Total
771 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-46061 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix deadlock in jbd2_journal_cancel_revoke() Commit f76d4c28a46a ("fs/jbd2: use sleeping version of __find_get_block()") changed jbd2_journal_cancel_revoke() to use __find_get_block_nonatomic() which holds the folio lock instead of i_private_lock. This breaks the lock ordering (folio -> buffer) and causes an ABBA deadlock when the filesystem blocksize < pagesize: T1 T2 ext4_mkdir() ext4_init_new_dir() ext4_append() ext4_getblk() lock_buffer() <- A sync_blockdev() blkdev_writepages() writeback_iter() writeback_get_folio() folio_lock() <- B ext4_journal_get_create_access() jbd2_journal_cancel_revoke() __find_get_block_nonatomic() folio_lock() <- B block_write_full_folio() lock_buffer() <- A This can occasionally cause generic/013 to hang. Fix by only calling __find_get_block_nonatomic() when the passed buffer_head doesn't belong to the bdev, which is the only case that we need to look up its bdev alias. Otherwise, the lookup is redundant since the found buffer_head is equal to the one we passed in. | |||||
| CVE-2026-46031 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Reinstate disabling of BHs around IRQ handler If the driver executes ks8851_irq() AND a TX packet has been sent, then the driver enables TX queue via netif_wake_queue() which schedules TX softirq to queue packets for this device. If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to allocate SKBs for the received packets. If netdev_alloc_skb_ip_align() is called with BH enabled, then local_bh_enable() at the end of netdev_alloc_skb_ip_align() will trigger the pending softirq processing, which may ultimately call the .xmit callback ks8851_start_xmit_par(). The ks8851_start_xmit_par() will try to lock struct ks8851_net_par .lock spinlock, which is already locked by ks8851_irq() from which ks8851_start_xmit_par() was called. This leads to a deadlock, which is reported by the kernel, including a trace listed below. If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0 ("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock can also be triggered without received packet in the RX FIFO. The pending softirqs will be processed on return from spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the deadlock as well. Fix the problem by disabling BH around critical sections, including the IRQ handler, thus preventing the net_tx_action() softirq from triggering during these critical sections. The net_tx_action() softirq is triggered once BH are re-enabled and at the end of the IRQ handler, once all the other IRQ handler actions have been completed. __schedule from schedule_rtlock+0x1c/0x34 schedule_rtlock from rtlock_slowlock_locked+0x548/0x904 rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8 ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44 netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188 dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c sch_direct_xmit from __qdisc_run+0x1f8/0x4ec __qdisc_run from qdisc_run+0x1c/0x28 qdisc_run from net_tx_action+0x1f0/0x268 net_tx_action from handle_softirqs+0x1a4/0x270 handle_softirqs from __local_bh_enable_ip+0xcc/0xe0 __local_bh_enable_ip from __alloc_skb+0xd8/0x128 __alloc_skb from __netdev_alloc_skb+0x3c/0x19c __netdev_alloc_skb from ks8851_irq+0x388/0x4d4 ks8851_irq from irq_thread_fn+0x24/0x64 irq_thread_fn from irq_thread+0x178/0x28c irq_thread from kthread+0x12c/0x138 kthread from ret_from_fork+0x14/0x28 | |||||
| CVE-2026-43468 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix deadlock between devlink lock and esw->wq esw->work_queue executes esw_functions_changed_event_handler -> esw_vfs_changed_event_handler and acquires the devlink lock. .eswitch_mode_set (acquires devlink lock in devlink_nl_pre_doit) -> mlx5_devlink_eswitch_mode_set -> mlx5_eswitch_disable_locked -> mlx5_eswitch_event_handler_unregister -> flush_workqueue deadlocks when esw_vfs_changed_event_handler executes. Fix that by no longer flushing the work to avoid the deadlock, and using a generation counter to keep track of work relevance. This avoids an old handler manipulating an esw that has undergone one or more mode changes: - the counter is incremented in mlx5_eswitch_event_handler_unregister. - the counter is read and passed to the ephemeral mlx5_host_work struct. - the work handler takes the devlink lock and bails out if the current generation is different than the one it was scheduled to operate on. - mlx5_eswitch_cleanup does the final draining before destroying the wq. No longer flushing the workqueue has the side effect of maybe no longer cancelling pending vport_change_handler work items, but that's ok since those are disabled elsewhere: - mlx5_eswitch_disable_locked disables the vport eq notifier. - mlx5_esw_vport_disable disarms the HW EQ notification and marks vport->enabled under state_lock to false to prevent pending vport handler from doing anything. - mlx5_eswitch_cleanup destroys the workqueue and makes sure all events are disabled/finished. | |||||
