Total
395446 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-93186 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: cxl/mbox: Clamp mailbox output allocation to the payload size CXL_MEM_SEND_COMMAND bounds the user's in.size to the mailbox payload size but leaves out.size unbounded, then cxl_mbox_cmd_ctor() calls kvzalloc(out.size). A large out.size drives a huge allocation, above INT_MAX it WARNs and taints, and with panic_on_warn=1 it panics. The transport __cxl_pci_mbox_send_cmd() already clamps the response copy to min(out.size, payload_size, device len), so the output buffer is never written beyond payload_size. Clamp the allocation to payload_size too, matching the RAW path. | |||||
| CVE-2026-93185 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ASoC: rt700-sdw: always drain jack work on remove rt700_sdw_remove() drains jack_detect_work and jack_btn_check_work only when rt700->hw_init is true. That state bit is cleared by rt700_update_status() when the SoundWire slave becomes UNATTACHED, but a jack work item can already have been queued by rt700_interrupt_callback() or rt700_jack_init() while the device was initialized. Do not use hw_init as the remove-time guard for draining these work objects. The delayed works are initialized during rt700_init(), so remove can cancel them unconditionally and pair the object lifetime with the codec-private data lifetime instead of a mutable hardware state bit. This issue was found by our static analysis tool and then confirmed by manual review of the SoundWire status, interrupt and remove paths. The remove path should drain work based on whether the work object exists, not on a runtime hardware state bit that can change after the work was queued. A QEMU PoC queued jack_detect_work, simulated SDW_SLAVE_UNATTACHED, and then entered remove. DEBUG_OBJECTS reported an active timer/work object associated with the rt700 jack work path after remove skipped the cancel. This is sent as an RFC because the practical trigger depends on SoundWire core remove ordering after an UNATTACHED status update. If remove cannot run after hw_init has been cleared while jack work is still pending, this is a defensive lifecycle cleanup rather than a reachable race on current systems. | |||||
| CVE-2026-93184 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_audmix: rework runtime PM handling in probe After pm_runtime_enable() the AUDMIX block is powered off and stays suspended until the first runtime resume. Register writes issued between probe() and the first resume (e.g. from DAPM or ALSA control paths) target unpowered hardware and cause a system hang. Fix this by calling pm_runtime_resume_and_get() immediately after pm_runtime_enable() to power the hardware up and enable its clocks. Release the reference afterwards with pm_runtime_put() to allow the runtime PM framework to suspend the device and switch the regmap to cache-only mode when idle. When CONFIG_PM is disabled or runtime PM is not enabled, pm_runtime_* calls are stubs that do not power up the hardware. Handle this case explicitly by calling fsl_audmix_runtime_resume() directly so the hardware is always initialised and its clocks are enabled, ensuring register accesses succeed regardless of PM configuration. | |||||
| CVE-2026-93183 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/lima: call drm_mm_init() with a valid allocation range lima_vm_create() is currently run before va_start and va_end are set up, meaning they are both 0. lima_vm_create() runs drm_mm_init() with them as arguments for the allocator, and if DRM_DEBUG_MM is enabled the DRM_MM_BUG_ON check in drm_mm_init then fires, as seen here on exynos4412-odroid-u2: [ 1.736297] ------------[ cut here ]------------ [ 1.740370] kernel BUG at drivers/gpu/drm/drm_mm.c:931! [ 1.745574] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 1.750697] Modules linked in: [ 1.753734] CPU: 0 UID: 0 PID: 41 Comm: kworker/u16:1 Not tainted 7.0.10-postmarketos-exynos4 #11 PREEMPT [ 1.763372] Hardware name: Samsung Exynos (Flattened Device Tree) [ 1.769446] Workqueue: events_unbound deferred_probe_work_func [ 1.775261] PC is at drm_mm_init+0x9c/0xa4 [ 1.779339] LR is at lima_vm_create+0x144/0x17c [ ... ] Fix the issue by moving the lima_vm_create() call after va_start and va_end are set up. | |||||
