Total
36333 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-23138 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: watch_queue: fix pipe accounting mismatch Currently, watch_queue_set_size() modifies the pipe buffers charged to user->pipe_bufs without updating the pipe->nr_accounted on the pipe itself, due to the if (!pipe_has_watch_queue()) test in pipe_resize_ring(). This means that when the pipe is ultimately freed, we decrement user->pipe_bufs by something other than what than we had charged to it, potentially leading to an underflow. This in turn can cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM. To remedy this, explicitly account for the pipe usage in watch_queue_set_size() to match the number set via account_pipe_buffers() (It's unclear why watch_queue_set_size() does not update nr_accounted; it may be due to intentional overprovisioning in watch_queue_set_size()?) | |||||
| CVE-2025-23135 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Teardown riscv specific bits after kvm_exit During a module removal, kvm_exit invokes arch specific disable call which disables AIA. However, we invoke aia_exit before kvm_exit resulting in the following warning. KVM kernel module can't be inserted afterwards due to inconsistent state of IRQ. [25469.031389] percpu IRQ 31 still enabled on CPU0! [25469.031732] WARNING: CPU: 3 PID: 943 at kernel/irq/manage.c:2476 __free_percpu_irq+0xa2/0x150 [25469.031804] Modules linked in: kvm(-) [25469.031848] CPU: 3 UID: 0 PID: 943 Comm: rmmod Not tainted 6.14.0-rc5-06947-g91c763118f47-dirty #2 [25469.031905] Hardware name: riscv-virtio,qemu (DT) [25469.031928] epc : __free_percpu_irq+0xa2/0x150 [25469.031976] ra : __free_percpu_irq+0xa2/0x150 [25469.032197] epc : ffffffff8007db1e ra : ffffffff8007db1e sp : ff2000000088bd50 [25469.032241] gp : ffffffff8131cef8 tp : ff60000080b96400 t0 : ff2000000088baf8 [25469.032285] t1 : fffffffffffffffc t2 : 5249207570637265 s0 : ff2000000088bd90 [25469.032329] s1 : ff60000098b21080 a0 : 037d527a15eb4f00 a1 : 037d527a15eb4f00 [25469.032372] a2 : 0000000000000023 a3 : 0000000000000001 a4 : ffffffff8122dbf8 [25469.032410] a5 : 0000000000000fff a6 : 0000000000000000 a7 : ffffffff8122dc10 [25469.032448] s2 : ff60000080c22eb0 s3 : 0000000200000022 s4 : 000000000000001f [25469.032488] s5 : ff60000080c22e00 s6 : ffffffff80c351c0 s7 : 0000000000000000 [25469.032582] s8 : 0000000000000003 s9 : 000055556b7fb490 s10: 00007ffff0e12fa0 [25469.032621] s11: 00007ffff0e13e9a t3 : ffffffff81354ac7 t4 : ffffffff81354ac7 [25469.032664] t5 : ffffffff81354ac8 t6 : ffffffff81354ac7 [25469.032698] status: 0000000200000100 badaddr: ffffffff8007db1e cause: 0000000000000003 [25469.032738] [<ffffffff8007db1e>] __free_percpu_irq+0xa2/0x150 [25469.032797] [<ffffffff8007dbfc>] free_percpu_irq+0x30/0x5e [25469.032856] [<ffffffff013a57dc>] kvm_riscv_aia_exit+0x40/0x42 [kvm] [25469.033947] [<ffffffff013b4e82>] cleanup_module+0x10/0x32 [kvm] [25469.035300] [<ffffffff8009b150>] __riscv_sys_delete_module+0x18e/0x1fc [25469.035374] [<ffffffff8000c1ca>] syscall_handler+0x3a/0x46 [25469.035456] [<ffffffff809ec9a4>] do_trap_ecall_u+0x72/0x134 [25469.035536] [<ffffffff809f5e18>] handle_exception+0x148/0x156 Invoke aia_exit and other arch specific cleanup functions after kvm_exit so that disable gets a chance to be called first before exit. | |||||
