Total
36333 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-37147 | 1 Glpi-project | 1 Glpi | 2026-06-17 | N/A | 4.3 MEDIUM |
| GLPI is an open-source asset and IT management software package that provides ITIL Service Desk features, licenses tracking and software auditing. An authenticated user can attach a document to any item, even if the user has no write access on it. Upgrade to 10.0.16. | |||||
| CVE-2024-37139 | 1 Dell | 1 Data Domain Operating System | 2026-06-17 | N/A | 6.5 MEDIUM |
| Dell PowerProtect DD, versions prior to 8.0, LTS 7.13.1.0, LTS 7.10.1.30, LTS 7.7.5.40 contain an Improper Control of a Resource Through its Lifetime vulnerability in an admin operation. A remote low privileged attacker could potentially exploit this vulnerability, leading to temporary resource constraint of system application. Exploitation may lead to denial of service of the application. | |||||
| CVE-2024-37136 | 1 Dell | 1 Path To Powerprotect | 2026-06-17 | N/A | 6.8 MEDIUM |
| Dell Path to PowerProtect, versions 1.1, 1.2, contains an Exposure of Private Personal Information to an Unauthorized Actor vulnerability. A remote high privileged attacker could potentially exploit this vulnerability, leading to information exposure. | |||||
| CVE-2024-37134 | 1 Dell | 1 Powerscale Onefs | 2026-06-17 | N/A | 6.7 MEDIUM |
| Dell PowerScale OneFS versions 8.2.2.x through 9.8.0.0 contain an improper privilege management vulnerability. A local high privileged attacker could potentially exploit this vulnerability to gain root-level access. | |||||
| CVE-2024-37133 | 1 Dell | 1 Powerscale Onefs | 2026-06-17 | N/A | 6.7 MEDIUM |
| Dell PowerScale OneFS versions 8.2.2.x through 9.8.0.0 contain an improper privilege management vulnerability. A local high privileged attacker could potentially exploit this vulnerability, leading to unauthorized gain of root-level access. | |||||
| CVE-2024-37132 | 1 Dell | 1 Powerscale Onefs | 2026-06-17 | N/A | 6.7 MEDIUM |
| Dell PowerScale OneFS versions 8.2.2.x through 9.8.0.0 contain an incorrect privilege assignment vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to Denial of service and Elevation of privileges. | |||||
| CVE-2024-37126 | 1 Dell | 1 Powerscale Onefs | 2026-06-17 | N/A | 6.7 MEDIUM |
| Dell PowerScale OneFS versions 8.2.2.x through 9.8.0.0 contain an improper privilege management vulnerability. A local high privileged attacker could potentially exploit this vulnerability, leading to unauthorized gain of root-level access. | |||||
| CVE-2024-37125 | 1 Dell | 1 Smartfabric Os10 | 2026-06-17 | N/A | 7.5 HIGH |
| Dell SmartFabric OS10 Software, versions 10.5.6.x, 10.5.5.x, 10.5.4.x,10.5.3.x, contains an Uncontrolled Resource Consumption vulnerability. A remote unauthenticated host could potentially exploit this vulnerability leading to a denial of service. | |||||
| CVE-2024-37107 | 1 Wishlistmember | 1 Wishlist Member X | 2026-06-17 | N/A | 8.8 HIGH |
| Improper Privilege Management vulnerability in Membership Software WishList Member X allows Privilege Escalation.This issue affects WishList Member X: from n/a before 3.26.7. | |||||
| CVE-2024-37084 | 1 Vmware | 1 Spring Cloud Data Flow | 2026-06-17 | N/A | 9.8 CRITICAL |
| In Spring Cloud Data Flow versions prior to 2.11.4, a malicious user who has access to the Skipper server api can use a crafted upload request to write an arbitrary file to any location on the file system which could lead to compromising the server | |||||
| CVE-2024-37026 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Only use reserved BCS instances for usm migrate exec queue The GuC context scheduling queue is 2 entires deep, thus it is possible for a migration job to be stuck behind a fault if migration exec queue shares engines with user jobs. This can deadlock as the migrate exec queue is required to service page faults. Avoid deadlock by only using reserved BCS instances for usm migrate exec queue. (cherry picked from commit 04f4a70a183a688a60fe3882d6e4236ea02cfc67) | |||||
| CVE-2024-37014 | 1 Langflow | 1 Langflow | 2026-06-17 | N/A | 9.8 CRITICAL |
