Total
398446 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-12630 | 2026-08-26 | N/A | 4.3 MEDIUM | ||
| Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table. The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction. The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. | |||||
| CVE-2026-13343 | 2026-08-26 | N/A | 5.3 MEDIUM | ||
| The UMP Stream responder library in lib/midi2/ump_stream_responder.c builds reply packets in a 16-byte struct midi_ump (uint32_t data[4]). The builders make_endpoint_info() and make_function_block_info() populate only the first two words (res.data[0] and res.data[1]) and, before this fix, declared their result as an uninitialised local (struct midi_ump res;). The remaining two words (res.data[2], res.data[3]) retain stale stack contents. Endpoint Info and Function Block Info notifications are UMP Stream messages (UMP_MT_UMP_STREAM), which are 4 words long, so the full 16-byte packet — including the two uninitialised words — is transmitted verbatim by cfg->send(). The responder is driven by attacker-supplied UMP Stream Endpoint-Discovery / Function-Block-Discovery requests via ump_stream_respond(). In the in-tree Network MIDI 2.0 server (subsys/net/lib/midi2/netmidi2.c) these requests arrive as UDP datagrams and, with the default no-authentication endpoint, a remote peer can establish a session and trigger the responses; the same library also serves USB MIDI 2.0 hosts. Each discovery request causes the device to disclose 8 bytes of its own uninitialised stack memory to the peer, and the request is freely repeatable. This is a confidentiality-only information leak (root cause is use of an uninitialised variable, CWE-457/CWE-908); the leaked words could include residual data or pointer values. There is no memory-corruption, integrity, or availability impact. The fix zero-initialises both result structs (struct midi_ump res = {0};), so the trailing words are cleared before transmission. These are the only two responder builders that left trailing words unset (send_string() already zeroes its buffer), so the leak is fully closed. | |||||
| CVE-2026-12366 | 2026-08-26 | N/A | 8.8 HIGH | ||
| Zephyr's dynamic kernel-object disposal path unref_check() in kernel/userspace/userspace.c frees an object's storage (k_free(dyn->data)) once its reference count reaches zero, after running a per-object-type cleanup. The cleanup switch handled only K_OBJ_MSGQ and K_OBJ_STACK; there was no K_OBJ_TIMER case. A dynamically-allocated, initialized, and armed k_timer keeps its embedded struct _timeout dnode linked in the global timeout queue (_timeout_q), so freeing the timer storage without cancelling the timeout leaves a dangling node in that queue. When the timer next expires, the timeout machinery walks _timeout_q and invokes z_timer_expiration_handler() on the freed node, dereferencing and writing freed (and reusable) kernel heap in kernel/ISR context. This is a deterministic use-after-free that does not depend on SMP: the queued node is simply never unlinked at free time. The disposal is reachable from an unprivileged user thread under CONFIG_USERSPACE + CONFIG_DYNAMIC_OBJECTS: a thread that holds the last permission on such a timer drops it via the k_object_release() syscall (or by exiting, through k_thread_perms_all_clear()), and can arm the timer itself via the k_timer_start() syscall. The free and the expiration handler run at kernel privilege while the actor is a user thread, so the bug is a sandbox-escape memory-corruption primitive usable for privilege escalation. The fix adds k_timer_cleanup() (cancel the timeout and wait for any in-flight handler) and calls it for K_OBJ_TIMER before freeing. | |||||
| CVE-2026-13216 | 2026-08-26 | N/A | 6.1 MEDIUM | ||
| The virtio PCI driver (drivers/virtio/virtio_pci.c) parses a device's PCI capability list during driver initialization. In virtio_pci_read_cap() the device-supplied capability length byte cap_len (read from PCI config space via pcie_conf_read()) was only checked with assert(tmp.cap_len == cap_struct_size). That assert resolves to __ASSERT_NO_MSG(), gated by CONFIG_ASSERT, which defaults off in production builds, so the value reached the copy logic completely unvalidated. The length then drives a loop that copies extra capability dwords into a fixed-size stack buffer supplied by the caller. A cap_len below the 24-byte base struct virtio_pci_cap underflows the unsigned extra_data_words count to a near-SIZE_MAX value, producing an effectively unbounded stack write; a cap_len above the caller's buffer (up to 255) writes up to roughly 228 bytes of device-controlled data past the buffer. Both are out-of-bounds writes of attacker-controlled content executed in kernel mode during boot-time device probe. The input originates from the virtio device. In the common deployment where Zephyr runs as a guest under a hypervisor, the device backend is the host, which already fully outranks the guest, so the bug yields no privilege escalation. The exploitable case is a virtio device that is untrusted relative to the Zephyr kernel — an untrusted or physical/passthrough virtio PCIe device on a bare-metal system, or a confidential-computing posture where the guest must defend against the host — where a malicious device can corrupt the kernel stack and potentially achieve code execution or a crash. The fix replaces the compiled-out assert with a runtime range check rejecting cap_len outside [sizeof(struct virtio_pci_cap), cap_struct_size] before any arithmetic or copy. | |||||
