Total
937 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-1108 | 2 Netapp, Redhat | 17 Oncommand Workflow Automation, Build Of Quarkus, Decision Manager and 14 more | 2026-06-17 | N/A | 7.5 HIGH |
| A flaw was found in undertow. This issue makes achieving a denial of service possible due to an unexpected handshake status updated in SslConduit, where the loop never terminates. | |||||
| CVE-2023-0437 | 1 Mongodb | 1 C Driver | 2026-06-17 | N/A | 5.3 MEDIUM |
| When calling bson_utf8_validate on some inputs a loop with an exit condition that cannot be reached may occur, i.e. an infinite loop. This issue affects All MongoDB C Driver versions prior to versions 1.25.0. | |||||
| CVE-2022-50008 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: kprobes: don't call disarm_kprobe() for disabled kprobes The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 3. Write 1 to /sys/kernel/debug/kprobes/enabled, which changes kprobes_all_disarmed to false but does not arm the disabled kprobe. # echo 1 > /sys/kernel/debug/kprobes/enabled # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffffffff91345650 k __x64_sys_execve+0x0 [DISABLED][FTRACE] 4. Kill execsnoop, when __disable_kprobe() calls disarm_kprobe() for the disabled kprobe and hits the WARN_ONCE() in __disarm_kprobe_ftrace(). # fg /usr/share/bcc/tools/execsnoop ^C Actually, WARN_ONCE() is fired twice, and __unregister_kprobe_top() misses some cleanups and leaves the aggregated kprobe in the hash table. Then, __unregister_trace_kprobe() initialises tk->rp.kp.list and creates an infinite loop like this. aggregated kprobe.list -> kprobe.list -. ^ | '.__.' In this situation, these commands fall into the infinite loop and result in RCU stall or soft lockup. cat /sys/kernel/debug/kprobes/list : show_kprobe_addr() enters into the infinite loop with RCU. /usr/share/bcc/tools/execsnoop : warn_kprobe_rereg() holds kprobe_mutex, and __get_valid_kprobe() is stuck in the loop. To avoid the issue, make sure we don't call disarm_kprobe() for disabled kprobes. [0] Failed to disarm kprobe-ftrace at __x64_sys_execve+0x0/0x40 (error -2) WARNING: CPU: 6 PID: 2460 at kernel/kprobes.c:1130 __disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Modules linked in: ena CPU: 6 PID: 2460 Comm: execsnoop Not tainted 5.19.0+ #28 Hardware name: Amazon EC2 c5.2xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:__disarm_kprobe_ftrace.isra.19 (kernel/kprobes.c:1129) Code: 24 8b 02 eb c1 80 3d c4 83 f2 01 00 75 d4 48 8b 75 00 89 c2 48 c7 c7 90 fa 0f 92 89 04 24 c6 05 ab 83 01 e8 e4 94 f0 ff <0f> 0b 8b 04 24 eb b1 89 c6 48 c7 c7 60 fa 0f 92 89 04 24 e8 cc 94 RSP: 0018:ffff9e6ec154bd98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff930f7b00 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff921461c5 RDI: 00000000ffffffff RBP: ffff89c504286da8 R08: 0000000000000000 R09: c0000000fffeffff R10: 0000000000000000 R11: ffff9e6ec154bc28 R12: ffff89c502394e40 R13: ffff89c502394c00 R14: ffff9e6ec154bc00 R15: 0000000000000000 FS: 00007fe800398740(0000) GS:ffff89c812d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00057f010 CR3: 0000000103b54006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> __disable_kprobe (kernel/kprobes.c:1716) disable_kprobe (kernel/kprobes.c:2392) __disable_trace_kprobe (kernel/trace/trace_kprobe.c:340) disable_trace_kprobe (kernel/trace/trace_kprobe.c:429) perf_trace_event_unreg.isra.2 (./include/linux/tracepoint.h:93 kernel/trace/trace_event_perf.c:168) perf_kprobe_destroy (kernel/trace/trace_event_perf.c:295) _free_event (kernel/events/core.c:4971) perf_event_release_kernel (kernel/events/core.c:5176) perf_release (kernel/events/core.c:5186) __fput (fs/file_table.c:321) task_work_run (./include/linux/ ---truncated--- | |||||
| CVE-2022-4345 | 1 Wireshark | 1 Wireshark | 2026-06-17 | N/A | 6.3 MEDIUM |
| Infinite loops in the BPv6, OpenFlow, and Kafka protocol dissectors in Wireshark 4.0.0 to 4.0.1 and 3.6.0 to 3.6.9 allows denial of service via packet injection or crafted capture file | |||||
| CVE-2022-4104 | 1 Lepton Project | 1 Lepton | 2026-06-17 | N/A | 5.5 MEDIUM |
| A loop with an unreachable exit condition can be triggered by passing a crafted JPEG file to the Lepton image compression tool, resulting in a denial-of-service. | |||||
| CVE-2022-49097 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Avoid writeback threads getting stuck in mempool_alloc() In a low memory situation, allow the NFS writeback code to fail without getting stuck in infinite loops in mempool_alloc(). | |||||
