Total
11517 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-94272 | 2026-10-19 | N/A | 5.3 MEDIUM | ||
| The Snap Finance WordPress plugin before 3.12.0 does not verify that a request to change a WooCommerce order's status comes from an authorised source, allowing unauthenticated attackers to move any order into a paid state or force it to fail. | |||||
| CVE-2026-94228 | 2026-10-19 | N/A | 5.3 MEDIUM | ||
| The TrueBooker WordPress plugin before 1.3.0 does not perform any capability check on one of its setup handlers, and the token it does check is issued to unauthenticated visitors, allowing anyone to overwrite the plugin's entire configuration and to discard any setting they do not supply. | |||||
| CVE-2026-111439 | 2026-10-19 | N/A | 4.3 MEDIUM | ||
| 在 openGauss-server的 src/common/backend/utils/adt/genfile.cpp 模块中，内置函数 pg_read_binary_file_blocks() 存在权限校验逻辑缺陷。该函数在入口处仅校验了起始块号（startBlockNum）和块数量（blockCount）的范围，随后直接调用底层文件读取例程 ReadBinaryFileBlocksFirstCall()。该底层例程仅执行了路径规范化检查以及针对 .. 路径遍历和数据目录边界的基本检查，缺失了对调用者数据库权限（如 SELECT 权限）的校验。此外，辅助函数 is_row_data_file() 也仅用于识别文件形态，未包含权限检查。因此，任何拥有普通数据库连接权限的用户，只要能够通过 pg_relation_filepath() 等函数获取到目标表的底层关系文件路径（例如压缩数据的 _compress 文件路径），即可无需具备该表的 SELECT 权限，直接读取表数据的二进制块。 此漏洞影响此前3.0.0到6.0.0间的所有版本及补丁版，并在7.0.0-LTS版本修复。修复patch详见：https://gitcode.com/opengauss/openGauss-server/pull/9374。 | |||||
| CVE-2026-97859 | 2026-10-19 | N/A | 6.5 MEDIUM | ||
| Seven Gitea API routes under `/api/v1/users/{username}` (followers, following, following/{target}, starred, subscriptions, keys and gpg_keys) were registered without the `individualPermsChecker` middleware that enforces the visibility of the target user. An authenticated user could therefore read the followers, following list, starred and watched repositories and public SSH and GPG keys of a user with limited or private visibility, whom they could not otherwise see. The issue was fixed in 1.27.3 and 28.0.0 and disclosed with 28.2.0. | |||||
| CVE-2026-67218 | 1 Broadcom | 1 Rabbitmq Server | 2026-10-19 | N/A | 6.5 MEDIUM |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0, accept_content/2 at line 56 calls rabbit_stream_manager:create_super_stream/... directly after is_authorized (which only checks the management tag + vhost access via is_authorized_vhost). The stream-protocol equivalent (rabbit_stream_reader.erl create_super_stream handler) calls rabbit_stream_utils:check_super_stream_management_permitted/4 which enforces configure on the exchange and each partition queue. The HTTP handler omits this call entirely. A user with management tag and vhost access , but no configure permission on any resource , can create super-streams (an exchange + N partition stream queues + bindings) via the HTTP API. The native stream-protocol path enforces configure on each resource; the HTTP path does not, creating a privilege escalation from 'can view' to 'can create persistent cluster-wide resources.' Preconditions include rabbitmq_stream_management plugin enabled management tag + vhost access (no resource permissions needed). This issue is fixed in versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0. | |||||
| CVE-2026-66075 | 1 Broadcom | 1 Rabbitmq Server | 2026-10-19 | N/A | 5.4 MEDIUM |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, is_authorized/2 for the /federation-links/.../restart route uses is_authorized_monitor (accepts the monitoring tag), while allowed_methods permits DELETE and delete_resource/2 triggers rabbit_federation_link_sup:restart. There is no per-method elevation check and no comment marking it intentional. A read-only monitoring user can restart any federation link , a state-changing operation that disrupts message flow. Preconditions include rabbitmq_federation + rabbitmq_federation_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. | |||||
| CVE-2026-66076 | 1 Broadcom | 1 Rabbitmq Server | 2026-10-19 | N/A | 6.5 MEDIUM |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, is_authorized/2 calls rabbit_mgmt_util:is_authorized/2, which checks only the management tag, instead of is_authorized_vhost/2. The /api/queues/quorum/:vhost/:queue/status handler reads the vhost from the path without checking that the user can access it. Any management-tagged user can therefore read Raft status, including leader, members, term, and commit index, for quorum queues in inaccessible vhosts, exposing cross-tenant queue names and cluster topology. The management plugin must be enabled and the attacker must have a management tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. | |||||
| CVE-2026-46174 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache Make sure resources are not improperly shared in the op cache and cause instruction corruption this way. | |||||
| CVE-2026-46054 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: selinux: fix overlayfs mmap() and mprotect() access checks The existing SELinux security model for overlayfs is to allow access if the current task is able to access the top level file (the "user" file) and the mounter's credentials are sufficient to access the lower level file (the "backing" file). Unfortunately, the current code does not properly enforce these access controls for both mmap() and mprotect() operations on overlayfs filesystems. This patch makes use of the newly created security_mmap_backing_file() LSM hook to provide the missing backing file enforcement for mmap() operations, and leverages the backing file API and new LSM blob to provide the necessary information to properly enforce the mprotect() access controls. | |||||
