Total
36333 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-48852 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 3.3 LOW |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Unregister codec device on unbind On bind we will register the HDMI codec device but we don't unregister it on unbind, leading to a device leakage. Unregister our device at unbind. | |||||
| CVE-2022-48849 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: bypass tiling flag check in virtual display case (v2) vkms leverages common amdgpu framebuffer creation, and also as it does not support FB modifier, there is no need to check tiling flags when initing framebuffer when virtual display is enabled. This can fix below calltrace: amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu] v2: check adev->enable_virtual_display instead as vkms can be enabled in bare metal as well. | |||||
| CVE-2022-48848 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Do not unregister events twice Nicolas reported that using: # trace-cmd record -e all -M 10 -p osnoise --poll Resulted in the following kernel warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1217 at kernel/tracepoint.c:404 tracepoint_probe_unregister+0x280/0x370 [...] CPU: 0 PID: 1217 Comm: trace-cmd Not tainted 5.17.0-rc6-next-20220307-nico+ #19 RIP: 0010:tracepoint_probe_unregister+0x280/0x370 [...] CR2: 00007ff919b29497 CR3: 0000000109da4005 CR4: 0000000000170ef0 Call Trace: <TASK> osnoise_workload_stop+0x36/0x90 tracing_set_tracer+0x108/0x260 tracing_set_trace_write+0x94/0xd0 ? __check_object_size.part.0+0x10a/0x150 ? selinux_file_permission+0x104/0x150 vfs_write+0xb5/0x290 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7ff919a18127 [...] ---[ end trace 0000000000000000 ]--- The warning complains about an attempt to unregister an unregistered tracepoint. This happens on trace-cmd because it first stops tracing, and then switches the tracer to nop. Which is equivalent to: # cd /sys/kernel/tracing/ # echo osnoise > current_tracer # echo 0 > tracing_on # echo nop > current_tracer The osnoise tracer stops the workload when no trace instance is actually collecting data. This can be caused both by disabling tracing or disabling the tracer itself. To avoid unregistering events twice, use the existing trace_osnoise_callback_enabled variable to check if the events (and the workload) are actually active before trying to deactivate them. | |||||
| CVE-2022-48845 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: smp: fill in sibling and core maps earlier After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle), 2-core 2-thread-per-core interAptiv (CPS-driven) started emitting the following: [ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi)) [ 0.048183] ------------[ cut here ]------------ [ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240 [ 0.048220] Modules linked in: [ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f [ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1 [ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000 [ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000 [ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34 [ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933 [ 0.048389] ... [ 0.048396] Call Trace: [ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140 [ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80 [ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4 [ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c [ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240 [ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80 [ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140 [ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140 [ 0.048523] [<8106593c>] start_secondary+0xbc/0x280 [ 0.048539] [ 0.048543] ---[ end trace 0000000000000000 ]--- [ 0.048636] Synchronize counters for CPU 1: done. ...for each but CPU 0/boot. Basic debug printks right before the mentioned line say: [ 0.048170] CPU: 1, smt_mask: So smt_mask, which is sibling mask obviously, is empty when entering the function. This is critical, as sched_core_cpu_starting() calculates core-scheduling parameters only once per CPU start, and it's crucial to have all the parameters filled in at that moment (at least it uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on MIPS). A bit of debugging led me to that set_cpu_sibling_map() performing the actual