Total
1035 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-0960 | 1 Wireshark | 1 Wireshark | 2026-06-17 | N/A | 4.7 MEDIUM |
| HTTP3 protocol dissector infinite loop in Wireshark 4.6.0 to 4.6.2 allows denial of service | |||||
| CVE-2026-0619 | 2026-06-17 | N/A | N/A | ||
| A reachable infinite loop via an integer wraparound is present in Silicon Labs' Matter SDK which allows an attacker to trigger a denial of service. A hard reset is required to recover the device. | |||||
| CVE-2025-7054 | 1 Cloudflare | 1 Quiche | 2026-06-17 | N/A | 6.5 MEDIUM |
| Cloudflare quiche was discovered to be vulnerable to an infinite loop when sending packets containing RETIRE_CONNECTION_ID frames. QUIC connections possess a set of connection identifiers (IDs); see Section 5.1 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Once the QUIC handshake completes, a local endpoint is responsible for issuing and retiring Connection IDs that are used by the remote peer to populate the Destination Connection ID field in packets sent from remote to local. Each Connection ID has a sequence number to ensure synchronization between peers. An unauthenticated remote attacker can exploit this vulnerability by first completing a handshake and then sending a specially-crafted set of frames that trigger a connection ID retirement in the victim. When the victim attempts to send a packet containing RETIRE_CONNECTION_ID frames, Section 19.16 of RFC 9000 https://datatracker.ietf.org/doc/html/rfc9000#section-19.6 requires that the sequence number of the retired connection ID must not be the same as the sequence number of the connection ID used by the packet. In other words, a packet cannot contain a frame that retires itself. In scenarios such as path migration, it is possible for there to be multiple active paths with different active connection IDs that could be used to retire each other. The exploit triggered an unintentional behaviour of a quiche design feature that supports retirement across paths while maintaining full connection ID synchronization, leading to an infinite loop.This issue affects quiche: from 0.15.0 before 0.24.5. | |||||
| CVE-2025-6365 | 1 Hobbesosr | 1 Kitten | 2026-06-17 | 5.2 MEDIUM | 5.7 MEDIUM |
| A vulnerability was found in HobbesOSR Kitten up to c4f8b7c3158983d1020af432be1b417b28686736 and classified as critical. Affected by this issue is the function set_pte_at in the library /include/arch-arm64/pgtable.h. The manipulation leads to resource consumption. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. | |||||
| CVE-2025-69648 | 1 Gnu | 1 Binutils | 2026-06-17 | N/A | 6.2 MEDIUM |
| GNU Binutils thru 2.45.1 readelf contains a denial-of-service vulnerability when processing a crafted binary with malformed DWARF .debug_rnglists data. A logic flaw in the DWARF parsing path causes readelf to repeatedly print the same warning message without making forward progress, resulting in a non-terminating output loop that requires manual interruption. No evidence of memory corruption or code execution was observed. | |||||
| CVE-2025-69647 | 1 Gnu | 1 Binutils | 2026-06-17 | N/A | 6.2 MEDIUM |
| GNU Binutils thru 2.45.1 readelf contains a denial-of-service vulnerability when processing a crafted binary with malformed DWARF loclists data. A logic flaw in the DWARF parsing code can cause readelf to repeatedly print the same table output without making forward progress, resulting in an unbounded output loop that never terminates unless externally interrupted. A local attacker can trigger this behavior by supplying a malicious input file, causing excessive CPU and I/O usage and preventing readelf from completing its analysis. | |||||
| CVE-2025-68137 | 1 Linuxfoundation | 1 Everest | 2026-06-17 | N/A | 8.3 HIGH |
| EVerest is an EV charging software stack. Prior to version 2025.10.0, an integer overflow occurring in `SdpPacket::parse_header()` allows the current buffer length to be set to 7 after a complete header of size 8 has been read. The remaining length to read is computed using the current length subtracted by the header length which results in a negative value. This value is then interpreted as `SIZE_MAX` (or slightly less) because the expected type of the argument is `size_t`. Depending on whether the server is plain TCP or TLS, this leads to either an infinite loop or a stack buffer overflow. Version 2025.10.0 fixes the issue. | |||||
| CVE-2025-64438 | 1 Eprosima | 1 Fast Dds | 2026-06-17 | N/A | 7.5 HIGH |
| Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group ). Prior to versions 3.4.1, 3.3.1, and 2.6.11, a remotely triggerable Out-of-Memory (OOM) denial-of-service exists in Fast -DDS when processing RTPS GAP submessages under RELIABLE QoS. By sending a tiny GAP packet with a huge gap range (`gapList .base - gapStart`), an attacker drives `StatefulReader::processGapMsg()` into an unbounded loop that inserts millions of s equence numbers into `WriterProxy::changes_received_` (`std::set`), causing multi-GB heap growth and process termination. No authentication is required beyond network reachability to the reader on the DDS domain. In environments without an RSS limit (non-ASan / unlimited), memory consumption was observed to rise to ~64 GB. Versions 3.4.1, 3.3.1, and 2.6.11 patch t he issue. | |||||
| CVE-2025-63829 | 1 Eprosima | 1 Fast Dds | 2026-06-17 | N/A | 7.5 HIGH |