| CVE-2026-31788 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.2 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: restrict usage in unprivileged domU The Xen privcmd driver allows to issue arbitrary hypercalls from user space processes. This is normally no problem, as access is usually limited to root and the hypervisor will deny any hypercalls affecting other domains. In case the guest is booted using secure boot, however, the privcmd driver would be enabling a root user process to modify e.g. kernel memory contents, thus breaking the secure boot feature. The only known case where an unprivileged domU is really needing to use the privcmd driver is the case when it is acting as the device model for another guest. In this case all hypercalls issued via the privcmd driver will target that other guest. Fortunately the privcmd driver can already be locked down to allow only hypercalls targeting a specific domain, but this mode can be activated from user land only today. The target domain can be obtained from Xenstore, so when not running in dom0 restrict the privcmd driver to that target domain from the beginning, resolving the potential problem of breaking secure boot. This is XSA-482 --- V2: - defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich) - wait in open() if target domain isn't known yet - issue message in case no target domain found (Jan Beulich) | |||||
| CVE-2026-110365 | 2026-10-19 | N/A | 6.5 MEDIUM | ||
| Missing Authorization vulnerability in WPExperts Advanced File Manager file-manager-advanced allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Advanced File Manager: from n/a through 5.4.14. | |||||
| CVE-2026-67233 | 1 Broadcom | 1 Rabbitmq Server | 2026-10-19 | N/A | 7.1 HIGH |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The shovel management resource's is_authorized/2 delegates to rabbit_mgmt_util:is_authorized_monitor/2, which accepts the monitoring tag. But allowed_methods includes DELETE, and delete_resource/2 deletes / restarts shovel runtime parameters with no additional role check. A monitoring user , intended to have read-only visibility , can therefore delete or restart any shovel in any vhost they can see. A read-only monitoring user can delete or restart any dynamic shovel , a state-changing operation that the equivalent /api/parameters endpoint correctly restricts to policymaker. Preconditions include rabbitmq_shovel + rabbitmq_shovel_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. | |||||
| CVE-2026-111839 | 2026-10-19 | N/A | 5.3 MEDIUM | ||
| Missing Authorization vulnerability in VideoWhisper.com Broadcast Live Video videowhisper-live-streaming-integration allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Broadcast Live Video: from n/a through 7.3.7. | |||||
| CVE-2026-111836 | 2026-10-19 | N/A | 4.3 MEDIUM | ||
| Missing Authorization vulnerability in WP ManageNinja LLC FluentCommunity fluent-community allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects FluentCommunity: from n/a through 2.11.0. | |||||
| CVE-2026-110880 | 2026-10-19 | N/A | 6.5 MEDIUM | ||
| Missing Authorization vulnerability in Kit Kit (formerly ConvertKit) convertkit allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Kit (formerly ConvertKit): from n/a through 3.4.6. | |||||
| CVE-2026-110363 | 2026-10-19 | N/A | 5.4 MEDIUM | ||
| Missing Authorization vulnerability in ThimPress LearnPress learnpress allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects LearnPress: from n/a through 4.4.10. | |||||
| CVE-2025-68764 | 2026-10-19 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: NFS: Automounted filesystems should inherit ro,noexec,nodev,sync flags When a filesystem is being automounted, it needs to preserve the user-set superblock mount options, such as the "ro" flag. | |||||
| CVE-2026-112178 | 2026-10-19 | N/A | N/A | ||
| MISP contains an access control flaw in the proposal (shadow attribute) visibility logic. The authorization check accepted any attribute or object carrying one of the user's sharing groups without verifying the distribution level, and denied the owning organisation access to proposals on its own organisation-only attributes. - A user belonging to a sharing group could view proposals on attributes or objects with that sharing group, regardless of the attribute's distribution level (levels 1-3 should restrict visibility) - The owning organisation could not view proposals on its own org-only attributes Security impact: Unauthorized disclosure of proposed attribute changes to users who should not have access based on distribution level restrictions. Affected: <2.5.48 | |||||
| CVE-2026-112033 | 2026-10-19 | 5.0 MEDIUM | 4.3 MEDIUM | ||
| A security flaw has been discovered in aircheng-org iWebShop-5 up to 5.16. The affected element is the function admin_repwd/admin_repwd_act of the file controllers/system.php of the component Password Change. The manipulation of the argument password/repassword results in cross-site request forgery. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | |||||
| CVE-2026-111988 | 2026-10-19 | 5.0 MEDIUM | 4.3 MEDIUM | ||
| A security flaw has been discovered in dyad-sh dyad up to 1.16.0. Affected by this issue is some unknown functionality of the component OAuth Callback Handler. Performing a manipulation results in cross-site request forgery. The attack may be initiated remotely. Upgrading to version 1.17.0-beta.1 can resolve this issue. The patch is named 39fbae87b38573616a1a3b152cdb292787bb1109. It is advisable to upgrade the affected component. | |||||