Total
14870 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-39836 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: efi: stmm: Fix incorrect buffer allocation method The communication buffer allocated by setup_mm_hdr() is later on passed to tee_shm_register_kernel_buf(). The latter expects those buffers to be contiguous pages, but setup_mm_hdr() just uses kmalloc(). That can cause various corruptions or BUGs, specifically since commit 9aec2fb0fd5e ("slab: allocate frozen pages"), though it was broken before as well. Fix this by using alloc_pages_exact() instead of kmalloc(). | |||||
| CVE-2025-39821 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: perf: Avoid undefined behavior from stopping/starting inactive events Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can leave event->hw.idx at -1. When PMU drivers later attempt to use this negative index as a shift exponent in bitwise operations, it leads to UBSAN shift-out-of-bounds reports. The issue is a logical flaw in how event groups handle throttling when some members are intentionally disabled. Based on the analysis and the reproducer provided by Mark Rutland (this issue on both arm64 and x86-64). The scenario unfolds as follows: 1. A group leader event is configured with a very aggressive sampling period (e.g., sample_period = 1). This causes frequent interrupts and triggers the throttling mechanism. 2. A child event in the same group is created in a disabled state (.disabled = 1). This event remains in PERF_EVENT_STATE_OFF. Since it hasn't been scheduled onto the PMU, its event->hw.idx remains initialized at -1. 3. When throttling occurs, perf_event_throttle_group() and later perf_event_unthrottle_group() iterate through all siblings, including the disabled child event. 4. perf_event_throttle()/unthrottle() are called on this inactive child event, which then call event->pmu->start()/stop(). 5. The PMU driver receives the event with hw.idx == -1 and attempts to use it as a shift exponent. e.g., in macros like PMCNTENSET(idx), leading to the UBSAN report. The throttling mechanism attempts to start/stop events that are not actively scheduled on the hardware. Move the state check into perf_event_throttle()/perf_event_unthrottle() so that inactive events are skipped entirely. This ensures only active events with a valid hw.idx are processed, preventing undefined behavior and silencing UBSAN warnings. The corrected check ensures true before proceeding with PMU operations. The problem can be reproduced with the syzkaller reproducer: | |||||
| CVE-2025-39818 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-thc: Fix incorrect pointer arithmetic in I2C regs save Improper use of secondary pointer (&dev->i2c_subip_regs) caused kernel crash and out-of-bounds error: BUG: KASAN: slab-out-of-bounds in _regmap_bulk_read+0x449/0x510 Write of size 4 at addr ffff888136005dc0 by task kworker/u33:5/5107 CPU: 3 UID: 0 PID: 5107 Comm: kworker/u33:5 Not tainted 6.16.0+ #3 PREEMPT(voluntary) Workqueue: async async_run_entry_fn Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x660 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x26/0x200 kasan_report+0xe1/0x120 ? _regmap_bulk_read+0x449/0x510 ? _regmap_bulk_read+0x449/0x510 __asan_report_store4_noabort+0x17/0x30 _regmap_bulk_read+0x449/0x510 ? __pfx__regmap_bulk_read+0x10/0x10 regmap_bulk_read+0x270/0x3d0 pio_complete+0x1ee/0x2c0 [intel_thc] ? __pfx_pio_complete+0x10/0x10 [intel_thc] ? __pfx_pio_wait+0x10/0x10 [intel_thc] ? regmap_update_bits_base+0x13b/0x1f0 thc_i2c_subip_pio_read+0x117/0x270 [intel_thc] thc_i2c_subip_regs_save+0xc2/0x140 [intel_thc] ? __pfx_thc_i2c_subip_regs_save+0x10/0x10 [intel_thc] [...] The buggy address belongs to the object at ffff888136005d00 which belongs to the cache kmalloc-rnd-12-192 of size 192 The buggy address is located 0 bytes to the right of allocated 192-byte region [ffff888136005d00, ffff888136005dc0) Replaced with direct array indexing (&dev->i2c_subip_regs[i]) to ensure safe memory access. | |||||
| CVE-2025-39810 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix memory corruption when FW resources change during ifdown bnxt_set_dflt_rings() assumes that it is always called before any TC has been created. So it doesn't take bp->num_tc into account and assumes that it is always 0 or 1. In the FW resource or capability change scenario, the FW will return flags in bnxt_hwrm_if_change() that will cause the driver to reinitialize and call bnxt_cancel_reservations(). This will lead to bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc may be greater than 1. This will cause bp->tx_ring[] to be sized too small and cause memory corruption in bnxt_alloc_cp_rings(). Fix it by properly scaling the TX rings by bp->num_tc in the code paths mentioned above. Add 2 helper functions to determine bp->tx_nr_rings and bp->tx_nr_rings_per_tc. | |||||