| CVE-2022-48862 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vhost: fix hung thread due to erroneous iotlb entries In vhost_iotlb_add_range_ctx(), range size can overflow to 0 when start is 0 and last is ULONG_MAX. One instance where it can happen is when userspace sends an IOTLB message with iova=size=uaddr=0 (vhost_process_iotlb_msg). So, an entry with size = 0, start = 0, last = ULONG_MAX ends up in the iotlb. Next time a packet is sent, iotlb_access_ok() loops indefinitely due to that erroneous entry. Call Trace: <TASK> iotlb_access_ok+0x21b/0x3e0 drivers/vhost/vhost.c:1340 vq_meta_prefetch+0xbc/0x280 drivers/vhost/vhost.c:1366 vhost_transport_do_send_pkt+0xe0/0xfd0 drivers/vhost/vsock.c:104 vhost_worker+0x23d/0x3d0 drivers/vhost/vhost.c:372 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Reported by syzbot at: https://syzkaller.appspot.com/bug?extid=0abd373e2e50d704db87 To fix this, do two things: 1. Return -EINVAL in vhost_chr_write_iter() when userspace asks to map a range with size 0. 2. Fix vhost_iotlb_add_range_ctx() to handle the range [0, ULONG_MAX] by splitting it into two entries. | |||||
| CVE-2022-48840 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Fix hang during reboot/shutdown Recent commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") adds a wait-loop at the beginning of iavf_remove() to ensure that port initialization is finished prior unregistering net device. This causes a regression in reboot/shutdown scenario because in this case callback iavf_shutdown() is called and this callback detaches the device, makes it down if it is running and sets its state to __IAVF_REMOVE. Later shutdown callback of associated PF driver (e.g. ice_shutdown) is called. That callback calls among other things sriov_disable() that calls indirectly iavf_remove() (see stack trace below). As the adapter state is already __IAVF_REMOVE then the mentioned loop is end-less and shutdown process hangs. The patch fixes this by checking adapter's state at the beginning of iavf_remove() and skips the rest of the function if the adapter is already in remove state (shutdown is in progress). Reproducer: 1. Create VF on PF driven by ice or i40e driver 2. Ensure that the VF is bound to iavf driver 3. Reboot [52625.981294] sysrq: SysRq : Show Blocked State [52625.988377] task:reboot state:D stack: 0 pid:17359 ppid: 1 f2 [52625.996732] Call Trace: [52625.999187] __schedule+0x2d1/0x830 [52626.007400] schedule+0x35/0xa0 [52626.010545] schedule_hrtimeout_range_clock+0x83/0x100 [52626.020046] usleep_range+0x5b/0x80 [52626.023540] iavf_remove+0x63/0x5b0 [iavf] [52626.027645] pci_device_remove+0x3b/0xc0 [52626.031572] device_release_driver_internal+0x103/0x1f0 [52626.036805] pci_stop_bus_device+0x72/0xa0 [52626.040904] pci_stop_and_remove_bus_device+0xe/0x20 [52626.045870] pci_iov_remove_virtfn+0xba/0x120 [52626.050232] sriov_disable+0x2f/0xe0 [52626.053813] ice_free_vfs+0x7c/0x340 [ice] [52626.057946] ice_remove+0x220/0x240 [ice] [52626.061967] ice_shutdown+0x16/0x50 [ice] [52626.065987] pci_device_shutdown+0x34/0x60 [52626.070086] device_shutdown+0x165/0x1c5 [52626.074011] kernel_restart+0xe/0x30 [52626.077593] __do_sys_reboot+0x1d2/0x210 [52626.093815] do_syscall_64+0x5b/0x1a0 [52626.097483] entry_SYSCALL_64_after_hwframe+0x65/0xca | |||||
| CVE-2022-48780 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: Avoid overwriting the copies of clcsock callback functions The callback functions of clcsock will be saved and replaced during the fallback. But if the fallback happens more than once, then the copies of these callback functions will be overwritten incorrectly, resulting in a loop call issue: clcsk->sk_error_report |- smc_fback_error_report() <------------------------------| |- smc_fback_forward_wakeup() | (loop) |- clcsock_callback() (incorrectly overwritten) | |- smc->clcsk_error_report() ------------------| So this patch fixes the issue by saving these function pointers only once in the fallback and avoiding overwriting. | |||||
| CVE-2022-48635 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 6.2 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fsdax: Fix infinite loop in dax_iomap_rw() I got an infinite loop and a WARNING report when executing a tail command in virtiofs. WARNING: CPU: 10 PID: 964 at fs/iomap/iter.c:34 iomap_iter+0x3a2/0x3d0 Modules linked in: CPU: 10 PID: 964 Comm: tail Not tainted 5.19.0-rc7 Call Trace: <TASK> dax_iomap_rw+0xea/0x620 ? __this_cpu_preempt_check+0x13/0x20 fuse_dax_read_iter+0x47/0x80 fuse_file_read_iter+0xae/0xd0 new_sync_read+0xfe/0x180 ? 0xffffffff81000000 vfs_read+0x14d/0x1a0 ksys_read+0x6d/0xf0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The tail command will call read() with a count of 0. In this case, iomap_iter() will report this WARNING, and always return 1 which casuing the infinite loop in dax_iomap_rw(). Fixing by checking count whether is 0 in dax_iomap_rw(). | |||||
