Filtered by vendor Linux
Subscribe
Total
19344 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-50227 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Initialize Xen timer only once Add a check for existing xen timers before initializing a new one. Currently kvm_xen_init_timer() is called on every KVM_XEN_VCPU_ATTR_TYPE_TIMER, which is causing the following ODEBUG crash when vcpu->arch.xen.timer is already set. ODEBUG: init active (active state 0) object type: hrtimer hint: xen_timer_callbac0 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:502 Call Trace: __debug_object_init debug_hrtimer_init debug_init hrtimer_init kvm_xen_init_timer kvm_xen_vcpu_set_attr kvm_arch_vcpu_ioctl kvm_vcpu_ioctl vfs_ioctl | |||||
| CVE-2022-50221 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: Fix out-of-bounds access Clip memory range to screen-buffer size to avoid out-of-bounds access in fbdev deferred I/O's damage handling. Fbdev's deferred I/O can only track pages. From the range of pages, the damage handler computes the clipping rectangle for the display update. If the fbdev screen buffer ends near the beginning of a page, that page could contain more scanlines. The damage handler would then track these non-existing scanlines as dirty and provoke an out-of-bounds access during the screen update. Hence, clip the maximum memory range to the size of the screen buffer. While at it, rename the variables min/max to min_off/max_off in drm_fb_helper_deferred_io(). This avoids confusion with the macros of the same name. | |||||
| CVE-2022-50219 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix KASAN use-after-free Read in compute_effective_progs Syzbot found a Use After Free bug in compute_effective_progs(). The reproducer creates a number of BPF links, and causes a fault injected alloc to fail, while calling bpf_link_detach on them. Link detach triggers the link to be freed by bpf_link_free(), which calls __cgroup_bpf_detach() and update_effective_progs(). If the memory allocation in this function fails, the function restores the pointer to the bpf_cgroup_link on the cgroup list, but the memory gets freed just after it returns. After this, every subsequent call to update_effective_progs() causes this already deallocated pointer to be dereferenced in prog_list_length(), and triggers KASAN UAF error. To fix this issue don't preserve the pointer to the prog or link in the list, but remove it and replace it with a dummy prog without shrinking the table. The subsequent call to __cgroup_bpf_detach() or __cgroup_bpf_detach() will correct it. | |||||
| CVE-2022-50215 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Allow waiting for commands to complete on removed device When a SCSI device is removed while in active use, currently sg will immediately return -ENODEV on any attempt to wait for active commands that were sent before the removal. This is problematic for commands that use SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel when userspace frees or reuses it after getting ENODEV, leading to corrupted userspace memory (in the case of READ-type commands) or corrupted data being sent to the device (in the case of WRITE-type commands). This has been seen in practice when logging out of a iscsi_tcp session, where the iSCSI driver may still be processing commands after the device has been marked for removal. Change the policy to allow userspace to wait for active sg commands even when the device is being removed. Return -ENODEV only when there are no more responses to read. | |||||
| CVE-2022-50213 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not allow SET_ID to refer to another table When doing lookups for sets on the same batch by using its ID, a set from a different table can be used. Then, when the table is removed, a reference to the set may be kept after the set is freed, leading to a potential use-after-free. When looking for sets by ID, use the table that was used for the lookup by name, and only return sets belonging to that same table. This fixes CVE-2022-2586, also reported as ZDI-CAN-17470. | |||||