map calculation, was being invocated after notify_cpu_start(), and exactly the latter function starts CPU HP callback round (sched_core_cpu_starting() is basically a CPU HP callback). While the flow is same on ARM64 (maps after the notifier, although before calling set_cpu_online()), x86 started calculating sibling maps earlier than starting the CPU HP callbacks in Linux 4.14 (see [0] for the reference). Neither me nor my brief tests couldn't find any potential caveats in calculating the maps right after performing delay calibration, but the WARN splat is now gone. The very same debug prints now yield exactly what I expected from them: [ 0.048433] CPU: 1, smt_mask: 0-1 [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef | |||||
| CVE-2022-48836 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Input: aiptek - properly check endpoint type Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593 | |||||
| CVE-2022-48834 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Fix bug in pipe direction for control transfers The syzbot fuzzer reported a minor bug in the usbtmc driver: usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0 WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412 usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline] The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for all of its transfers, whether they are in or out. It's easy to fix. | |||||
| CVE-2022-48833 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: skip reserved bytes warning on unmount after log cleanup failure After the recent changes made by commit c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it") and its followup fix, commit 651740a5024117 ("btrfs: check WRITE_ERR when trying to read an extent buffer"), we can now end up not cleaning up space reservations of log tree extent buffers after a transaction abort happens, as well as not cleaning up still dirty extent buffers. This happens because if writeback for a log tree extent buffer failed, then we have cleared the bit EXTENT_BUFFER_UPTODATE from the extent buffer and we have also set the bit EXTENT_BUFFER_WRITE_ERR on it. Later on, when trying to free the log tree with free_log_tree(), which iterates over the tree, we can end up getting an -EIO error when trying to read a node or a leaf, since read_extent_buffer_pages() returns -EIO if an extent buffer does not have EXTENT_BUFFER_UPTODATE set and has the EXTENT_BUFFER_WRITE_ERR bit set. Getting that -EIO means that we return immediately as we can not iterate over the entire tree. In that case we never update the reserved space for an extent buffer in the respective block group and space_info object. When this happens we get the following traces when unmounting the fs: [174957.284509] BTRFS: error (device dm-0) in cleanup_transaction:1913: errno=-5 IO failure [174957.286497] BTRFS: error (device dm-0) in free_log_tree:3420: errno=-5 IO failure [174957.399379] ------------[ cut here ]------------ [174957.402497] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:127 btrfs_put_block_group+0x77/0xb0 [btrfs] [174957.407523] Modules linked in: btrfs overlay dm_zero (...) [174957.424917] CPU: 2 PID: 3206883 Comm: umount Tainted: G W 5.16.0-rc5-btrfs-next-109 #1 [174957.426689] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [174957.428716] RIP: 0010:btrfs_put_block_group+0x77/0xb0 [btrfs] [174957.429717] Code: 21 48 8b bd (...) [174957.432867] RSP: 0018:ffffb70d41cffdd0 EFLAGS: 00010206 [174957.433632] RAX: 0000000000000001 RBX: ffff8b09c3848000 RCX: ffff8b0758edd1c8 [174957.434689] RDX: 0000000000000001 RSI: ffffffffc0b467e7 RDI: ffff8b0758edd000 [174957.436068] RBP: ffff8b0758edd000 R08: 0000000000000000 R09: 0000000000000000 [174957.437114] R10: 0000000000000246 R11: 0000000000000000 R12: ffff8b09c3848148 [174957.438140] R13: ffff8b09c3848198 R14: ffff8b0758edd188 R15: dead000000000100 [174957.439317] FS: 00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000 [174957.440402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [174957.441164] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0 [174957.442117] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [174957.443076] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [174957.443948] Call Trace: [174957.444264] <TASK> [174957.444538] btrfs_free_block_groups+0x255/0x3c0 [btrfs] [174957.445238] close_ctree+0x301/0x357 [btrfs] [174957.445803] ? call_rcu+0x16c/0x290 [174957.446250] generic_shutdown_super+0x74/0x120 [174957.446832] kill_anon_super+0x14/0x30 [174957.447305] btrfs_kill_super+0x12/0x20 [btrfs] [174957.447890] deactivate_locked_super+0x31/0xa0 [174957.448440] cleanup_mnt+0x147/0x1c0 [174957.448888] task_work_run+0x5c/0xa0 [174957.449336] exit_to_user_mode_prepare+0x1e5/0x1f0 [174957.449934] syscall_exit_to_user_mode+0x16/0x40 [174957.450512] do_syscall_64+0x48/0xc0 [174957.450980] entry_SYSCALL_64_after_hwframe+0x44/0xae [174957.451605] RIP: 0033:0x7f328fdc4a97 [174957.452059] Code: 03 0c 00 f7 (...) [174957.454320] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [174957.455262] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97 [174957.456131] RDX: 0000000000000000 RSI: 00000000000000 ---truncated--- | |||||
| CVE-2022-48832 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: audit: don't deref the syscall args when checking the openat2 open_how::flags As reported by Jeff, dereferencing the openat2 syscall argument in audit_match_perm() to obtain the open_how::flags can result in an oops/page-fault. This patch fixes this by using the open_how struct that we store in the audit_context with audit_openat2_how(). Independent of this patch, Richard Guy Briggs posted a similar patch to the audit mailing list roughly 40 minutes after this patch was posted. | |||||
| CVE-2022-48819 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: take care of mixed splice()/sendmsg(MSG_ZEROCOPY) case syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY) calls over the same TCP socket would again trigger the infamous warning in inet_sock_destruct() WARN_ON(sk_forward_alloc_get(sk)); While Talal took into account a mix of regular copied data and MSG_ZEROCOPY one in the same skb, the sendpage() path has been forgotten. We want the charging to happen for sendpage(), because pages could be coming from a pipe. What is missing is the downgrading of pure zerocopy status to make sure sk_forward_alloc will stay synced. Add tcp_downgrade_zcopy_pure() helper so that we can use it from the two callers. | |||||
| CVE-2022-48818 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The mv88e6xxx is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the Marvell switch driver on shutdown. systemd-shutdown[1]: Powering off. mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down fsl-mc dpbp.9: Removing from iommu group 7 fsl-mc dpbp.8: Removing from iommu group 7 ------------[ cut here ]------------ kernel BUG at drivers/net/phy/mdio_bus.c:677! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15 pc : mdiobus_free+0x44/0x50 lr : devm_mdiobus_free+0x10/0x20 Call trace: mdiobus_free+0x44/0x50 devm_mdiobus_free+0x10/0x20 devres_release_all+0xa0/0x100 __device_release_driver+0x190/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x4c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 kernel_power_off+0x34/0x6c __do_sys_reboot+0x15c/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The Marvell driver already has a good structure for mdiobus removal, so just plug in mdiobus_free and get rid of devres. | |||||
| CVE-2022-48817 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: ar9331: register the mdiobus under devres As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The ar9331 is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the ar9331 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The ar9331 driver doesn't have a complex code structure for mdiobus removal, so just replace of_mdiobus_register with the devres variant in order to be all-devres and ensure that we don't free a still-registered bus. | |||||
| CVE-2022-48815 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Starfighter 2 is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the bcm_sf2 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The bcm_sf2 driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. | |||||
| CVE-2022-48814 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: seville: register the mdiobus under devres As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Seville VSC9959 switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the seville switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The seville driver has a code structure that could accommodate both the mdiobus_unregister and mdiobus_free calls, but it has an external dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls devm_mdiobus_alloc_size() on its behalf. So rather than restructuring that, and exporting yet one more symbol mscc_miim_teardown(), let's work with devres and replace of_mdiobus_register with the devres variant. When we use all-devres, we can ensure that devres doesn't free a still-registered bus (it either runs both callbacks, or none). | |||||
