Total
398636 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-68168 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix afs_edit_dir_remove() to get, not find, block 0 Fix afs_edit_dir_remove() to use afs_dir_get_block() to get block 0 rather than afs_dir_find_block() as the latter caches the found block in the afs_dir_iter and may[*] switch out the page it's on if another afs_dir_find_block() is done. This parallels what afs_edit_dir_add() does. [*] There's more than one block per page. | |||||
| CVE-2026-68167 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not try compression for data reloc inodes [BUG] There is a syzbot report that the check inside get_new_location() triggered: BTRFS info (device loop0): found 31 extents, stage: move data extents BTRFS info (device loop0): leaf 8908800 gen 16 total ptrs 28 free space 1676 owner 18446744073709551607 item 0 key (256 INODE_ITEM 0) itemoff 3835 itemsize 160 inode generation 5 transid 0 size 0 nbytes 0 block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x0 atime 1669132761.0 ctime 1669132761.0 mtime 1669132761.0 otime 0.0 item 1 key (256 INODE_REF 256) itemoff 3823 itemsize 12 index 0 name_len 2 item 2 key (258 INODE_ITEM 0) itemoff 3663 itemsize 160 inode generation 1 transid 16 size 733184 nbytes 106496 block group 0 mode 100600 links 0 uid 0 gid 0 rdev 0 sequence 24 flags 0x18 item 3 key (258 EXTENT_DATA 0) itemoff 3595 itemsize 68 generation 16 type 0 inline extent data size 47 ram_bytes 4096 compression 1 [...] item 27 key (18446744073709551611 ORPHAN_ITEM 258) itemoff 2376 itemsize 0 BTRFS error (device loop0): unexpected non-zero offset in file extent item for data reloc inode 258 key offset 0 offset 9277520992061368337 ------------[ cut here ]------------ btrfs_abort_should_print_stack(__error) [CAUSE] The above dump tree shows the first file extent item is inlined, which should make no sense for data reloc inodes, as such inodes just represent where the data extents are in the relocation destination chunk. However the relocation path preallocates space for each block, then dirties them, cluster by cluster. It's possible to have a single block at the beginning of the block group, and no other block in the same cluster. So relocation will preallocate a file extent for that block and dirty the first block. Then memory pressure forces the data reloc inode to be written back, before any other blocks are dirtied/allocated. Finally commit 3eaf5f082c4c ("btrfs: extract inlined creation into a dedicated delalloc helper") changed the sequence of delalloc. Before that commit we always tried NOCOW first, so that dirtied block would be written back into the preallocated space, and appear as a regular extent. But with that commit, we always try inline first, and since compression is forced, we try compressing the first block, and then inline the compressed data, resulting in the above inlined file extent in the data reloc tree. Then the check in get_new_location() will check the file offset, without checking if the file extent is inlined or not, resulting in the above failure. [FIX] Do not allow compression for data reloc inodes. Since data reloc inode sizes are always block aligned, as long as we do not compress, @data_len will always be at least one block, and that will cause can_cow_file_range_inline() to return false, thus no inlined extent will be created. | |||||
| CVE-2026-68163 | 2026-08-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: mm/page_vma_mapped: fix device-private PMD handling Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") introduced the concept of device-private PMD entries, but did not correctly update the rmap walk code to account for them. As a result, when page_vma_mapped_walk() encounters device-private PMD entries, it takes no action other than to acquire the PMD lock and exit. However this is highly problematic for two reasons - firstly, device private entries possess a PFN so check_pmd() needs to be called to ensure an overlapping PFN range. Secondly, and more importantly, if PVMW_MIGRATION is set the caller assumes the returned entry is a migration entry, resulting in memory corruption when the caller tries to interpret the device private entry as such. In addition, commit 146287290023 ("mm/huge_memory: implement device-private THP splitting") allowed device private PMDs to be split like THP mappings, but again did not update this code path. As a result, we might race a PMD split prior to acquiring the PMD lock. This patch addresses all of these issues by invoking check_pmd(), ensuring PMVW_MIGRATION is not set and checks whether a split raced us we do for PMD THP and migration entries. Instead of checking for a subset of the cases after taking the pmd_lock(), put device-private along with pmd_trans_huge() and pmd_is_migration_entry(). Also remove thp_migration_supported() as it is already guarded by pmd_is_migration_entry(). [akpm@linux-foundation.org: fix Raspberry Pi 1 build, per David] | |||||
| CVE-2026-68161 | 2026-08-17 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is destroyed. | |||||
