Total
75 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-74048 | 2026-10-29 | N/A | 6.5 MEDIUM | ||
| Not Failing Securely ('Failing Open') vulnerability in Apache Tomcat. If the OpenSSLLifecycleListener is configured to use FIPS mode but FIPS activation fails, Tomcat logs and error but continues to use JSSE in non-FIPS mode with the provided configuration. This issue affects Apache Tomcat: from 11.0.0-M14 through 11.0.26, from 10.1.22 through 10.1.60, from 9.0.92 through 9.0.122. Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. | |||||
| CVE-2026-110985 | 2026-10-29 | N/A | N/A | ||
| A Kafka broker using SASL/OAUTHBEARER with the default validator (sasl.oauthbearer.jwt.validator.class=DefaultJwtValidator) selects its implementation from configuration. When sasl.oauthbearer.jwks.endpoint.url is set, the validator verifies the JWT signature. When that URL is unset (the default) and no verification key resolver is supplied, DefaultJwtValidator silently falls back to ClientJwtValidator, which does not verify the JWT signature, algorithm, or issuer - and the broker starts with no warning or error. This is the residual of CVE-2026-33557, whose fix restored signature verification only on the path where the JWKS endpoint URL is set. Impact: A broker in this state accepts any structurally valid JWT, including "alg":"none" tokens. An unauthenticated remote attacker who can reach the listener can forge a token asserting any principal - including configured superusers - and gain full access to the cluster. Only brokers that enable SASL/OAUTHBEARER validation without a JWKS endpoint URL (and without a custom verification key resolver) are affected; brokers that set the URL verify signatures and are not affected. Unlike CVE-2026-110952 (issuer/audience not enforced by default), here no signature is verified at all. Mitigation (all affected versions, no upgrade required): Set sasl.oauthbearer.jwks.endpoint.url for every listener/mechanism that uses OAuthBearerValidatorCallbackHandler, or configure a signature-verifying sasl.oauthbearer.jwt.validator.class. Resolution: From Apache Kafka 4.2.2, 4.3.1, and 4.4.0: a broker that would fall back to the non-verifying ClientJwtValidator fails to start with a ConfigException instead of running without signature verification (secure by default). | |||||
| CVE-2026-50528 | 3 Apple, Linux, Microsoft | 6 Macos, Linux Kernel, .net and 3 more | 2026-10-28 | N/A | 8.2 HIGH |
| Incorrect authorization in .NET allows an unauthorized attacker to bypass a security feature over a network. | |||||
| CVE-2026-108142 | 2026-10-28 | N/A | N/A | ||
| A vulnerability allowing an unauthenticated attacker to bypass authorization on the CDP Coordinator Service. | |||||
| CVE-2026-45781 | 2026-10-26 | N/A | 3.5 LOW | ||
| The MCP Registry provides MCP clients with a list of MCP servers, like an app store for MCP servers. Prior to 1.7.9, OCI ownership validation skips label-match check when upstream OCI registry returns HTTP 429, letting any authenticated publisher bind their io.github.<user>/* namespace to OCI images they do not control. internal/validators/registries/oci.go:104-119 fails open on http.StatusTooManyRequests: when the registry's anonymous fetch to the upstream OCI registry is rate-limited, ValidateOCI returns nil and the publish is accepted without ever running the io.modelcontextprotocol.server.name label-match check at lines 122-141. That label check is the only cross-system ownership proof the registry applies to OCI packages — every other registry type (NPM, PyPI, NuGet, MCPB) treats a non-200 upstream response as a hard error. This vulnerability is fixed in 1.7.9. | |||||
| CVE-2026-40525 | 1 Volcengine | 1 Openviking | 2026-10-26 | N/A | 9.1 CRITICAL |
| OpenViking prior to version 0.3.9 contains an authentication bypass vulnerability in the VikingBot OpenAPI HTTP route surface where the authentication check fails open when the api_key configuration value is unset or empty. Remote attackers with network access to the exposed service can invoke privileged bot-control functionality without providing a valid X-API-Key header, including submitting attacker-controlled prompts, creating or using bot sessions, and accessing downstream tools, integrations, secrets, or data accessible to the bot. | |||||
| CVE-2026-62235 | 2026-10-24 | N/A | 6.3 MEDIUM | ||
| Grav Flex-Objects before version 1.4.3 contains a broken access control vulnerability in the admin-next REST API that allows authenticated users with only api.access permission to perform unauthorized CRUD operations on permission-less directories. Attackers with api.access credentials can create, read, update, delete, and export objects from any directory lacking an explicit permissions configuration, bypassing intended authorization controls. | |||||