| CVE-2025-39788 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE On Google gs101, the number of UTP transfer request slots (nutrs) is 32, and in this case the driver ends up programming the UTRL_NEXUS_TYPE incorrectly as 0. This is because the left hand side of the shift is 1, which is of type int, i.e. 31 bits wide. Shifting by more than that width results in undefined behaviour. Fix this by switching to the BIT() macro, which applies correct type casting as required. This ensures the correct value is written to UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift warning: UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21 shift exponent 32 is too large for 32-bit type 'int' For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE write. | |||||
| CVE-2025-39783 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix configfs group list head handling Doing a list_del() on the epf_group field of struct pci_epf_driver in pci_epf_remove_cfs() is not correct as this field is a list head, not a list entry. This list_del() call triggers a KASAN warning when an endpoint function driver which has a configfs attribute group is torn down: ================================================================== BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198 Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319 CPU: 3 UID: 0 PID: 319 Comm: rmmod Not tainted 6.16.0-rc2 #1 NONE Hardware name: Radxa ROCK 5B (DT) Call trace: show_stack+0x2c/0x84 (C) dump_stack_lvl+0x70/0x98 print_report+0x17c/0x538 kasan_report+0xb8/0x190 __asan_report_store8_noabort+0x20/0x2c pci_epf_remove_cfs+0x17c/0x198 pci_epf_unregister_driver+0x18/0x30 nvmet_pci_epf_cleanup_module+0x24/0x30 [nvmet_pci_epf] __arm64_sys_delete_module+0x264/0x424 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xac/0x230 do_el0_svc+0x40/0x58 el0_svc+0x48/0xdc el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ... Remove this incorrect list_del() call from pci_epf_remove_cfs(). | |||||
| CVE-2025-38729 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Validate UAC3 power domain descriptors, too UAC3 power domain descriptors need to be verified with its variable bLength for avoiding the unexpected OOB accesses by malicious firmware, too. | |||||
| CVE-2025-38702 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: fix potential buffer overflow in do_register_framebuffer() The current implementation may lead to buffer overflow when: 1. Unregistration creates NULL gaps in registered_fb[] 2. All array slots become occupied despite num_registered_fb < FB_MAX 3. The registration loop exceeds array bounds Add boundary check to prevent registered_fb[FB_MAX] access. | |||||
| CVE-2025-38676 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Avoid stack buffer overflow from kernel cmdline While the kernel command line is considered trusted in most environments, avoid writing 1 byte past the end of "acpiid" if the "str" argument is maximum length. | |||||
| CVE-2025-38585 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int() When gmin_get_config_var() calls efi.get_variable() and the EFI variable is larger than the expected buffer size, two behaviors combine to create a stack buffer overflow: 1. gmin_get_config_var() does not return the proper error code when efi.get_variable() fails. It returns the stale 'ret' value from earlier operations instead of indicating the EFI failure. 2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates *out_len to the required buffer size but writes no data to the output buffer. However, due to bug #1, gmin_get_var_int() believes the call succeeded. The caller gmin_get_var_int() then performs: - Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack - Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64 - If EFI variable is >64 bytes, efi.get_variable() sets len=required_size - Due to bug #1, thinks call succeeded with len=required_size - Executes val[len] = 0, writing past end of 65-byte stack buffer This creates a stack buffer overflow when EFI variables are larger than 64 bytes. Since EFI variables can be controlled by firmware or system configuration, this could potentially be exploited for code execution. Fix the bug by returning proper error codes from gmin_get_config_var() based on EFI status instead of stale 'ret' value. The gmin_get_var_int() function is called during device initialization for camera sensor configuration on Intel Bay Trail and Cherry Trail platforms using the atomisp camera stack. | |||||