| CVE-2026-43404 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm: Fix a hmm_range_fault() livelock / starvation problem If hmm_range_fault() fails a folio_trylock() in do_swap_page, trying to acquire the lock of a device-private folio for migration, to ram, the function will spin until it succeeds grabbing the lock. However, if the process holding the lock is depending on a work item to be completed, which is scheduled on the same CPU as the spinning hmm_range_fault(), that work item might be starved and we end up in a livelock / starvation situation which is never resolved. This can happen, for example if the process holding the device-private folio lock is stuck in migrate_device_unmap()->lru_add_drain_all() sinc lru_add_drain_all() requires a short work-item to be run on all online cpus to complete. A prerequisite for this to happen is: a) Both zone device and system memory folios are considered in migrate_device_unmap(), so that there is a reason to call lru_add_drain_all() for a system memory folio while a folio lock is held on a zone device folio. b) The zone device folio has an initial mapcount > 1 which causes at least one migration PTE entry insertion to be deferred to try_to_migrate(), which can happen after the call to lru_add_drain_all(). c) No or voluntary only preemption. This all seems pretty unlikely to happen, but indeed is hit by the "xe_exec_system_allocator" igt test. Resolve this by waiting for the folio to be unlocked if the folio_trylock() fails in do_swap_page(). Rename migration_entry_wait_on_locked() to softleaf_entry_wait_unlock() and update its documentation to indicate the new use-case. Future code improvements might consider moving the lru_add_drain_all() call in migrate_device_unmap() to be called *after* all pages have migration entries inserted. That would eliminate also b) above. v2: - Instead of a cond_resched() in hmm_range_fault(), eliminate the problem by waiting for the folio to be unlocked in do_swap_page() (Alistair Popple, Andrew Morton) v3: - Add a stub migration_entry_wait_on_locked() for the !CONFIG_MIGRATION case. (Kernel Test Robot) v4: - Rename migrate_entry_wait_on_locked() to softleaf_entry_wait_on_locked() and update docs (Alistair Popple) v5: - Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION version of softleaf_entry_wait_on_locked(). - Modify wording around function names in the commit message (Andrew Morton) (cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215) | |||||
| CVE-2026-43382 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must also be used instead and the lockless version __batadv_get_real_netdev() has to be called. | |||||
| CVE-2026-43327 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix locking/synchronization error Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup commits, was written specifically to prevent them. As it turns out, there are (at least) two errors remaining in the code. Another patch will address the second error; this one is concerned with the first. The error responsible for the syzbot crash occurred because the stop_activity() routine will sometimes drop and then re-acquire the dum->lock spinlock. A call to stop_activity() occurs in set_link_state() when handling an emulated USB reset, after the test of dum->ints_enabled and before the increment of dum->callback_usage. This allowed another thread (doing a driver unbind) to sneak in and grab the spinlock, and then clear dum->ints_enabled and dum->driver. Normally this other thread would have to wait for dum->callback_usage to go down to 0 before it would clear dum->driver, but in this case it didn't have to wait since dum->callback_usage had not yet been incremented. The fix is to increment dum->callback_usage _before_ calling stop_activity() instead of after. Then the thread doing the unbind will not clear dum->driver until after the call to usb_gadget_udc_reset() safely returns and dum->callback_usage has been decremented again. | |||||