| CVE-2026-68152 | 2026-08-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: amt: fix use-after-free in AMT delayed works When an AMT device is removed, pending delayed works can still access the freed amt_dev structure, which may result in kernel crashes or memory corruption. amt_dev_stop() cancels req_wq and discovery_wq with cancel_delayed_work_sync(), but these works can be scheduled again from event_wq after the cancellation. This allows delayed works to access the freed amt_dev structure after the netdev has been released. The following is a simple race scenario: CPU0 CPU1 amt_dev_stop() cancel_delayed_work_sync() amt_event_work() mod_delayed_work(req_wq) free netdev req_wq accesses freed amt_dev Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and discovery_wq from being queued again and wait for running work items to complete. The delayed works are disabled after initialization in amt_newlink() and enabled only when the device is successfully opened. This keeps the delayed work lifecycle synchronized with the lifetime of the AMT device. | |||||
| CVE-2026-68149 | 2026-08-17 | N/A | 8.4 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: fs: preserve ACL_DONT_CACHE state in forget_cached_acl() The ACL_DONT_CACHE state is meant to be a constant state for the inode for filesystems that want to opt out of posix acl caching. Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api") used this facility to opt out of posix acl caching for fuse inodes with fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl). The commit also takes care to gate the forget_all_cached_acls() call in fuse_set_acl() on fc->posix_acl because there is no need for it, but there are other placed in fuse code which call forget_all_cached_acls() unconditional to fc->posix_acl and those cause the loss of the ACL_DONT_CACHE state. This is not only a functional bug. Properly timed, a get_acl() from this fuse filesystem can return a stale cached value, as was observed in tests, because set_acl() does not invalidate the unintentional acl cache. We could fix this in fuse, but it actually makes no sense for the vfs helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so let it not do that to fix fuse and future users of ACL_DONT_CACHE. | |||||
| CVE-2026-68139 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Use sender devcom for MPV master-up After PCIe DPC recovery, mlx5 reloads the affected functions and replays multiport affiliation events. In the reported failure, the first relevant device error was: pcieport 0000:10:01.1: DPC: containment event pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal) pcieport 0000:10:01.1: [ 5] SDES (First) mlx5 recovered the PCI functions and resumed 0000:11:00.1. During that resume, RDMA multiport binding replayed MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent MPV_DEVCOM_MASTER_UP. The host then panicked with: BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] RDI: 0000000000000000 Call trace included: mlx5_devcom_comp_set_ready mlx5e_devcom_event_mpv mlx5_devcom_send_event mlx5_ib_bind_slave_port mlx5r_mp_probe mlx5_pci_resume MPV devcom registration publishes mlx5e private data to the component peer list before mlx5e_devcom_init_mpv() stores the returned component device in priv->devcom. A concurrent master-up event can therefore reach a peer whose private data is visible but whose priv->devcom backpointer is still NULL. MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private data as event_data. The ready bit is stored on the shared devcom component, not on an individual peer. Use the sender devcom when marking the MPV component ready. This preserves the readiness transition while avoiding a NULL dereference of the peer devcom pointer during affiliation replay after PCI error recovery. | |||||
| CVE-2026-68134 | 2026-08-17 | N/A | 7.3 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: ptp: ptp_s390: Add missing facility check Only register the physical clock when facility 28 is installed and PTFF QAF returns that PTFF QPT is available. | |||||
| CVE-2026-68133 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP Call Trace during PTP release If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will result in the following PTP release call trace during driver unload: kernel BUG at lib/list_debug.c:52! ice_ptp_release+0x332/0x3c0 [ice] ice_deinit_features.part.0+0x10e/0x120 [ice] ice_remove+0x100/0x220 [ice] This was observed when passing PF1 through to a VM. ice_ptp_init() fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT. Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and returning without error, preventing the invalid state transition to ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from ICE_PTP_RESETTING after a failed rebuild. | |||||