| CVE-2022-50212 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not allow CHAIN_ID to refer to another table When doing lookups for chains on the same batch by using its ID, a chain from a different table can be used. If a rule is added to a table but refers to a chain in a different table, it will be linked to the chain in table2, but would have expressions referring to objects in table1. Then, when table1 is removed, the rule will not be removed as its linked to a chain in table2. When expressions in the rule are processed or removed, that will lead to a use-after-free. When looking for chains by ID, use the table that was used for the lookup by name, and only return chains belonging to that same table. | |||||
| CVE-2022-50200 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: selinux: Add boundary check in put_entry() Just like next_entry(), boundary check is necessary to prevent memory out-of-bound access. | |||||
| CVE-2022-50182 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Align upwards buffer size The hardware can support any image size WxH, with arbitrary W (image width) and H (image height) dimensions. Align upwards buffer size for both encoder and decoder. and leave the picture resolution unchanged. For decoder, the risk of memory out of bounds can be avoided. For both encoder and decoder, the driver will lift the limitation of resolution alignment. For example, the decoder can support jpeg whose resolution is 227x149 the encoder can support nv12 1080P, won't change it to 1920x1072. | |||||
| CVE-2022-50171 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - don't sleep when in softirq When kunpeng920 encryption driver is used to deencrypt and decrypt packets during the softirq, it is not allowed to use mutex lock. The kernel will report the following error: BUG: scheduling while atomic: swapper/57/0/0x00000300 Call trace: dump_backtrace+0x0/0x1e4 show_stack+0x20/0x2c dump_stack+0xd8/0x140 __schedule_bug+0x68/0x80 __schedule+0x728/0x840 schedule+0x50/0xe0 schedule_preempt_disabled+0x18/0x24 __mutex_lock.constprop.0+0x594/0x5dc __mutex_lock_slowpath+0x1c/0x30 mutex_lock+0x50/0x60 sec_request_init+0x8c/0x1a0 [hisi_sec2] sec_process+0x28/0x1ac [hisi_sec2] sec_skcipher_crypto+0xf4/0x1d4 [hisi_sec2] sec_skcipher_encrypt+0x1c/0x30 [hisi_sec2] crypto_skcipher_encrypt+0x2c/0x40 crypto_authenc_encrypt+0xc8/0xfc [authenc] crypto_aead_encrypt+0x2c/0x40 echainiv_encrypt+0x144/0x1a0 [echainiv] crypto_aead_encrypt+0x2c/0x40 esp_output_tail+0x348/0x5c0 [esp4] esp_output+0x120/0x19c [esp4] xfrm_output_one+0x25c/0x4d4 xfrm_output_resume+0x6c/0x1fc xfrm_output+0xac/0x3c0 xfrm4_output+0x64/0x130 ip_build_and_send_pkt+0x158/0x20c tcp_v4_send_synack+0xdc/0x1f0 tcp_conn_request+0x7d0/0x994 tcp_v4_conn_request+0x58/0x6c tcp_v6_conn_request+0xf0/0x100 tcp_rcv_state_process+0x1cc/0xd60 tcp_v4_do_rcv+0x10c/0x250 tcp_v4_rcv+0xfc4/0x10a4 ip_protocol_deliver_rcu+0xf4/0x200 ip_local_deliver_finish+0x58/0x70 ip_local_deliver+0x68/0x120 ip_sublist_rcv_finish+0x70/0x94 ip_list_rcv_finish.constprop.0+0x17c/0x1d0 ip_sublist_rcv+0x40/0xb0 ip_list_rcv+0x140/0x1dc __netif_receive_skb_list_core+0x154/0x28c __netif_receive_skb_list+0x120/0x1a0 netif_receive_skb_list_internal+0xe4/0x1f0 napi_complete_done+0x70/0x1f0 gro_cell_poll+0x9c/0xb0 napi_poll+0xcc/0x264 net_rx_action+0xd4/0x21c __do_softirq+0x130/0x358 irq_exit+0x11c/0x13c __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x78/0x2c0 el1_irq+0xb8/0x140 arch_cpu_idle+0x18/0x40 default_idle_call+0x5c/0x1c0 cpuidle_idle_call+0x174/0x1b0 do_idle+0xc8/0x160 cpu_startup_entry+0x30/0x11c secondary_start_kernel+0x158/0x1e4 softirq: huh, entered softirq 3 NET_RX 0000000093774ee4 with preempt_count 00000100, exited with fffffe00? | |||||
| CVE-2022-50168 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf, x86: fix freeing of not-finalized bpf_prog_pack syzbot reported a few issues with bpf_prog_pack [1], [2]. This only happens with multiple subprogs. In jit_subprogs(), we first call bpf_int_jit_compile() on each sub program. And then, we call it on each sub program again. jit_data is not freed in the first call of bpf_int_jit_compile(). Similarly we don't call bpf_jit_binary_pack_finalize() in the first call of bpf_int_jit_compile(). If bpf_int_jit_compile() failed for one sub program, we will call bpf_jit_binary_pack_finalize() for this sub program. However, we don't have a chance to call it for other sub programs. Then we will hit "goto out_free" in jit_subprogs(), and call bpf_jit_free on some subprograms that haven't got bpf_jit_binary_pack_finalize() yet. At this point, bpf_jit_binary_pack_free() is called and the whole 2MB page is freed erroneously. Fix this with a custom bpf_jit_free() for x86_64, which calls bpf_jit_binary_pack_finalize() if necessary. Also, with custom bpf_jit_free(), bpf_prog_aux->use_bpf_prog_pack is not needed any more, remove it. [1] https://syzkaller.appspot.com/bug?extid=2f649ec6d2eea1495a8f [2] https://syzkaller.appspot.com/bug?extid=87f65c75f4a72db05445 | |||||