| CVE-2026-93182 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix overflow in update_tg_cfs_runnable() A divide-by-zero crash is observed when running hackbench: [14697.488452] CPU: 112 UID: 0 PID: 124791 Comm: hackbench Not tainted 7.1.0-rc2+ [14697.492627] RIP: 0010:propagate_entity_load_avg+0x35f/0x3e0 [14697.506799] <TASK> [14697.507411] __dequeue_task+0x2b4/0xc70 [14697.508677] dequeue_task_fair+0x36/0x370 [14697.509047] dequeue_task+0x101/0x2f0 [14697.509426] __schedule+0x1b1/0x1a00 [14697.510868] anon_pipe_read+0x3da/0x450 [14697.511400] vfs_read+0x361/0x390 [14697.512053] __x64_sys_read+0x19/0x30 The divide-by-zero happens here: if (scale_load_down(gcfs_rq->load.weight)) { load_sum = div_u64(gcfs_rq->avg.load_sum, scale_load_down(gcfs_rq->load.weight)); } gcfs_rq->load.weight is an insane large value and is truncated to the lower 32 bits by div_u64, which happen to be 0. Using AI for investigation, the cause is a u32 overflow in update_tg_cfs_runnable(), and flat pickup became a victim when using tg_tasks(): u32 new_sum, divider; ... new_sum = se->avg.runnable_avg * divider; <-- boom The following sequence shows how this triggers the crash: propagate_entity_load_avg() update_tg_cfs_runnable() # u32 overflow corrupts runnable_sum __update_load_avg_cfs_rq() ___update_load_avg() # computes insane runnable_avg update_tg_load_avg() # propagates to tg->runnable_avg update_cfs_group() calc_concur_shares() tg_tasks() # long-to-int truncation, negative nr reweight_entity() # corrupted se->load.weight update_load_add() # corrupted cfs_rq->load.weight propagate_entity_load_avg() update_tg_cfs_load() div_u64() # divide-by-zero Fix by widening new_sum from u32 to u64 (no need to force tg_tasks() to return unsigned long after this fix) | |||||
| CVE-2026-93181 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix uncore_box ref/unref ordering In uncore_event_cpu_online(), uncore_box_ref() was called before uncore_change_context(). uncore_box_ref() gates on box->cpu >= 0, but box->cpu is still -1 at that point because uncore_change_context() has not run yet. As a result, the box is never initialized on the first CPU to come online in a die, leaving it permanently uninitialized in the single-CPU-per-die case. Thus, box->refcnt is one count below the true value, and in the CPU offline path, the box will be torn down on the second-to-last CPU. In uncore_event_cpu_offline(), uncore_box_unref() was called after uncore_change_context(), so box->cpu is already -1 when the collector CPU goes offline, which prevents it from tearing down the box. Fix by swapping the call order in both paths so that uncore_box_{ref,unref}() runs at the point where box->cpu reflects the correct context. Move allocate_boxes() out of uncore_box_ref() to enable this reordering. | |||||
| CVE-2026-93180 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix NPD issue on partial unmap of an evicted BO This commit fixes the NULL pointer dereference issue that would have happened on the split of GPU mapping due to partial unmap of an evicted BO. There is a logic to handle the partial unmap of huge pages when the GPU mapping is split. That logic was not being completely skipped for the VMA of an evicted BO and that resulted in a NPD possibility for the 'bo->backing.pages' pointer, which is set to NULL when pages of a BO are released on eviction. Following dump was seen when a partial unmap was exercised for an evicted BO. Unable to handle kernel paging request at virtual address 0000000000002000 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000008842e8000 [0000000000002000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP <snip> pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : iova_mapped_as_huge_page+0x20/0x68 [panthor] lr : panthor_gpuva_sm_step_remap+0x39c/0x498 [panthor] sp : ffff800086193920 x29: ffff800086193920 x28: ffff800086193a18 x27: ffff800086193b80 x26: 0000000000400000 x25: 0000000000810000 