Total
15356 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-0126 | 1 Google | 1 Android | 2026-10-25 | N/A | 9.8 CRITICAL |
| In WC-Radio, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. | |||||
| CVE-2026-10641 | 1 Zephyrproject | 1 Zephyr | 2026-10-25 | N/A | 7.1 HIGH |
| Zephyr's Bluetooth Classic Hands-Free Profile (HFP) Hands-Free role parser (subsys/bluetooth/host/classic/hfp_hf.c) contains an out-of-bounds write. During Service Level Connection setup the HF sends AT+CIND=? and parses the AG's +CIND: response in cind_handle(), which assigns a per-entry counter index and calls cind_handle_values() for each list element. cind_handle_values() then wrote hf->ind_table[index] = i without verifying that index is within the 20-element int8_t ind_table[] array of struct bt_hfp_hf. Because the parser places no cap on the number of +CIND: list entries, a remote Attendant Gateway (a malicious, compromised, or spoofed peer the device connects to over Bluetooth) can send a response with more than 20 recognized indicator entries and drive index arbitrarily large, writing a small attacker-positioned value past the array into adjacent struct fields (feature masks, SDP/version state, the calls[] array, work/atomic bookkeeping) and potentially beyond the static connection pool slot. This yields memory corruption and at least denial of service of the Bluetooth host, triggered by a single malformed AT response with no user interaction. The sibling consumer ag_indicator_handle_values() already performed the equivalent bounds check; this commit adds the same index >= ARRAY_SIZE(hf->ind_table) guard to close the gap. Affects builds with CONFIG_BT_HFP_HF enabled; introduced with the original HFP HF CIND parser (~v1.7) and present through v4.4.0. | |||||
| CVE-2026-56114 | 1 Dhcpcd Project | 1 Dhcpcd | 2026-10-25 | N/A | 5.3 MEDIUM |
| dhcpcd through 10.3.2, fixed in commit 2f00c7b, contains a one-byte stack out-of-bounds write vulnerability in dhcp6_makemessage() in src/dhcp6.c that allows unauthenticated same-link attackers to write beyond a fixed local buffer by serializing an oversized RFC6603 OPTION_PD_EXCLUDE option body. Attackers can send a crafted DHCPv6 ADVERTISE message containing an IA_PD IAPREFIX /0 with a valid OPTION_PD_EXCLUDE using an exclude prefix length of /121 through /128 to trigger the out-of-bounds write and potentially corrupt adjacent stack memory. | |||||
| CVE-2026-47749 | 1 Leejet | 1 Stable-diffusion.cpp | 2026-10-25 | N/A | 7.8 HIGH |
| stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. Versions prior to master-584-0a7ae07 are vulnerable to heap buffer overflow in SHORT_BINUNICODE parsing for PyTorch checkpoint files. The pickle .ckpt parser in src/model.cpp contained a heap buffer overflow vulnerability in the SHORT_BINUNICODE opcode handler. The issue was caused by sign confusion on the opcode length field. A crafted .ckpt file could trigger memcpy with a very large length derived from a negative signed value, causing immediate heap corruption. Any application using affected stable-diffusion.cpp releases to load untrusted .ckpt model files could be vulnerable. A malicious checkpoint file could cause heap corruption through memcpy with an attacker-controlled length. This may lead to process crash and could potentially be leveraged for code execution depending on heap layout. The attack requires the victim or application to load a .ckpt file from an untrusted source, such as a downloaded model from a model sharing site. The issue has been resolved in version master-584-0a7ae07. If developers are unable to immediately update their applications they can work around this issue by not loading .ckpt checkpoint files from untrusted sources, and referring to trusted model sources and safer formats such as .safetensors where possible. | |||||
| CVE-2026-48773 | 1 Proxysql | 1 Proxysql | 2026-10-25 | N/A | 9.8 CRITICAL |
| ProxySQL is a proxy for MySQL and its forks, as well as PostgreSQL. Versions 2.0.18 through 3.0.8 have a pre-authentication heap memory corruption vulnerability in the MySQL and PostgreSQL protocol first-read paths. A remote unauthenticated client can declare an oversized first packet length, and ProxySQL passes that attacker-controlled length directly to `recv()` while writing into a fixed 32 KB input queue. Version 3.0.9 patches the issue. | |||||
| CVE-2026-0150 | 1 Google | 1 Android | 2026-10-25 | N/A | 7.8 HIGH |
| In ExecuteGraph command handler of EdgeTPU firmware, there is a possible out of bounds write due to an integer overflow. This could lead to local escalation of privilege with root privileges needed. User interaction is not needed for exploitation. | |||||
| CVE-2026-6045 | 2026-10-25 | N/A | N/A | ||
| LibreOffice can import EMF+ graphics, which may be embedded in documents. A heap buffer overflow existed when importing an EMF+ gradient brush. The number of gradient blend points was read from the file and used to compute an allocation size, but that multiplication could overflow, so a small buffer was allocated and then filled as if it were large, writing past its end. In fixed versions the blend-point count is checked against the data actually available before allocating. | |||||
| CVE-2026-47750 | 1 Leejet | 1 Stable-diffusion.cpp | 2026-10-25 | N/A | 7.8 HIGH |
| stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. In versions prior to master-584-0a7ae07, the pickle .ckpt parser in src/model.cpp contained a heap buffer overflow vulnerability in the GLOBAL opcode handler. The issue was caused by missing validation when searching for newline-delimited fields. A crafted .ckpt file without the expected newline could cause the parser to use -1 as a copy length, resulting in immediate heap corruption. The attack requires the victim or application to load a .ckpt file from an untrusted source, such as a downloaded model from a model sharing site. The issue has been resolved in version master-584-0a7ae07. If developers are unable to immediately update their applications they can work around this issue by following these instructions: do not load .ckpt checkpoint files from untrusted sources, and prefer trusted model sources and safer formats such as .safetensors where possible. | |||||
| CVE-2026-43907 | 1 Openimageio | 1 Openimageio | 2026-10-25 | N/A | 8.3 HIGH |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, a signed integer overflow in QueryRGBBufferSizeInternal() in DPXColorConverter.cpp leads to a heap-based out-of-bounds write when processing crafted DPX image files. The function computes buffer sizes using 32-bit signed integer arithmetic with negative multipliers (e.g., pixels * -3 * bytes for kCbYCr descriptors and pixels * -4 * bytes for kABGR descriptors), where a negative result is used as an in-band signal that no separate buffer is needed. When the pixel count is sufficiently large, the multiplication overflows INT_MIN and wraps to a small positive value. The caller in dpxinput.cpp interprets this positive value as a required buffer size, allocates an undersized heap buffer via m_decodebuf.resize(), and then writes the full image data into it via fread, resulting in a heap buffer overflow. An attacker can exploit this by crafting a DPX file that triggers the overflow, causing a denial of service (crash) or potentially arbitrary code execution through heap corruption in any application that reads pixel data using OpenImageIO. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0. | |||||
| CVE-2026-0147 | 1 Google | 1 Android | 2026-10-25 | N/A | 8.8 HIGH |
| In __mfc_core_nal_q_get_dec_metadata_sei_nal of mfc_core_nal_q.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. | |||||
| CVE-2026-0161 | 1 Google | 1 Android | 2026-10-25 | N/A | 8.8 HIGH |
| In numberOfReportBlocks of RtpSession.cpp, there is a possible out of bounds write due to an integer overflow. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | |||||
| CVE-2026-0138 | 1 Google | 1 Android | 2026-10-25 | N/A | 7.8 HIGH |
| In lwis_io_buffer_write of lwis_io_buffer.c, there is a possible out of bounds write due to memory corruption. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. | |||||
| CVE-2026-47151 | 1 Silabs | 1 Emberznet | 2026-10-25 | N/A | 7.1 HIGH |
| In EmberZNet v9.0.2 and earlier, malformed ClearWeekdaySchedule messages can trigger out-of-bounds writes into Door Lock schedule state. The size and location of this data is limited. These messages must come from a device that has already joined the network. Only devices supporting the Door Lock cluster may be impacted. | |||||
| CVE-2026-6507 | 2026-10-25 | N/A | 7.5 HIGH | ||
| A flaw was found in dnsmasq. A remote attacker could exploit an out-of-bounds write vulnerability by sending a specially crafted BOOTREPLY (Bootstrap Protocol Reply) packet to a dnsmasq server configured with the `--dhcp-split-relay` option. This can lead to memory corruption, causing the dnsmasq daemon to crash and resulting in a denial of service (DoS). | |||||
| CVE-2026-49295 | 1 Struktur | 1 Libde265 | 2026-10-25 | N/A | 7.1 HIGH |
| libde265 is an open source implementation of the h.265 video codec. Prior to version 1.0.20, a crafted H.265 bitstream can cause an out-of-bounds array write in `decoder_context::process_reference_picture_set()` (`libde265/decctx.cc:1376`). The root cause is a missing aggregate bound check on predicted short-term reference picture set entries. Individual list sizes are validated, but the combined count after predicted RPS construction can exceed the 16-entry `PocStFoll` array, writing at index 16. Version 1.0.20 patches the issue. | |||||
| CVE-2026-0164 | 1 Google | 1 Android | 2026-10-25 | N/A | 8.8 HIGH |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. | |||||
| CVE-2026-47747 | 1 Leejet | 1 Stable-diffusion.cpp | 2026-10-25 | N/A | 7.8 HIGH |
| stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. In versions prior to master-584-0a7ae07, the pickle .ckpt parser in src/model.cpp contained a heap buffer overflow vulnerability in the BINUNICODE opcode handler. The issue was caused by sign confusion on the opcode length field. A crafted .ckpt file could trigger memcpy with a very large length derived from a negative signed value, causing immediate heap corruption. The issue has been resolved in version master-584-0a7ae07. If developers are unable to immediately update their applications they can work around this issue by only loading .ckpt checkpoint files from trusted sources and preferring trusted model sources and safer formats such as .safetensors where possible. | |||||
| CVE-2026-34661 | 3 Adobe, Apple, Microsoft | 3 Illustrator, Macos, Windows | 2026-10-25 | N/A | 7.8 HIGH |
| Illustrator versions 29.8.6, 30.3 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | |||||
| CVE-2026-0153 | 1 Google | 1 Android | 2026-10-25 | N/A | 7.8 HIGH |
| In Write of msg_to_host_buffer.cc, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | |||||
| CVE-2026-6039 | 2026-10-25 | N/A | N/A | ||
| LibreOffice can import drawings in the DXF format used by CAD software. A heap buffer overflow existed when importing a DXF polyline. The point count taken from the file was truncated to a 16-bit value when the point buffer was sized, while the full count was used to fill it, so a polyline whose point count exceeded the 16-bit range was written past the end of the buffer. In fixed versions such oversized polylines are rejected. | |||||