| CVE-2026-53712 | 2026-10-24 | N/A | N/A | ||
| SCRAM (Salted Challenge Response Authentication Mechanism) is part of the family of Simple Authentication and Security Layer (SASL, RFC 4422) authentication mechanisms. Prior to 3.3, a flaw in com.ongres.scram:scram-client and com.ongres.scram:scram-common allows an attacker capable of a TLS man-in-the-middle attack to silently downgrade a connection from SCRAM-SHA-256-PLUS with channel binding to standard SCRAM-SHA-256 without channel binding when TlsServerEndpoint processes an X.509 certificate using a modern signature algorithm such as Ed25519; getChannelBindingData() can return an empty byte array after NoSuchAlgorithmException, and the ScramClient builder treats that as absent channel-binding data. This issue is fixed in version 3.3. | |||||
| CVE-2026-69306 | 1 Microsoft | 1 Visual Studio Code | 2026-10-24 | N/A | 8.2 HIGH |
| Not failing securely ('failing open') in Visual Studio Code allows an unauthorized attacker to bypass a security feature over a network. | |||||
| CVE-2026-70452 | 2026-10-24 | N/A | 7.4 HIGH | ||
| rsync 3.1.0 before 3.5.0 contains an access control bypass vulnerability that allows remote attackers to circumvent hosts deny rules by inducing DNS resolution failures during hostname-based access control evaluation. When a DNS lookup for a hostname-based deny rule fails, the daemon skips the rule rather than defaulting to a deny decision, enabling attackers who can trigger DNS failures to bypass module-level IP access controls and gain unauthorized access to restricted module file trees. | |||||
| CVE-2026-68746 | 1 Livebook | 1 Livebook | 2026-10-24 | N/A | 8.8 HIGH |
| Not Failing Securely ('Failing Open') vulnerability in livebook-dev livebook allows an unauthenticated network client to obtain full access to a Livebook server that enforces identity through Livebook Teams. A Livebook Agent or App Server connected to Livebook Teams caches the identifier of the deployment group it belongs to, and resolves that identifier against a locally cached list of deployment groups on every request in order to decide whether Teams identity enforcement is active. Livebook.Hubs.TeamClient.handle_call/3 in lib/livebook/hubs/team_client.ex does not distinguish a deployment group that could not be resolved from one that was resolved with identity enforcement switched off: the clause matches only the case where a group was found with enforcement enabled, and falls through to a catch-all that reports enforcement as switched off for everything else. The two neighbouring functions that decide user and application access resolve the same identifier and treat the same unresolved result as a denial. When the identity status is reported as switched off, Livebook.ZTA.LivebookTeams.authenticate/3 in lib/livebook/zta/livebook_teams.ex returns empty identity metadata and allows the request to continue instead of halting it. LivebookWeb.UserPlug.build_current_user/3 merges that empty metadata into a newly built user, whose access type defaults to full access, and LivebookWeb.AuthPlug.authorized?/1 grants access to any user holding full access. The cached identifier becomes unresolvable when the deployment group it refers to is deleted while the agent is not connected to receive the change, most concretely when a deployment group is deleted during the window in which an agent is disconnected or reconnecting. The client removes the group from its cached list without clearing the identifier that refers to it. Any client able to reach the affected server over the network is then granted the same access as a fully privileged member of the organisation, including the ability to read notebooks and configured secrets, execute code on the server's runtime, and disrupt its operation. This issue affects livebook: from 0.19.7 before 0.19.9. | |||||
| CVE-2026-53852 | 1 Openclaw | 1 Openclaw | 2026-10-24 | N/A | 5.4 MEDIUM |
| OpenClaw before 2026.4.25 contains a scope containment bypass vulnerability in device re-pairing that allows authenticated operators to restore broader scopes than intended by submitting empty-scope re-pairing requests. Attackers can exploit this by sending re-pairing requests with empty scope sets to skip containment guards and retain unauthorized device access. | |||||
| CVE-2026-35042 | 1 Nearform | 1 Fast-jwt | 2026-10-24 | N/A | 7.5 HIGH |