| CVE-2026-43326 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback SCX_KICK_WAIT busy-waits in kick_cpus_irq_workfn() using smp_cond_load_acquire() until the target CPU's kick_sync advances. Because the irq_work runs in hardirq context, the waiting CPU cannot reschedule and its own kick_sync never advances. If multiple CPUs form a wait cycle, all CPUs deadlock. Replace the busy-wait in kick_cpus_irq_workfn() with resched_curr() to force the CPU through do_pick_task_scx(), which queues a balance callback to perform the wait. The balance callback drops the rq lock and enables IRQs following the sched_core_balance() pattern, so the CPU can process IPIs while waiting. The local CPU's kick_sync is advanced on entry to do_pick_task_scx() and continuously during the wait, ensuring any CPU that starts waiting for us sees the advancement and cannot form cyclic dependencies. | |||||
| CVE-2026-43319 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: spidev: fix lock inversion between spi_lock and buf_lock The spidev driver previously used two mutexes, spi_lock and buf_lock, but acquired them in different orders depending on the code path: write()/read(): buf_lock -> spi_lock ioctl(): spi_lock -> buf_lock This AB-BA locking pattern triggers lockdep warnings and can cause real deadlocks: WARNING: possible circular locking dependency detected spidev_ioctl() -> mutex_lock(&spidev->buf_lock) spidev_sync_write() -> mutex_lock(&spidev->spi_lock) *** DEADLOCK *** The issue is reproducible with a simple userspace program that performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from separate threads on the same spidev file descriptor. Fix this by simplifying the locking model and removing the lock inversion entirely. spidev_sync() no longer performs any locking, and all callers serialize access using spi_lock. buf_lock is removed since its functionality is fully covered by spi_lock, eliminating the possibility of lock ordering issues. This removes the lock inversion and prevents deadlocks without changing userspace ABI or behaviour. | |||||
| CVE-2026-43305 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix mismatched unlock for DMUB HW lock in HWSS fast path [Why] The evaluation for whether we need to use the DMUB HW lock isn't the same as whether we need to unlock which results in a hang when the fast path is used for ASIC without FAMS support. [How] Store a flag that indicates whether we should use the lock and use that same flag to specify whether unlocking is needed. | |||||
| CVE-2026-43296 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Workaround SQM/PSE stalls by disabling sticky NIX SQ manager sticky mode is known to cause stalls when multiple SQs share an SMQ and transmit concurrently. Additionally, PSE may deadlock on transitions between sticky and non-sticky transmissions. There is also a credit drop issue observed when certain condition clocks are gated. work around these hardware errata by: - Disabling SQM sticky operation: - Clear TM6 (bit 15) - Clear TM11 (bit 14) - Disabling sticky → non-sticky transition path that can deadlock PSE: - Clear TM5 (bit 23) - Preventing credit drops by keeping the control-flow clock enabled: - Set TM9 (bit 21) These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this configuration the SQM/PSE maintain forward progress under load without credit loss, at the cost of disabling sticky optimizations. | |||||
| CVE-2026-43252 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: in-kernel: always set ID as avail when rm endp Syzkaller managed to find a combination of actions that was generating this warning: WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535 Modules linked in: CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline] RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538 Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89 RSP: 0018:ffffc9001535b820 EFLAGS: 00010287 netdevsim0: tun_chr_ioctl cmd 1074025677 RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7 netdevsim0: linktype set to 823 RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800 FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000 netlink: 'syz.3.50': attribute type 5 has an invalid length. CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'. CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0 Call Trace: <TASK> mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline] mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282 genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:733 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2608 ___sys_sendmsg+0x2de/0x320 net/socket.c:2662 __sys_sendmsg net/socket.c:2694 [inline] __do_sys_sendmsg net/socket.c:2699 [inline] __se_sys_sendmsg net/socket.c:2697 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6adb66f6d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000 ---truncated--- | |||||
