Total
398492 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-74729 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read put_fifo_with_discard() acts as both producer and consumer on the kfifo: it calls kfifo_skip() (advances out) and kfifo_put() (advances in) from the IRQ handler without synchronizing with snoop_file_read(), which also consumes via kfifo_to_user(). On SMP systems this concurrent access can leave (in - out) larger than the ring buffer, so __kfifo_to_user()'s clamp to (in - out) is ineffective and kfifo_copy_to_user() can attempt a copy_to_user() past the kmalloc-2k backing store: usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-2k' (offset 0, size 2049)! kernel BUG at mm/usercopy.c! Call trace: usercopy_abort __check_heap_object __check_object_size kfifo_copy_to_user __kfifo_to_user snoop_file_read vfs_read Serialize kfifo access with a per-channel spinlock shared between the IRQ handler (producer) and the file reader (consumer). Annotate @fifo with __guarded_by(&lock) and opt the driver into context analysis so the compiler enforces that all fifo access holds the lock. | |||||
| CVE-2026-74728 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: xfs: handle NULL b_addr in xfs_buf_free When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with bp->b_addr still NULL. The code falls through to the folio_put path which calls virt_to_folio(NULL), dereferencing an invalid address and causing a kernel crash. Call Trace: xfs_buf_free+0x25f/0x510 xfs_buf_alloc+0xc98/0x19b0 xfs_buf_find_insert+0x55/0x14d0 xfs_buf_get_map+0x122b/0x17c0 xfbtree_init_leaf_block+0x11c/0x4a0 xfbtree_init+0x1bb/0x460 xrep_rmap_setup_scan+0x100/0x1f0 xrep_rmapbt+0x41/0xc0 Fix this by skipping folio_put() when bp->b_addr is NULL. | |||||
| CVE-2026-74722 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leak in btrfs_do_encoded_write() Local fuzzing of 6.12.94 has found the following memory leak: Unreferenced object 0xffff888018050a80 (size 64): comm "syz.0.17", pid 10297, jiffies 4294953601 hex dump (first 32 bytes): 00 10 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 10 0a 05 18 80 88 ff ff 10 0a 05 18 80 88 ff ff ................ backtrace (crc a8a6fc29): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] extent_changeset_alloc fs/btrfs/extent_io.h:207 [inline] qgroup_reserve_data+0x1c5/0x7d0 fs/btrfs/qgroup.c:4305 btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355 btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746 btrfs_encoded_write fs/btrfs/file.c:1482 [inline] btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507 btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738 btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:47 [inline] do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f Unreferenced object 0xffff888018050a00 (size 64): comm "syz.0.17", pid 10297, jiffies 4294953601 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff 0f 00 00 00 00 00 00 ................ 90 0a 05 18 80 88 ff ff 90 0a 05 18 80 88 ff ff ................ backtrace (crc cb5c9580): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] ulist_prealloc+0x9c/0x110 fs/btrfs/ulist.c:114 extent_changeset_prealloc fs/btrfs/extent_io.h:217 [inline] __set_extent_bit+0x16b/0x1a70 fs/btrfs/extent-io-tree.c:1086 set_record_extent_bits+0x50/0x90 fs/btrfs/extent-io-tree.c:1821 qgroup_reserve_data+0x274/0x7d0 fs/btrfs/qgroup.c:4312 btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355 btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746 btrfs_encoded_write fs/btrfs/file.c:1482 [inline] btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507 btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738 btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:47 [inline] do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by freeing an extent changeset before returning from btrfs_do_encoded_write(). | |||||
| CVE-2026-74719 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix qentry overwrite for CONFIRM_LINK and ADD_LINK_CONT in smc_llc_event_handler() The SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT branch in smc_llc_event_handler() stores an incoming qentry into the local LLC flow without first checking whether a qentry is already pending. If a malicious or buggy peer sends a second CONFIRM_LINK or ADD_LINK_CONT request while a flow is active and flow->qentry is already set, smc_llc_flow_qentry_set() overwrites the pointer without freeing the previous allocation, leaking one kmalloc-96 object per spurious message. The sibling SMC_LLC_DELETE_LINK branch already has the correct !flow->qentry guard. Apply the same guard to the CONFIRM_LINK/ADD_LINK_CONT branch so that a duplicate message when qentry is already occupied falls through to break and is freed by the kfree(qentry) at the out: label, rather than silently leaking the existing allocation. The response direction (smc_llc_rx_response()) is unaffected: it already guards with flow->qentry at the equivalent site and drops duplicate responses correctly. | |||||
| CVE-2026-74718 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: devlink: fix net namespace reference leak in reload devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net with a held reference. When the requested namespace differs from the current one and the reload action is not DRIVER_REINIT, the function returns -EOPNOTSUPP without releasing the reference. Add the missing put_net() on this error path. | |||||