| Langflow through 0.6.19 allows remote code execution if untrusted users are able to reach the "POST /api/v1/custom_component" endpoint and provide a Python script. | |||||
| CVE-2024-36989 | 1 Splunk | 2 Cloud, Splunk | 2026-06-17 | N/A | 7.1 HIGH |
| In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.200, a low-privileged user that does not hold the admin or power Splunk roles could create notifications in Splunk Web Bulletin Messages that all users on the instance receive. | |||||
| CVE-2024-36986 | 1 Splunk | 2 Cloud, Splunk | 2026-06-17 | N/A | 6.3 MEDIUM |
| In Splunk Enterprise versions below 9.2.2, 9.1.5, and 9.0.10 and Splunk Cloud Platform versions below 9.1.2312.200 and 9.1.2308.207, an authenticated user could run risky commands using the permissions of a higher-privileged user to bypass SPL safeguards for risky commands in the Analytics Workspace. The vulnerability requires the authenticated user to phish the victim by tricking them into initiating a request within their browser. The authenticated user should not be able to exploit the vulnerability at will. | |||||
| CVE-2024-36975 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Do not use WARN when encode fails When asn1_encode_sequence() fails, WARN is not the correct solution. 1. asn1_encode_sequence() is not an internal function (located in lib/asn1_encode.c). 2. Location is known, which makes the stack trace useless. 3. Results a crash if panic_on_warn is set. It is also noteworthy that the use of WARN is undocumented, and it should be avoided unless there is a carefully considered rationale to use it. Replace WARN with pr_err, and print the return value instead, which is only useful piece of information. | |||||
| CVE-2024-36956 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Free all thermal zone debug memory on zone removal Because thermal_debug_tz_remove() does not free all memory allocated for thermal zone diagnostics, some of that memory becomes unreachable after freeing the thermal zone's struct thermal_debugfs object. Address this by making thermal_debug_tz_remove() free all of the memory in question. Cc :6.8+ <stable@vger.kernel.org> # 6.8+ | |||||
| CVE-2024-36951 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: range check cp bad op exception interrupts Due to a CP interrupt bug, bad packet garbage exception codes are raised. Do a range check so that the debugger and runtime do not receive garbage codes. Update the user api to guard exception code type checking as well. | |||||
| CVE-2024-36950 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 4.4 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: firewire: ohci: mask bus reset interrupts between ISR and bottom half In the FireWire OHCI interrupt handler, if a bus reset interrupt has occurred, mask bus reset interrupts until bus_reset_work has serviced and cleared the interrupt. Normally, we always leave bus reset interrupts masked. We infer the bus reset from the self-ID interrupt that happens shortly thereafter. A scenario where we unmask bus reset interrupts was introduced in 2008 in a007bb857e0b26f5d8b73c2ff90782d9c0972620: If OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we will unmask bus reset interrupts so we can log them. irq_handler logs the bus reset interrupt. However, we can't clear the bus reset event flag in irq_handler, because we won't service the event until later. irq_handler exits with the event flag still set. If the corresponding interrupt is still unmasked, the first bus reset will usually freeze the system due to irq_handler being called again each time it exits. This freeze can be reproduced by loading firewire_ohci with "modprobe firewire_ohci debug=-1" (to enable all debugging output). Apparently there are also some cases where bus_reset_work will get called soon enough to clear the event, and operation will continue normally. This freeze was first reported a few months after a007bb85 was committed, but until now it was never fixed. The debug level could safely be set to -1 through sysfs after the module was loaded, but this would be ineffectual in logging bus reset interrupts since they were only unmasked during initialization. irq_handler will now leave the event flag set but mask bus reset interrupts, so irq_handler won't be called again and there will be no freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will unmask the interrupt after servicing the event, so future interrupts will be caught as desired. As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be enabled through sysfs in addition to during initial module loading. However, when enabled through sysfs, logging of bus reset interrupts will be effective only starting with the second bus reset, after bus_reset_work has executed. | |||||
