Total
19639 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-31474 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix tx.buf use-after-free in isotp_sendmsg() isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access to so->tx.buf. isotp_release() waits for ISOTP_IDLE via wait_event_interruptible() and then calls kfree(so->tx.buf). If a signal interrupts the wait_event_interruptible() inside close() while tx.state is ISOTP_SENDING, the loop exits early and release proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf) while sendmsg may still be reading so->tx.buf for the final CAN frame in isotp_fill_dataframe(). The so->tx.buf can be allocated once when the standard tx.buf length needs to be extended. Move the kfree() of this potentially extended tx.buf to sk_destruct time when either isotp_sendmsg() and isotp_release() are done. | |||||
| CVE-2026-31473 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices. | |||||
| CVE-2026-31470 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: virt: tdx-guest: Fix handling of host controlled 'quote' buffer length Validate host controlled value `quote_buf->out_len` that determines how many bytes of the quote are copied out to guest userspace. In TDX environments with remote attestation, quotes are not considered private, and can be forwarded to an attestation server. Catch scenarios where the host specifies a response length larger than the guest's allocation, or otherwise races modifying the response while the guest consumes it. This prevents contents beyond the pages allocated for `quote_buf` (up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace, and possibly forwarded in attestation requests. Recall that some deployments want per-container configs-tsm-report interfaces, so the leak may cross container protection boundaries, not just local root. | |||||
| CVE-2026-31469 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix UAF on dst_ops when IFF_XMIT_DST_RELEASE is cleared and napi_tx is false A UAF issue occurs when the virtio_net driver is configured with napi_tx=N and the device's IFF_XMIT_DST_RELEASE flag is cleared (e.g., during the configuration of tc route filter rules). When IFF_XMIT_DST_RELEASE is removed from the net_device, the network stack expects the driver to hold the reference to skb->dst until the packet is fully transmitted and freed. In virtio_net with napi_tx=N, skbs may remain in the virtio transmit ring for an extended period. If the network namespace is destroyed while these skbs are still pending, the corresponding dst_ops structure has freed. When a subsequent packet is transmitted, free_old_xmit() is triggered to clean up old skbs. It then calls dst_release() on the skb associated with the stale dst_entry. Since the dst_ops (referenced by the dst_entry) has already been freed, a UAF kernel paging request occurs. fix it by adds skb_dst_drop(skb) in start_xmit to explicitly release the dst reference before the skb is queued in virtio_net. Call Trace: Unable to handle kernel paging request at virtual address ffff80007e150000 CPU: 2 UID: 0 PID: 6236 Comm: ping Kdump: loaded Not tainted 7.0.0-rc1+ #6 PREEMPT ... percpu_counter_add_batch+0x3c/0x158 lib/percpu_counter.c:98 (P) dst_release+0xe0/0x110 net/core/dst.c:177 skb_release_head_state+0xe8/0x108 net/core/skbuff.c:1177 sk_skb_reason_drop+0x54/0x2d8 net/core/skbuff.c:1255 dev_kfree_skb_any_reason+0x64/0x78 net/core/dev.c:3469 napi_consume_skb+0x1c4/0x3a0 net/core/skbuff.c:1527 __free_old_xmit+0x164/0x230 drivers/net/virtio_net.c:611 [virtio_net] free_old_xmit drivers/net/virtio_net.c:1081 [virtio_net] start_xmit+0x7c/0x530 drivers/net/virtio_net.c:3329 [virtio_net] ... Reproduction Steps: NETDEV="enp3s0" config_qdisc_route_filter() { tc qdisc del dev $NETDEV root tc qdisc add dev $NETDEV root handle 1: prio tc filter add dev $NETDEV parent 1:0 \ protocol ip prio 100 route to 100 flowid 1:1 ip route add 192.168.1.100/32 dev $NETDEV realm 100 } test_ns() { ip netns add testns ip link set $NETDEV netns testns ip netns exec testns ifconfig $NETDEV 10.0.32.46/24 ip netns exec testns ping -c 1 10.0.32.1 ip netns del testns } config_qdisc_route_filter test_ns sleep 2 test_ns | |||||
| CVE-2026-31468 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: vfio/pci: Fix double free in dma-buf feature The error path through vfio_pci_core_feature_dma_buf() ignores its own advice to only use dma_buf_put() after dma_buf_export(), instead falling through the entire unwind chain. In the unlikely event that we encounter file descriptor exhaustion, this can result in an unbalanced refcount on the vfio device and double free of allocated objects. Avoid this by moving the "put" directly into the error path and return the errno rather than entering the unwind chain. | |||||