| CVE-2026-74716 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix locally exploitable BUG_ON in amdxdna_insert_pages() In amdxdna_insert_pages(), vm_flags_mod() sets VM_MIXEDMAP and clears VM_PFNMAP. If an unprivileged userspace process mmaps a non-imported GEM object and then calls madvise(MADV_DONTNEED), the PTEs will be successfully cleared because VM_MIXEDMAP allows this (unlike VM_PFNMAP). When userspace subsequently accesses the memory, drm_gem_shmem_fault() handles the page fault and attempts to map the backing shmem page via vmf_insert_pfn() which calls vmf_insert_pfn_prot(). Because the backing shmem page is normal system memory (pfn_valid(pfn) is true) and the VMA now has VM_MIXEDMAP set, won't this predictably trigger the explicit assertion BUG_ON((vma->vm_flags & VM_MIXEDMAP) && pfn_valid(pfn)) Fix by removing the vm_flags_mod() call and replacing the vm_insert_pages() pre-population with the handle_mm_fault() loop that was already used for the import (dma-buf) path. | |||||
| CVE-2026-74709 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: xsk: clear metadata pointer when no timestamp is requested User space can change metadata flags after request processing. Rereading them during completion can therefore make the kernel write a timestamp that was not requested when the packet was submitted. Clear the metadata pointer during request processing unless timestamp completion is requested. Completion handling can then use the pointer itself instead of rereading the flags. On the mlx5 multi-packet WQE path metadata is evaluated per batch: xsk_tx_metadata_request() runs only for the descriptor that starts a session, just like the checksum offload that is applied once through the shared WQE. Only that descriptor's pointer is reset, so completion handling can record a timestamp for the other descriptors of the session regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays inside the metadata area; the single-WQE, other zero-copy, and generic paths reset the pointer per descriptor and are unaffected. | |||||
| CVE-2026-74706 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bnge: Fix NULL pointer dereference in aux device release If allocation of auxr_dev fails during auxiliary device setup, the error path calls auxiliary_device_uninit(), which eventually invokes bnge_aux_dev_release(). The release callback unconditionally dereferences aux_priv->auxr_dev->pdev to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated on this failure path, the dereference results in a NULL pointer exception Retrieve the parent bnge_dev from the auxiliary device's parent instead of auxr_dev, and free auxr_dev only when it was successfully allocated. This allows the release callback to correctly clean up partially initialized auxiliary devices. | |||||
| CVE-2026-74699 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix memory leak in exec_queue_set_hang_replay_state() The q->replay_state is blindly overwritten, which can potentially leak memory that was previously allocated by vmemdup_user(). Return an error if q->replay_state is not empty. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e) | |||||
| CVE-2026-74698 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix BQL reset on SQ re-activation mlx5e_queue_start() deactivates and re-activates all channels but closes only the queue being restarted. mlx5e_activate_txqsq() then unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters of channels that kept their in-flight TX WQEs. The next completion then over-charges and trips the BUG_ON() in dql_completed(): kernel BUG at lib/dynamic_queue_limits.c:99! RIP: 0010:dql_completed+0x23d/0x280 Call Trace: <IRQ> mlx5e_poll_tx_cq+0x668/0xa60 mlx5e_napi_poll+0x5b/0x7b0 net_rx_action+0x15a/0x580 Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc). In the case that reset is skipped, the outstanding WQEs will eventually complete and rebalance the dql. The dql->limit is carried across the reset. | |||||
| CVE-2026-74694 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net/ncsi: fix heap OOB read in NCSI_CMD_SEND_CMD payload length ncsi_send_cmd_nl() takes the number of bytes to copy from the attacker-controlled ncsi_pkt_hdr.length field of the in-band packet header, while the source buffer is the NCSI_ATTR_DATA netlink attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr). The two length sources are never cross-checked: only nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced. With hdr->length set larger than the attribute payload (up to 65535 against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies past the end of the netlink attribute buffer with unsafe_memcpy(), leaking up to ~64KB of kernel heap memory into the transmitted NCSI command packet. The destination skb is sized by the declared payload, so the write side does not overflow - this is a pure OOB read / information leak, reachable with CAP_NET_ADMIN on systems with a registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where NET_NCSI=y is standard). Reject commands whose declared payload extends past the end of the data attribute. The issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. | |||||
| CVE-2026-74693 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: prestera: validate firmware header length prestera_fw_hdr_parse() reads the firmware header before checking that the firmware image contains that header. Reject images shorter than struct prestera_fw_header before decoding the magic and version fields. | |||||