| eProsima Fast-DDS v3.3 and before has an infinite loop vulnerability caused by integer overflow in the Time_t:: fraction() function. | |||||
| CVE-2025-60753 | 1 Libarchive | 1 Libarchive | 2026-06-17 | N/A | 5.5 MEDIUM |
| An issue was discovered in libarchive bsdtar before version 3.8.1 in function apply_substitution in file tar/subst.c when processing crafted -s substitution rules. This can cause unbounded memory allocation and lead to denial of service (Out-of-Memory crash). | |||||
| CVE-2025-5399 | 1 Haxx | 1 Curl | 2026-06-17 | N/A | 7.5 HIGH |
| Due to a mistake in libcurl's WebSocket code, a malicious server can send a particularly crafted packet which makes libcurl get trapped in an endless busy-loop. There is no other way for the application to escape or exit this loop other than killing the thread/process. This might be used to DoS libcurl-using application. | |||||
| CVE-2025-58190 | 1 Go | 1 Html | 2026-06-17 | N/A | 5.3 MEDIUM |
| The html.Parse function in golang.org/x/net/html has an infinite parsing loop when processing certain inputs, which can lead to denial of service (DoS) if an attacker provides specially crafted HTML content. | |||||
| CVE-2025-55118 | 2026-06-17 | N/A | 8.9 HIGH | ||
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured. The issue occurs in the following cases: * Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n"; * Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" | |||||
| CVE-2025-53628 | 1 Yhirose | 1 Cpp-httplib | 2026-06-17 | N/A | 8.8 HIGH |
| cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.20.1, cpp-httplib does not have a limit for a unique line, permitting an attacker to explore this to allocate memory arbitrarily. This vulnerability is fixed in 0.20.1. NOTE: This vulnerability is related to CVE-2025-53629. | |||||
| CVE-2025-53015 | 1 Imagemagick | 1 Imagemagick | 2026-06-17 | N/A | 7.5 HIGH |
| ImageMagick is free and open-source software used for editing and manipulating digital images. In versions prior to 7.1.2-0, infinite lines occur when writing during a specific XMP file conversion command. Version 7.1.2-0 fixes the issue. | |||||
| CVE-2025-51986 | 2026-06-17 | N/A | 7.5 HIGH | ||
| An issue was discovered in the demo/LINUXTCP implementation of cwalter-at freemodbus v.2018-09-12 allowing attackers to reach an infinite loop via a crafted length value for a packet. | |||||
| CVE-2025-48879 | 1 Octoprint | 1 Octoprint | 2026-06-17 | N/A | 6.5 MEDIUM |
| OctoPrint versions up until and including 1.11.1 contain a vulnerability that allows any unauthenticated attacker to send a manipulated broken multipart/form-data request to OctoPrint and through that make the web server component become unresponsive. The issue can be triggered by a broken multipart/form-data request lacking an end boundary to any of OctoPrint's endpoints implemented through the octoprint.server.util.tornado.UploadStorageFallbackHandler request handler. The request handler will get stuck in an endless busy loop, looking for a part of the request that will never come. As Tornado is single-threaded, that will effectively block the whole web server. The vulnerability has been patched in version 1.11.2. | |||||
| CVE-2025-42954 | 2026-06-17 | N/A | 2.7 LOW | ||
| SAP NetWeaver Business Warehouse CCAW application allows a privileged attacker to cause a high CPU load by executing a RFC enabled function modules without any input parameters, which results in reduced performance or interrupted operation of the affected resource. This leads to low impact on availability of the application, there is no impact on confidentiality and integrity. | |||||
| CVE-2025-3857 | 2026-06-17 | N/A | 7.5 HIGH | ||
| When reading binary Ion data through Amazon.IonDotnet using the RawBinaryReader class, Amazon.IonDotnet does not check the number of bytes read from the underlying stream while deserializing the binary format. If the Ion data is malformed or truncated, this triggers an infinite loop condition that could potentially result in a denial of service. Users should upgrade to Amazon.IonDotnet version 1.3.1 and ensure any forked or derivative code is patched to incorporate the new fixes. | |||||
| CVE-2025-38649 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: qcs615: fix a crash issue caused by infinite loop for Coresight An infinite loop has been created by the Coresight devices. When only a source device is enabled, the coresight_find_activated_sysfs_sink function is recursively invoked in an attempt to locate an active sink device, ultimately leading to a stack overflow and system crash. Therefore, disable the replicator1 to break the infinite loop and prevent a potential stack overflow. replicator1_out -> funnel_swao_in6 -> tmc_etf_swao_in -> tmc_etf_swao_out | | replicator1_in replicator_swao_in | | replicator0_out1 replicator_swao_out0 | | replicator0_in funnel_in1_in3 | | tmc_etf_out <- tmc_etf_in <- funnel_merg_out <- funnel_merg_in1 <- funnel_in1_out [call trace] dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 panic+0x340/0x3b0 nmi_panic+0x94/0xa0 panic_bad_stack+0x114/0x138 handle_bad_stack+0x34/0xb8 __bad_stack+0x78/0x80 coresight_find_activated_sysfs_sink+0x28/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] ... coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_enable_sysfs+0x80/0x2a0 [coresight] side effect after the change: Only trace data originating from AOSS can reach the ETF_SWAO and EUD sinks. | |||||