Total
8670 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38485 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with iio_for_each_active_channel()) without making sure the indio_dev stays in buffer mode. There is a race if indio_dev exits buffer mode in the middle of the interrupt that flushes the fifo. Fix this by calling synchronize_irq() to ensure that no interrupt is currently running when disabling buffer mode. Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [...] _find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290 fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178 fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c irq_thread_fn from irq_thread+0x110/0x1f4 irq_thread from kthread+0xe0/0xfc kthread from ret_from_fork+0x14/0x2c | |||||
| CVE-2025-38476 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: rpl: Fix use-after-free in rpl_do_srh_inline(). Running lwt_dst_cache_ref_loop.sh in selftest with KASAN triggers the splat below [0]. rpl_do_srh_inline() fetches ipv6_hdr(skb) and accesses it after skb_cow_head(), which is illegal as the header could be freed then. Let's fix it by making oldhdr to a local struct instead of a pointer. [0]: [root@fedora net]# ./lwt_dst_cache_ref_loop.sh ... TEST: rpl (input) [ 57.631529] ================================================================== BUG: KASAN: slab-use-after-free in rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174) Read of size 40 at addr ffff888122bf96d8 by task ping6/1543 CPU: 50 UID: 0 PID: 1543 Comm: ping6 Not tainted 6.16.0-rc5-01302-gfadd1e6231b1 #23 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636) kasan_check_range (mm/kasan/generic.c:175 (discriminator 1) mm/kasan/generic.c:189 (discriminator 1)) __asan_memmove (mm/kasan/shadow.c:94 (discriminator 2)) rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174) rpl_input (net/ipv6/rpl_iptunnel.c:201 net/ipv6/rpl_iptunnel.c:282) lwtunnel_input (net/core/lwtunnel.c:459) ipv6_rcv (./include/net/dst.h:471 (discriminator 1) ./include/net/dst.h:469 (discriminator 1) net/ipv6/ip6_input.c:79 (discriminator 1) ./include/linux/netfilter.h:317 (discriminator 1) ./include/linux/netfilter.h:311 (discriminator 1) net/ipv6/ip6_input.c:311 (discriminator 1)) __netif_receive_skb_one_core (net/core/dev.c:5967) process_backlog (./include/linux/rcupdate.h:869 net/core/dev.c:6440) __napi_poll.constprop.0 (net/core/dev.c:7452) net_rx_action (net/core/dev.c:7518 net/core/dev.c:7643) handle_softirqs (kernel/softirq.c:579) do_softirq (kernel/softirq.c:480 (discriminator 20)) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:407) __dev_queue_xmit (net/core/dev.c:4740) ip6_finish_output2 (./include/linux/netdevice.h:3358 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv6/ip6_output.c:141) ip6_finish_output (net/ipv6/ip6_output.c:215 net/ipv6/ip6_output.c:226) ip6_output (./include/linux/netfilter.h:306 net/ipv6/ip6_output.c:248) ip6_send_skb (net/ipv6/ip6_output.c:1983) rawv6_sendmsg (net/ipv6/raw.c:588 net/ipv6/raw.c:918) __sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1)) __x64_sys_sendto (net/socket.c:2231) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f68cffb2a06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007ffefb7c53d0 EFLAGS: 00000202 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000564cd69f10a0 RCX: 00007f68cffb2a06 RDX: 0000000000000040 RSI: 0000564cd69f10a4 RDI: 0000000000000003 RBP: 00007ffefb7c53f0 R08: 0000564cd6a032ac R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000202 R12: 0000564cd69f10a4 R13: 0000000000000040 R14: 00007ffefb7c66e0 R15: 0000564cd69f10a0 </TASK> Allocated by task 1543: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:319 mm/kasan/common.c:345) kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249) kmalloc_reserve (net/core/skbuff.c:581 (discriminator 88)) __alloc_skb (net/core/skbuff.c:669) __ip6_append_data (net/ipv6/ip6_output.c:1672 (discriminator 1)) ip6_ ---truncated--- | |||||
| CVE-2025-38471 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: tls: always refresh the queue when reading sock After recent changes in net-next TCP compacts skbs much more aggressively. This unearthed a bug in TLS where we may try to operate on an old skb when checking if all skbs in the queue have matching decrypt state and geometry. BUG: KASAN: slab-use-after-free in tls_strp_check_rcv+0x898/0x9a0 [tls] (net/tls/tls_strp.c:436 net/tls/tls_strp.c:530 net/tls/tls_strp.c:544) Read of size 4 at addr ffff888013085750 by task tls/13529 CPU: 2 UID: 0 PID: 13529 Comm: tls Not tainted 6.16.0-rc5-virtme Call Trace: kasan_report+0xca/0x100 tls_strp_check_rcv+0x898/0x9a0 [tls] tls_rx_rec_wait+0x2c9/0x8d0 [tls] tls_sw_recvmsg+0x40f/0x1aa0 [tls] inet_recvmsg+0x1c3/0x1f0 Always reload the queue, fast path is to have the record in the queue when we wake, anyway (IOW the path going down "if !strp->stm.full_len"). | |||||