x24: 0000000000400000 x23: ffff000808af1800 x22: 0000000000a00000 x21: ffff800086193a00 x20: ffff000806fd3f00 x19: 0000000000410000 x18: 00000000ffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff800083ce2d83 x14: 0000000000000000 x13: 3120646574636976 x12: 6520303030303138 x11: 2d30303030313420 x10: ffff8000836e6c80 x9 : ffff80007bfc889c x8 : 3fffffffffffefff x7 : ffff8000836e6c80 x6 : 0000000000000000 x5 : ffff00097ef19088 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000010000 x1 : 0000000000000400 x0 : 0000000000000000 Call trace: iova_mapped_as_huge_page+0x20/0x68 [panthor] (P) op_remap_cb.isra.0+0x70/0xb0 __drm_gpuvm_sm_unmap+0xf8/0x1c0 drm_gpuvm_sm_unmap+0x40/0x60 panthor_vm_exec_op+0xa0/0x168 [panthor] panthor_vm_bind_exec_sync_op+0x8c/0xb8 [panthor] panthor_ioctl_vm_bind+0xbc/0x170 [panthor] drm_ioctl_kernel+0xc0/0x140 drm_ioctl+0x20c/0x500 __arm64_sys_ioctl+0xb4/0x118 invoke_syscall+0x5c/0x120 el0_svc_common.constprop.0+0x48/0xf8 do_el0_svc+0x28/0x40 el0_svc+0x38/0x128 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x198/0x1a0 Code: 8b030021 cb020021 f940b800 d34cfc21 (f8617801) ---[ end trace 0000000000000000 ]--- v2: Fix indentation | |||||
| CVE-2026-93179 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read Reject voltage objects whose usSize is smaller than the header or would advance the cursor past the table end, preventing an infinite loop or heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table. | |||||
| CVE-2026-93174 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: Copy per-CPU map value padding in copy_map_value_long() In kernel, per-CPU map elements are stored with round_up(map->value_size, 8) bytes. On UAPI lookup paths, it copies the rounded size for each CPU into a temporary buffer. However, copy_map_value_long() passes 'map->value_size' to bpf_obj_memcpy(). When the map has special fields, bpf_obj_memcpy() copies around those fields with memcpy(), and does not copy the tail padding between 'map->value_size' and round_up(map->value_size, 8). The temporary UAPI lookup buffers are allocated without __GFP_ZERO. As a result, when the per-CPU map's value size is not equal to round_up(map->value_size, 8), UAPI LOOKUP_ELEM and its variants can return stale heap contents from that padding to user space. The same issue applies to bpf_iter for per-CPU maps. Pass round_up(map->value_size, 8) to bpf_obj_memcpy() from copy_map_value_long(), so per-CPU maps both with and without special fields copy the entire per-CPU slot. Remove the now redundant round_up() from bpf_obj_memcpy()'s long_memcpy path. | |||||
| CVE-2026-93173 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf,lsm: Drop bpf_prog_free from sleepable_lsm_hooks __bpf_prog_put_rcu() is the call_rcu() callback for non-sleepable programs. security_bpf_prog_free() called from there fires bpf_prog_free in softirq; if a sleepable LSM prog is attached to that hook, might_fault() BUGs: BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 5038 preempt_count: 101, expected: 0 Call Trace: <IRQ> __bpf_prog_enter_sleepable+0x1cd/0x320 kernel/bpf/trampoline.c:1255 bpf_trampoline_6442549705+0x53/0xd7 security_bpf_prog_free+0xde/0x130 security/security.c:5465 __bpf_prog_put_rcu+0xab/0xd0 kernel/bpf/syscall.c:2365 rcu_do_batch kernel/rcu/tree.c:2617 [inline] handle_softirqs+0x236/0x800 kernel/softirq.c:622 </IRQ> The call_rcu/call_rcu_tasks_trace split reflects the freed program's sleepability, not that of any attached observer. security_bpf_prog_free() also frees prog->aux->security, which has to stay after the grace period, so drop bpf_prog_free from sleepable_lsm_hooks rather than move the call. Non-sleepable observers still run there. | |||||
| CVE-2026-93172 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug We miss a failed allocation check for pgdat->per_cpu_nodestats, which results in a NULL deref when we offset into the per-cpu area. Propagate -ENOMEM up the stack and leave per_cpu_nodestats pointing at boot_nodestats so a later online can retry the allocation. hotadd_init_pgdat() returns NULL on failure, which __try_online_node() already maps to -ENOMEM. On failure nothing needs to be unwound: - the node is never marked online - per_cpu_nodestats is left pointing at boot_nodestats - __add_memory_resource() cleans up pending memblock resources - later online attempts retry the per_cpu_nodestats allocation | |||||