| CVE-2026-9771 | 2026-08-26 | N/A | 8.8 HIGH | ||
| The flash_copy() system call is verified by z_vrfy_flash_copy() in drivers/flash/flash_util.c. On builds with CONFIG_USERSPACE enabled, this handler is the kernel-side trust boundary for a user-mode caller. Prior to the fix it validated only the output buffer (K_SYSCALL_MEMORY_WRITE) and passed the two struct device * arguments, src_dev and dst_dev, directly into the implementation without any object validation — unlike every sibling flash syscall, which guards its device pointer with K_SYSCALL_DRIVER_FLASH. A user-mode thread fully controls the values of src_dev/dst_dev and the contents of its own address space. The implementation z_impl_flash_copy() dereferences these pointers and calls through their driver-API function tables (e.g. api->get_parameters(dst_dev), flash_read(src_dev, ...), flash_write(dst_dev, ...)). By supplying a pointer to a forged struct device whose api table contains attacker-chosen function pointers, an unprivileged thread can cause the kernel to call arbitrary code in supervisor mode; passing any arbitrary or invalid address otherwise yields a kernel crash or out-of-bounds read. The result is a local privilege escalation out of the userspace sandbox (with kernel denial-of-service and information disclosure as lesser outcomes). The fix adds K_SYSCALL_DRIVER_FLASH(src_dev, read) and K_SYSCALL_DRIVER_FLASH(dst_dev, write) to z_vrfy_flash_copy(), which verify each device is a registered flash-driver kernel object the calling thread is permitted to use before any dereference, closing the path completely. | |||||
| CVE-2026-13212 | 2026-08-26 | N/A | 8.8 HIGH | ||
| The Zephyr virtio driver does not validate the descriptor-chain head id that the virtio device writes into the used ring. In virtio_isr() (drivers/virtio/virtio_common.c), the device-written vq->used->ring[idx].id is used directly as an index into vq->recv_cbs[] and vq->desc[], which are both allocated with exactly vq->num entries. recv_cbs[] holds {cb, opaque} callback entries, and the indexed callback pointer is then invoked as cbe.cb(cbe.opaque, used_len). Because the id is consumed as a 16-bit value with no bound check, a malicious or compromised virtio backend (an untrusted hypervisor, or an untrusted hardware/peer-processor virtio device on a PCI or MMIO transport) can supply an id far beyond vq->num. This causes an out-of-bounds read of a {function pointer, argument} pair from heap memory beyond recv_cbs[], after which the driver calls that attacker-shaped pointer in the guest's interrupt context. No guest privileges or user interaction are required; the backend triggers it by writing the shared used ring and raising the queue interrupt. The result is an arbitrary / attacker-influenced function-pointer call in the Zephyr guest, i.e. a control-flow-hijack primitive that can lead to code execution or, at minimum, a reliable crash. The fix rejects any used-ring id >= vq->num before indexing recv_cbs[]/desc[] or invoking the callback. This affects builds using CONFIG_VIRTIO with the PCI or MMIO transport. | |||||
| CVE-2026-12233 | 2026-08-26 | N/A | 5.9 MEDIUM | ||
| The PSA Protected Storage credential backend (subsys/net/lib/tls_credentials/tls_credentials_trusted.c) declared its credential-store mutex as a plain zero-filled static struct k_mutex credential_lock; and never called k_mutex_init() on it. A statically zero-filled k_mutex has an uninitialized wait queue (its dlist head/tail are NULL instead of the self-referential sentinels that k_mutex_init/K_MUTEX_DEFINE install). The uncontended lock path does not touch the wait queue, so the defect is latent and serialized use behaves correctly. When two execution contexts contend on the lock, k_mutex_lock() pends the blocking thread on the wait queue via z_pend_curr(), which calls sys_dlist_append() on the zeroed list and dereferences a NULL tail pointer (tail->next = node), faulting the kernel. The lock is held during TLS handshake credential loading and by all credential add/get/delete operations, so a deployment performing concurrent TLS handshakes (for example a server handling multiple simultaneous connections from a remote peer) or a credential-management operation concurrent with a handshake can trigger the dereference. The impact is a denial of service: a deterministic kernel panic / device reset on the first contention. There is no memory corruption beyond the NULL dereference and no confidentiality or integrity impact; mutual exclusion on the fast path remains correct. Exposure is limited to builds with CONFIG_TLS_CREDENTIALS_BACKEND_PROTECTED_STORAGE enabled (PSA Protected Storage / TF-M platforms); the default volatile RAM backend initializes its lock correctly and is unaffected. The fix initializes the mutex statically with K_MUTEX_DEFINE(credential_lock), providing a valid wait queue so the contended path no longer touches a NULL list. | |||||