| CVE-2026-31464 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done() A malicious or compromised VIO server can return a num_written value in the discover targets MAD response that exceeds max_targets. This value is stored directly in vhost->num_targets without validation, and is then used as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which is only allocated for max_targets entries. Indices at or beyond max_targets access kernel memory outside the DMA-coherent allocation. The out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI MADs that are sent back to the VIO server, leaking kernel memory. Fix by clamping num_written to max_targets before storing it. | |||||
| CVE-2026-31454 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: xfs: save ailp before dropping the AIL lock in push callbacks In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock is dropped to perform buffer IO. Once the cluster buffer no longer protects the log item from reclaim, the log item may be freed by background reclaim or the dquot shrinker. The subsequent spin_lock() call dereferences lip->li_ailp, which is a use-after-free. Fix this by saving the ailp pointer in a local variable while the AIL lock is held and the log item is guaranteed to be valid. | |||||
| CVE-2026-31453 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: xfs: avoid dereferencing log items after push callbacks After xfsaild_push_item() calls iop_push(), the log item may have been freed if the AIL lock was dropped during the push. Background inode reclaim or the dquot shrinker can free the log item while the AIL lock is not held, and the tracepoints in the switch statement dereference the log item after iop_push() returns. Fix this by capturing the log item type, flags, and LSN before calling xfsaild_push_item(), and introducing a new xfs_ail_push_class trace event class that takes these pre-captured values and the ailp pointer instead of the log item pointer. | |||||
| CVE-2026-31450 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer. | |||||
| CVE-2026-31449 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: validate p_idx bounds in ext4_ext_correct_indexes ext4_ext_correct_indexes() walks up the extent tree correcting index entries when the first extent in a leaf is modified. Before accessing path[k].p_idx->ei_block, there is no validation that p_idx falls within the valid range of index entries for that level. If the on-disk extent header contains a corrupted or crafted eh_entries value, p_idx can point past the end of the allocated buffer, causing a slab-out-of-bounds read. Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at both access sites: before the while loop and inside it. Return -EFSCORRUPTED if the index pointer is out of range, consistent with how other bounds violations are handled in the ext4 extent tree code. | |||||
| CVE-2026-31448 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.4 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid infinite loops caused by residual data On the mkdir/mknod path, when mapping logical blocks to physical blocks, if inserting a new extent into the extent tree fails (in this example, because the file system disabled the huge file feature when marking the inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to reclaim the physical block without deleting the corresponding data in the extent tree. This causes subsequent mkdir operations to reference the previously reclaimed physical block number again, even though this physical block is already being used by the xattr block. Therefore, a situation arises where both the directory and xattr are using the same buffer head block in memory simultaneously. The above causes ext4_xattr_block_set() to enter an infinite loop about "inserted" and cannot release the inode lock, ultimately leading to the 143s blocking problem mentioned in [1]. If the metadata is corrupted, then trying to remove some extent space can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE was passed, remove space wrongly update quota information. Jan Kara suggests distinguishing between two cases: 1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully consistent and we must maintain its consistency including all the accounting. However these errors can happen only early before we've inserted the extent into the extent tree. So current code works correctly for this case. 2) Some other error - this means metadata is corrupted. We should strive to do as few modifications as possible to limit damage. So I'd just skip freeing of allocated blocks. [1] INFO: task syz.0.17:5995 blocked for more than 143 seconds. Call Trace: inode_lock_nested include/linux/fs.h:1073 [inline] __start_dirop fs/namei.c:2923 [inline] start_dirop fs/namei.c:2934 [inline] | |||||
| CVE-2026-31447 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: reject mount if bigalloc with s_first_data_block != 0 bigalloc with s_first_data_block != 0 is not supported, reject mounting it. | |||||
| CVE-2026-31446 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call. | |||||
| CVE-2026-31442 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible invalid memory access after FLR In the case that the first Function Level Reset (FLR) concludes correctly, but in the second FLR the scratch area for the saved configuration cannot be allocated, it's possible for a invalid memory access to happen. Always set the deallocated scratch area to NULL after FLR completes. | |||||