| CVE-2025-38464 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free in tipc_conn_close(). syzbot reported a null-ptr-deref in tipc_conn_close() during netns dismantle. [0] tipc_topsrv_stop() iterates tipc_net(net)->topsrv->conn_idr and calls tipc_conn_close() for each tipc_conn. The problem is that tipc_conn_close() is called after releasing the IDR lock. At the same time, there might be tipc_conn_recv_work() running and it could call tipc_conn_close() for the same tipc_conn and release its last ->kref. Once we release the IDR lock in tipc_topsrv_stop(), there is no guarantee that the tipc_conn is alive. Let's hold the ref before releasing the lock and put the ref after tipc_conn_close() in tipc_topsrv_stop(). [0]: BUG: KASAN: use-after-free in tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 Read of size 8 at addr ffff888099305a08 by task kworker/u4:3/435 CPU: 0 PID: 435 Comm: kworker/u4:3 Not tainted 4.19.204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1fc/0x2ef lib/dump_stack.c:118 print_address_description.cold+0x54/0x219 mm/kasan/report.c:256 kasan_report_error.cold+0x8a/0x1b9 mm/kasan/report.c:354 kasan_report mm/kasan/report.c:412 [inline] __asan_report_load8_noabort+0x88/0x90 mm/kasan/report.c:433 tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 tipc_topsrv_stop net/tipc/topsrv.c:701 [inline] tipc_topsrv_exit_net+0x27b/0x5c0 net/tipc/topsrv.c:722 ops_exit_list+0xa5/0x150 net/core/net_namespace.c:153 cleanup_net+0x3b4/0x8b0 net/core/net_namespace.c:553 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Allocated by task 23: kmem_cache_alloc_trace+0x12f/0x380 mm/slab.c:3625 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] tipc_conn_alloc+0x43/0x4f0 net/tipc/topsrv.c:192 tipc_topsrv_accept+0x1b5/0x280 net/tipc/topsrv.c:470 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Freed by task 23: __cache_free mm/slab.c:3503 [inline] kfree+0xcc/0x210 mm/slab.c:3822 tipc_conn_kref_release net/tipc/topsrv.c:150 [inline] kref_put include/linux/kref.h:70 [inline] conn_put+0x2cd/0x3a0 net/tipc/topsrv.c:155 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 The buggy address belongs to the object at ffff888099305a00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff888099305a00, ffff888099305c00) The buggy address belongs to the page: page:ffffea000264c140 count:1 mapcount:0 mapping:ffff88813bff0940 index:0x0 flags: 0xfff00000000100(slab) raw: 00fff00000000100 ffffea00028b6b88 ffffea0002cd2b08 ffff88813bff0940 raw: 0000000000000000 ffff888099305000 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888099305900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888099305a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888099305a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb | |||||
| CVE-2025-38449 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/gem: Acquire references on GEM handles for framebuffers A GEM handle can be released while the GEM buffer object is attached to a DRM framebuffer. This leads to the release of the dma-buf backing the buffer object, if any. [1] Trying to use the framebuffer in further mode-setting operations leads to a segmentation fault. Most easily happens with driver that use shadow planes for vmap-ing the dma-buf during a page flip. An example is shown below. [ 156.791968] ------------[ cut here ]------------ [ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430 [...] [ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430 [ 157.043420] Call Trace: [ 157.045898] <TASK> [ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0 [ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0 [ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0 [ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710 [ 157.065567] ? dma_buf_vmap+0x224/0x430 [ 157.069446] ? __warn.cold+0x58/0xe4 [ 157.073061] ? dma_buf_vmap+0x224/0x430 [ 157.077111] ? report_bug+0x1dd/0x390 [ 157.080842] ? handle_bug+0x5e/0xa0 [ 157.084389] ? exc_invalid_op+0x14/0x50 [ 