| CVE-2026-11893 | 2026-08-26 | N/A | 5.9 MEDIUM | ||
| The Bluetooth HCI driver for Bouffalo Lab on-chip BLE controllers (BL60x/BL70x/BL61x), bt_bflb_send() in drivers/bluetooth/hci/hci_bflb.c, violates the bt_hci_driver_api.send() buffer-ownership contract. That contract (documented at include/zephyr/drivers/bluetooth.h) requires the buffer reference to be consumed only on success; on error the caller still owns the reference and unrefs it. The driver instead routed all error paths through a shared label that unconditionally called net_buf_unref(buf) before returning the error code, consuming the buffer on failure as well. When send() returns an error, the host TX path (send_buf() in subsys/bluetooth/host/conn.c) unrefs the same buffer again, believing it still owns it. This double-unref over-decrements the net_buf reference count. Because the buffer is a TX fragment whose destroy callback also decrements its still-queued parent buffer, the parent is freed prematurely while reachable on the connection TX queue, producing a use-after-free and corruption of the shared net_buf pool rather than a benign leak. The error conditions are on the host-to-controller transmit path (controller send failure, or an unsupported H:4 packet type), so they are not driven directly by attacker-supplied radio bytes; a remote/adjacent peer can influence them only indirectly, e.g. by inducing controller TX failures under heavy link load. The consequence when reached is BLE-stack denial of service (crash / pool corruption) with possible further memory corruption, bounded to devices using one of these Bouffalo Lab on-chip controllers. | |||||
| CVE-2026-12363 | 2026-08-26 | N/A | 4.2 MEDIUM | ||
| The LoRaWAN Fragmented Data Block Transport service (subsys/lorawan/services/frag_transport.c) does not validate the fragment counter in a received DATA_FRAGMENT command before forwarding it to the configured decoder. In frag_transport_package_callback() the value frag_counter = hdr->frag_index_n & 0x3FFF is taken directly from the downlink payload and passed to the decoder, which derives an array index and flash offset as frag_counter - 1. DataFragment fragments are 1-indexed, so a frag_counter of 0 underflows that arithmetic. With the default Semtech/LoRaMAC-node decoder, this reaches FragDecoder.FragNbMissingIndex[fragCounter - 1] = 0; in FragDecoderProcess(), where fragCounter - 1 evaluates to -1 and writes a uint16_t zero out of bounds, just before the array and into the adjacent MatrixM2B recovery-matrix state of the static decoder object (CWE-787). A companion write derives a wild flash offset, but that path is rejected by the flash_area_write() bounds check. The in-tree low-memory decoder (frag_dec()) is not corrupted: its out-of-range bit-array and flash accesses are caught by sys_bitarray_ and flash_area_ bounds checks. The handler is the registered downlink callback for the fragmentation transport port, reachable whenever an active fragmentation session exists, so the triggering byte is attacker-influenceable LoRaWAN/FUOTA network input. Triggering it requires authenticated downlinks (LoRaWAN MAC session keys or a malicious/compromised network or FUOTA server) and an active fragmentation session. The impact is contained: corruption of decoder state and denial of the firmware-update (FUOTA) session rather than controllable memory corruption or code execution. The fix adds a transport-layer check that rejects frag_counter == 0, closing the defect for both decoder backends. | |||||
| CVE-2026-13213 | 2026-08-26 | N/A | 5.3 MEDIUM | ||