| CVE-2026-43147 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV" This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"), which causes a deadlock by recursively taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of pci_stop_and_remove_bus_device(). For example with the following sequence of commands: $ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs $ echo 1 > /sys/bus/pci/devices/<pf>/remove A trimmed trace of the deadlock on a mlx5 device is as below: zsh/5715 is trying to acquire lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140 but task is already holding lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80 ... Call Trace: [<00000259778c4f90>] dump_stack_lvl+0xc0/0x110 [<00000259779c844e>] print_deadlock_bug+0x31e/0x330 [<00000259779c1908>] __lock_acquire+0x16c8/0x32f0 [<00000259779bffac>] lock_acquire+0x14c/0x350 [<00000259789643a6>] __mutex_lock_common+0xe6/0x1520 [<000002597896413c>] mutex_lock_nested+0x3c/0x50 [<00000259784a07e4>] sriov_disable+0x34/0x140 [<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core] [<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core] [<00000259784857fc>] pci_device_remove+0x3c/0xa0 [<000002597851012e>] device_release_driver_internal+0x18e/0x280 [<000002597847ae22>] pci_stop_bus_device+0x82/0xa0 [<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80 [<00000259784972c2>] remove_store+0x72/0x90 [<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200 [<0000025977d7241c>] vfs_write+0x24c/0x300 [<0000025977d72696>] ksys_write+0x86/0x110 [<000002597895b61c>] __do_syscall+0x14c/0x400 [<000002597896e0ee>] system_call+0x6e/0x90 This alone is not a complete fix as it restores the issue the cited commit tried to solve. A new fix will be provided as a follow on. | |||||
| CVE-2026-43061 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized. | |||||
| CVE-2026-43029 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lockup in mptcp_recvmsg() syzbot reported a soft lockup in mptcp_recvmsg() [0]. When receiving data with MSG_PEEK | MSG_WAITALL flags, the skb is not removed from the sk_receive_queue. This causes sk_wait_data() to always find available data and never perform actual waiting, leading to a soft lockup. Fix this by adding a 'last' parameter to track the last peeked skb. This allows sk_wait_data() to make informed waiting decisions and prevent infinite loops when MSG_PEEK is used. [0]: watchdog: BUG: soft lockup - CPU#2 stuck for 156s! [server:1963] Modules linked in: CPU: 2 UID: 0 PID: 1963 Comm: server Not tainted 6.19.0-rc8 #61 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:sk_wait_data+0x15/0x190 Code: 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 41 56 41 55 41 54 49 89 f4 55 48 89 d5 53 48 89 fb <48> 83 ec 30 65 48 8b 05 17 a4 6b 01 48 89 44 24 28 31 c0 65 48 8b RSP: 0018:ffffc90000603ca0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888102bf0800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000603d18 RDI: ffff888102bf0800 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000101 R10: 0000000000000000 R11: 0000000000000075 R12: ffffc90000603d18 R13: ffff888102bf0800 R14: ffff888102bf0800 R15: 0000000000000000 FS: 00007f6e38b8c4c0(0000) GS:ffff8881b877e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa7bff1680 CR3: 0000000105cbe000 CR4: 00000000000006f0 Call Trace: <TASK> mptcp_recvmsg+0x547/0x8c0 net/mptcp/protocol.c:2329 inet_recvmsg+0x11f/0x130 net/ipv4/af_inet.c:891 sock_recvmsg+0x94/0xc0 net/socket.c:1100 __sys_recvfrom+0xb2/0x130 net/socket.c:2256 __x64_sys_recvfrom+0x1f/0x30 net/socket.c:2267 do_syscall_64+0x59/0x2d0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:131 RIP: 0033:0x7f6e386a4a1d Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8d 05 f1 de 2c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2d 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41 RSP: 002b:00007ffc3c4bb078 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 000000000000861e RCX: 00007f6e386a4a1d RDX: 00000000000003ff RSI: 00007ffc3c4bb150 RDI: 0000000000000004 RBP: 00007ffc3c4bb570 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000103 R11: 0000000000000246 R12: 00005605dbc00be0 R13: 00007ffc3c4bb650 R14: 0000000000000000 R15: 0000000000000000 </TASK> | |||||