| CVE-2026-74686 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: rqspinlock: Reset tail when preserving queue on deadlock Currently, the destruction of the waiter queue is suppressed for rqspinlock in cases where a deadlock is detected. Deadlock checks happen relatively frequently (on entry for AA, within 1ms for ABBA), and waiter threads may not be involved in locking scenarios involving deadlocks. Thus, it is useful to not flush the queue and let other waiters take a stab at acquiring the lock after we detect a deadlock and exit. However, we need to follow the same logic as what we did previously for the waitq_timeout label: reset the tail, and if we cannot, signal the next waiter appropriately. In case of deadlocks, this signal would just mark the MCS node as unlocked, and in case of timeouts, it would signal RES_TIMEOUT_VAL. The difference thus is in the value propagated, which decides whether the queue remains active or gets flushed. Not doing the tail reset, and waiting for the next waiter can lead to cases where we are the final waiter, and thus no next waiter arrives, leading to intermittent stalls in this path. Once the next waiter does join, we will be unblocked. In the theoretical case when the next waiter never joins, we risk stalling indefinitely. This can only happen for ABBA deadlocks, since entry into the wait queue is guarded with AA checks. A precise sequence of executions leading up to this scenario can be: CPU 0 holds lock A. CPU 1 holds lock B. CPU 2 attempts lock B, becomes the pending waiter for B. CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues. CPU 1 attempts lock A. CPU 0 detects an ABBA deadlock. Once deadlock detection happens for CPU 0, it will sit waiting for the next waiter in the queue to populate node->next, which will experience delays until such a waiter arrives. Fix this by adjusting the logic for the check for deadlocks preceding the waitq_timeout label. It would make sense to consolidate code for both cases and use 'ret' to distinguish the value being propagated, but that is left as an exercise for a future refactoring task to avoid diff noise in this patch. | |||||
| CVE-2026-74685 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Clamp negative current limits When a negative value is passed to ltc4282_write_curr(), the signed long val is cast directly to u64: drivers/hwmon/ltc4282.c:ltc4282_write_curr() { /* need to pass it in millivolt */ u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO); ... } This cast converts negative inputs into large positive values. The subsequent division result overflows the u32 in variable, truncating to a pseudo-random positive value. When this is passed to ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead of zero. Clamp val to 0 and to the maximum supported upper limit before the cast and assign the result to a 64-bit temporary variable before the division to avoid the underflow and an also possible overflow. | |||||
| CVE-2026-74682 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write on Type II inbound URBs data_ep_set_params() sizes each URB transfer buffer before it adds the Format Type II transfer delimiter: u->packets = urb_packs; u->buffer_size = maxsize * u->packets; if (fmt->fmt_type == UAC_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); buffer_size is computed from the pre-increment packet count and never recomputed, so for a Type II endpoint the buffer is one packet short of the packet count the URB is built with. prepare_inbound_urb() then lays out one iso frame per packet and never consults buffer_size: offs = 0; for (i = 0; i < urb_ctx->packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = ep->curpacksize; offs += ep->curpacksize; } urb->transfer_buffer_length = offs; urb->number_of_packets = urb_ctx->packets; The last descriptor therefore points one packet past the end of the transfer buffer, where the host controller writes device data on every inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound their fill loops by ctx->buffer_size, so only capture is affected. fmt_type comes from the device's audio streaming descriptors, so any device advertising a Type II capture format hits this once userspace sets hw_params on the stream. KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report per inbound transfer: BUG: KASAN: slab-out-of-bounds in dummy_timer Write of size 64 at addr ffff0000186171c0 by task cons02/166 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 166: usb_alloc_coherent snd_usb_endpoint_set_params The buggy address is located 0 bytes to the right of allocated 64-byte region [ffff000018617180, ffff0000186171c0) Compute buffer_size after the delimiter packet has been accounted for, and bound the fill loop by buffer_size, as prepare_silent_urb() already does on the outbound side. This grows every Type II URB allocation by one maxsize packet. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | |||||
| CVE-2026-74681 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT endpoint size. Both are taken independently from different endpoints in usbio_probe(), so the check is wrong when they differ. Use rxbuf_len for the IN direction. This matches the buffer that actually holds the response data. | |||||