| CVE-2025-23130 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid panic once fallocation fails for pinfile syzbot reports a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2746! CPU: 0 UID: 0 PID: 5323 Comm: syz.0.0 Not tainted 6.13.0-rc2-syzkaller-00018-g7cb1b4663150 #0 RIP: 0010:get_new_segment fs/f2fs/segment.c:2746 [inline] RIP: 0010:new_curseg+0x1f52/0x1f70 fs/f2fs/segment.c:2876 Call Trace: <TASK> __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3210 f2fs_allocate_new_section fs/f2fs/segment.c:3224 [inline] f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3238 f2fs_expand_inode_data+0x696/0xca0 fs/f2fs/file.c:1830 f2fs_fallocate+0x537/0xa10 fs/f2fs/file.c:1940 vfs_fallocate+0x569/0x6e0 fs/open.c:327 do_vfs_ioctl+0x258c/0x2e40 fs/ioctl.c:885 __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x80/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Concurrent pinfile allocation may run out of free section, result in panic in get_new_segment(), let's expand pin_sem lock coverage to include f2fs_gc(), so that we can make sure to reclaim enough free space for following allocation. In addition, do below changes to enhance error path handling: - call f2fs_bug_on() only in non-pinfile allocation path in get_new_segment(). - call reset_curseg_fields() to reset all fields of curseg in new_curseg() | |||||
| CVE-2025-23041 | 1 Umbraco | 1 Umbraco Forms | 2026-06-17 | N/A | 5.8 MEDIUM |
| Umbraco.Forms is a web form framework written for the nuget ecosystem. Character limits configured by editors for short and long answer fields are validated only client-side, not server-side. This issue has been patched in versions 8.13.16, 10.5.7, 13.2.2, and 14.1.2. Users are advised to upgrade. There are no known workarounds for this issue. | |||||
| CVE-2025-23024 | 1 Glpi-project | 1 Glpi | 2026-06-17 | N/A | 4.3 MEDIUM |
| GLPI is a free asset and IT management software package. Starting in version 0.72 and prior to version 10.0.18, an anonymous user can disable all the active plugins. Version 10.0.18 contains a patch. As a workaround, one may delete the `install/update.php` file. | |||||
| CVE-2025-22395 | 1 Dell | 1 Update Package Framework | 2026-06-17 | N/A | 8.2 HIGH |
| Dell Update Package Framework, versions prior to 22.01.02, contain(s) a Local Privilege Escalation Vulnerability. A local low privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary remote scripts on the server. Exploitation may lead to a denial of service by an attacker. | |||||
| CVE-2025-22175 | 1 Atlassian | 1 Jira Align | 2026-06-17 | N/A | 5.4 MEDIUM |
| Jira Align is vulnerable to an authorization issue. A low-privilege user can access unexpected endpoints that disclose a small amount of sensitive information. For example, a low-level user was able to modify the steps of another user's private checklist. | |||||
| CVE-2025-22168 | 1 Atlassian | 1 Jira Align | 2026-06-17 | N/A | 4.3 MEDIUM |
| Jira Align is vulnerable to an authorization issue. A low-privilege user can access unexpected endpoints that disclose a small amount of sensitive information. For example, a low-level user was able to read the steps of another user's private checklist. | |||||
| CVE-2025-22128 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Clear affinity hint before calling ath12k_pci_free_irq() in error path If a shared IRQ is used by the driver due to platform limitation, then the IRQ affinity hint is set right after the allocation of IRQ vectors in ath12k_pci_msi_alloc(). This does no harm unless one of the functions requesting the IRQ fails and attempt to free the IRQ. This may end up with a warning from the IRQ core that is expecting the affinity hint to be cleared before freeing the IRQ: kernel/irq/manage.c: /* make sure affinity_hint is cleaned up */ if (WARN_ON_ONCE(desc->affinity_hint)) desc->affinity_hint = NULL; So to fix this issue, clear the IRQ affinity hint before calling ath12k_pci_free_irq() in the error path. The affinity will be cleared once again further down the error path due to code organization, but that does no harm. | |||||
