneath the filesystem by some change in the block device, it will lead to an out-of-bounds access that KASAN detects as an UAF. EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none. loop0: detected capacity change from 2048 to 2047 ================================================================== BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103 CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500 ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697 __ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573 ext4_lookup_entry fs/ext4/namei.c:1727 [inline] ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795 lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633 filename_create+0x297/0x540 fs/namei.c:3980 do_symlinkat+0xf9/0x3a0 fs/namei.c:4587 __do_sys_symlinkat fs/namei.c:4610 [inline] __se_sys_symlinkat fs/namei.c:4607 [inline] __x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f3e73ced469 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469 RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0 RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290 R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0 </TASK> Calling ext4_xattr_ibody_find right after reading the inode with ext4_get_inode_loc will lead to a check of the validity of the xattrs, avoiding this problem. | |||||