Total
36333 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-45860 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: increase the connection clean up limit to 64 After the optimization to only perform one GC per jiffy, a new problem was introduced. If more than 8 new connections are tracked per jiffy the list won't be cleaned up fast enough possibly reaching the limit wrongly. In order to prevent this issue, only skip the GC if it was already triggered during the same jiffy and the increment is lower than the clean up limit. In addition, increase the clean up limit to 64 connections to avoid triggering GC too often and do more effective GCs. This has been tested using a HTTP server and several performance tools while having nft_connlimit/xt_connlimit or OVS limit configured. Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YES | |||||
| CVE-2026-45862 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush cache for PASID table before using it When writing the address of a freshly allocated zero-initialized PASID table to a PASID directory entry, do that after the CPU cache flush for this PASID table, not before it, to avoid the time window when this PASID table may be already used by non-coherent IOMMU hardware while its contents in RAM is still some random old data, not zero-initialized. | |||||
| CVE-2026-45865 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mctp i2c: initialise event handler read bytes Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads will return "val" from the i2c bus driver. For i2c-aspeed and i2c-npcm7xx that is a stack uninitialised u8. Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c instance, now it returns all 0xff. | |||||
| CVE-2026-45871 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tpm: st33zp24: Fix missing cleanup on get_burstcount() error get_burstcount() can return -EBUSY on timeout. When this happens, st33zp24_send() returns directly without releasing the locality acquired earlier. Use goto out_err to ensure proper cleanup when get_burstcount() fails. | |||||
| CVE-2026-45873 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets Userspace provides an optimized representation in case intervals are adjacent, where the end element is omitted. The existing partial overlap detection logic skips anonymous set checks on start elements for this reason. However, it is possible to add intervals that overlap to this anonymous where two start elements with the same, eg. A-B, A-C where C < B. start end A B start end A C Restore the check on overlapping start elements to report an overlap. | |||||
| CVE-2025-71304 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: smack: /smack/doi: accept previously used values Writing to /smack/doi a value that has ever been written there in the past disables networking for non-ambient labels. E.g. # cat /smack/doi 3 # netlabelctl -p cipso list Configured CIPSO mappings (1) DOI value : 3 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (3) domain: "_" (IPv4) protocol: UNLABELED domain: DEFAULT (IPv4) protocol: CIPSO, DOI = 3 domain: DEFAULT (IPv6) protocol: UNLABELED # cat /smack/ambient _ # cat /proc/$$/attr/smack/current _ # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms # echo foo >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms unknown option 86 # echo 4 >/smack/doi # echo 3 >/smack/doi !> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17 # echo 3 >/smack/doi !> [ 249.402261] smk_cipso_doi:678 remove rc = -2 !> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17 # ping -c1 10.1.95.12 !!> ping: 10.1.95.12: Address family for hostname not supported # echo _ >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms This happens because Smack keeps decommissioned DOIs, fails to re-add them, and consequently refuses to add the “default” domain map: # netlabelctl -p cipso list Configured CIPSO mappings (2) DOI value : 3 mapping type : PASS_THROUGH DOI value : 4 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (2) domain: "_" (IPv4) protocol: UNLABELED !> (no ipv4 map for default domain here) domain: DEFAULT (IPv6) protocol: UNLABELED Fix by clearing decommissioned DOI definitions and serializing concurrent DOI updates with a new lock. Also: - allow /smack/doi to live unconfigured, since adding a map (netlbl_cfg_cipsov4_map_add) may fail. CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI - add new DOI before removing the old default map, so the old map remains if the add fails (2008-02-04, Casey Schaufler) | |||||