| CVE-2025-22125 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: don't ignore IO flags If blk-wbt is enabled by default, it's found that raid write performance is quite bad because all IO are throttled by wbt of underlying disks, due to flag REQ_IDLE is ignored. And turns out this behaviour exist since blk-wbt is introduced. Other than REQ_IDLE, other flags should not be ignored as well, for example REQ_META can be set for filesystems, clearing it can cause priority reverse problems; And REQ_NOWAIT should not be cleared as well, because io will wait instead of failing directly in underlying disks. Fix those problems by keep IO flags from master bio. Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT") | |||||
| CVE-2025-22122 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: block: fix adding folio to bio >4GB folio is possible on some ARCHs, such as aarch64, 16GB hugepage is supported, then 'offset' of folio can't be held in 'unsigned int', cause warning in bio_add_folio_nofail() and IO failure. Fix it by adjusting 'page' & trimming 'offset' so that `->bi_offset` won't be overflow, and folio can be added to bio successfully. | |||||
| CVE-2025-22120 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: goto right label 'out_mmap_sem' in ext4_setattr() Otherwise, if ext4_inode_attach_jinode() fails, a hung task will happen because filemap_invalidate_unlock() isn't called to unlock mapping->invalidate_lock. Like this: EXT4-fs error (device sda) in ext4_setattr:5557: Out of memory INFO: task fsstress:374 blocked for more than 122 seconds. Not tainted 6.14.0-rc1-next-20250206-xfstests-dirty #726 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:fsstress state:D stack:0 pid:374 tgid:374 ppid:373 task_flags:0x440140 flags:0x00000000 Call Trace: <TASK> __schedule+0x2c9/0x7f0 schedule+0x27/0xa0 schedule_preempt_disabled+0x15/0x30 rwsem_down_read_slowpath+0x278/0x4c0 down_read+0x59/0xb0 page_cache_ra_unbounded+0x65/0x1b0 filemap_get_pages+0x124/0x3e0 filemap_read+0x114/0x3d0 vfs_read+0x297/0x360 ksys_read+0x6c/0xe0 do_syscall_64+0x4b/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2025-22116 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: idpf: check error for register_netdev() on init Current init logic ignores the error code from register_netdev(), which will cause WARN_ON() on attempt to unregister it, if there was one, and there is no info for the user that the creation of the netdev failed. WARNING: CPU: 89 PID: 6902 at net/core/dev.c:11512 unregister_netdevice_many_notify+0x211/0x1a10 ... [ 3707.563641] unregister_netdev+0x1c/0x30 [ 3707.563656] idpf_vport_dealloc+0x5cf/0xce0 [idpf] [ 3707.563684] idpf_deinit_task+0xef/0x160 [idpf] [ 3707.563712] idpf_vc_core_deinit+0x84/0x320 [idpf] [ 3707.563739] idpf_remove+0xbf/0x780 [idpf] [ 3707.563769] pci_device_remove+0xab/0x1e0 [ 3707.563786] device_release_driver_internal+0x371/0x530 [ 3707.563803] driver_detach+0xbf/0x180 [ 3707.563816] bus_remove_driver+0x11b/0x2a0 [ 3707.563829] pci_unregister_driver+0x2a/0x250 Introduce an error check and log the vport number and error code. On removal make sure to check VPORT_REG_NETDEV flag prior to calling unregister and free on the netdev. Add local variables for idx, vport_config and netdev for readability. | |||||
| CVE-2025-22113 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi->s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi->s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here. | |||||