| CVE-2025-38538 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: nbpfaxi: Fix memory corruption in probe() The nbpf->chan[] array is allocated earlier in the nbpf_probe() function and it has "num_channels" elements. These three loops iterate one element farther than they should and corrupt memory. The changes to the second loop are more involved. In this case, we're copying data from the irqbuf[] array into the nbpf->chan[] array. If the data in irqbuf[i] is the error IRQ then we skip it, so the iterators are not in sync. I added a check to ensure that we don't go beyond the end of the irqbuf[] array. I'm pretty sure this can't happen, but it seemed harmless to add a check. On the other hand, after the loop has ended there is a check to ensure that the "chan" iterator is where we expect it to be. In the original code we went one element beyond the end of the array so the iterator wasn't in the correct place and it would always return -EINVAL. However, now it will always be in the correct place. I deleted the check since we know the result. | |||||
| CVE-2025-38459 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix infinite recursive call of clip_push(). syzbot reported the splat below. [0] This happens if we call ioctl(ATMARP_MKIP) more than once. During the first call, clip_mkip() sets clip_push() to vcc->push(), and the second call copies it to clip_vcc->old_push(). Later, when the socket is close()d, vcc_destroy_socket() passes NULL skb to clip_push(), which calls clip_vcc->old_push(), triggering the infinite recursion. Let's prevent the second ioctl(ATMARP_MKIP) by checking vcc->user_back, which is allocated by the first call as clip_vcc. Note also that we use lock_sock() to prevent racy calls. [0]: BUG: TASK stack guard page was hit at ffffc9000d66fff8 (stack is ffffc9000d670000..ffffc9000d678000) Oops: stack guard page: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5322 Comm: syz.0.0 Not tainted 6.16.0-rc4-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:clip_push+0x5/0x720 net/atm/clip.c:191 Code: e0 8f aa 8c e8 1c ad 5b fa eb ae 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 55 <41> 57 41 56 41 55 41 54 53 48 83 ec 20 48 89 f3 49 89 fd 48 bd 00 RSP: 0018:ffffc9000d670000 EFLAGS: 00010246 RAX: 1ffff1100235a4a5 RBX: ffff888011ad2508 RCX: ffff8880003c0000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888037f01000 RBP: dffffc0000000000 R08: ffffffff8fa104f7 R09: 1ffffffff1f4209e R10: dffffc0000000000 R11: ffffffff8a99b300 R12: ffffffff8a99b300 R13: ffff888037f01000 R14: ffff888011ad2500 R15: ffff888037f01578 FS: 000055557ab6d500(0000) GS:ffff88808d250000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d66fff8 CR3: 0000000043172000 CR4: 0000000000352ef0 Call Trace: <TASK> clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 ... clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 clip_push+0x6dc/0x720 net/atm/clip.c:200 vcc_destroy_socket net/atm/common.c:183 [inline] vcc_release+0x157/0x460 net/atm/common.c:205 __sock_release net/socket.c:647 [inline] sock_close+0xc0/0x240 net/socket.c:1391 __fput+0x449/0xa70 fs/file_table.c:465 task_work_run+0x1d1/0x260 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xec/0x110 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x2bd/0x3b0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff31c98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffb5aa1f78 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 0000000000012747 RCX: 00007ff31c98e929 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007ff31cbb7ba0 R08: 0000000000000001 R09: 0000000db5aa226f R10: 00007ff31c7ff030 R11: 0000000000000246 R12: 00007ff31cbb608c R13: 00007ff31cbb6080 R14: ffffffffffffffff R15: 00007fffb5aa2090 </TASK> Modules linked in: | |||||
| CVE-2025-38428 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - check record size in ims_pcu_flash_firmware() The "len" variable comes from the firmware and we generally do trust firmware, but it's always better to double check. If the "len" is too large it could result in memory corruption when we do "memcpy(fragment->data, rec->data, len);" | |||||
| CVE-2025-38394 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: fix memory corruption of input_handler_list In appletb_kbd_probe an input handler is initialised and then registered with input core through input_register_handler(). When this happens input core will add the input handler (specifically its node) to the global input_handler_list. The input_handler_list is central to the functionality of input core and is traversed in various places in input core. An example of this is when a new input device is plugged in and gets registered with input core. The input_handler in probe is allocated as device managed memory. If a probe failure occurs after input_register_handler() the input_handler memory is freed, yet it will remain in the input_handler_list. This effectively means the input_handler_list contains a dangling pointer to data belonging to a freed input handler. This causes an issue when any other input device is plugged in - in my case I had an old PixArt HP USB optical mouse and I decided to plug it in after a