| CVE-2024-36939 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfs: Handle error of rpc_proc_register() in nfs_net_init(). syzkaller reported a warning [0] triggered while destroying immature netns. rpc_proc_register() was called in init_nfs_fs(), but its error has been ignored since at least the initial commit 1da177e4c3f4 ("Linux-2.6.12-rc2"). Recently, commit d47151b79e32 ("nfs: expose /proc/net/sunrpc/nfs in net namespaces") converted the procfs to per-netns and made the problem more visible. Even when rpc_proc_register() fails, nfs_net_init() could succeed, and thus nfs_net_exit() will be called while destroying the netns. Then, remove_proc_entry() will be called for non-existing proc directory and trigger the warning below. Let's handle the error of rpc_proc_register() properly in nfs_net_init(). [0]: name 'nfs' WARNING: CPU: 1 PID: 1710 at fs/proc/generic.c:711 remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711 Modules linked in: CPU: 1 PID: 1710 Comm: syz-executor.2 Not tainted 6.8.0-12822-gcd51db110a7e #12 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:remove_proc_entry+0x1bb/0x2d0 fs/proc/generic.c:711 Code: 41 5d 41 5e c3 e8 85 09 b5 ff 48 c7 c7 88 58 64 86 e8 09 0e 71 02 e8 74 09 b5 ff 4c 89 e6 48 c7 c7 de 1b 80 84 e8 c5 ad 97 ff <0f> 0b eb b1 e8 5c 09 b5 ff 48 c7 c7 88 58 64 86 e8 e0 0d 71 02 eb RSP: 0018:ffffc9000c6d7ce0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8880422b8b00 RCX: ffffffff8110503c RDX: ffff888030652f00 RSI: ffffffff81105045 RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff81bb62cb R12: ffffffff84807ffc R13: ffff88804ad6fcc0 R14: ffffffff84807ffc R15: ffffffff85741ff8 FS: 00007f30cfba8640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff51afe8000 CR3: 000000005a60a005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> rpc_proc_unregister+0x64/0x70 net/sunrpc/stats.c:310 nfs_net_exit+0x1c/0x30 fs/nfs/inode.c:2438 ops_exit_list+0x62/0xb0 net/core/net_namespace.c:170 setup_net+0x46c/0x660 net/core/net_namespace.c:372 copy_net_ns+0x244/0x590 net/core/net_namespace.c:505 create_new_namespaces+0x2ed/0x770 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xae/0x160 kernel/nsproxy.c:228 ksys_unshare+0x342/0x760 kernel/fork.c:3322 __do_sys_unshare kernel/fork.c:3393 [inline] __se_sys_unshare kernel/fork.c:3391 [inline] __x64_sys_unshare+0x1f/0x30 kernel/fork.c:3391 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7f30d0febe5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f30cfba7cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f30d0febe5d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000006c020600 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 000000000000000b R14: 00007f30d104c530 R15: 0000000000000000 </TASK> | |||||
| CVE-2024-36920 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Avoid memcpy field-spanning write WARNING When the "storcli2 show" command is executed for eHBA-9600, mpi3mr driver prints this WARNING message: memcpy: detected field-spanning write (size 128) of single field "bsg_reply_buf->reply_buf" at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 (size 1) WARNING: CPU: 0 PID: 12760 at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 mpi3mr_bsg_request+0x6b12/0x7f10 [mpi3mr] The cause of the WARN is 128 bytes memcpy to the 1 byte size array "__u8 replay_buf[1]" in the struct mpi3mr_bsg_in_reply_buf. The array is intended to be a flexible length array, so the WARN is a false positive. To suppress the WARN, remove the constant number '1' from the array declaration and clarify that it has flexible length. Also, adjust the memory allocation size to match the change. | |||||