| CVE-2025-71305 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/display/dp_mst: Add protection against 0 vcpi When releasing a timeslot there is a slight chance we may end up with the wrong payload mask due to overflow if the delayed_destroy_work ends up coming into play after a DP 2.1 monitor gets disconnected which causes vcpi to become 0 then we try to make the payload = ~BIT(vcpi - 1) which is a negative shift. VCPI id should never really be 0 hence skip changing the payload mask if VCPI is 0. Otherwise it leads to <7> [515.287237] xe 0000:03:00.0: [drm:drm_dp_mst_get_port_malloc [drm_display_helper]] port ffff888126ce9000 (3) <4> [515.287267] -----------[ cut here ]----------- <3> [515.287268] UBSAN: shift-out-of-bounds in ../drivers/gpu/drm/display/drm_dp_mst_topology.c:4575:36 <3> [515.287271] shift exponent -1 is negative <4> [515.287275] CPU: 7 UID: 0 PID: 3108 Comm: kworker/u64:33 Tainted: G S U 6.17.0-rc6-lgci-xe-xe-3795-3e79699fa1b216e92+ #1 PREEMPT(voluntary) <4> [515.287279] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER <4> [515.287279] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 1645 03/15/2024 <4> [515.287281] Workqueue: drm_dp_mst_wq drm_dp_delayed_destroy_work [drm_display_helper] <4> [515.287303] Call Trace: <4> [515.287304] <TASK> <4> [515.287306] dump_stack_lvl+0xc1/0xf0 <4> [515.287313] dump_stack+0x10/0x20 <4> [515.287316] __ubsan_handle_shift_out_of_bounds+0x133/0x2e0 <4> [515.287324] ? drm_atomic_get_private_obj_state+0x186/0x1d0 <4> [515.287333] drm_dp_atomic_release_time_slots.cold+0x17/0x3d [drm_display_helper] <4> [515.287355] mst_connector_atomic_check+0x159/0x180 [xe] <4> [515.287546] drm_atomic_helper_check_modeset+0x4d9/0xfa0 <4> [515.287550] ? __ww_mutex_lock.constprop.0+0x6f/0x1a60 <4> [515.287562] intel_atomic_check+0x119/0x2b80 [xe] <4> [515.287740] ? find_held_lock+0x31/0x90 <4> [515.287747] ? lock_release+0xce/0x2a0 <4> [515.287754] drm_atomic_check_only+0x6a2/0xb40 <4> [515.287758] ? drm_atomic_add_affected_connectors+0x12b/0x140 <4> [515.287765] drm_atomic_commit+0x6e/0xf0 <4> [515.287766] ? _pfx__drm_printfn_info+0x10/0x10 <4> [515.287774] drm_client_modeset_commit_atomic+0x25c/0x2b0 <4> [515.287794] drm_client_modeset_commit_locked+0x60/0x1b0 <4> [515.287795] ? mutex_lock_nested+0x1b/0x30 <4> [515.287801] drm_client_modeset_commit+0x26/0x50 <4> [515.287804] __drm_fb_helper_restore_fbdev_mode_unlocked+0xdc/0x110 <4> [515.287810] drm_fb_helper_hotplug_event+0x120/0x140 <4> [515.287814] drm_fbdev_client_hotplug+0x28/0xd0 <4> [515.287819] drm_client_hotplug+0x6c/0xf0 <4> [515.287824] drm_client_dev_hotplug+0x9e/0xd0 <4> [515.287829] drm_kms_helper_hotplug_event+0x1a/0x30 <4> [515.287834] drm_dp_delayed_destroy_work+0x3df/0x410 [drm_display_helper] <4> [515.287861] process_one_work+0x22b/0x6f0 <4> [515.287874] worker_thread+0x1e8/0x3d0 <4> [515.287879] ? __pfx_worker_thread+0x10/0x10 <4> [515.287882] kthread+0x11c/0x250 <4> [515.287886] ? __pfx_kthread+0x10/0x10 <4> [515.287890] ret_from_fork+0x2d7/0x310 <4> [515.287894] ? __pfx_kthread+0x10/0x10 <4> [515.287897] ret_from_fork_asm+0x1a/0x30 | |||||
| CVE-2026-45850 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: skip ipv6 extension headers for csum checks Protocol checksum validation fails for IPv6 if there are extension headers before the protocol header. iph->len already contains its offset, so use it to fix the problem. | |||||
| CVE-2026-33813 | 1 Golang | 1 Image | 2026-06-25 | N/A | 7.5 HIGH |
| Parsing a WEBP image with an invalid, large size panics on 32-bit platforms. | |||||
| CVE-2022-24291 | 1 Hp | 136 Laserjet Pro M304-m305 W1a46a, Laserjet Pro M304-m305 W1a46a Firmware, Laserjet Pro M304-m305 W1a47a and 133 more | 2026-06-25 | 7.8 HIGH | 7.5 HIGH |
| Certain HP Print devices may be vulnerable to potential information disclosure, denial of service, or remote code execution. | |||||
| CVE-2022-24293 | 1 Hp | 136 Laserjet Pro M304-m305 W1a46a, Laserjet Pro M304-m305 W1a46a Firmware, Laserjet Pro M304-m305 W1a47a and 133 more | 2026-06-25 | 10.0 HIGH | 9.8 CRITICAL |
| Certain HP Print devices may be vulnerable to potential information disclosure, denial of service, or remote code execution. | |||||
| CVE-2022-24292 | 1 Hp | 136 Laserjet Pro M304-m305 W1a46a, Laserjet Pro M304-m305 W1a46a Firmware, Laserjet Pro M304-m305 W1a47a and 133 more | 2026-06-25 | 10.0 HIGH | 9.8 CRITICAL |