| CVE-2026-31436 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc() At the end of this function, d is the traversal cursor of flist, but the code completes found instead. This can lead to issues such as NULL pointer dereferences, double completion, or descriptor leaks. Fix this by completing d instead of found in the final list_for_each_entry_safe() loop. | |||||
| CVE-2026-31435 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix read abandonment during retry Under certain circumstances, all the remaining subrequests from a read request will get abandoned during retry. The abandonment process expects the 'subreq' variable to be set to the place to start abandonment from, but it doesn't always have a useful value (it will be uninitialised on the first pass through the loop and it may point to a deleted subrequest on later passes). Fix the first jump to "abandon:" to set subreq to the start of the first subrequest expected to need retry (which, in this abandonment case, turned out unexpectedly to no longer have NEED_RETRY set). Also clear the subreq pointer after discarding superfluous retryable subrequests to cause an oops if we do try to access it. | |||||
| CVE-2026-31426 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: EC: clean up handlers on probe failure in acpi_ec_setup() When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware platforms, it has already started the EC and installed the address space handler with the struct acpi_ec pointer as handler context. However, acpi_ec_setup() propagates the error without any cleanup. The caller acpi_ec_add() then frees the struct acpi_ec for non-boot instances, leaving a dangling handler context in ACPICA. Any subsequent AML evaluation that accesses an EC OpRegion field dispatches into acpi_ec_space_handler() with the freed pointer, causing a use-after-free: BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289) Write of size 8 at addr ffff88800721de38 by task init/1 Call Trace: <TASK> mutex_lock (kernel/locking/mutex.c:289) acpi_ec_space_handler (drivers/acpi/ec.c:1362) acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293) acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246) acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509) acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700) acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327) acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392) </TASK> Allocated by task 1: acpi_ec_alloc (drivers/acpi/ec.c:1424) acpi_ec_add (drivers/acpi/ec.c:1692) Freed by task 1: kfree (mm/slub.c:6876) acpi_ec_add (drivers/acpi/ec.c:1751) The bug triggers on reduced-hardware EC platforms (ec->gpe < 0) when the GPIO IRQ provider defers probing. Once the stale handler exists, any unprivileged sysfs read that causes AML to touch an EC OpRegion (battery, thermal, backlight) exercises the dangling pointer. Fix this by calling ec_remove_handlers() in the error path of acpi_ec_setup() before clearing first_ec. ec_remove_handlers() checks each EC_FLAGS_* bit before acting, so it is safe to call regardless of how far ec_install_handlers() progressed: -ENODEV (handler not installed): only calls acpi_ec_stop() -EPROBE_DEFER (handler installed): removes handler, stops EC | |||||
| CVE-2026-31414 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use expect->helper Use expect->helper in ctnetlink and /proc to dump the helper name. Using nfct_help() without holding a reference to the master conntrack is unsafe. Use exp->master->helper in ctnetlink path if userspace does not provide an explicit helper when creating an expectation to retain the existing behaviour. The ctnetlink expectation path holds the reference on the master conntrack and nf_conntrack_expect lock and the nfnetlink glue path refers to the master ct that is attached to the skb. | |||||
| CVE-2026-31408 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately releases the lock without holding a reference to the socket. A concurrent close() can free the socket between the lock release and the subsequent sk->sk_state access, resulting in a use-after-free. Other functions in the same file (sco_sock_timeout(), sco_conn_del()) correctly use sco_sock_hold() to safely hold a reference under the lock. Fix by using sco_sock_hold() to take a reference before releasing the lock, and adding sock_put() on all exit paths. | |||||
| CVE-2026-31407 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: add missing netlink policy validations Hyunwoo Kim reports out-of-bounds access in sctp and ctnetlink. These attributes are used by the kernel without any validation. Extend the netlink policies accordingly. Quoting the reporter: nlattr_to_sctp() assigns the user-supplied CTA_PROTOINFO_SCTP_STATE value directly to ct->proto.sctp.state without checking that it is within the valid range. [..] and: ... with exp->dir = 100, the access at ct->master->tuplehash[100] reads 5600 bytes past the start of a 320-byte nf_conn object, causing a slab-out-of-bounds read confirmed by UBSAN. | |||||