Total
19303 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-64353 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Keep dynamic inner array lookups nullable An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its inner map template. A concrete inner array with a different max_entries value can then replace the template. After a successful outer map lookup, the verifier represents the resulting map pointer using the inner map template. Const-key lookup nullness elision consequently uses the template max_entries even though the runtime helper uses the concrete inner map max_entries. Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP, because the template max_entries does not prove that the key is in bounds for the concrete runtime map. | |||||
| CVE-2026-64337 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: unmap request DMA on queue failure mtu3_gadget_queue() maps the request before checking whether the QMU GPD ring can accept another transfer. the request is returned with -EAGAIN before it is linked on the endpoint request list if mtu3_prepare_transfer() fails. Normal completion and dequeue paths unmap requests from mtu3_req_complete(), but this error path never reaches that helper, so the DMA mapping is left active. Unmap the request before returning from the failed queue path. | |||||
| CVE-2026-64338 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: USB: misc: uss720: unregister parport on probe failure uss720_probe() registers a parport before reading the 1284 register used to detect unsupported Belkin F5U002 adapters. If get_1284_register() fails, the error path drops the driver private data and the USB device reference, but leaves the parport device registered. Leaving the port registered is more than a private allocation leak: parport_register_port() has already reserved a parport number and registered the parport bus device, while pp->private_data still points at the private data that the common error path is about to release. Undo the pre-announce registration in the get_1284_register() failure branch before jumping to the common private-data cleanup path. Clear priv->pp first, matching the disconnect path and avoiding a stale pointer in the private data. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | |||||
| CVE-2026-64339 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len) into the caller's buffer. bpkt_len is fully controlled by the device and is only checked against ibuf_len; ibuf_len in turn is checked against usbio->txbuf_len, not against rxbuf_len: if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || (ibuf_len > (usbio->txbuf_len - sizeof(*bpkt)))) return -EMSGSIZE; txbuf_len and rxbuf_len are taken independently from the bulk OUT and bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or malfunctioning device that advertises a large bulk OUT endpoint and a small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab object. The over-read bytes are handed back to the i2c layer and on to user space through i2c-dev, disclosing adjacent slab memory; with KASAN this is reported as a slab-out-of-bounds read. The number of bytes actually received is already known: act equals the URB actual_length and is bounded by rxbuf_len. Reject any response that claims more payload than was received, mirroring the existing "act < sizeof(*bpkt)" check just above. The control path (usbio_ctrl_msg()) is not affected: it uses a single buffer (ctrlbuf) for both directions, so its analogous copy can never leave the allocation. Found by code review. The out-of-bounds read was confirmed under AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is also available. | |||||
| CVE-2026-64340 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | |||||
| CVE-2026-64341 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | |||||
| CVE-2026-64342 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler. | |||||
| CVE-2026-64343 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | |||||
| CVE-2026-64344 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | |||||
| CVE-2026-64345 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_printer: take kref only for successful open printer_open() returns -EBUSY when the character device is already open, but it increments dev->kref regardless of the return value. VFS does not call ->release() for a failed open, so every rejected second open permanently leaks one reference. Move kref_get() into the successful-open branch. | |||||
| CVE-2026-64311 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: loongson - Remove broken and unused loongson-rng The loongson-rng rng_alg has several vulnerabilities, including not providing forward security, and a use-after-free bug due to the use of wait_for_completion_interruptible(). Meanwhile, the rng_alg framework doesn't really have any purpose in the first place other than to access the software algorithms crypto/drbg.c and crypto/jitterentropy.c. Hardware-specific rng_algs have no in-kernel user, and unlike hwrng there's no feed into the actual Linux RNG. As such, there's really no point to this code. There are of course other rng_alg drivers that are similarly unused, but they're similarly in the process of being phased out, e.g. https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org Given that, there's no point in fixing forward these vulnerabilities, and it makes much more sense to simply roll back the addition of this driver. If this platform provides TRNG (not PRNG) functionality, it could make sense to add a hwrng driver, but it would be quite different. | |||||