| CVE-2022-48630 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ The commit referenced in the Fixes tag removed the 'break' from the else branch in qcom_rng_read(), causing an infinite loop whenever 'max' is not a multiple of WORD_SZ. This can be reproduced e.g. by running: kcapi-rng -b 67 >/dev/null There are many ways to fix this without adding back the 'break', but they all seem more awkward than simply adding it back, so do just that. Tested on a machine with Qualcomm Amberwing processor. | |||||
| CVE-2022-48256 | 1 Technitium | 1 Dns Server | 2026-06-17 | N/A | 7.5 HIGH |
| Technitium DNS Server before 10.0 allows a self-CNAME denial-of-service attack in which a CNAME loop causes an answer to contain hundreds of records. | |||||
| CVE-2022-46770 | 1 Linuxfoundation | 1 Mirage Firewall | 2026-06-17 | N/A | 7.5 HIGH |
| qubes-mirage-firewall (aka Mirage firewall for QubesOS) 0.8.x through 0.8.3 allows guest OS users to cause a denial of service (CPU consumption and loss of forwarding) via a crafted multicast UDP packet (IP address range of 224.0.0.0 through 239.255.255.255). | |||||
| CVE-2022-46285 | 1 X.org | 1 Libxpm | 2026-06-17 | N/A | 7.5 HIGH |
| A flaw was found in libXpm. This issue occurs when parsing a file with a comment not closed; the end-of-file condition will not be detected, leading to an infinite loop and resulting in a Denial of Service in the application linked to the library. | |||||
| CVE-2022-44617 | 1 X.org | 1 Libxpm | 2026-06-17 | N/A | 7.5 HIGH |
| A flaw was found in libXpm. When processing a file with width of 0 and a very large height, some parser functions will be called repeatedly and can lead to an infinite loop, resulting in a Denial of Service in the application linked to the library. | |||||
| CVE-2022-42721 | 3 Debian, Fedoraproject, Linux | 3 Debian Linux, Fedora, Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| A list management bug in BSS handling in the mac80211 stack in the Linux kernel 5.1 through 5.19.x before 5.19.16 could be used by local attackers (able to inject WLAN frames) to corrupt a linked list and, in turn, potentially execute code. | |||||
| CVE-2022-40090 | 1 Libtiff | 1 Libtiff | 2026-06-17 | N/A | 6.5 MEDIUM |
| An issue was discovered in function TIFFReadDirectory libtiff before 4.4.0 allows attackers to cause a denial of service via crafted TIFF file. | |||||
| CVE-2022-3252 | 1 Apple | 1 Swift-nio-extras | 2026-06-17 | N/A | 7.5 HIGH |
| Improper detection of complete HTTP body decompression SwiftNIO Extras provides a pair of helpers for transparently decompressing received HTTP request or response bodies. These two objects (HTTPRequestDecompressor and HTTPResponseDecompressor) both failed to detect when the decompressed body was considered complete. If trailing junk data was appended to the HTTP message body, the code would repeatedly attempt to decompress this data and fail. This would lead to an infinite loop making no forward progress, leading to livelock of the system and denial-of-service. This issue can be triggered by any attacker capable of sending a compressed HTTP message. Most commonly this is HTTP servers, as compressed HTTP messages cannot be negotiated for HTTP requests, but it is possible that users have configured decompression for HTTP requests as well. The attack is low effort, and likely to be reached without requiring any privilege or system access. The impact on availability is high: the process immediately becomes unavailable but does not immediately crash, meaning that it is possible for the process to remain in this state until an administrator intervenes or an automated circuit breaker fires. If left unchecked this issue will very slowly exhaust memory resources due to repeated buffer allocation, but the buffers are not written to and so it is possible that the processes will not terminate for quite some time. This risk can be mitigated by removing transparent HTTP message decompression. The issue is fixed by correctly detecting the termination of the compressed body as reported by zlib and refusing to decompress further data. The issue was found by Vojtech Rylko (https://github.com/vojtarylko) and reported publicly on GitHub. | |||||
| CVE-2022-3190 | 2 Fedoraproject, Wireshark | 2 Fedora, Wireshark | 2026-06-17 | N/A | 6.3 MEDIUM |
| Infinite loop in the F5 Ethernet Trailer protocol dissector in Wireshark 3.6.0 to 3.6.7 and 3.4.0 to 3.4.15 allows denial of service via packet injection or crafted capture file | |||||
| CVE-2022-39052 | 1 Otrs | 1 Otrs | 2026-06-17 | N/A | 7.5 HIGH |
| An external attacker is able to send a specially crafted email (with many recipients) and trigger a potential DoS of the system | |||||