| CVE-2026-68128 | 2026-08-17 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: ice: reject out-of-range ptype in ice_parser_profile_init set_bit(rslt->ptype, prof->ptypes) operates on a DECLARE_BITMAP of ICE_FLOW_PTYPE_MAX (1024) bits. Nothing prevents a malicious VF from providing ptype >= 1024 through VIRTCHNL, resulting in a write past the end of the bitmap and a kernel page fault. Reproduced with a custom kernel module injecting a crafted VIRTCHNL_OP_ADD_RSS_CFG on E810-C QSFP (8086:1592), FW 4.91 0x800214af 1.3909.0, ICE COMMS DDP 1.3.53.0, kernel 7.1.0-rc1. crash_parser: ice_parser_profile_init @ ffffffffc0d61b60 crash_parser: setting ptype=0xffff (max valid=1023) crash_parser: calling ice_parser_profile_init -- expect OOB crash! BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 56 UID: 0 PID: 165011 Comm: insmod Kdump: loaded Tainted: G S U OE 7.1.0-rc1 #1 Hardware name: Intel Corporation S2600BPB/S2600BPB RIP: 0010:ice_parser_profile_init+0x2d/0x1d0 [ice] Call Trace: <TASK> ? __pfx_ice_parser_profile_init+0x10/0x10 [ice] crash_init+0x127/0xff0 [crash_parser] do_one_initcall+0x45/0x310 do_init_module+0x64/0x270 init_module_from_file+0xcc/0xf0 idempotent_init_module+0x17b/0x280 __x64_sys_finit_module+0x6e/0xe0 Bail out early with -EINVAL when ptype is out of range. | |||||
| CVE-2026-68126 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: mac802154: hold an interface reference across the scan worker mac802154_scan_worker() captures the scanning sub-interface under RCU and then keeps dereferencing sdata->dev after rcu_read_unlock() and outside the rtnl -- in the failure traces, in mac802154_transmit_beacon_req() (skb->dev = sdata->dev), and in the end_scan cleanup. Nothing keeps that netdev alive across the worker iteration. A concurrent DEL_INTERFACE or PHY removal can unregister the interface once the worker drops the rtnl between its two drv_set_channel() sections. unregister_netdevice() frees the netdev asynchronously from netdev_run_todo() with the rtnl already dropped, so neither holding the rtnl nor the per-PHY IEEE802154_IS_SCANNING flag prevents a stale worker iteration from dereferencing the freed netdev -- a KASAN slab-use-after-free, reachable by racing TRIGGER_SCAN against DEL_INTERFACE (both CAP_NET_ADMIN). Pin the netdev with netdev_hold() while the RCU read lock is still held, and release it at every worker exit. | |||||
| CVE-2026-68122 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ovpn: fix peer refcount leak in TCP error paths When either the TCP RX or TX error path calls ovpn_peer_hold() followed by schedule_work(&peer->tcp.defer_del_work), and the work item is already pending from the other path, schedule_work() returns false and the work runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put() exactly once, the extra reference taken by the losing path is never dropped, leaking the peer object. The race window: CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error): ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2 schedule_work() <- queued schedule_work() <- NO-OP (work already pending) ovpn_tcp_peer_del_work runs: ovpn_peer_del() ovpn_peer_put() <- refcnt+1 <- peer never freed Fix by checking the return value of schedule_work() in both paths and calling ovpn_peer_put() to drop the extra reference if the work was already pending. ovpn_peer_hold() is kept unconditional in the TX path as it cannot fail at that point. | |||||
| CVE-2026-68120 | 2026-08-17 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: rtase: Workaround for TX hang caused by hardware packet parsing The hardware performs packet parsing before packet transmission. Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX hang because the hardware parser expects additional protocol header data that is not present in the packet. The hardware performs additional PTP parsing on UDP packets identified by destination ports 319/320 at the expected UDP destination port offset. If such a packet has transport data smaller than RTASE_MIN_PAD_LEN, the hardware parser expects additional packet data and may trigger a TX hang. To avoid these hardware issues, the driver applies the following workarounds. Drop malformed packets that may trigger this hardware issue before transmission. For IPv4 non-initial fragments, the hardware does not check the fragment offset before parsing the expected transport header location. As a result, these packets are still subject to transport header parsing even though they do not contain a transport header. If the transport data is shorter than the minimum transport header required by the hardware parser, pad the transport data to the minimum transport header length required by the hardware parser. Packets that also match the hardware PTP parsing conditions continue to follow the corresponding workaround. For IPv6 fragmented packets, neither of the above hardware issues occurs because the hardware only continues packet parsing when the IPv6 Base Header Next Header field directly indicates UDP. Packets carrying a Fragment Header do not continue through the subsequent packet parsing stages. For packets identified for hardware PTP parsing, pad the transport data so it reaches RTASE_MIN_PAD_LEN before transmission. | |||||