| CVE-2022-48813 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Felix VSC9959 switch is a PCI device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the felix switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The felix driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc_size() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. | |||||
| CVE-2022-48812 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The GSWIP switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the GSWIP switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The gswip driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. | |||||
| CVE-2022-48808 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix panic when DSA master device unbinds on shutdown Rafael reports that on a system with LX2160A and Marvell DSA switches, if a reboot occurs while the DSA master (dpaa2-eth) is up, the following panic can be seen: systemd-shutdown[1]: Rebooting. Unable to handle kernel paging request at virtual address 00a0000800000041 [00a0000800000041] address between user and kernel address ranges Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00042-g8f5585009b24 #32 pc : dsa_slave_netdevice_event+0x130/0x3e4 lr : raw_notifier_call_chain+0x50/0x6c Call trace: dsa_slave_netdevice_event+0x130/0x3e4 raw_notifier_call_chain+0x50/0x6c call_netdevice_notifiers_info+0x54/0xa0 __dev_close_many+0x50/0x130 dev_close_many+0x84/0x120 unregister_netdevice_many+0x130/0x710 unregister_netdevice_queue+0x8c/0xd0 unregister_netdev+0x20/0x30 dpaa2_eth_remove+0x68/0x190 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 __do_sys_reboot+0x1cc/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c It can be seen from the stack trace that the problem is that the deregistration of the master causes a dev_close(), which gets notified as NETDEV_GOING_DOWN to dsa_slave_netdevice_event(). But dsa_switch_shutdown() has already run, and this has unregistered the DSA slave interfaces, and yet, the NETDEV_GOING_DOWN handler attempts to call dev_close_many() on those slave interfaces, leading to the problem. The previous attempt to avoid the NETDEV_GOING_DOWN on the master after dsa_switch_shutdown() was called seems improper. Unregistering the slave interfaces is unnecessary and unhelpful. Instead, after the slaves have stopped being uppers of the DSA master, we can now reset to NULL the master->dsa_ptr pointer, which will make DSA start ignoring all future notifier events on the master. | |||||
| CVE-2022-48802 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/proc: task_mmu.c: don't read mapcount for migration entry The syzbot reported the below BUG: kernel BUG at include/linux/page-flags.h:785! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline] RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744 Call Trace: page_mapcount include/linux/mm.h:837 [inline] smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466 smaps_pte_entry fs/proc/task_mmu.c:538 [inline] smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379 walk_page_vma+0x277/0x350 mm/pagewalk.c:530 smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768 smap_gather_stats fs/proc/task_mmu.c:741 [inline] show_smap+0xc6/0x440 fs/proc/task_mmu.c:822 seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272 seq_read+0x3e0/0x5b0 fs/seq_file.c:162 vfs_read+0x1b5/0x600 fs/read_write.c:479 ksys_read+0x12d/0x250 fs/read_write.c:619 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The reproducer was trying to read /proc/$PID/smaps when calling MADV_FREE at the mean time. MADV_FREE may split THPs if it is called for partial THP. It may trigger the below race: CPU A CPU B ----- ----- smaps walk: MADV_FREE: page_mapcount() PageCompound() split_huge_page() page = compound_head(page) PageDoubleMap(page) When calling PageDoubleMap() this page is not a tail page of THP anymore so the BUG is triggered. This could be fixed by elevated refcount of the page before calling mapcount, but that would prevent it from counting migration entries, and it seems overkilling because the race just could happen when PMD is split so all PTE entries of tail pages are actually migration entries, and smaps_account() does treat migration entries as mapcount == 1 as Kirill pointed out. Add a new parameter for smaps_account() to tell this entry is migration entry then skip calling page_mapcount(). Don't skip getting mapcount for device private entries since they do track references with mapcount. Pagemap also has the similar issue although it was not reported. Fixed it as well. [shy828301@gmail.com: v4] [nathan@kernel.org: avoid unused variable warning in pagemap_pmd_range()] | |||||