| The Hearing Access Service (HAS) GATT server in subsys/bluetooth/audio/has.c installs a connection-callback set unconditionally via BT_CONN_CB_DEFINE, so security_changed() runs for every connection that establishes security even before the application has called bt_has_register(). The service attribute pointers hearing_aid_features_attr, preset_control_point_attr, and active_preset_index_attr remain NULL until bt_has_register() resolves them and sets has.registered. With CONFIG_BT_SETTINGS, settings_set_cb() restores each bonded client's persisted context at boot and unconditionally sets context->flags to BONDED_CLIENT_INIT_FLAGS (non-zero). When a previously bonded peer reconnects and re-establishes security during the startup window before bt_has_register() has been called, security_changed() sees the non-zero flags and schedules notify_work_handler, which calls bt_gatt_is_subscribed() with a still-NULL attribute pointer. That triggers an assertion (__ASSERT(attr, ...) in bt_gatt_is_subscribed()), or a NULL dereference of attr->uuid when assertions are compiled out. The result is a remotely triggerable (Bluetooth, adjacent) crash of the HAS peripheral. Exploitation requires the peer to have previously bonded with the device and to reconnect within the boot-time race window before the application registers the service; a peer that reconnects persistently can prolong the outage. Impact is denial of service only, with no memory corruption or information disclosure. The fix adds an early if (!has.registered) { return; } guard in security_changed(), so no notification work is scheduled until the GATT service is registered and its attribute pointers are valid. | |||||
| CVE-2026-11894 | 2026-08-26 | N/A | 5.9 MEDIUM | ||
| The Realtek BEE Bluetooth HCI driver's send callback, bt_hci_bee_send() in drivers/bluetooth/hci/hci_bee.c, violated the bt_hci_driver_api buffer-ownership contract. That contract requires the driver to consume (unref) the transmit net_buf only on success; on an error return the host caller retains ownership and unrefs the buffer itself. The pre-fix code routed all error paths through a shared cleanup label that unconditionally called net_buf_unref(buf) before returning the error code. Because the host TX paths (in subsys/bluetooth/host/hci_core.c) unref the buffer again after send() returns an error, the buffer is freed twice: the driver returns it to its net_buf pool and the host then unrefs the already-freed buffer, corrupting the shared pool / underflowing the reference count (CWE-415). The same error branch additionally dereferenced buf->len inside a LOG_ERR call after the buffer had already been unref'd, a read of freed memory (CWE-416) that is compiled in at the default error log level. The failing edges are reached when the controller's host-to-controller buffer allocation fails or the controller send fails (resource-exhaustion / IO conditions). A remote Bluetooth peer can push the device toward these conditions indirectly by driving heavy host transmit activity, at which point the double-free corrupts the host net_buf pool and most likely crashes the device, with residual potential for further memory corruption. The impact is confined to builds using this specific Realtek BEE HCI driver. The fix returns early from each error path without unreffing and unrefs the buffer only on the success path, restoring the ownership contract and eliminating both the double-free and the use-after-free read. | |||||
| CVE-2026-13478 | 2026-08-26 | N/A | 5.5 MEDIUM | ||
| The Zephyr ext2 filesystem driver validates the on-disk block bitmap in ext2_init_fs() (subsys/fs/ext2/ext2_impl.c) by passing fs_blocks = s_blocks_count - s_first_data_block to ext2_bitmap_count_set(). That helper (subsys/fs/ext2/ext2_bitmap.c) treats its argument as a number of bits and reads one bitmap byte per eight bits, but the bitmap buffer (BGROUP_BLOCK_BITMAP) is a single fetched block of only fs->block_size bytes (capacity fs->block_size * 8 bits). s_blocks_count and s_first_data_block are taken verbatim from the superblock and were never bounded against this single-group capacity; ext2_verify_disk_superblock() checks the magic, revision, and block-size shift but not the block count. A crafted ext2 image with an oversized s_blocks_count (up to ~4 billion, against a maximum 4096-byte block / 32768-bit bitmap) makes ext2_bitmap_count_set() scan roughly 512 MB of memory past the bitmap block — a large out-of-bounds read of the static block slab and adjacent memory. The defect is reached during mount: ext2_init_fs() is invoked from ext2_mount() (subsys/fs/ext2/ext2_ops.c), the registered .mount operation. Any path that mounts an attacker-supplied ext2 image (removable media, a disk/flash partition, or a downloaded image) triggers it. The kernel-privileged parser operates on attacker-controlled data, so the bug is exploitable wherever untrusted ext2 media can be mounted. Impact is an out-of-bounds read only: the resulting bit count is compared internally and the mount is rejected, so no attacker-controlled bytes are returned (not a useful information leak). The ~512 MB over-read will almost certainly cross an unmapped or MPU-protected boundary and fault, crashing the system — a denial of service triggered by mounting a single malformed image. The fix rejects any image whose fs_blocks exceeds fs->block_size * 8 before the scan. | |||||
| CVE-2026-13215 | 2026-08-26 | N/A | 6.8 MEDIUM | ||