| Certain HP Print devices may be vulnerable to potential information disclosure, denial of service, or remote code execution. | |||||
| CVE-2026-45931 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Hold mm structure across iommu_sva_unbind_device() Some tests trigger a crash in iommu_sva_unbind_device() due to accessing iommu_mm after the associated mm structure has been freed. Fix this by taking an explicit reference to the mm structure after successfully binding the device, and releasing it only after the device is unbound. This ensures the mm remains valid for the entire SVA bind/unbind lifetime. | |||||
| CVE-2026-45930 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: mctp: ensure our nlmsg responses are initialised Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from DEVCORE Research Team working with Trend Micro Zero Day Initiative report that a RTM_GETNEIGH will return uninitalised data in the pad bytes of the ndmsg data. Ensure we're initialising the netlink data to zero, in the link, addr and neigh response messages. | |||||
| CVE-2026-46131 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: check for nEPT/nNPT in slow flush hypercalls Checking is_guest_mode(vcpu) is incorrect, because translate_nested_gpa() is only valid if an L2 guest is running *with nested EPT/NPT enabled*. Instead use the same condition as translate_nested_gpa() itself. | |||||
| CVE-2026-45915 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fat: avoid parent link count underflow in rmdir Corrupted FAT images can leave a directory inode with an incorrect i_nlink (e.g. 2 even though subdirectories exist). rmdir then unconditionally calls drop_nlink(dir) and can drive i_nlink to 0, triggering the WARN_ON in drop_nlink(). Add a sanity check in vfat_rmdir() and msdos_rmdir(): only drop the parent link count when it is at least 3, otherwise report a filesystem error. | |||||
| CVE-2026-45917 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: do not keep dest_dst if dev is going down There is race between the netdev notifier ip_vs_dst_event() and the code that caches dst with dev that is going down. As the FIB can be notified for the closed device after our handler finishes, it is possible valid route to be returned and cached resuling in a leaked dev reference until the dest is not removed. To prevent new dest_dst to be attached to dest just after the handler dropped the old one, add a netif_running() check to make sure the notifier handler is not currently running for device that is closing. | |||||
| CVE-2026-45923 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: catc: enable basic endpoint checking catc_probe() fills three URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX - usb_rcvintpipe(usbdev, 2) for interrupt status A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a catc_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls after usb_set_interface() to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time. Similar to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") which fixed the issue in rtl8150. | |||||
| CVE-2026-46077 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-tdes - fix DMA sync direction Before DMA output is consumed by the CPU, ->dma_addr_out must be synced with dma_sync_single_for_cpu() instead of dma_sync_single_for_device(). Using the wrong direction can return stale cache data on non-coherent platforms. | |||||
| CVE-2026-46080 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: split transactions in dio completion to avoid credit exhaustion During ocfs2 dio operations, JBD2 may report warnings via following call trace: ocfs2_dio_end_io_write ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_try_to_merge_extent ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2__journal_restart start_this_handle output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449 To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to handle extents in a batch of transaction. Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode should only be removed from the orphan list after the extent tree update is complete. This ensures that if a crash occurs in the middle of extent tree updates, we won't leave stale blocks beyond EOF. This patch also changes the logic for updating the inode size and removing orphan, making it similar to ext4_dio_write_end_io(). Both operations are performed only when everything looks good. Finally, thanks to Jans and Joseph for providing the bug fix prototype and suggestions. | |||||