| CVE-2022-50167 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix potential 32-bit overflow when accessing ARRAY map element If BPF array map is bigger than 4GB, element pointer calculation can overflow because both index and elem_size are u32. Fix this everywhere by forcing 64-bit multiplication. Extract this formula into separate small helper and use it consistently in various places. Speculative-preventing formula utilizing index_mask trick is left as is, but explicit u64 casts are added in both places. | |||||
| CVE-2022-50164 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue After successfull station association, if station queues are disabled for some reason, the related lists are not emptied. So if some new element is added to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old one and produce a BUG like this: [ 46.535263] list_add corruption. prev->next should be next (ffff94c1c318a360), but was 0000000000000000. (prev=ffff94c1d02d3388). [ 46.535283] ------------[ cut here ]------------ [ 46.535284] kernel BUG at lib/list_debug.c:26! [ 46.535290] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 46.585304] CPU: 0 PID: 623 Comm: wpa_supplicant Not tainted 5.19.0-rc3+ #1 [ 46.592380] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012 [ 46.600336] RIP: 0010:__list_add_valid.cold+0x3d/0x3f [ 46.605475] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 c8 40 67 93 e8 20 cc fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 70 40 67 93 e8 09 cc fd ff <0f> 0b 48 89 fe 48 c7 c7 00 41 67 93 e8 f8 cb fd ff 0f 0b 48 89 d1 [ 46.624469] RSP: 0018:ffffb20800ab76d8 EFLAGS: 00010286 [ 46.629854] RAX: 0000000000000075 RBX: ffff94c1c318a0e0 RCX: 0000000000000000 [ 46.637105] RDX: 0000000000000201 RSI: ffffffff9365e100 RDI: 00000000ffffffff [ 46.644356] RBP: ffff94c1c5f43370 R08: 0000000000000075 R09: 3064316334396666 [ 46.651607] R10: 3364323064316334 R11: 39666666663d7665 R12: ffff94c1c5f43388 [ 46.658857] R13: ffff94c1d02d3388 R14: ffff94c1c318a360 R15: ffff94c1cf2289c0 [ 46.666108] FS: 00007f65634ff7c0(0000) GS:ffff94c1da200000(0000) knlGS:0000000000000000 [ 46.674331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.680170] CR2: 00007f7dfe984460 CR3: 000000010e894003 CR4: 00000000000606f0 [ 46.687422] Call Trace: [ 46.689906] <TASK> [ 46.691950] iwl_mvm_mac_wake_tx_queue+0xec/0x15c [iwlmvm] [ 46.697601] ieee80211_queue_skb+0x4b3/0x720 [mac80211] [ 46.702973] ? sta_info_get+0x46/0x60 [mac80211] [ 46.707703] ieee80211_tx+0xad/0x110 [mac80211] [ 46.712355] __ieee80211_tx_skb_tid_band+0x71/0x90 [mac80211] ... In order to avoid this problem, we must also remove the related lists when station queues are disabled. | |||||
| CVE-2022-50156 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: cp2112: prevent a buffer overflow in cp2112_xfer() Smatch warnings: drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy() 'data->block[1]' too small (33 vs 255) drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy() 'buf' too small (64 vs 255) The 'read_length' variable is provided by 'data->block[0]' which comes from user and it(read_length) can take a value between 0-255. Add an upper bound to 'read_length' variable to prevent a buffer overflow in memcpy(). | |||||
| CVE-2022-50145 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: sf-pdma: Add multithread support for a DMA channel When we get a DMA channel and try to use it in multiple threads it will cause oops and hanging the system. % echo 64 > /sys/module/dmatest/parameters/threads_per_chan % echo 10000 > /sys/module/dmatest/parameters/iterations % echo 1 > /sys/module/dmatest/parameters/run [ 89.480664] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 89.488725] Oops [#1] [ 89.494708] CPU: 2 PID: 1008 Comm: dma0chan0-copy0 Not tainted 5.17.0-rc5 [ 89.509385] epc : vchan_find_desc+0x32/0x46 [ 89.513553] ra : sf_pdma_tx_status+0xca/0xd6 This happens because of data race. Each thread rewrite channels's descriptor as soon as device_prep_dma_memcpy() is called. It leads to the situation when the driver thinks that it uses right descriptor that actually is freed or substituted for other one. With current fixes a descriptor changes its value only when it has been used. A new descriptor is acquired from vc->desc_issued queue that is already filled with descriptors that are ready to be sent. Threads have no direct access to DMA channel descriptor. Now it is just possible to queue a descriptor for further processing. | |||||