| CVE-2026-68119 | 2026-08-17 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: tcp: initialize standalone TCP-AO response padding tcp_v4_send_ack() and tcp_v6_send_response() construct standalone TCP responses with TCP-AO options. The option length carries the actual MAC length, but the TCP header length includes the option rounded up to a four-byte boundary. tcp_ao_hash_hdr() writes the MAC only. Thus, when the MAC length is not four-byte aligned, the one to three bytes after the MAC are left uninitialized and may be transmitted. For the normal TCP-AO hashing mode, those bytes also have to be initialized before computing the MAC. Initialize only the alignment padding in the TCP-AO branches, before hashing the header. Use TCPOPT_NOP, as in the normal TCP-AO output path. This avoids adding work to non-AO TCP responses while preserving a valid authenticated header. | |||||
| CVE-2026-68116 | 2026-08-17 | N/A | 7.9 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix source list corruption on a failed replace When replacing the source list of an MDB remote entry, all existing sources are first marked for deletion and vxlan_mdb_remote_srcs_add() is then called to add the new source list. Sources present in the new list have their deletion mark cleared, and any sources left marked afterwards are removed. If vxlan_mdb_remote_srcs_add() fails partway through, its error path deletes all entries on the remote's source list. That rollback is only correct for its other caller, vxlan_mdb_remote_add(), where the remote was just allocated and the list contains solely entries added during the call. On the replace path the list also holds pre-existing sources, so a failed replace tears them down together with their (S, G) forwarding entries instead of leaving the entry unchanged. This is reachable from an existing (*, G) remote. An EXCLUDE filter that loses sources starts forwarding traffic that should be blocked, while an INCLUDE filter that loses sources drops traffic that should be forwarded. Mark entries created during the current pass with a new VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear the deletion mark on the pre-existing ones, so a failed replace leaves the source list untouched. Retain the flag until the whole operation succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from deleting a pre-existing entry it only looked up when adding that entry's forwarding entry fails. | |||||
| CVE-2026-68110 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma4.4.2: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit fa4f86a148271e325e95287630a3a15a9cd35fdc) | |||||
| CVE-2026-68109 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma7.1: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit c4f230b51cf2d3e7e8b1c800331f3dbed2a9e3f5) | |||||
| CVE-2026-68107 | 2026-08-17 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: avoid rereading IB param length Reuse the parameter length returned by vcn_v4_0_enc_find_ib_param() instead of rereading it from the IB. This avoids a potential TOCTOU issue if the IB contents change between reads. (cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) | |||||
| CVE-2026-68105 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix kernel panic during driver load failure Avoid kernel panic if MES init fails during driver load. The KIQ ring is falsely marked as ready as ASICs that use MES, KIQ is owned by MES. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu] Call Trace: gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu] amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu] amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu] amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu] amdgpu_gart_unbind+0x72/0x90 [amdgpu] amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu] amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu] amdttm_tt_unpopulate+0x29/0x70 [amdttm] ttm_bo_put+0x1eb/0x360 [amdttm] amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu] amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu] amdgpu_irq_fini_hw+0x58/0x80 [amdgpu] amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu] amdgpu_driver_load_kms+0x60/0xa0 [amdgpu] amdgpu_pci_probe+0x28e/0x6d0 [amdgpu] pci_device_probe+0x19f/0x220 really_probe+0x1ed/0x340 driver_probe_device+0x1e/0x80 __driver_attach+0xd3/0x1a0 bus_for_each_dev+0x68/0xa0 bus_add_driver+0x19f/0x270 driver_register+0x5d/0xf0 do_one_initcall+0xac/0x200 do_init_module+0x1ec/0x280 __se_sys_finit_module+0x2de/0x310 do_syscall_64+0x6a/0x250 entry_SYSCALL_64_after_hwframe+0x4b/0x53 (cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) | |||||
| CVE-2026-68103 | 2026-08-17 | N/A | 7.1 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject mapping a reserved doorbell to a new queue When creating an user-queue, the user space provides a doorbell BO handle and an offset within the bo to obtain a doorbell. However current implementation using xa_store_irq() to store a doorbell, which allows a later queue created with the same BO and offset parameters to overwrite an existing queue and doorbell mapping. This can cause problems like misrouting fence IRQ processing to a wrong queue, and mislead the cleanup process of one queue erasing the mapping of another queue. This commit fixes this issue by replacing xa_store_irq with xa_insert_irq, which rejects mapping a reserved doorbell to a newly created queue (cherry picked from commit 6244eae22966350db52faf9c1369d3b2ffc5de4e) | |||||