| CVE-2026-31756 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop() dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro, which expects hsotg->lock to be held since it does spin_unlock/spin_lock around the gadget driver callback invocation. However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating() without holding the lock. This leads to: - spin_unlock on a lock that is not held (undefined behavior) - The lock remaining held after dwc2_gadget_exit_clock_gating() returns, causing a deadlock when spin_lock_irqsave() is called later in the same function. Fix this by acquiring hsotg->lock before calling dwc2_gadget_exit_clock_gating() and releasing it afterwards, which satisfies the locking requirement of the call_gadget() macro. | |||||
| CVE-2026-31687 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gpio: omap: do not register driver in probe() Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers the omap_mpuio_driver from omap_mpuio_init(), which is called from omap_gpio_probe(). However, it neither makes sense to register drivers from probe() callbacks of other drivers, nor does the driver core allow registering drivers with a device lock already being held. The latter was revealed by commit dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") leading to a potential deadlock condition described in [1]. Additionally, the omap_mpuio_driver is never unregistered from the driver core, even if the module is unloaded. Hence, register the omap_mpuio_driver from the module initcall and unregister it in module_exit(). | |||||
| CVE-2026-31509 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix circular locking dependency in nci_close_device nci_close_device() flushes rx_wq and tx_wq while holding req_lock. This causes a circular locking dependency because nci_rx_work() running on rx_wq can end up taking req_lock too: nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete -> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target -> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock) Move the flush of rx_wq after req_lock has been released. This should safe (I think) because NCI_UP has already been cleared and the transport is closed, so the work will see it and return -ENETDOWN. NIPA has been hitting this running the nci selftest with a debug kernel on roughly 4% of the runs. | |||||
| CVE-2026-31499 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del() l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer and id_addr_timer while holding conn->lock. However, the work functions l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire conn->lock, creating a potential AB-BA deadlock if the work is already executing when l2cap_conn_del() takes the lock. Move the work cancellations before acquiring conn->lock and use disable_delayed_work_sync() to additionally prevent the works from being rearmed after cancellation, consistent with the pattern used in hci_conn_del(). | |||||
| CVE-2026-31480 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential deadlock in cpu hotplug with osnoise The following sequence may leads deadlock in cpu hotplug: task1 task2 task3 ----- ----- ----- mutex_lock(&interface_lock) [CPU GOING OFFLINE] cpus_write_lock(); osnoise_cpu_die(); kthread_stop(task3); wait_for_completion(); osnoise_sleep(); mutex_lock(&interface_lock); cpus_read_lock(); [DEAD LOCK] Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock). | |||||
| CVE-2026-31467 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: erofs: add GFP_NOIO in the bio completion if needed The bio completion path in the process context (e.g. dm-verity) will directly call into decompression rather than trigger another workqueue context for minimal scheduling latencies, which can then call vm_map_ram() with GFP_KERNEL. Due to insufficient memory, vm_map_ram() may generate memory swapping I/O, which can cause submit_bio_wait to deadlock in some scenarios. Trimmed down the call stack, as follows: f2fs_submit_read_io submit_bio //bio_list is initialized. mmc_blk_mq_recovery z_erofs_endio vm_map_ram __pte_alloc_kernel __alloc_pages_direct_reclaim shrink_folio_list __swap_writepage submit_bio_wait //bio_list is non-NULL, hang!!! Use memalloc_noio_{save,restore}() to wrap up this path. | |||||