| CVE-2026-74680 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm() If cxacru_cm() encounters an error while submitting or waiting for snd_urb, it aborts and returns the error without killing the already submitted rcv_urb. This leaves the rcv_urb active. When this happens during initialization (e.g., in cxacru_atm_start()), the driver may ignore the error and proceed to call cxacru_poll_status(), which invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb triggers a warning in usb_submit_urb(): cxacru 1-1:1.0: send of cm 0x84 failed (-104) ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104 ------------[ cut here ]------------ URB ffff88812658d200 submitted while active WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0 drivers/usb/core/urb.c:379 ... Call Trace: <TASK> cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631 cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline] cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828 cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814 usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927 usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178 cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370 ... To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts early. We can safely call usb_kill_urb() on rcv_urb in the error path, as it is safe to call even if the URB is not active (e.g., if it failed to submit in the first place, or if it already completed). | |||||
| CVE-2026-74679 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Use unsigned int for ndp_index The variable ndp_index is declared as a signed integer, but it stores the return value of get_ncm(), which is unsigned. A malicious host can supply a large offset that overflows the signed ndp_index, making it negative. Because ndp_index is compared against unsigned bounds, this negative value bypasses sanity checks and leads to an out-of-bounds read when calculating the address of the NDP block (ntb_ptr + ndp_index). Fix this by changing ndp_index to unsigned int to ensure consistent unsigned comparisons throughout the function. | |||||
| CVE-2026-74677 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: usb: ipheth: fix carrier_work UAF on disconnect ipheth_sndbulk_callback() re-arms the carrier-check work on any non-zero URB status: else schedule_delayed_work(&dev->carrier_work, 0); Nothing ties that to the interface being up, so the work can be armed again after ipheth_close() has already drained it, and stay armed until the netdev whose private area embeds it is freed. On unplug with a TX URB in flight, ipheth_disconnect() drains the work through unregister_netdev() -> ipheth_close() -> cancel_delayed_work_sync() and only then calls ipheth_kill_urbs(). usb_kill_urb() completes the in-flight TX URB with -ENOENT, so ipheth_sndbulk_callback() runs after the drain and re-arms carrier_work. The same completion also re-arms the work if the interface is only brought down while a TX URB is in flight, and ipheth_carrier_check_work() then keeps re-queueing itself once a second. unregister_netdev() does not call ipheth_close() for an already-down interface, so nothing drains it on the later unplug either. In both cases free_netdev() frees the netdev while carrier_work is still pending, and ipheth_carrier_check_work() dereferences freed memory. Tie the work to the interface state instead of chasing the completion: disable it in ipheth_close() and enable it in ipheth_open(), so a schedule_delayed_work() from the URB completion is a no-op whenever the interface is not up. disable_delayed_work_sync() also waits for a running instance, so it fully replaces the cancel_delayed_work_sync() it takes the place of. The work starts out disabled in ipheth_probe() so the enable/disable counts balance from the first open. Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and raw-gadget standing in for the device, driving the second path above (the interface is already down, so unregister_netdev() does not call ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in __run_timers(), freed by ipheth_disconnect() and re-armed from ipheth_sndbulk_callback() via queue_delayed_work_on(). The same trigger on a kernel differing only by this patch reports 0 of 15, and the carrier check still functions across open/close cycles. The reproducer needs an attached USB device that stops draining bulk OUT, plus a link down and unplug, driven as root. It is not a privilege boundary crossing and no exploit primitive was developed. Found by 0sec (https://0sec.ai). | |||||
| CVE-2026-74671 | 2026-08-22 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ima: fix out-of-bounds read in xattr_verify() The digest-length check in xattr_verify() mixes int and size_t: if (xattr_len - sizeof(xattr_value->type) - hash_start >= iint->ima_hash->length) sizeof() yields size_t, so the usual arithmetic conversions promote the whole left-hand side to unsigned 64-bit before the subtraction runs. For a truncated xattr this underflows instead of going negative: a 1-byte IMA_XATTR_DIGEST_NG xattr (xattr_len == 1, hash_start == 1) turns "1 - 1 - 1" into SIZE_MAX, which is trivially >= ima_hash->length. The check then passes and the following memcmp() reads iint->ima_hash->length bytes starting past the end of the buffer vfs_getxattr_alloc() allocated for it. Nothing upstream clamps xattr_len back into a safe range first: ima_get_hash_algo() only special-cases xattr_len < 2 to pick a default algorithm, and evm_verifyxattr() returns INTEGRITY_UNKNOWN rather than failing when no HMAC key is loaded, so a truncated security.ima value reaches the length check as-is. Rewrite the comparison so every operand stays a signed int and no implicit conversion to size_t can occur. | |||||