| fast-jwt provides fast JSON Web Token (JWT) implementation. In 6.1.0 and earlier, fast-jwt does not validate the crit (Critical) Header Parameter defined in RFC 7515 §4.1.11. When a JWS token contains a crit array listing extensions that fast-jwt does not understand, the library accepts the token instead of rejecting it. This violates the MUST requirement in the RFC. | |||||
| CVE-2026-105933 | 2026-10-23 | N/A | N/A | ||
| Apache Pulsar allows an administrator to require end-to-end message encryption for all topics in a namespace by setting the encryption_required namespace policy. When this policy is set, the broker rejects messages that are published without encryption. When the broker loads a persistent topic, it reads the namespace policies and the topic-level policies as part of topic initialization. If a step of this initialization fails, for example because of an error reading from the metadata store, a failure loading the topic-level policies or a failure in a later initialization step, the broker logs a warning, disables the encryption requirement for that topic, and completes the topic load as if it had succeeded. The topic is then served with encryption_required not enforced, even though the namespace policy requires it. Topic-level policies that could not be loaded are also not applied. While the encryption requirement is not enforced, an authenticated client with permission to produce to the affected topic can publish messages that are not encrypted, and the broker accepts and stores them. This applies both to producers created after the topic was loaded and to producers that were already connected. Messages published with encryption remain encrypted; the issue does not expose the content of encrypted messages or the encryption keys. The condition is not limited to transient failures. If the cause of the initialization failure persists, the encryption requirement is disabled again each time the topic is loaded, for example after a topic unload, a namespace bundle reassignment or a broker restart. An update to the namespace policies restores enforcement on a loaded topic, but only until the topic is loaded again. Enforcement is reliably restored only once the underlying cause of the failure has been resolved and the topic has been loaded again. The broker logs a warning when the encryption requirement is disabled, but the topic load is reported as successful and the state of the encryption requirement is not shown in the topic statistics. In fixed versions, a failure during topic initialization causes the topic load to fail so that it can be retried, instead of loading the topic with the encryption requirement disabled. This issue affects Apache Pulsar versions from 1.22.0-incubating before 4.0.14 and from 4.1.0 before 4.2.5. - 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5. Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/. Users who rely on encryption_required and cannot upgrade immediately can monitor the broker logs for warnings containing "isEncryptionRequired will be set to false" (the exact wording of the message differs between releases), resolve the underlying cause of the failure, and then reload the affected topic and confirm that the warning does not recur. | |||||
| CVE-2026-114479 | 2026-10-22 | N/A | 5.8 MEDIUM | ||
| Not failing securely in the anti-virus attachment-stripping action of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have a message that the server's virus scanner found infected delivered to the recipient's mailbox unchanged. With virus scanning enabled and its action set to remove attachments and deliver the text (the default action deletes the message), the server keeps one text part of an infected message and replaces every attachment with a note. A message whose single part is not text - a program or an archive sent as the whole message, a message carried whole, a file declared an attachment, or an S/MIME message signed as one part, whose content the recipient's mail client opens - had no part the action could pick out, and was delivered as it arrived, with the content the scanner had found and nothing but a line in the application log to show it. Any sender can write such a message. | |||||
| CVE-2026-103502 | 2026-10-16 | N/A | N/A | ||