| CVE-2026-93171 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: leds: lp5860: Fix a potential double-unlock In lp5860_device_init(), if lp5860_init_dt() fails, an already unlocked mutex is unlocked another time. Slightly rework how the lock is taken/released to avoid this potential double unlock. | |||||
| CVE-2026-93169 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: zynqmp_dma: fix race between runtime PM and device removal In zynqmp_dma_remove(), runtime PM was disabled only after checking state and doing a manual suspend. This can race with runtime PM in the remove/unbind (rmmod) path. Disable runtime PM first, then suspend only if the device is not already suspended. To prevent any further runtime PM transitions. | |||||
| CVE-2026-93168 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a condition that is never fulfilled, the CPU busy-waits for prolonged time and the timeout triggers only with a massive delay causing a CPU stall. This happens due to a huge underestimation of wall clock time in poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use timekeeping in read_poll_timeout_atomic()") changed the behavior to no longer use ktime_get at the expense of underestimation of wall clock time which appears to be very large for delay_us=0. Instead of timing out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for loop in poll_timeout_us_atomic takes) which is in the range of several minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero value for delay_us. Use delay_us=10 to keep the delay in the hot path of starting DMA transfers minimal but still avoid CPU stalls in case of unexpected hardware failures. One-off measurement with delay_us=0 causes the cpu to busy wait around 7 minutes in the timeout case. After applying this patch with delay_us=10 the measured timeout was 1053428 microseconds which is roughly equivalent to the expected 1000000 microseconds specified in XILINX_DMA_LOOP_COUNT. Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value. | |||||
| CVE-2026-93167 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: csky: Fix a4/a5 restoration in syscall trace path The syscall trace path reloads syscall arguments from pt_regs before calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall arguments are prepared as stack arguments before invoking syscallid. The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since those offsets are relative to the original pt_regs base, loading them after changing sp fetches the wrong slots. As a result, traced syscalls that use the 5th or 6th argument may receive corrupted arguments. This is visible with mmap2(), which takes six arguments. A small PTRACE_SYSCALL reproducer opens a file and maps one page with: mmap(NULL, 4096, PROT_READ | PROT_EXEC, MAP_PRIVATE, fd, 0) Before the fix, the traced child fails the mmap and exits with 12. After the fix, the mapping succeeds and the child exits with 0. Fix the trace path by loading a4/a5 from pt_regs before changing sp. Tested on: ck860f, linux-4.19.15, C-SKY abiv2 | |||||
| CVE-2026-93166 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: debug: fix off by on in rtw89_ppdu_str() This > comparison should be >= to avoid an out of bounds access. | |||||
| CVE-2026-93164 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Move optimized uprobe from nop5 to nop10 Andrii reported an issue with optimized uprobes [1] that can clobber redzone area with call instruction storing return address on stack where user code may keep temporary data without adjusting rsp. Fixing this by moving the optimized uprobes on top of 10-bytes nop instruction, so we can squeeze another instruction to escape the redzone area before doing the call, like: lea -0x80(%rsp), %rsp call tramp Note the lea instruction is used to adjust the rsp register without changing the flags. We use nop10 and following transformation to optimized instructions above and back as suggested by Peterz [2]. Optimize path (int3_update_optimize): 1) Initial state after set_swbp() installed the uprobe: cc 2e 0f 1f 84 00 00 00 00 00 From offset 0 this is INT3 followed by the tail of the original 10-byte NOP. After a previous unoptimization bytes 5..9 may still contain the old call instruction, which remains valid for threads already there. 