| CVE-2025-22106 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vmxnet3: unregister xdp rxq info in the reset path vmxnet3 does not unregister xdp rxq info in the vmxnet3_reset_work() code path as vmxnet3_rq_destroy() is not invoked in this code path. So, we get below message with a backtrace. Missing unregister, handled but fix driver WARNING: CPU:48 PID: 500 at net/core/xdp.c:182 __xdp_rxq_info_reg+0x93/0xf0 This patch fixes the problem by moving the unregister code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup(). | |||||
| CVE-2025-22105 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bonding: check xdp prog when set bond mode Following operations can trigger a warning[1]: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode balance-rr ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp ip netns exec ns1 ip link set bond0 type bond mode broadcast ip netns del ns1 When delete the namespace, dev_xdp_uninstall() is called to remove xdp program on bond dev, and bond_xdp_set() will check the bond mode. If bond mode is changed after attaching xdp program, the warning may occur. Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode with xdp program attached is not good. Add check for xdp program when set bond mode. [1] ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at net/core/dev.c:9912 unregister_netdevice_many_notify+0x8d9/0x930 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u4:0 Not tainted 6.14.0-rc4 #107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:unregister_netdevice_many_notify+0x8d9/0x930 Code: 00 00 48 c7 c6 6f e3 a2 82 48 c7 c7 d0 b3 96 82 e8 9c 10 3e ... RSP: 0018:ffffc90000063d80 EFLAGS: 00000282 RAX: 00000000ffffffa1 RBX: ffff888004959000 RCX: 00000000ffffdfff RDX: 0000000000000000 RSI: 00000000ffffffea RDI: ffffc90000063b48 RBP: ffffc90000063e28 R08: ffffffff82d39b28 R09: 0000000000009ffb R10: 0000000000000175 R11: ffffffff82d09b40 R12: ffff8880049598e8 R13: 0000000000000001 R14: dead000000000100 R15: ffffc90000045000 FS: 0000000000000000(0000) GS:ffff888007a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000d406b60 CR3: 000000000483e000 CR4: 00000000000006f0 Call Trace: <TASK> ? __warn+0x83/0x130 ? unregister_netdevice_many_notify+0x8d9/0x930 ? report_bug+0x18e/0x1a0 ? handle_bug+0x54/0x90 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? unregister_netdevice_many_notify+0x8d9/0x930 ? bond_net_exit_batch_rtnl+0x5c/0x90 cleanup_net+0x237/0x3d0 process_one_work+0x163/0x390 worker_thread+0x293/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0xec/0x1e0 ? __pfx_kthread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2025-22096 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/gem: Fix error code msm_parse_deps() The SUBMIT_ERROR() macro turns the error code negative. This extra '-' operation turns it back to positive EINVAL again. The error code is passed to ERR_PTR() and since positive values are not an IS_ERR() it eventually will lead to an oops. Delete the '-'. Patchwork: https://patchwork.freedesktop.org/patch/637625/ | |||||
| CVE-2025-22078 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: staging: vchiq_arm: Fix possible NPR of keep-alive thread In case vchiq_platform_conn_state_changed() is never called or fails before driver removal, ka_thread won't be a valid pointer to a task_struct. So do the necessary checks before calling kthread_stop to avoid a crash. | |||||
| CVE-2025-22076 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix missing shutdown check xfstests generic/730 test failed because after deleting the device that still had dirty data, the file could still be read without returning an error. The reason is the missing shutdown check in ->read_iter. I also noticed that shutdown checks were missing from ->write_iter, ->splice_read, and ->mmap. This commit adds shutdown checks to all of them. | |||||