| The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE. That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on the first block read. The entire path is gated only by data read from the mounted image, making this reachable by any attacker who can present a crafted ext2 image to a device that mounts it (for example a removable SD card or storage medium). Because the ext2 driver runs in kernel mode, supplying image bytes yields a supervisor-mode memory-corruption primitive, with impact ranging from denial of service to potential code execution. The fix rejects s_log_block_size values that overflow the shift (greater than 11) or that produce a block size exceeding CONFIG_EXT2_MAX_BLOCK_SIZE, so the block slab can no longer be initialized larger than its backing buffer. | |||||
| CVE-2026-73605 | 2026-08-26 | N/A | 5.8 MEDIUM | ||
| SiYuan versions before v3.7.4 contain a path traversal vulnerability in the getUniqueFilename endpoint that allows anonymous readers to probe filesystem existence without validation or confinement. Attackers can supply arbitrary absolute paths to determine whether files and directories exist on the host, enabling reconnaissance of the filesystem layout and installed software. | |||||
| CVE-2026-74868 | 2026-08-26 | N/A | 7.5 HIGH | ||
| SiYuan versions before 3.7.4 contain an unthrottled brute-force vulnerability in the Publish Service Basic Auth implementation (PublishServiceTransport.RoundTrip() in kernel/server/proxy/publish.go). The Publish Service runs on a separate, unauthenticated-by-default listener (default TCP port 6808) and gates named publish-viewer accounts (Conf.Publish.Auth.Accounts) with Basic Auth that has no rate limiting, per-account lockout, or backoff. Unauthenticated remote attackers can submit unlimited password guesses against named accounts to gain access to published notes/notebooks. | |||||
| CVE-2026-72778 | 2026-08-26 | N/A | 8.8 HIGH | ||
| Craft CMS versions from 4.0.0-RC1 before 4.18.2 and from 5.0.0-RC1 before 5.10.6 contain an authenticated remote code execution vulnerability in the control panel element-search condition handling. Craft cleanses the outer request-controlled condition array via Component::cleanseConfig(), but Conditions::createCondition() later decodes and merges the JSON string in condition.config without re-running cleanseConfig() on the decoded configuration. Because condition.config is a JSON string during the first cleanse, Yii special config keys such as 'as ...' and 'on ...' can be hidden inside it and, after JSON decoding, are interpreted by Yii as behavior/event configuration during FieldLayout object creation. An attacker with an authenticated control panel session (and a valid CSRF token) can exploit this to execute operating system commands as the PHP/web user. | |||||
| CVE-2026-72783 | 2026-08-26 | N/A | 6.2 MEDIUM | ||
| Craft CMS versions >= 5.0.0-RC1 before 5.10.6 and >= 4.0.0-RC1 before 4.18.2 contain a theoretical path traversal weakness in the ensurePathIsContained function of the Local file system class. The order of operations validates the path before normalization, so normalization could invalidate prior validation assumptions (a desanitization-style issue) and potentially resolve to files outside the intended volume directory. The vendor notes the issue is not directly exploitable and no exploitable scenario has been discovered; the fix is recommended for hardening. | |||||
| CVE-2026-73060 | 2026-08-26 | N/A | 7.5 HIGH | ||
| Scriban versions from 3.0.0 through 7.2.5 contain a denial of service vulnerability in the ScriptRange.Multiply operator that bypasses LoopLimit when the left operand is a lazy sequence. Attackers can supply templates with array multiplication on lazy sequences to execute billions of uncharged iterations, pinning CPU cores and exhausting garbage collection resources even when LoopLimit is set to 1. | |||||
| CVE-2026-73047 | 2026-08-26 | N/A | 6.2 MEDIUM | ||
| siyuan versions <= 3.7.3 (fixed in v3.7.4) contain a server-side template injection vulnerability in the attribute-view Template calculation feature (introduced in v3.7.0-beta.1). The feature's template engine uses Sprig's unmodified function map, which still exposes the env, expandenv, and getHostByName functions that were removed elsewhere for CVE-2024-55660. A local, unauthenticated attacker (the kernel binds to 127.0.0.1 by default with no per-UID access control) can inject a malicious Template calculation formula to read environment variables belonging to the account running siyuan — including from a separate, unprivileged OS account — and to perform DNS lookups from the server's network position. | |||||
| CVE-2026-73607 | 2026-08-26 | N/A | 5.8 MEDIUM | ||
| SiYuan versions before v3.7.4 contain an information disclosure vulnerability in the /api/storage/getOutlineStorage endpoint that performs no authorization checks. Attackers can retrieve outline state including heading identifiers for any document by supplying its identifier, even for documents forbidden to the requester. | |||||