| Improper Certificate Validation vulnerability in hexpm hex_core allows an attacker who can intercept HTTPS connections to impersonate hex.pm, repo.hex.pm or any other repository or API server to programs that use hex_core's default HTTP adapter on Erlang/OTP 24, or on OTP 25 when the operating system's CA certificates can't be loaded. hex_core:default_config/0 selects the built-in hex_http_httpc adapter. For an HTTPS request whose adapter config has no ssl option, hex_http_httpc:http_options/2 builds options that verify the server certificate against public_key:cacerts_get/0. When that call raises, the adapter prints a warning and sends the request without ssl options, so httpc uses the defaults of the ssl application, which before OTP 26 don't verify the server certificate. public_key:cacerts_get/0 doesn't exist on OTP 24, so every HTTPS request falls back there, and on OTP 25 it raises when no CA store is found. hex_core versions before 0.11.0 never set ssl options, so they don't verify the server certificate on OTP 25 and earlier whether or not a CA store is found. The fallback was intended and documented, but the documentation didn't make clear that it meant no certificate verification. Since hex_core 0.8.2 the README has warned that the built-in httpc adapter "has insecure default settings" and recommended other HTTP clients, and the adapter prints "using default ssl options which are insecure" on every request that falls back. hex_core 0.11.0 added certificate verification with the changelog entry "Use secure SSL defaults for OTP 25+". Neither the README nor the warning says that the server certificate isn't verified, the README doesn't say which OTP versions the warning applies to, and on OTP 25 without CA certificates the warning tells users to upgrade to OTP 25 or later, which they already run. This advisory is published so that users who took those notices as general advice know their HTTPS requests weren't authenticated. This issue affects hex_core: from 0.1.0 before 0.20.0. | |||||
| CVE-2026-78022 | 1 Dell | 1 Policy Manager For Secure Connect Gateway | 2026-10-13 | N/A | 6.8 MEDIUM |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains a Not Failing Securely ('Failing Open') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Protection mechanism bypass. | |||||
| CVE-2026-107735 | 2026-10-09 | N/A | N/A | ||
| SumatraPDF is a multi-format reader for Windows. In 3.6.1 and earlier, InitializePolicies() starts the sumatrapdfrestrict.ini path with gPolicyRestrictions set to Perm::All and only ORs permission bits, so the INI file never revokes permissions. Deploying SumatraPDF with this INI file, including a malformed file or zero-valued permission settings, can silently bypass configured disk, network, printing, registry, clipboard, preference, and fullscreen restrictions. The -restrict command-line path works correctly and is not affected. No fixed version is available as of this review. | |||||
| CVE-2026-107584 | 2026-10-08 | N/A | 7.4 HIGH | ||
| Progressive Robot hMailServer 6.0.0 through 6.3.5 fails open when applying DANE (RFC 7672) to outbound SMTP delivery. The server's validating DNSSEC resolver treated a TLSA or MX lookup that did not complete (no answer, SERVFAIL, a malformed reply), an answer without the requested records and without an NSEC/NSEC3 proof of their absence, and an answer whose records carried no applicable RRSIG as if the recipient domain were unsigned, and from 6.2.19 it also delivered to mail exchangers taken from an unvalidated MX lookup that the DNSSEC-validated MX record set did not name. An attacker who can drop, forge or strip DNS answers on the path to the server's resolver, at the resolver, or between the resolver and the recipient domain's name servers, and who holds an active position on the SMTP path, can thereby disable DANE for a DNSSEC-signed recipient domain and cause messages to be delivered in cleartext or to a host of the attacker's choosing with an arbitrary certificate, where they can be read and modified. | |||||
| CVE-2026-107314 | 2026-10-08 | N/A | 5.9 MEDIUM | ||
| pgjdbc, the PostgreSQL JDBC Driver, versions 42.7.11 through 42.7.13 enforce no restriction when the requireAuth connection property excludes all six authentication methods the driver knows, for example requireAuth=!password,!md5,!gss,!sspi,!scram-sha-256,!none. The driver then accepts any method the server asks for, including cleartext password authentication. A value without a method in it, such as requireAuth=, (a single comma), is affected the same way. An attacker positioned between the application and its server can ask for cleartext password authentication and receive the database password. A positive list such as requireAuth=scram-sha-256, and a partial exclusion such as requireAuth=!password,!md5, are enforced correctly. The property has no default value, so a deployment that does not set it is not affected. 42.7.14 fixes the problem: such a connection is refused with SQLState 08004, and a value without a method in it is rejected as invalid. | |||||