failure occurred after input_register_handler(). This lead to the registration of this input device via input_register_device which involves traversing over every handler in the corrupted input_handler_list and calling input_attach_handler(), giving each handler a chance to bind to newly registered device. The core of this bug is a UAF which causes memory corruption of input_handler_list and to fix it we must ensure the input handler is unregistered from input core, this is done through input_unregister_handler(). [ 63.191597] ================================================================== [ 63.192094] BUG: KASAN: slab-use-after-free in input_attach_handler.isra.0+0x1a9/0x1e0 [ 63.192094] Read of size 8 at addr ffff888105ea7c80 by task kworker/0:2/54 [ 63.192094] [ 63.192094] CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.16.0-rc2-00321-g2aa6621d [ 63.192094] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.164 [ 63.192094] Workqueue: usb_hub_wq hub_event [ 63.192094] Call Trace: [ 63.192094] <TASK> [ 63.192094] dump_stack_lvl+0x53/0x70 [ 63.192094] print_report+0xce/0x670 [ 63.192094] kasan_report+0xce/0x100 [ 63.192094] input_attach_handler.isra.0+0x1a9/0x1e0 [ 63.192094] input_register_device+0x76c/0xd00 [ 63.192094] hidinput_connect+0x686d/0xad60 [ 63.192094] hid_connect+0xf20/0x1b10 [ 63.192094] hid_hw_start+0x83/0x100 [ 63.192094] hid_device_probe+0x2d1/0x680 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] hid_add_device+0x30b/0x910 [ 63.192094] usbhid_probe+0x920/0xe00 [ 63.192094] usb_probe_interface+0x363/0x9a0 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] usb_set_configuration+0xd14/0x1880 [ 63.192094] usb_generic_driver_probe+0x78/0xb0 [ 63.192094] usb_probe_device+0xaa/0x2e0 [ 63.192094] really_probe+0x1c3/0x690 [ 63.192094] __driver_probe_device+0x247/0x300 [ 63.192094] driver_probe_device+0x49/0x210 [ 63.192094] __device_attach_driver+0x160/0x320 [ 63.192094] bus_for_each_drv+0x10f/0x190 [ 63.192094] __device_attach+0x18e/0x370 [ 63.192094] bus_probe_device+0x123/0x170 [ 63.192094] device_add+0xd4d/0x1460 [ 63.192094] usb_new_device+0x7b4/0x1000 [ 63.192094] hub_event+0x234d/0x3 ---truncated--- | |||||
| CVE-2025-38348 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() Robert Morris reported: |If a malicious USB device pretends to be an Intersil p54 wifi |interface and generates an eeprom_readback message with a large |eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the |message beyond the end of priv->eeprom. | |static void p54_rx_eeprom_readback(struct p54_common *priv, | struct sk_buff *skb) |{ | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | | if (priv->fw_var >= 0x509) { | memcpy(priv->eeprom, eeprom->v2.data, | le16_to_cpu(eeprom->v2.len)); | } else { | memcpy(priv->eeprom, eeprom->v1.data, | le16_to_cpu(eeprom->v1.len)); | } | [...] The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom(). The device is supposed to provide the same length back to the driver. But yes, it's possible (like shown in the report) to alter the value to something that causes a crash/panic due to overrun. This patch addresses the issue by adding the size to the common device context, so p54_rx_eeprom_readback no longer relies on possibly tampered values... That said, it also checks if the "firmware" altered the value and no longer copies them. The one, small saving grace is: Before the driver tries to read the eeprom, it needs to upload >a< firmware. the vendor firmware has a proprietary license and as a reason, it is not present on most distributions by default. | |||||
| CVE-2025-38298 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/skx_common: Fix general protection fault After loading i10nm_edac (which automatically loads skx_edac_common), if unload only i10nm_edac, then reload it and perform error injection testing, a general protection fault may occur: mce: [Hardware Error]: Machine check events logged Oops: general protection fault ... ... Workqueue: events mce_gen_pool_process RIP: 0010:string+0x53/0xe0 ... Call Trace: <TASK> ? die_addr+0x37/0x90 ? exc_general_protection+0x1e7/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? string+0x53/0xe0 vsnprintf+0x23e/0x4c0 snprintf+0x4d/0x70 skx_adxl_decode+0x16a/0x330 [skx_edac_common] skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common] skx_mce_check_error+0x17/0x20 [skx_edac_common] ... The issue arose was because the variable 'adxl_component_count' (inside skx_edac_common), which counts the ADXL components, was not reset. During the reloading of i10nm_edac, the count was incremented by the actual number of ADXL components again, resulting in a count that was double the real number of ADXL components. This led to an out-of-bounds reference to the ADXL component array, causing the general protection fault above. Fix this issue by resetting the 'adxl_component_count' in adxl_put(), which is called during the unloading of {skx,i10nm}_edac. | |||||