| CVE-2025-22075 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rtnetlink: Allocate vfinfo size for VF GUIDs when supported Commit 30aad41721e0 ("net/core: Add support for getting VF GUIDs") added support for getting VF port and node GUIDs in netlink ifinfo messages, but their size was not taken into consideration in the function that allocates the netlink message, causing the following warning when a netlink message is filled with many VF port and node GUIDs: # echo 64 > /sys/bus/pci/devices/0000\:08\:00.0/sriov_numvfs # ip link show dev ib0 RTNETLINK answers: Message too long Cannot send link get request: Message too long Kernel warning: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1930 at net/core/rtnetlink.c:4151 rtnl_getlink+0x586/0x5a0 Modules linked in: xt_conntrack xt_MASQUERADE nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay mlx5_ib macsec mlx5_core tls rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm iw_cm ib_ipoib fuse ib_cm ib_core CPU: 2 UID: 0 PID: 1930 Comm: ip Not tainted 6.14.0-rc2+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:rtnl_getlink+0x586/0x5a0 Code: cb 82 e8 3d af 0a 00 4d 85 ff 0f 84 08 ff ff ff 4c 89 ff 41 be ea ff ff ff e8 66 63 5b ff 49 c7 07 80 4f cb 82 e9 36 fc ff ff <0f> 0b e9 16 fe ff ff e8 de a0 56 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ffff888113557348 EFLAGS: 00010246 RAX: 00000000ffffffa6 RBX: ffff88817e87aa34 RCX: dffffc0000000000 RDX: 0000000000000003 RSI: 0000000000000000 RDI: ffff88817e87afb8 RBP: 0000000000000009 R08: ffffffff821f44aa R09: 0000000000000000 R10: ffff8881260f79a8 R11: ffff88817e87af00 R12: ffff88817e87aa00 R13: ffffffff8563d300 R14: 00000000ffffffa6 R15: 00000000ffffffff FS: 00007f63a5dbf280(0000) GS:ffff88881ee00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f63a5ba4493 CR3: 00000001700fe002 CR4: 0000000000772eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0xa5/0x230 ? rtnl_getlink+0x586/0x5a0 ? report_bug+0x22d/0x240 ? handle_bug+0x53/0xa0 ? exc_invalid_op+0x14/0x50 ? asm_exc_invalid_op+0x16/0x20 ? skb_trim+0x6a/0x80 ? rtnl_getlink+0x586/0x5a0 ? __pfx_rtnl_getlink+0x10/0x10 ? rtnetlink_rcv_msg+0x1e5/0x860 ? __pfx___mutex_lock+0x10/0x10 ? rcu_is_watching+0x34/0x60 ? __pfx_lock_acquire+0x10/0x10 ? stack_trace_save+0x90/0xd0 ? filter_irq_stacks+0x1d/0x70 ? kasan_save_stack+0x30/0x40 ? kasan_save_stack+0x20/0x40 ? kasan_save_track+0x10/0x30 rtnetlink_rcv_msg+0x21c/0x860 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e ? __pfx_rtnetlink_rcv_msg+0x10/0x10 ? arch_stack_walk+0x9e/0xf0 ? rcu_is_watching+0x34/0x60 ? lock_acquire+0xd5/0x410 ? rcu_is_watching+0x34/0x60 netlink_rcv_skb+0xe0/0x210 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 ? __pfx_netlink_rcv_skb+0x10/0x10 ? rcu_is_watching+0x34/0x60 ? __pfx___netlink_lookup+0x10/0x10 ? lock_release+0x62/0x200 ? netlink_deliver_tap+0xfd/0x290 ? rcu_is_watching+0x34/0x60 ? lock_release+0x62/0x200 ? netlink_deliver_tap+0x95/0x290 netlink_unicast+0x31f/0x480 ? __pfx_netlink_unicast+0x10/0x10 ? rcu_is_watching+0x34/0x60 ? lock_acquire+0xd5/0x410 netlink_sendmsg+0x369/0x660 ? lock_release+0x62/0x200 ? __pfx_netlink_sendmsg+0x10/0x10 ? import_ubuf+0xb9/0xf0 ? __import_iovec+0x254/0x2b0 ? lock_release+0x62/0x200 ? __pfx_netlink_sendmsg+0x10/0x10 ____sys_sendmsg+0x559/0x5a0 ? __pfx_____sys_sendmsg+0x10/0x10 ? __pfx_copy_msghdr_from_user+0x10/0x10 ? rcu_is_watching+0x34/0x60 ? do_read_fault+0x213/0x4a0 ? rcu_is_watching+0x34/0x60 ___sys_sendmsg+0xe4/0x150 ? __pfx____sys_sendmsg+0x10/0x10 ? do_fault+0x2cc/0x6f0 ? handle_pte_fault+0x2e3/0x3d0 ? __pfx_handle_pte_fault+0x10/0x10 ---truncated--- | |||||