| CVE-2026-64312 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - restore callback for non-parallel fallback pcrypt installs pcrypt_aead_done() on the child AEAD request before trying to submit it through padata. If padata_do_parallel() returns -EBUSY, pcrypt falls back to calling the child AEAD directly. That fallback must not keep the padata completion callback. Otherwise an asynchronous completion runs pcrypt_aead_done() even though the request was never enrolled in padata. Restore the original request callback and callback data before calling the child AEAD directly. This keeps the fallback path aligned with a direct AEAD request while leaving the parallel path unchanged. | |||||
| CVE-2026-64313 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ecc - Fix carry overflow in vli multiplication The carry flag calculation fails when r01.m_high is saturated (0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows. The condition (r01.m_high < product.m_high) doesn't handle the case where r01.m_high == product.m_high and an additional carry exists from lower-bit overflow. When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") introduced crypto/ecc.c, it split the muladd() function in the micro-ecc library into separate mul_64_64() and add_128_128() helpers. It seems the check got lost in translation. Add proper handling for this boundary by accounting for the carry from the lower addition. | |||||
| CVE-2026-64314 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: chacha20poly1305 - validate poly1305 template argument chachapoly_create() still accepts the compatibility poly1305 parameter in the template name, but it assumes the second template argument is always present and immediately passes it to strcmp(). When the argument is missing, crypto_attr_alg_name() returns an error pointer. Check for that before comparing the name so malformed template instantiations fail with an error instead of dereferencing the error pointer in strcmp(). This matches the surrounding Crypto API template pattern where crypto_attr_alg_name() results are validated before string-specific use. | |||||
| CVE-2026-64315 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | |||||
| CVE-2026-64316 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. | |||||
| CVE-2026-64318 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold. | |||||
| CVE-2026-64319 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: validate reply message payload bounds against transfer length nvmet_auth_reply() accesses the variable-length rval[] array using attacker-controlled hl (hash length) and dhvlen (DH value length) fields without verifying they fit within the allocated buffer of tl bytes. A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a small transfer length but large hl/dhvlen values, causing out-of-bounds heap reads when the target processes the DH public key (rval + 2*hl) or performs the host response memcmp. With DH authentication configured, the OOB pointer is passed directly to sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching up to 526 bytes past the buffer. This is exploitable pre-authentication. Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before any access to the variable-length fields. Discovered by Atuin - Automated Vulnerability Discovery Engine. | |||||
| CVE-2026-64320 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page nvmet_execute_disc_get_log_page() validates only the dword alignment of the host-supplied Log Page Offset (lpo). The 64-bit offset is then added to a small kzalloc'd buffer that holds the discovery log page and the result is passed straight to nvmet_copy_to_sgl(), which memcpy()s data_len bytes out to the host with no source-side bound check: u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */ size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */ ... if (offset & 0x3) { ... } /* only check */ ... alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req); buffer = kzalloc(alloc_len, GFP_KERNEL); ... status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len); The Discovery controller is unauthenticated -- nvmet_host_allowed() returns true unconditionally for the discovery subsystem -- so the call is reachable pre-authentication by any TCP/RDMA/FC peer that can reach the nvmet target. With a discovery log page of ~1 KiB, an attacker requesting up to 4 KiB starting at offset == alloc_len reads the next slab page out and gets its content returned over the fabric (an empirical run on a default nvmet-tcp loopback target leaked 81 canonical kernel pointers in one Get Log Page response). Pointing the offset at unmapped kernel memory faults the in-kernel memcpy and crashes (or panics, on panic_on_oops=1) the target host instead. The attacker-controlled source-side offset pattern "nvmet_copy_to_sgl(req, 0, buffer + ATTACKER_OFFSET, ...)" is unique to nvmet_execute_disc_get_log_page in the entire nvmet codebase: every other Get Log Page handler in admin-cmd.c either ignores lpo (and silently starts every response at offset 0) or tracks a local destination offset with a fixed source pointer. Validate the host-supplied offset against the log page size, cap the copy length to what is actually available, and zero-fill any remainder of the host transfer buffer. The zero-fill matches the existing short-response pattern in nvmet_execute_get_log_changed_ns() (admin-cmd.c) and prevents leaking transport SGL contents when the host asks for more bytes than the log page contains. | |||||
| CVE-2026-64444 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 8.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each iteration but only guards on i < pkt_len. When a malicious AP sends an AssocResponse whose last IE has only one byte remaining in the frame (the element_id byte lands at pkt_len-1), the loop reads pIE->length from pframe[pkt_len], which is one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond pkt_len, silently passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len. | |||||