| CVE-2022-48799 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix list corruption in perf_cgroup_switch() There's list corruption on cgrp_cpuctx_list. This happens on the following path: perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list) cpu_ctx_sched_in ctx_sched_in ctx_pinned_sched_in merge_sched_in perf_cgroup_event_disable: remove the event from the list Use list_for_each_entry_safe() to allow removing an entry during iteration. | |||||
| CVE-2022-48798 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/cio: verify the driver availability for path_event call If no driver is attached to a device or the driver does not provide the path_event function, an FCES path-event on this device could end up in a kernel-panic. Verify the driver availability before the path_event function call. | |||||
| CVE-2022-48795 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: parisc: Fix data TLB miss in sba_unmap_sg Rolf Eike Beer reported the following bug: [1274934.746891] Bad Address (null pointer deref?): Code=15 (Data TLB miss fault) at addr 0000004140000018 [1274934.746891] CPU: 3 PID: 5549 Comm: cmake Not tainted 5.15.4-gentoo-parisc64 #4 [1274934.746891] Hardware name: 9000/785/C8000 [1274934.746891] [1274934.746891] YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI [1274934.746891] PSW: 00001000000001001111111000001110 Not tainted [1274934.746891] r00-03 000000ff0804fe0e 0000000040bc9bc0 00000000406760e4 0000004140000000 [1274934.746891] r04-07 0000000040b693c0 0000004140000000 000000004a2b08b0 0000000000000001 [1274934.746891] r08-11 0000000041f98810 0000000000000000 000000004a0a7000 0000000000000001 [1274934.746891] r12-15 0000000040bddbc0 0000000040c0cbc0 0000000040bddbc0 0000000040bddbc0 [1274934.746891] r16-19 0000000040bde3c0 0000000040bddbc0 0000000040bde3c0 0000000000000007 [1274934.746891] r20-23 0000000000000006 000000004a368950 0000000000000000 0000000000000001 [1274934.746891] r24-27 0000000000001fff 000000000800000e 000000004a1710f0 0000000040b693c0 [1274934.746891] r28-31 0000000000000001 0000000041f988b0 0000000041f98840 000000004a171118 [1274934.746891] sr00-03 00000000066e5800 0000000000000000 0000000000000000 00000000066e5800 [1274934.746891] sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [1274934.746891] [1274934.746891] IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000406760e8 00000000406760ec [1274934.746891] IIR: 48780030 ISR: 0000000000000000 IOR: 0000004140000018 [1274934.746891] CPU: 3 CR30: 00000040e3a9c000 CR31: ffffffffffffffff [1274934.746891] ORIG_R28: 0000000040acdd58 [1274934.746891] IAOQ[0]: sba_unmap_sg+0xb0/0x118 [1274934.746891] IAOQ[1]: sba_unmap_sg+0xb4/0x118 [1274934.746891] RP(r2): sba_unmap_sg+0xac/0x118 [1274934.746891] Backtrace: [1274934.746891] [<00000000402740cc>] dma_unmap_sg_attrs+0x6c/0x70 [1274934.746891] [<000000004074d6bc>] scsi_dma_unmap+0x54/0x60 [1274934.746891] [<00000000407a3488>] mptscsih_io_done+0x150/0xd70 [1274934.746891] [<0000000040798600>] mpt_interrupt+0x168/0xa68 [1274934.746891] [<0000000040255a48>] __handle_irq_event_percpu+0xc8/0x278 [1274934.746891] [<0000000040255c34>] handle_irq_event_percpu+0x3c/0xd8 [1274934.746891] [<000000004025ecb4>] handle_percpu_irq+0xb4/0xf0 [1274934.746891] [<00000000402548e0>] generic_handle_irq+0x50/0x70 [1274934.746891] [<000000004019a254>] call_on_stack+0x18/0x24 [1274934.746891] [1274934.746891] Kernel panic - not syncing: Bad Address (null pointer deref?) The bug is caused by overrunning the sglist and incorrectly testing sg_dma_len(sglist) before nents. Normally this doesn't cause a crash, but in this case sglist crossed a page boundary. This occurs in the following code: while (sg_dma_len(sglist) && nents--) { The fix is simply to test nents first and move the decrement of nents into the loop. | |||||