157.088291] ? asm_exc_invalid_op+0x16/0x20 [ 157.092548] ? dma_buf_vmap+0x224/0x430 [ 157.096663] ? dma_resv_get_singleton+0x6d/0x230 [ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10 [ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10 [ 157.110697] drm_gem_shmem_vmap+0x74/0x710 [ 157.114866] drm_gem_vmap+0xa9/0x1b0 [ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0 [ 157.123086] drm_gem_fb_vmap+0xab/0x300 [ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10 [ 157.133032] ? lockdep_init_map_type+0x19d/0x880 [ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0 [ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180 [ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40 [...] [ 157.346424] ---[ end trace 0000000000000000 ]--- Acquiring GEM handles for the framebuffer's GEM buffer objects prevents this from happening. The framebuffer's cleanup later puts the handle references. Commit 1a148af06000 ("drm/gem-shmem: Use dma_buf from GEM object instance") triggers the segmentation fault easily by using the dma-buf field more widely. The underlying issue with reference counting has been present before. v2: - acquire the handle instead of the BO (Christian) - fix comment style (Christian) - drop the Fixes tag (Christian) - rename err_ gotos - add missing Link tag | |||||
| CVE-2025-38437 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potential use-after-free in oplock/lease break ack If ksmbd_iov_pin_rsp return error, use-after-free can happen by accessing opinfo->state and opinfo_put and ksmbd_fd_put could called twice. | |||||
| CVE-2025-38386 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Refuse to evaluate a method if arguments are missing As reported in [1], a platform firmware update that increased the number of method parameters and forgot to update a least one of its callers, caused ACPICA to crash due to use-after-free. Since this a result of a clear AML issue that arguably cannot be fixed up by the interpreter (it cannot produce missing data out of thin air), address it by making ACPICA refuse to evaluate a method if the caller attempts to pass fewer arguments than expected to it. | |||||
| CVE-2025-38377 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: rose: fix dangling neighbour pointers in rose_rt_device_down() There are two bugs in rose_rt_device_down() that can cause use-after-free: 1. The loop bound `t->count` is modified within the loop, which can cause the loop to terminate early and miss some entries. 2. When removing an entry from the neighbour array, the subsequent entries are moved up to fill the gap, but the loop index `i` is still incremented, causing the next entry to be skipped. For example, if a node has three neighbours (A, A, B) with count=3 and A is being removed, the second A is not checked. i=0: (A, A, B) -> (A, B) with count=2 ^ checked i=1: (A, B) -> (A, B) with count=2 ^ checked (B, not A!) i=2: (doesn't occur because i < count is false) This leaves the second A in the array with count=2, but the rose_neigh structure has been freed. Code that accesses these entries assumes that the first `count` entries are valid pointers, causing a use-after-free when it accesses the dangling pointer. Fix both issues by iterating over the array in reverse order with a fixed loop bound. This ensures that all entries are examined and that the removal of an entry doesn't affect subsequent iterations. | |||||
| CVE-2025-38350 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Always pass notifications when child class becomes empty Certain classful qdiscs may invoke their classes' dequeue handler on an enqueue operation. This may unexpectedly empty the child qdisc and thus make an in-flight class passive via qlen_notify(). Most qdiscs do not expect such behaviour at this point in time and may re-activate the class eventually anyways which will lead to a use-after-free. The referenced fix commit attempted to fix this behavior for the HFSC case by moving the backlog accounting around, though this turned out to be incomplete since the parent's parent may run into the issue too. The following reproducer demonstrates this use-after-free: tc qdisc add dev lo root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo parent 1: classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1 tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0 tc qdisc add dev lo parent 2:1 handle 3: netem tc qdisc add dev lo parent 3:1 handle 4: blackhole echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888 tc class delete dev lo classid 1:1 echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888 Since backlog accounting issues leading to a use-after-frees on stale class pointers is a recurring pattern at this point, this patch takes a different approach. Instead of trying to fix the accounting, the patch ensures that qdisc_tree_reduce_backlog always calls qlen_notify when the child qdisc is empty. This solves the problem because deletion of qdiscs always involves a call to qdisc_reset() and / or qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing the following qdisc_tree_reduce_backlog() to report to the parent. Note that this may call qlen_notify on passive classes multiple times. This is not a problem after the recent patch series that made all the classful qdiscs qlen_notify() handlers idempotent. | |||||
| CVE-2025-38349 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: eventpoll: don't decrement ep refcount while still holding the ep mutex Jann Horn points out that epoll is decrementing the ep refcount and then doing a mutex_unlock(&ep->mtx); afterwards. That's very wrong, because it can lead to a use-after-free. That pattern is actually fine for the very last reference, because the code in question will delay the actual call to "ep_free(ep)" until after it has unlocked the mutex. But it's wrong for the much subtler "next to last" case when somebody *else* may also be dropping their reference and free the ep while we're still using the mutex. Note that this is true even if that other user is also using the same ep mutex: mutexes, unlike spinlocks, can not be used for object ownership, even if they guarantee mutual exclusion. A mutex "unlock" operation is not atomic, and as one user is still accessing the mutex as part of unlocking it, another user can come in and get the now released mutex and free the data structure while the first user is still cleaning up. See our mutex documentation in Documentation/locking/mutex-design.rst, in particular the section [1] about semantics: "mutex_unlock() may access the mutex structure even after it has internally released the lock already - so it's not safe for another context to acquire the mutex and assume that the mutex_unlock() context is not using the structure anymore" So if we drop our ep ref before the mutex unlock, but we weren't the last one, we may then unlock the mutex, another user comes in, drops _their_ reference and releases the 'ep' as it now has no users - all while the mutex_unlock() is still accessing it. Fix this by simply moving the ep refcount dropping to outside the mutex: the refcount itself is atomic, and doesn't need mutex protection (that's the whole _point_ of refcounts: unlike mutexes, they are inherently about object lifetimes). | |||||
| CVE-2025-38346 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix UAF when lookup kallsym after ftrace disabled The following issue happens with a buggy module: BUG: unable to handle page fault for address: ffffffffc05d0218 PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS RIP: 0010:sized_strscpy+0x81/0x2f0 RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000 RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68 R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038 R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ftrace_mod_get_kallsym+0x1ac/0x590 update_iter_mod+0x239/0x5b0 s_next+0x5b/0xa0 seq_read_iter+0x8c9/0x1070 seq_read+0x249/0x3b0 proc_reg_read+0x1b0/0x280 vfs_read+0x17f/0x920 ksys_read+0xf3/0x1c0 do_syscall_64+0x5f/0x2e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The above issue may happen as follows: (1) Add kprobe tracepoint; (2) insmod test.ko; (3) Module triggers ftrace disabled; (4) rmmod test.ko; (5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed; ftrace_mod_get_kallsym() ... strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); ... The problem is when a module triggers an issue with ftrace and sets ftrace_disable. The ftrace_disable is set when an anomaly is discovered and to prevent any more damage, ftrace stops all text modification. The issue that happened was that the ftrace_disable stops more than just the text modification. When a module is loaded, its init functions can also be traced. Because kallsyms deletes the init functions after a module has loaded, ftrace saves them when the module is loaded and function tracing is enabled. This allows the output of the function trace to show the init function names instead of just their raw memory addresses. When a module is removed, ftrace_release_mod() is called, and if ftrace_disable is set, it just returns without doing anything more. The problem here is that it leaves the mod_list still around and if kallsyms is called, it will call into this code and access the module memory that has already been freed as it will return: strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); Where the "mod" no longer exists and triggers a UAF bug. | |||||