2) Rewrite the LEA tail and call displacement: cc [8d 64 24 80 e8 d0 d1 d2 d3] From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not executable entry points while byte 0 is trapped. 3) Publish the first LEA byte: [48] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this is: lea -0x80(%rsp), %rsp call <uprobe-trampoline> Unoptimize path (int3_update_unoptimize): 1) Initial optimized state: 48 8d 64 24 80 e8 d0 d1 d2 d3 Same as 3) above. 2) Trap new entries before restoring the NOP bytes: [cc] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this traps. A thread that had already executed the LEA can still reach the intact CALL at offset 5. 3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped and byte 5 as CALL. cc [2e 0f 1f 84] e8 d0 d1 d2 d3 From offset 0 this still traps. Offset 5 is still the CALL for any thread that was already past the first LEA byte. 4) Publish the first byte of the original NOP: [66] 2e 0f 1f 84 e8 d0 d1 d2 d3 From offset 0 this is the restored 10-byte NOP; the CALL opcode and displacement are now only NOP operands. Offset 5 still decodes as CALL for a thread that was already there. Tthere is only a single target uprobe-trampoline for the given nop10 instruction address, so the CALL instruction will not be changed across unoptimization/optimization cycles. Therefore, any task that is preempted at the CALL instruction is guaranteed to observe that CALL and not anything else. Note as explained in [2] we need to use following nop10: PF1 PF2 ESC NOPL MOD SIB DISP32 NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1) which means we need to allow 0x2e prefix which maps to INAT_PFX_CS attribute in is_prefix_bad function. Also changing the uprobe syscall error when called out of uprobe trampoline to -EPROTO, so we are able to detect the fixed kernel. The optimized uprobe performance stays the same: uprobe-nop : 3.129 ± 0.013M/s uprobe-push : 3.045 ± 0.006M/s uprobe-ret : 1.095 ± 0.004M/s --> uprobe-nop10 : 7.170 ± 0.020M/s uretprobe-nop : 2.143 ± 0.021M/s uretprobe-push : 2.090 ± 0.000M/s uretprobe-ret : 0.942 ± 0.000M/s --> uretprobe-nop10: 3.381 ± 0.003M/s usdt-nop : 3.245 ± 0.004M/s --> usdt-nop10 : 7.256 ± 0.023M/s [1] https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/ [2] https://lore.kernel.org/bpf/20260518104306.GU3102624@noisy.programming.kicks-ass.net/#t | |||||
| CVE-2026-93163 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: hwrng: core - fix rng list on registration error hwrng_register(rng) does the following: 1. Checks if rng has name and read methods set 2. Checks if the name already exists 3. Adds rng to global rng_list 4. May try to set rng to current_rng If step 4 fails, it returns an error. However, it does not remove the rng from rng_list, causing a dangling reference which can result in use-after-free if the caller frees rng, since registration failed. Add a list_del_init() cleanup step. | |||||
| CVE-2026-93162 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - cancel work on re-enable SR-IOV timeout The QAT reset worker queues SR-IOV reenable work using a work_struct and completion embedded in an on-stack adf_sriov_dev_data. If the completion wait times out, the reset worker can return while device_sriov_wq still holds or executes the stack-backed work item. Cancel the work on the device_sriov_wq on timeout before the stack frame unwinds. | |||||
| CVE-2026-93161 | 2026-09-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - clear AES key schedule from stack qat_alg_xts_reverse_key() expands the forward XTS AES key on the stack. That schedule contains key material and can remain in the stack frame. Clear the temporary crypto_aes_ctx with memzero_explicit() after the copy. | |||||