| CVE-2025-38267 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not trigger WARN_ON() due to a commit_overrun When reading a memory mapped buffer the reader page is just swapped out with the last page written in the write buffer. If the reader page is the same as the commit buffer (the buffer that is currently being written to) it was assumed that it should never have missed events. If it does, it triggers a WARN_ON_ONCE(). But there just happens to be one scenario where this can legitimately happen. That is on a commit_overrun. A commit overrun is when an interrupt preempts an event being written to the buffer and then the interrupt adds so many new events that it fills and wraps the buffer back to the commit. Any new events would then be dropped and be reported as "missed_events". In this case, the next page to read is the commit buffer and after the swap of the reader page, the reader page will be the commit buffer, but this time there will be missed events and this triggers the following warning: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1127 at kernel/trace/ring_buffer.c:7357 ring_buffer_map_get_reader+0x49a/0x780 Modules linked in: kvm_intel kvm irqbypass CPU: 2 UID: 0 PID: 1127 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00004-g478bc2824b45-dirty #564 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ring_buffer_map_get_reader+0x49a/0x780 Code: 00 00 00 48 89 fe 48 c1 ee 03 80 3c 2e 00 0f 85 ec 01 00 00 4d 3b a6 a8 00 00 00 0f 85 8a fd ff ff 48 85 c0 0f 84 55 fe ff ff <0f> 0b e9 4e fe ff ff be 08 00 00 00 4c 89 54 24 58 48 89 54 24 50 RSP: 0018:ffff888121787dc0 EFLAGS: 00010002 RAX: 00000000000006a2 RBX: ffff888100062800 RCX: ffffffff8190cb49 RDX: ffff888126934c00 RSI: 1ffff11020200a15 RDI: ffff8881010050a8 RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffed1024d26982 R10: ffff888126934c17 R11: ffff8881010050a8 R12: ffff888126934c00 R13: ffff8881010050b8 R14: ffff888101005000 R15: ffff888126930008 FS: 00007f95c8cd7540(0000) GS:ffff8882b576e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95c8de4dc0 CR3: 0000000128452002 CR4: 0000000000172ef0 Call Trace: <TASK> ? __pfx_ring_buffer_map_get_reader+0x10/0x10 tracing_buffers_ioctl+0x283/0x370 __x64_sys_ioctl+0x134/0x190 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f95c8de48db Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1c 48 8b 44 24 18 64 48 2b 04 25 28 00 00 RSP: 002b:00007ffe037ba110 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffe037bb2b0 RCX: 00007f95c8de48db RDX: 0000000000000000 RSI: 0000000000005220 RDI: 0000000000000006 RBP: 00007ffe037ba180 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe037bb6f8 R14: 00007f95c9065000 R15: 00005575c7492c90 </TASK> irq event stamp: 5080 hardirqs last enabled at (5079): [<ffffffff83e0adb0>] _raw_spin_unlock_irqrestore+0x50/0x70 hardirqs last disabled at (5080): [<ffffffff83e0aa83>] _raw_spin_lock_irqsave+0x63/0x70 softirqs last enabled at (4182): [<ffffffff81516122>] handle_softirqs+0x552/0x710 softirqs last disabled at (4159): [<ffffffff815163f7>] __irq_exit_rcu+0x107/0x210 ---[ end trace 0000000000000000 ]--- The above was triggered by running on a kernel with both lockdep and KASAN as well as kmemleak enabled and executing the following command: # perf record -o perf-test.dat -a -- trace-cmd record --nosplice -e all -p function hackbench 50 With perf interjecting a lot of interrupts and trace-cmd enabling all events as well as function tracing, with lockdep, KASAN and kmemleak enabled, it could cause an interrupt preempting an event being written to add enough event ---truncated--- | |||||
| CVE-2025-38183 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get() Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8). This seems correct and aligns with the PTP interrupt status register (PTP_INT_STS) specifications. However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index: lan743x_ptp_io_event_clock_get(..., u8 channel,...) { ... /* Update Local timestamp */ extts = &ptp->extts[channel]; extts->ts.tv_sec = sec; ... } To avoid an out-of-bounds write and utilize all the supported GPIO inputs, set LAN743X_PTP_N_EXTTS to 8. Detected using the static analysis tool - Svace. | |||||
| CVE-2025-38157 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Abort software beacon handling if disabled A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled. | |||||
| CVE-2025-38077 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store() If the 'buf' array received from the user contains an empty string, the 'length' variable will be zero. Accessing the 'buf' array element with index 'length - 1' will result in a buffer overflow. Add a check for an empty string. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||