| CVE-2025-38250 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix use-after-free in vhci_flush() syzbot reported use-after-free in vhci_flush() without repro. [0] From the splat, a thread close()d a vhci file descriptor while its device was being used by iotcl() on another thread. Once the last fd refcnt is released, vhci_release() calls hci_unregister_dev(), hci_free_dev(), and kfree() for struct vhci_data, which is set to hci_dev->dev->driver_data. The problem is that there is no synchronisation after unlinking hdev from hci_dev_list in hci_unregister_dev(). There might be another thread still accessing the hdev which was fetched before the unlink operation. We can use SRCU for such synchronisation. Let's run hci_dev_reset() under SRCU and wait for its completion in hci_unregister_dev(). Another option would be to restore hci_dev->destruct(), which was removed in commit 587ae086f6e4 ("Bluetooth: Remove unused hci-destruct cb"). However, this would not be a good solution, as we should not run hci_unregister_dev() while there are in-flight ioctl() requests, which could lead to another data-race KCSAN splat. Note that other drivers seem to have the same problem, for exmaple, virtbt_remove(). [0]: BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718 CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 skb_queue_purge include/linux/skbuff.h:3368 [inline] vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69 hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline] hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592 sock_do_ioctl+0xd9/0x300 net/socket.c:1190 sock_ioctl+0x576/0x790 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcf5b98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929 RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009 RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528 </TASK> Allocated by task 6535: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635 misc_open+0x2bc/0x330 drivers/char/misc.c:161 chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414 do_dentry_open+0xdf0/0x1970 fs/open.c:964 vfs_open+0x3b/0x340 fs/open.c:1094 do_open fs/namei.c:3887 [inline] path_openat+0x2ee5/0x3830 fs/name ---truncated--- | |||||
| CVE-2025-38248 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack ---truncated--- | |||||
| CVE-2025-38236 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't leave consecutive consumed OOB skbs. Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_ ---truncated--- | |||||
| CVE-2025-38227 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated--- | |||||
| CVE-2025-38212 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned(). | |||||
| CVE-2025-38211 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") simplified cm_id resource management by freeing cm_id once all references to the cm_id were removed. The references are removed either upon completion of iw_cm event handlers or when the application destroys the cm_id. This commit introduced the use-after-free condition where cm_id_private object could still be in use by event handler works during the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") addressed this use-after- free by flushing all pending works at the cm_id destruction. However, still another use-after-free possibility remained. It happens with the work objects allocated for each cm_id_priv within alloc_work_entries() during cm_id creation, and subsequently freed in dealloc_work_entries() once all references to the cm_id are removed. If the cm_id's last reference is decremented in the event handler work, the work object for the work itself gets removed, and causes the use- after-free BUG below: BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250 Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091 CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Workqueue: 0x0 (iw_cm_wq) Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_report+0x174/0x554 ? __virt_addr_valid+0x208/0x430 ? __pwq_activate_work+0x1ff/0x250 kasan_report+0xae/0x170 ? __pwq_activate_work+0x1ff/0x250 __pwq_activate_work+0x1ff/0x250 pwq_dec_nr_in_flight+0x8c5/0xfb0 process_one_work+0xc11/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5ef/0xfd0 ? __pfx_worker_thread+0x10/0x10 kthread+0x3b0/0x770 ? __pfx_kthread+0x10/0x10 ? rcu_is_watching+0x11/0xb0 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 147416: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 alloc_work_entries+0xa9/0x260 [iw_cm] iw_cm_connect+0x23/0x4a0 [iw_cm] rdma_connect_locked+0xbfd/0x1920 [rdma_cm] nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma] cma_cm_event_handler+0xae/0x320 [rdma_cm] cma_work_handler+0x106/0x1b0 [rdma_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 147091: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kfree+0x13a/0x4b0 dealloc_work_entries+0x125/0x1f0 [iw_cm] iwcm_deref_id+0x6f/0xa0 [iw_cm] cm_work_handler+0x136/0x1ba0 [iw_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x2c/0x50 kasan_record_aux_stack+0xa3/0xb0 __queue_work+0x2ff/0x1390 queue_work_on+0x67/0xc0 cm_event_handler+0x46a/0x820 [iw_cm] siw_cm_upcall+0x330/0x650 [siw] siw_cm_work_handler+0x6b9/0x2b20 [siw] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 This BUG is reproducible by repeating the blktests test case nvme/061 for the rdma transport and the siw driver. To avoid the use-after-free of cm_id_private work objects, ensure that the last reference to the cm_id is decremented not in the event handler works, but in the cm_id destruction context. For that purpose, mo ---truncated--- | |||||
| CVE-2025-38209 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: remove tag set when second admin queue config fails Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation") modified nvme_tcp_setup_ctrl() to call nvme_tcp_configure_admin_queue() twice. The first call prepares for DH-CHAP negotitation, and the second call is required for secure concatenation. However, this change triggered BUG KASAN slab-use-after- free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by repeating the blktests test case nvme/063 a few times [1]. When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain below: nvme_tcp_create_ctrl() nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set nvme_tcp_setup_ctrl() new=true nvme_tcp_configure_admin_queue() new=true ... Succeed nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set nvme_stop_keep_alive() nvme_tcp_teardown_admin_queue() remove=false nvme_tcp_configure_admin_queue() new=false nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set() nvme_uninit_ctrl() nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set The first call of nvme_tcp_configure_admin_queue() succeeds with new=true argument. The second call fails with new=false argument. This second call does not call nvme_remove_admin_tag_set() on failure, due to the new=false argument. Then the admin tag set is not removed. However, nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which has admin_tag_set field. Later on, the timeout handler accesses the admin_tag_set field and causes the BUG KASAN slab-use-after-free. To not leave the admin tag set, call nvme_remove_admin_tag_set() when the second nvme_tcp_configure_admin_queue() call fails. Do not return from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin" go-to label to call nvme_tcp_teardown_admin_queue() which calls nvme_remove_admin_tag_set(). | |||||
| CVE-2025-38187 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in r535_gsp_rpc_push() The RPC container is released after being passed to r535_gsp_rpc_send(). When sending the initial fragment of a large RPC and passing the caller's RPC container, the container will be freed prematurely. Subsequent attempts to send remaining fragments will therefore result in a use-after-free. Allocate a temporary RPC container for holding the initial fragment of a large RPC when sending. Free the caller's container when all fragments are successfully sent. [ Rebase onto Blackwell changes. - Danilo ] | |||||
| CVE-2025-38180 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: atm: fix /proc/net/atm/lec handling /proc/net/atm/lec must ensure safety against dev_lec[] changes. It appears it had dev_put() calls without prior dev_hold(), leading to imbalance and UAF. | |||||