| CVE-2022-50137 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix a window for use-after-free During a destroy CQ an interrupt may cause processing of a CQE after CQ resources are freed by irdma_cq_free_rsrc(). Fix this by moving the call to irdma_cq_free_rsrc() after the irdma_sc_cleanup_ceqes(), which is called under the cq_lock. | |||||
| CVE-2022-50136 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY in this case. This may trigger a call trace in iw_cm. A simple way to trigger this: server: ib_send_lat client: ib_send_lat -R <server_ip> The call trace looks like this: kernel BUG at drivers/infiniband/core/iwcm.c:894! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <...> Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: <TASK> cm_work_handler+0x1dd/0x370 [iw_cm] process_one_work+0x1e2/0x3b0 worker_thread+0x49/0x2e0 ? rescuer_thread+0x370/0x370 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> | |||||
| CVE-2022-50131 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: prevent a buffer overflow in mcp_smbus_write() Smatch Warning: drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() '&mcp->txbuf[5]' too small (59 vs 255) drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() 'buf' too small (34 vs 255) The 'len' variable can take a value between 0-255 as it can come from data->block[0] and it is user data. So add an bound check to prevent a buffer overflow in memcpy(). | |||||
| CVE-2022-50129 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix a use-after-free Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt] Read of size 8 at addr ffff888141cc34b8 by task check/5093 Call Trace: <TASK> show_stack+0x4e/0x53 dump_stack_lvl+0x51/0x66 print_address_description.constprop.0.cold+0xea/0x41e print_report.cold+0x90/0x205 kasan_report+0xb9/0xf0 __asan_load8+0x69/0x90 srpt_enable_tpg+0x31/0x70 [ib_srpt] target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod] configfs_write_iter+0x18b/0x210 new_sync_write+0x1f2/0x2f0 vfs_write+0x3e3/0x540 ksys_write+0xbb/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> | |||||
| CVE-2022-50101 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: video: fbdev: vt8623fb: Check the size of screen before memset_io() In the function vt8623fb_set_par(), the value of 'screen_size' is calculated by the user input. If the user provides the improper value, the value of 'screen_size' may larger than 'info->screen_size', which may cause the following bug: [ 583.339036] BUG: unable to handle page fault for address: ffffc90005000000 [ 583.339049] #PF: supervisor write access in kernel mode [ 583.339052] #PF: error_code(0x0002) - not-present page [ 583.339074] RIP: 0010:memset_orig+0x33/0xb0 [ 583.339110] Call Trace: [ 583.339118] vt8623fb_set_par+0x11cd/0x21e0 [ 583.339146] fb_set_var+0x604/0xeb0 [ 583.339181] do_fb_ioctl+0x234/0x670 [ 583.339209] fb_ioctl+0xdd/0x130 Fix the this by checking the value of 'screen_size' before memset_io(). | |||||
| CVE-2022-50099 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: video: fbdev: arkfb: Check the size of screen before memset_io() In the function arkfb_set_par(), the value of 'screen_size' is calculated by the user input. If the user provides the improper value, the value of 'screen_size' may larger than 'info->screen_size', which may cause the following bug: [ 659.399066] BUG: unable to handle page fault for address: ffffc90003000000 [ 659.399077] #PF: supervisor write access in kernel mode [ 659.399079] #PF: error_code(0x0002) - not-present page [ 659.399094] RIP: 0010:memset_orig+0x33/0xb0 [ 659.399116] Call Trace: [ 659.399122] arkfb_set_par+0x143f/0x24c0 [ 659.399130] fb_set_var+0x604/0xeb0 [ 659.399161] do_fb_ioctl+0x234/0x670 [ 659.399189] fb_ioctl+0xdd/0x130 Fix the this by checking the value of 'screen_size' before memset_io(). | |||||